DIY CLOSET Learn how to make a dressing station that provides more storage for clothes I bought a 4’ by 8’ sheet of 3/4” thick plywood from Home Depot. I had Home Depot associates cut the full sheet into 3 strips so that it would be easier to transport home. I made the remaining cuts with a circular saw. 1. Cut the Plywood 24” 14” 10” 66” 11” 10” 10” 10” Cut at Home Depot Cut at Home Depot Cut with Circular Saw Cut with Circular Saw Scrap Scrap Scrap A B C D D D I bought two 8’ long 2x4s from Home Depot and cut them to length with a circular saw. 2. Cut the 2x4s 10” 8” 8” 13” 66” Scrap Scrap E F G H H H H G 3. Assemble I screwed the pieces together using 2 1/4” long finish screws. I attached a 12” by 48” mirror using the hardware that it came with. I used a 3foot long 3/4” steel pipe with two flanges to make the rod for hanging clothes. Mirror 3/4” Steel Pipe with Flanges E A C D D D B F
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DIY CLOSETLearn how to make a dressing station that provides more storage for clothes
I bought a 4’ by 8’ sheet of 3/4” thick plywood from Home Depot. I had Home Depot associates cut the full sheet into 3 strips so that it would be easier to transport home. I made the remaining cuts with acircular saw.
1. Cut the Plywood
24”
14”
10”
66” 11”
10” 10” 10”
Cut at Home Depot
Cut at Home Depot
Cut with Circular Saw
Cut with Circular Saw
Scrap
Scrap
ScrapA B
C
DDD
I bought two 8’ long 2x4s from Home Depot and cut them to length with a circular saw.
2. Cut the 2x4s
10” 8” 8”
13”66”
Scrap
Scrap
E F
G H H
H
H
G
3. AssembleI screwed the pieces together using 2 1/4” long finish screws. I attached a 12” by 48” mirror using the hardware that it came with. I used a 3foot long 3/4” steel pipe with two flanges to make the rod for hanging clothes.
Mirror
3/4” Steel Pipe with Flanges
E
AC
D
D
D
B
F
Related Documents
