DM-05SSM3 stage, 5 gal. mixer, 3/8” shaft for 2-30 gal. drums, … · 2011-12-15 · For Industrial Drum, Tote and Tank Bung Holes Bung ThreadConverters Converts Buttress or Mauser

Quality Mixing with DRUM-MATES for the Factory, Field or Shop

Lowers the mixing batch time significantly Better & more accurate product quality control Blend a wide thickness range in most containers Control mixing pattern with adjustable blades Get superior liquid turnover at high or low Rpm

Mixer Shafts for Steel, Plastic or Fiber Pails, Drums, Totes & Tanks Bung entry mixers with 3 to 5 tier auto-open-close blades. Available in 3 alloys DM-05ZPM 3 stage, 5 gal. mixer, 3/8” shaft for 2-30 gal. drums, plated DM-05SSM 3 stage, 5 gal. mixer, 3/8” shaft for 2-30 gal. drums, 304 ss DM-55ZPM 4 stage, 55 gal. mixer, ½” shaft for 30-85 gal. drums, plated DM-55SSM 4 stage, 55 gal. mixer, ½” shaft for 30-85 gal. drums, 304 ss DM-600SSM 4-5 stage, 200-1000 gal. IBC (Tote) mixer 5/8” shaft, 304 ss DM-600SSM/HV 4-5 stage, 200-1000 gal. IBC (Tote) mixer 5/8” shaft, 304 ss DM-600SSM/2HV 4-5 stage, 200-1000 gal. IBC (Tote) mixer 5/8” shaft, 304 ss Tote, Drum & Pail Mixers Hand-held Pail & Drum Mixer Air Drives* ……….. For specific hand control & observation of mixing patterns & results

DM-45ADH .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 6.0 lbs. DM-55ADH 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 10 lbs. 2” NPT bung mount - permits unattended mixing in drums and IBC tanks

…… Bung Mount Drum & IBC Mixer Air Drives* DM-45ADH DM-55ADH DM-45BAS .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 12 lbs. DM-55BAS 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 13 lbs. Rim Mount Pail, Drum & Tank Mixer Air Drives* ………

Rim mount mixer for unattended mixing in open containers from 5 - 1000 gallons DM-45BAS DM-45RAS .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 11 lbs. DM-55RAS 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 12 lbs. DM-45RAS IBC/Tote/Tank, 200-1000 Gal. Mixer Air Drives* Mix with DM-600SSM, 5 stage SwingWing adjustable turbine blades Mounted on a double rail clamping stand, blends all levels simultaneously DM-200TAS .75 Hp air drive, 5-40 Cfm, 20-100 Psi, weight 47 lbs. DM-400TAS 1.5 Hp air drive, 10-70 Cfm, 40-100 Psi, weight 49 lbs. DM-600TAS 4.0 Hp air drive, 10-130 Cfm, 20-100 Psi, weight 52 lbs. DM-200TAS

*All air drives include variable Rpm control, muffler coupler and Allen wrench.

55 Gallon Drum Rollers, Tumblers and Multi-axis Rotators Ask about DRUM-MATES drum rollers and rotators for sealed, in-drum blending of dry or wet compounds including noxious, toxic, radioactive and other hazardous or non-hazardous materials.

DRUM-MATES equipment assemblies are provided as separate components each sold on a separate basis. Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum/IBC pumps & hand nozzles.

DRUM-MATES® Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034

DRUM-MATES Advanced Process Technology

Mix Most Solutions Mix Most Thicknesses Mix in Most Containers

Air Drive Benefits More Economical Variable Speed More Power (torque) Lower Weight Easier Maintenance

Drum Heaters Drum Dolly Base Heater Model DM-55HDD, For batch heating, heat sensitive, non-flammable, non-hazardous material for in-drum manufacturing or thinning liquids before mixing. 1,750 watt (at 120 volt, 14.6 amp) or a 1,920 watt (at 240 volt, 8 amp) using an ON/OFF, thermostatic heat pulsing action. 900 lb. capacity

Drum Full Wrap Heater Model # DM-55DWH/2, Double Zone Silicone Impregnated Fiberglass blanket wrap style drum heater for use indoors batch heating steel drums with heat sensitive, non-flammable, non-hazardous material for in-tote manufacturing or thinning liquids before mixing. A built-in, adjustable thermo-switch prevents temperature runaway. Each zone 4,500 watts, Temperature Ratings: Continuous Use, 450° F (232° C), 240V/1PH

