DIY Wooden bangle: olive green and gold

What you need:

Unfinished wooden bracelet

Olve green acryl ic paint

Antic gold acryl ic paint

Waterbase gloss varnish

Brushes

First, paint bracelet on both sides with ol ive green acryl ic paint.

Apply two coats, if needed.

Let it dry completely.

Apply one coat of golden acryl ic paint outside.

Be accurate on the edges!

Leave the bracelet ol ive green inside.

The coat of golden acryl ic paint have to be as thin as possible.

Use a paper towel to remove the excess paint, if needed.

Let it dry.

Apply few coats of waterbase gloss varnish inside and outside thebracelet.

Let each coat dry thoroughly.

Properly treat al l the edges with varnish.

Let it dry for 1 2-24 hours before wearing!