2013 Product Catalog
Mar 10, 2016
2013 Product Catalog
800.654.7224 phone • 800.256.3304 fax
CURED CONCRETEDRY OR WET
El Toro - Budget Series .....................................................................4Mustang - Budget Series ...........................................................4NCS - Value Series ...................................................................................4DSG - Charger Series ..........................................................................5DSLP18 - Signature Series...........................................................5
WET CURED CONCRETEHP10 - High Performance .........................................................6CP - Premium Series .............................................................................7Professional 4500 Series...............................................................7Traffic Loop Sawing ............................................................................7
ASPHALTDRY OR WET
El Toro - Budget Series .....................................................................8NCSA - Value Series ............................................................................8DSG71 - Charger Series ...................................................................8DSLP77 - Signature Series .........................................................9DSLP78 - Asphalt Overlay ......................................................9
WET ASPHALTHP90 - High Performance .................................................... 10AP90 - Premium Wet Asphalt ................................... 10
WET ASPHALT OVERLAYASPHALT OVER CONCRETE
HP100 - High Performance....................................................11AP100 - Premium Wet Asphalt Overlay ..........11
BRICK, PAVER & BLOCKDRY OR WET
NCSM - Value Series .........................................................................12DSG400 - Charger Series ..........................................................12DSLPU - Signature Series ..........................................................13
CONCRETE, BRICK, PAVERS, BLOCK, LANDSCAPE BLOCK & STONEDRY OR WET
Hardscaper ........................................................................................................ 14
CONCRETE, BRICK, BLOCK & ASPHALTDRY OR WET
Dual Blade ........................................................................................................... 15
SPECIALTY BLADESDRY OR WET
Vortex - Arranged Diamond Blade .............. 16DGC - Dry Green Concrete ................................................17 MP900 - Wet Refractory ............................................................17Pipe Cutter • Fire & Rescue..................................................18Ductile Iron ..........................................................................................................18Demolition Blade ....................................................................................18Ring Saw Blades ..................................................................................... 19Diamond Grinding Heads................................................ 19Grinding Inserts ....................................................................................... 19Segmented Cup Wheels ......................................................20Spiral Cup Wheels .............................................................................20Turbo Blades .....................................................................................................21Segmented Blades ..............................................................................21Tuck Pointing Blades ....................................................................22Split Tuck Pointing Blades .................................................22Crack Chasers .............................................................................................22Tile Saw Blades ........................................................................................23
CORE BITSBP - Premium Series .........................................................................24BS - Supreme Series ...........................................................................24BV Ultimate Series ..............................................................................25BV-U Ultimate Series .......................................................................25CBSP - Small Diameter ..............................................................26 BD - Dry Masonry Bit .....................................................................26BDX - Dry Masonry Bit Extreme ............................26Core Drilling Adaptors & Extensions ........ 27
EQUIPMENTCardi Hand Held Core Drills ........................................28Cardi Hand Held Drill Stands ...................................29Cardi Electric Hand Saw ....................................................29DMX20VE Core Drill Rig ........................................................30DDM13-18E Walk Behind Saw .......................................31Makita Hand Saw .............................................................................32
Table of Contents
3
www.dixiediamond.com
Welcome
Located just North of Atlanta our state of the art manufacturing facility produces blades up to 72 inches in diameter and core bits
up to 60 inches. Our product markets include the ARA, STAFDA and independent distributors. Also, we manufacture for professional
concrete cutters and various stone quarries nationwide. We appreciate your business and look forward to an exciting 2013!
DiscountsBlades
Bits
Equipment/Parts/AdaptersFreight is prepaid on blade and bit orders
of $400 or more. Freight prepaid and add on Equipment.