Tote/Tank Heaters Tote Adjustable Full Wrap Heater for wire or tubular framed totes, all metal or plastic totes Model # DM-600FWH/A, Fits totes from 40x40” to 48x48” and 36”, 42”, 48” heights. Full wrap silicone impregnated fiberglass blanket wrap style tote heater for use indoors, batch heating steel drums with heat sensitive, non-flammable, non-hazardous material for manufacturing or thinning liquids before mixing. Built-in, adjustable thermostatic control prevents temperature runaway. Temperature Range: Continuous Use, 50-160° F (10-71° C), 120V/1440w, 240V/1PH/2880w, Optional insulated top cover. Tote Bottom Pad Heater for wire or tubular framed totes, all metal or plastic totes 32” X 36”, fiberglass reinforced silicone rubber bottom pad heater fits most totes, for uniform heat underneath tote/IBC, moisture and chemical resistant, for use indoors, batch heating heat sensitive, non-flammable, non-hazardous material for manufacturing or thinning liquids before mixing. With controlling thermocouple proportioning controller. Temperature: 180° F (82° C), 240 Volts, 3240 Watts

DRUM-MATES equipment assemblies are provided as separate components each sold on a separate basis. Ask for literature on DRUM-MATES drum & tote mixers, drum tumblers, drum/tote pumps & hand nozzles. DRUM-MATES® Inc., Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034

Quality Pumping with DRUM-MATES for the Factory, Field or Shop Electric/Pneumatic Drum/Tote Pumps Air Op. Double Diaphragm Pumps Hand Operated Drum Pumps 5 gallon to 900 gallon Capacity for Drum, IBC/Tank Liquid Transfer Piston, Rotary or Reciprocal for transferring almost any liquid

Complete kit, competitively priced…with low operating cost Safe for nonflammable liquids compatible with polypropylene Virtually maintenance free - no internal moving parts Transfers up to: 16 Gpm, 250 Cps (medium thick), 15 ft. head Replaces worn and faulty pumps very economically Corrosion proof - all polypropylene plastic wetted parts Stop cross contamination by using just one pump-per-product Increase operation productivity with nearby dispensing sites DM-85DGP Pump

DM-85HFR Hi-Flow DM-100HFR DM-600HFR DM-85APR DM-55BCF Coarse DM-55BEF DM-85CDH (PP) Polypropylene Polypropylene Aluminum or Stainless Mini-regulator ThreadConverters ThreadGuard Dispensing Hose.

DRUM-MATES equipment assemblies are provided as separate components, each sold on a separate basis. Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum & IBC pumps & hand nozzles. DRUM-MATES® Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034

Hand Nozzle Benefits & Features • Increase operator and environment safety with carefully regulated fluid transfer • Fine outflow control for gravity or pressure transfer from pumps, tanks & reservoirs • Simplify liquid dispensing tasks from small container repacking to bulk transfer • Choice of materials for chemical resistance: plastic, aluminum or stainless steel • Manual or auto shut-off helps prevent spillage during critical transfer operations • Quality manufactured hand nozzles built for years of use in a variety of applications

DM-85HFR Series Economical PP Nozzles, High-Flow, Very Good Chemical Resistance DM-85HFR/SV or HV polypropylene, stainless steel or Hastelloy and Viton DM-85HFR/SE or HE polypropylene, stainless steel or Hastelloy and EPDM Dispensing Flow Rate: 0 – 40 GPM, (0 – 150 litres) Operating Pressure Range: 0 – 150 PSI, (0 – 1050kPa) up to 155°F Hose Barb Sizes: Order choice of ½”, ¾”, or 1” hose barbs Optional Components: Maintenance Kit, Viton or EPDM (4 O-rings) ¾” flexible polypropylene dispensing hose DM-100HFR Series Heavy Duty PP Nozzles, Excellent Control and Chemical Resistance DM-100HFR__” Polypropylene & Viton wetted parts Dispensing Flow Rate: 0 – 25 GPM, (0 – 95 litres) Air Pressure Range: 0 – 40 PSI, (0 – 280kPa) up to 155°F MOC NOTE: polypropylene body with external stainless spring Hose Barb Sizes: Order choice of ½”, ¾”, or 1” hose barbs Optional Components: Maintenance Kit, Viton (4 O-rings) ¾” PP flexible dispensing hose

DM-600/900HFR Series Metal Nozzles, AL & SS, Heavy Duty, High Chemical Resistance DM-600HFR to 900HFR Series Numerous models to choose from! Materials of Construction: Aluminum, Stainless, Teflon, Viton, Buna, etc. Heavy wall construction: For extra operation strength and durability Nozzle Model Specifications:* Up to 50 Gpm, up to 80 Psi up to 120°F Extra large flow passages:* For low pressure drop and reduced foaming 1”, 1.5” or 2” NPT female base:* Connectors, barbs, swivels, available separately

