Documentation - skynet.beusers.skynet.be/Lakhovsky/Building LAKHOVSKY OSCILLATING...Documentation A good introduction of oscillating circuits can be found in the work mentioned below:

MultiWaveResearch http://users.skynet.be/Lakhovsky/OC.htm Page 1

Building LAKHOVSKY OSCILLATING CIRCUIT Replica

Documentation

A good introduction of oscillating circuits can be found in the work mentioned below:

- L'oscillation cellulaire, 1931, Gaston Doin et Cie – Lakhovsky

- Les Circuits Oscillants Servranx F & W.

- Arkologie magazine http://a-de.net/public/ark/revues/livre_04.pdf

First a word of warning: when you decide to buy an oscillating circuit offered at different

places by aware of unreliable reproductions.

An oscillating circuit consists of copper wire or tube in a ring shape which is

electrically open at one position. It is preferred to isolate the copper wire.

Preferably the insulation wire must is in transparent material.

Lakhovsky first invented an oscillating circuit based on a copper wire. Later he

improved it with multiple metals like copper and silver and other metals. However it is

better to have a oscillating circuit based on copper than having none.

http://a-de.net/public/ark/revues/livre_04.pdf


Building a replica oscillating circuit

An example is given how you can construct a replica oscillating circuit.

This picture below shows the required materials for a neckless model

Materials:

An insulated wire o Length 73cm o Surface of 4mm2 o 50/50 copper/silver or only copper o Preferably transparent insulation

A small tube, with internal diameter equal to the outer diameter of the insulated wire.


This picture below shows the assembled neckless model

Insert the wire in the tube, keeping 10mm of air between the two ends

Fixate the tube with glue


COLYSA original documents





Documentation - skynet.beusers.skynet.be/Lakhovsky/Building LAKHOVSKY OSCILLATING...Documentation A good introduction of oscillating circuits can be found in the work mentioned below:

Documents