Greg Wolters Garrett Wolters
4
800.654.7224 phone • 800.256.3304 fax
Cu
red
Con
cret
eD
ry o
r W
et
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
Size Part Number List Price14” x .125” x 1-20mm LASER14 $172
Red Price indicates stock items
12mm Segment
Size Part Number List Price 10+ List Price12” x .110” x 1-20mm NCS12110 $193 $15014” x .110” x 1-20mm NCS14110 $246 $18614” x .125” x 1-20mm NCS14125 $282 $23016” x .125” x 1-20mm NCS16125 $333 $282
Red Price indicates stock items
.350” Diamond Depth
BUDGET SERIES
VALUE SERIES
BUDGET SERIES
Size Part Number List Price 10+ 20+12” x .125” x 1”-20mm 12SEG $98 $88 $78
12” x .125” x 20mm 12SEG20 $98 $88 $78
14” x .125” x 1”-20mm 14SEG $127 $114 $101
14” x .125” x 20mm 14SEG20 $127 $114 $101
12mm Segment
SINTERED SEGMENTS
LASER WELDED SEGMENTS FOR LONGER LIFE
5
www.dixiediamond.com
CHARGER SERIESC
ured
Con
creteD
ry or Wet
SIGNATURE SERIES
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
Size Part Number List Price12” x .110” x U/A DSG12110 $22814” x .110” x U/A DSG14110 $27914” x .125” x U/A DSG14125 $32316” x .125” x U/A DSG16125 $37518” x .125” x 1” DSG18125 $66120” x .140” x 1” DSG20140 $719
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
Size Part Number List Price10” x .110” x 5/8” - 1” DSLP1810110 $28012” x .110” x U/A DSLP1812110 $34312” X .125” X U/A DSLP1812125 $43712” x .187” x 1” DSLP1812187 $65012” x .250” x 1” DSLP1812250 $74414” x .110” x U/A DSLP1814110 $42414” x .125” x U/A DSLP1814125 $48114” x .187” x 1” DSLP1814187 $70914” x .250” x 1” DSLP1814250 $82716” x .125” x U/A DSLP1816125 $67418” x .125” x 1” DSLP1818125 $76820” x .140” x 1” DSLP1820140 $856U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
HIGHLIGHTS• DRYorWETcutwithalloftheseblades.• EQUIPMENTtobeusedisahigh-speedhand-held
saw,masonrysawor5-13HPconcretesaw.• OTHER MATERIALStocutinclude;brickpavers,
retainingwallblockandprecast.
6
800.654.7224 phone • 800.256.3304 fax
Wet
Cu
red
Con
cret
eHP10 - HIGH PERFORMANCE
Size Part Number List Price14” x .110” x 1” HP1014110 $402
14” x .125” x 1” HP1014125 $432
16” x .125” x 1” HP1016125 $508
18” x .125” x 1” HP1018125 $567
20” x .140” x 1” HP1020140 $591Red Price indicates stock items
.300” Diamond Depth
5-13 HorsepowerHP10 is uniquely designed for aggressive, fast-cutting of cured concrete in wet applications. 1.5” long segments create extended blade life and maximum cutting speed. Diamond depth of .300” includes high quality diamond and powder matrix providing maximum inch footage.
GREAT FORELECTRIC SLAB SAWS!
35-72Horsepower
.450” Diamond Depth
7
www.dixiediamond.com
TRAFFIC LOOP SAWING
Wet C
ured
Con
crete
.250” Diamond Depth
CP Premium Series Pro C4518
Size Part # Part # List Price14” x .125” CP1014125 CP2014125 $49014” x .140” CP1014140 CP2014140 $57216” x .125” CP1016125 CP2016125 $62516” x .140” CP1016140 CP2016140 $70718” x .125” CP1018125 CP2018125 $84118” x .140” CP1018140 CP2018140 $90620” x .140” CP1020140 CP2020140 $98120” x .155” CP1020155 CP2020155 $98624” x .155” CP1024155 CP2024155 $1,17824” x .187” CP1024187 CP2024187 $1,37126” x .155” CP1026155 CP2026155 $1,30726” x .187” CP1026187 CP2026187 $1,53530” x .187” CP1030187 CP2030187 $1,68230” x .250” CP1030250 CP2030250 $2,13036” x .187” CP1036187 CP2036187 $2,277
Red Price indicates stock items
CP10Very hard aggregates, bridge deck, and heavy reinforcement
CP20Medium to hard aggregates with moderate reinforcement
Size Part Number14 X .125” C45181412514 X .140” C45181414016 X .125” C45181612516 X .140” C45181614018 X .125” C45181812518 X .140” C45181814018 X .155” C45181815520 X .140” C45182014020 X .155” C45182015524 X .155” C451824155R24 X .187” C451824187R26 X .155” C451826155R26 X .187” C451826187R30 X .187” C451830187R30 X .250” C451830250R36 X .187” C451836187R
CALL FOR PRICING!
The professional Wet Cured Concrete blades are manufactured with the highest quality raw materials for exceptional performance. The Professional Series bond is designed to cut hard aggregate with heavy reinforcement on 65 HP saws or greater. This product line will give the contractor the lowest cost per inch foot.
Softer Bond -----------> Harder Bond
BLADE DIAMETER
# OF SEGM. TYPE QUANTITY Concrete
(DB104/103)Asphalt(DB428/429) List Price
14 X 187 20 VI 10 TLC14187 TLA14187 $775
14 X 220 20 VI 10 TLC14220 TLA14220 $944
14 X 250 20 VI 10 TLC14250 TLA14250 $975
14 X 312 24 VI 12 TLC14312 TLA14312 $981
14 X 375 24 VI 12 TLC14375 TLA14375 $1,200
14 X 500 24 VI 12 TLC14500 TLA14500 $1,427
Blades have Vertical Inserts for Longer Life.
