1O1 S. E. 25th Avenue Mineral Wells, TX 76O67 8OO.553.15O7 (USA ONLY) p: 94O.325.33O1 f: 94O.325.O716 Pursuant to APC’s policy of continuous product improvement, specifications are subject to change without notice or obligation. Communication Solutions For A Wireless World e: [email protected] www.antennaproducts.com ELECTRICAL SPECIFICATIONS SPECS PERFORMANCE Frequency Range 960-1215 MHz (instantaneous bandwidth) VSWR (max) 1.8:1 max (50 Ω) Gain (Main Beam) 9.5 dBi typical, 8.5 dBi minimum Polarization Vertical Main Beam Elevation Pattern Beam Peak 3.5° + 1.5° above the horizon Azimuth Pattern 360° +/- 1 dB Azimuth Ripple +/- 0.5 dB Power Input 5 kW peak at 3% duty cycle MECHANICAL & ENVIRONMENTAL SPECIFICATIONS SPECS PERFORMANCE Connector (RF) N Female (qty 3) Connector (Monitor Port) N Female (2) -25 dB + 1 dB Connector (Power) MS3116E12-3S (for optional obstruction light) Mounting 3/8” bolts (6) on a 6” bolt circle Radome Fiberglass Color White Radome Diameter 2.43”O.D. Base Diameter 7 ” O.D. Length 77 5/8”(excludingObstructionLight) Weight 10 lbs Wind Survival 100 MPH (162 km) with 1” radial ice Lightning Protection Direct Ground Temperature -50°C - +70°C Environmental Meets FAA-G-2100c environment III, FAA-E- 2754 and MIL STD 810 Environmental Standards The DME-960 is an omni-directional UHF antenna designed for ground-to-air line-of-sight circuits used with distance measuring equipment (DME) systems. The 12 element array antenna is vertically polarized with an instantaneous bandwidth of 960-1215 MHz (no tuner) and has a 5000 watt peak power capacity at typical DME pulse duty cycle. The DME-960 has two coupling ports for signal monitoring. It is manufactured and operates in accordance with FAA-E-2996. The DME-960 is robust and designed for long-term, reliable operation. Also available with obstruction light as an option. Model : DME-960 DME-960 Distance Measuring Antenna • Omni-directional 960-1215 MHz Coverage • Vertically Polarized • Optimized for Distance Measuring Equipment (DME)