How to Build a DIY Phone Charging Station / Dresser Valet | PINSPIRATION MOMMY PINSPIRATION MOMMY 1 DIY Phone Charging Station / Dresser Valet Free woodworking plans for building a wood cell phone charging station / dresser valet. • Cost: ~$25 • Difficulty: Easy
11
Embed
DIY Phone Charging Station / Dresser Valet · How to Build a DIY Phone Charging Station / Dresser Valet | PINSPIRATION MOMMY PINSPIRATION MOMMY 1 DIY Phone Charging Station / Dresser
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
How to Build a DIY Phone Charging Station / Dresser Valet | PINSPIRATION MOMMY
PINSPIRATION MOMMY 1
DIY Phone Charging Station / Dresser Valet Free woodworking plans for building a wood cell phone charging station / dresser valet.
• Cost: ~$25
• Difficulty: Easy
How to Build a DIY Phone Charging Station / Dresser Valet | PINSPIRATION MOMMY
PINSPIRATION MOMMY 2
TOOLS AND SUPPLIES:
Compound Miter Saw Brad Nail Gun 1 ¼” brad nails
Wood Glue Black felt adhesive sheets Varathane Weathered Wood Accelerator
Interior Polyurethane Spray – Gloss
Self-stick small round felt pads Wood filler
WOOD LIST:
Quantity Board Length
1 1x12 4'
1 1x4 6' (or scrap if available)
1 1x2 6'
1 1/4" x 1 1/4" lattice moulding 2'
1 11/16" cove moulding 48"
CUT LIST:
Quantity Board Cut Length
1 1x12 6"
1 1x4 6" with one end mitered to 20°
2 1x2 7 3/8" long end to long end with both ends
mitered to 45°
2 1x2 12 3/4" long end to long end with both ends
mitered to 45°
2 1x2 3/4" in length to long end with one end mitered
to 20°
2 1 1/4" x 1/4"
lattice moulding 6"
1 1 1/4" x 1/4" lattice
moulding 3 1/2"
2 11/16" cove
moulding
12 1/2" long end to long end with both ends
mitered to 45°
2 11/16" cove
moulding
7 1/4" long end to long end with both ends
mitered to 45°
How to Build a DIY Phone Charging Station / Dresser Valet | PINSPIRATION MOMMY
PINSPIRATION MOMMY 3
DIY Phone Charging Station/Dresser Valet Instructions
1.Using the miter saw, cut a 1x12 board to 6" in length.
2. Using the miter saw, cut the 1x2 boards that create the outer frame of the valet:
• Cut two 1x2 boards to 12 3/4" long-end to long-end, with each end mitered to 45°
• Cut two 1x2 boards to 7 3/8" long-end to long-end, with each end mitered to 45°
3. Use wood glue and the nail gun with 1 1/4" brad nails to attach the mitered 1x2 boards to the