(800) 433-2212 • Fax (817) 293-7570 9201 South Freeway • Fort Worth, TX 76140 www.bluffmanufacturing.com Container Ramps MODEL CR For: • Loading and unloading containers • Accessing ground level containers Red Pin Steel Dock Boards MODEL C For: • High to medium volume applications • Difficult trailer to dock positions • Park out situations Aluminum Dock Plates MODEL A/B For: • Non-powered pallet jack, hand truck and cart use • Corrosive environments Aluminum Dock Boards MODEL AC/BC For: • Low to medium volume applications • Corrosive environments Not for: • Below dock conditions Steel Truck Dock Boards MODEL T For: • Medium to high volume applications • Below dock conditions • Loading and unloading dock level containers • Higher capacity applications (15,000+) Steel Speedy Boards ® MODEL SB For: • High, medium or low volume applications • Increased productivity (operator does not need to dismount for placement) • Safety gains (operator does not need to leave the safety of the cage) Not for: • Below dock conditions All Aluminum Dock Boards MODEL ATD For: • Low to medium volume applications • Corrosive environments • Combustible environments • Lowest weight board available Not for: • Below dock conditions Steel Dock Boards MODEL SC For: • Low to medium volume applications • Lighter weight capacities (10-13,000K) Not for: • Below dock conditions DOCK BOARD, DOCK PLATE & CONTAINER RAMP SELECTION GUIDE 20160222
3
Embed
DOCK BOARD, DOCK PLATE & CONTAINER RAMP … · DOCK BOARD, DOCK PLATE & CONTAINER RAMP ... Choosing the correct ... Review the following chart to find the type of forklift and match
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
(800) 433-2212 • Fax (817) 293-75709201 South Freeway • Fort Worth, TX 76140
www.bluffmanufacturing.com
Container RampsMODEL CRFor:• Loading and
unloading containers • Accessing ground
level containers
Red Pin Steel Dock BoardsMODEL CFor:• High to medium
volume applications• Difficulttrailertodock
positions• Parkoutsituations
Aluminum Dock PlatesMODEL A/BFor:• Non-powered pallet jack,handtruckandcart use
• Corrosive environments
Aluminum Dock BoardsMODEL AC/BCFor:• Low to medium volume
applications• Corrosive environments
Not for:• Belowdockconditions
Steel Truck Dock BoardsMODEL TFor:• Medium to high volume
applications• Belowdockconditions• Loading and unloading docklevelcontainers
• Higher capacity applications(15,000+)
Steel Speedy Boards®
MODEL SBFor:• High,mediumorlow
volume applications• Increased productivity
(operator does not need to dismount for placement)
• Safety gains (operator does not need to leave thesafetyofthecage)
Not for:• Belowdockconditions
All Aluminum Dock BoardsMODEL ATDFor:• Low to medium volume
applications• Corrosive environments• Combustible
environments• Lowest weight board
available
Not for:• Belowdockconditions
Steel Dock BoardsMODEL SCFor:• Low to medium volume
DOCK BOARD, DOCK PLATE & CONTAINER RAMP SELECTION GUIDE
20160222
(800) 433-2212 • Fax (817) 293-75709201 South Freeway • Fort Worth, TX 76140
www.bluffmanufacturing.com
Height Differential Dock Plate Length1” 24”
2” 30”
3” 36”
4” 42”
5” 48”
6” 54”
7” 60”
8-8 1/2 72”
Height Differential Dock Board LengthPropaneForklift ElectricForklift
3 36” 36”
5 36” 48”
7 36” 60”
9 60” 78”
11 72” 90”
13 84” -
15 96” -
Choosing Length, Width and Capacity Choosingthecorrectlength,widthandcapacityofyourloadingdockequipmenthelpsimproveloadingdockoperations. The following guidelines will help determine theproperdockequipment.
LengthTodeterminetheproperdockboard,plateorramp,collect the following information:• DockorRampheight(D)• Heightofhighesttruck(T)(Note:moststandardtrailersare55”,mostrefrigeratedandcontainertrailersare59”)
• Typeofloadingequipmentused
Dock Board, Plate or Ramp LengthDockheight(D)andHeightofhighesttruck(T)willbeusedtocalculatetheHeightDifferential,whichdetermines the length of the board. To determine the heightdifferential,fillouttheHeightDifferentialchart.UsetheDockPlateandtheDockBoardorContainerRampChartsbelowtodetermineproperlength.
Dock Board, Plate and Ramp WidthBluff recommends a minimum product width of 12”-18”widerthantheoverallwidthoftheforkliftorpalletused.Forimprovedendloadingefficiency,considerincreasing board width. The diagram beside shows the extra room provided with increasing board width.
Dock Plate Dock Board or Container Ramp
Highest Truck Height TWe recommend using 55” for the T unless your customer saysotherwise,since55”isthemaximum height of most trailers. On refrigerated or container trailers use 59”.
Dock Height D(Youmustmeasurethis.)
Height Differential (Maximum) H
Height Differential
T = Inches
Inches
Inches
D =
H =
truckbed(approx.100”)
60” 72” 78” 84”Widths available:
(800) 433-2212 • Fax (817) 293-75709201 South Freeway • Fort Worth, TX 76140
Dock Board or Ramp CapacityTodeterminethepropercapacityforyourboardorramp,determinetheforkliftcapacitythatwillbeusingtheboardorramp.Reviewthefollowingcharttofindthetypeofforkliftandmatchthatwiththecorrectboard or ramp capacity.