DM-1000HFR Series Teflon Nozzles, Extreme Duty, Best Chemical Resistance DM-1000HFR Series Nozzles Numerous models to choose from! Materials of Construction: Teflon, Polypropylene, PVDF (Kynar) Heavy wall construction: For extra operation strength and durability Nozzle Model Specifications:* Up to 80 Gpm, up to 80 Psi (1/2” model) Extra large flow passage:* For low pressure drop and reduced foaming 1/2”, 3/4” or 1” NPT female base:* Connectors, barbs, available separately

Operation & Applications: *Features and characteristics may vary from model to model. Nozzles attach to various internal diameter transfer hoses. Flow rates may vary depending on design, viscosity, temperature and other variables. Nozzles dispense from a trickle flow to high pressure and volume dispensing from pumps or processing equipment depending on nozzle model and task.

For your selection convenience most DRUM-MATES equipment items are sold as separate components. Ask for DRUM-MATES literature on our drum & tote mixers, tumblers, pumps, & bung accessories. DRUM-MATES® Inc., Mixer & Pump Div., Tel: 800-621-3786, Tel: 609-261-1033, Fax: 609-261-1034

For Industrial Drum, Tote and Tank Bung Holes Bung ThreadConverters Converts Buttress or Mauser coarse threads to 2” NPT

Benefits: Permits easy and rapid mounting of fume filters, funnels, depth gauges, pumps, mixers and other equipment into drums, IBC's (Totes) or any container with 2” NPT or coarse bung threads. Temp. Range: -5°F min. to +120°F max

DM-55BCF/M (European standard) ThreadConverter hex Mauser male bung thread to 2" NPT female thread Mauser Specifications: 2.710” OD x 1.35 " H x 3.0" dia. flat-to-flat, Thread: 6.0 mm, HDPE, EPR DM-55BCF/B (American standard) ThreadConverter hex Buttress male bung thread to 2" NPT female thread Buttress Specifications: 2.525” OD x 1.812” H x 2.625" dia. flat-to-flat, Thread: 5.0 mm, HDPE DM-55BCF/FBC (Cam-Lock) ThreadConverter Buttress female bung thread to 2" Cam-Lock Buttress Specifications: 3.0” OD x 3.25” H x 1.625" ID, 5.0 mm pitch, reinforced nylon, Santoprene Bung ThreadGUARD Permanently protects plastic drum equipment threads Benefits: Stops stripping and wearing of sensitive plastic threads due to constant use in steel bung holes. Extends useful life of items like depth gauges, fume filters, pumps and other plastic bung mounting equipment. Permits easier equipment mounting. Items can be permanently sealed in ThreadGUARD. DM-55BTG/S6 Specifications: 2.0" Ht. x 2.85" OD, 2” NPT, 316 stainless steel, Wt. 12 oz. DM-55BTG Specifications: 2¾" Ht. x 2.75" OD, 2” NPT, zinc plated steel, Wt. 1.2 lbs. Drum Bung Adapters Permits process tube to be safely secured in drum bung Benefits: 2” NPT bung adapter, permits tube mounting in drum bung holes for

pump tubes, filling tubes, heating tubes and other shafts etc. to be safely secured inside a drum bung hole. Specify tube opening size and material of construction, PP or SS.

DM-55BA/SS Specifications: 1.375” Ht. x 1.630 ID x 2.0” MPT thread, 316 stainless steel, Wt. 0.8 lb DM-55BA/SS-SID to Spec: 1.375” Ht. x Spec. ID x 2.0” MPT thread, 316 stainless steel, Wt. 1.2 lb DM-55BA/PP Specifications: 1.375” Ht. x 1.630 ID x 2.0” MPT thread, polypropylene, Wt. 0.4 oz. DM-55BA/PP to Spec: 1.375” Ht. x Spec. ID x 2.0” MPT thread, polypropylene, Wt. 0.4 oz. Safety SplashCaps Improve bung entry mixing Quality Control in drums and totes Benefits: SplashCaps help prevent exposure to airborne contamination, moisture, dust, hazardous liquid splash-back, fume exposure etc. Helps seal bung hole during bung entry mixing or cleaning with DM-55MRT rinse tube. Description: Product Code Application Material Wt. DM-55SCC/MRT rinse tube cleaning with DM-55MRT plated steel 0.2 lbs. DM-55SCC/SD2__ steel drum mixing with DM-55ADH/A polyethylene 0.1 “ DM-55SCC/PDB2__ plastic drum mixing with DM-55ADH/A polyethylene 0.1 “ DM-55SCC/BAS bung mount mixing with DM-55BAS polyethylene 0.1 “ DRUM-MATES equipment assemblies are provided as separate components, each sold on a separate basis. Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum & IBC pumps & hand nozzles. DRUM-MATES® Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034