Installation Ubuntu Server 14.04 LTS First Step : Booting use
media installation with USB Flashdisk or CD/DVD. After succes boot
from USB Flashdisk or CD/DVD, choose Install Ubuntu Server. And
then choose language ENGLISH.
Second Step : And then choose location. In this installation, we
choose Indonesia.
Because in this installation is used different combination for
configuration languages and configuration location, so we choose
standart setup like picture as below.
Third Step : Choose keyboard layout, if this installation
process show picture like as below. Select NO
Generally in Indonesia using keyboard layout English type, so we
choose also like that.
Fourth Step : Inspection of installation media and configuration
network. Next installation process will active media installation,
call the initial configuration, call installer component from media
installation, and setup network. In configuration network there is
two option setup, namely manual configuration network and automatic
configuration network.
If PC which will installed connect router. And the router
provides a DHCP service, so it will can automatic IP, netmask, and
gateway.
Fifth Step : Next step create new account and password.
Create new account user besides account root.
Configuration encrypt folder /home. Function from encrypt folder
namely make plain text became non-readable text.
Sixth Step : Configuration timezone, we chooose Jakarta.
Seventh Step : Hard disk partitioning. In hardisk partitioning
there is four option : Guided use entire diskHard disk partitioning
automatically done by the system. Guided use entire disk and set up
LVMHard disk partitioning automatically done by the system with LVM
(Logical Volume Manager) feature. Guided use entire disk and setup
encrypt LVMSame with guided use entire disk and set up LVM, but
partition will encrypted. So any other cannt read.
ManualHard disk partitioning do our own.In here we choose
Manual, the following is the partition that will be created. Root
partition (/) : largely program used in this partition. Boot
partition (/boot) : In this partition used for booting the first
time. Home partition (/home) : In this partition used for save all
your data. Swap partition (swap) : In this partition used for
virtual memory.As exampleHard disk : 32 GBAnd follow picture like
as below.TypeSizeLocationFileSystemMount
Primary20 GBBeginningext4/
Primary200 MBBeginningext4/boot
Logical10 GBEndext4/home
Primary2 GBBeginningswapswap
Like pictures as below not same with table as above, but it
adjusted only with your spesification computer.
Partitioning root (/)
Partitioning boot (/boot)
Partitioning home (/home)
Partitioning swap (swap)
Finishing partition
Eighth Step : Start installation process Ubuntu 14.04 LTS
Ninth Step : Configuration proxy, leave empty and then select
CONTINUE
Tenth Step : Configuration update process Ubuntu 14.04 LTS, in
here we choose installation OpenSSH and LAMP Server. If you will
select software, you use prees [spasi]+[enter].
Eleventh Step : Configuration MySQL password.
Twelfth Step : Install GRUB Loader
Thirteenth Step : Finishing the Installation.
Page 29 of 31www.7treesdigital.comSystem Development
Documentation