DIY Puppet Theatre INSTRUCTIONS 1. Print out your puppet theatre on three pieces of thick A4 paper or card, as in Fig A. 2. Using a crafts scissors, carefully cut out the areas shaded in grey (Fig A) 3. Line up the pages as in Fig B . 4. Use tape to stick the pages together, following the dotted red lines in Fig B. 5. Bend panels 1 and 3, so the puppet theatre stands up, as in Fig C. 6. Print and cut out the puppet figures, and get ready to host your own Royal Albert Hall performance! TOP TIP For extra support, mount the paper panels on some card. If you don’t have any to hand, take a look in your recycling - an empty cereal box is ideal! Requires adult supervision Fig A Fig B Fig C
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
-
DIY Puppet Theatre
INSTRUCTIONS1. Print out your puppet theatre on three pieces of thick A4 paper or card, as in Fig A.
2. Using a crafts scissors, carefully cut out the areas shaded in grey (Fig A)
3. Line up the pages as in Fig B .
4. Use tape to stick the pages together, following the dotted red lines in Fig B.
5. Bend panels 1 and 3, so the puppet theatre stands up, as in Fig C.
6. Print and cut out the puppet figures, and get ready to host your own Royal Albert Hall performance!
TOP TIPFor extra support, mount the paper panels on some card. If you don’t have any to hand, take a look in your recycling - an empty cereal box is ideal!
Requires adult supervision
Fig A
Fig B
Fig C
Related Documents