8
800.654.7224 phone • 800.256.3304 fax
Asp
ha
ltD
ry o
r W
et
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
BUDGET SERIES
CHARGER SERIES
VALUE SERIES
Size Part Number List Price
14” x .125” x 1”-20mm AE14125 $186
14” x .125” x 20mm AE1412520 $186
Red Price indicates stock items
Size Part Number List Price 10+ Price*
12” x .110” x U/A NCSA12110 $193 $150
14” x .125” x U/A NCSA14125 $282 $230
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
Size Part Number List Price
12” x .110” x U/A DSG7112110 $228
14” x .125” x U/A DSG7114125 $323
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
9
www.dixiediamond.com
SIGNATURE SERIESA
sph
alt
Dry or W
et
DSLP78 - ASPHALT OVERLAY
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
SLANT SEGMENTS are standard core protection on Premium Product.
Note slantsegment designfor undercut protection(to protect core from wear)
Size Part Number List Price
12” x .110” x U/A DSLP7712110 $343
12” x .125” x U/A DSLP7712125 $437
14” x .110” x U/A DSLP7714110 $424
14” x .125” x U/A DSLP7714125 $481
14” x .187” x 1” DSLP7714187 $709
14” x .250” x 1” DSLP7714250 $827
16” x .125” x U/A DSLP7716125 $674
18” x .125” x 1” DSLP7718125 $768
20” x .140” x 1” DSLP7720140 $856
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
Size Part Number List Price
14” x .110” x U/A DSLP7814110 $424
14” x .125” x U/A DSLP7814125 $481
14” x .187” x 1” DSLP7814187 $709
14” x .250” x 1” DSLP7814250 $827
16” x .125” x U/A DSLP7816125 $674
18” x .125” x 1” DSLP7818125 $768
20” x .140” x 1” DSLP7820140 $856
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
DRY OR WET CUTTINGOF ASPHALT ON TOP
OF CONCRETE
10
800.654.7224 phone • 800.256.3304 fax
HP90 - HIGH PERFORMANCE
AP90 - PREMIUM WET ASPHALT
Size Part Number List Price
14” x .125” HP9014125 $432
16” x .125” HP9016125 $508
18” x .125” HP9018125 $567
20” x .140” HP9020140 $591
Red Price indicates stock items
.350” Diamond Depth
5-13 HorsepowerHP90 - General purpose bond for asphalt.
Wet
Asp
ha
lt
Note slantsegment design
for undercut protection(to protect core from wear)
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
Also see Traffic Loops on Page 7.
Size # of Slants Part # - AP90 List Price14” x .125” 3 AP9014125 $51814” x .140” 3 AP9014140 $69116” x .125” 4 AP9016125 $69716” x .140” 4 AP9016140 $75118” x .125” 4 AP9018125 $85618” x .140” 6 AP9018140 $92620” x .140” 6 AP9020140 $94420” x .155” 6 AP9020155 $94824” x .155” 4 AP9024155 $1,08224” x .187” 4 AP9024187 $1,26426” x .155” 4 AP9026155 $1,20026” x .187” 4 AP9026187 $1,40730” x .187” 5 AP9030187 $1,53330” x .250” 5 AP9030250 $1,95136” x .187” 6 AP9036187 $2,08336” x .250” 6 AP9036250 $2,500
Red Price indicates stock items
.250” Diamond Depth
11
www.dixiediamond.com
HP100 - HIGH PERFORMANCE
AP100 - PREMIUM WET ASPHALT OVERLAY
Size Part Number List Price
14” x .125” HP10014125 $432
16” x .125” HP10016125 $508
18” x .125” HP10018125 $567
20” x .140” HP10020140 $591
Red Price indicates stock items
.350” Diamond Depth
5-13 HorsepowerHP100 - Asphalt Overlay is when a concrete base is paved over or topped with a few inches of asphalt.
Note slantsegment design
for undercut protection(to protect core from wear)
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
Size # of Slants Part # - AP100 List Price14” x .125” 3 AP10014125 $51814” x .140” 3 AP10014140 $69116” x .125” 4 AP10016125 $69716” x .140” 4 AP10016140 $75118” x .125” 4 AP10018125 $85618” x .140” 6 AP10018140 $92620” x .140” 6 AP10020140 $94420” x .155” 6 AP10020155 $94824” x .155” 4 AP10024155 $1,08224” x .187” 4 AP10024187 $1,26426” x .155” 4 AP10026155 $1,20026” x .187” 4 AP10026187 $1,40730” x .187” 5 AP10030187 $1,53330” x .250” 5 AP10030250 $1,95136” x .187” 6 AP10036187 $2,08336” x .250” 6 AP10036250 $2,500
Red Price indicates stock items
.250” Diamond Depth
Wet A
sph
alt O
verlay
Asp
ha
lt Over C
oncrete
12
800.654.7224 phone • 800.256.3304 fax
VALUE SERIES
CHARGER SERIES
Bri
ck a
nd
Blo
ckD
ry o
r W
et
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
1 0 2 3 4 6 7 8 9 10 5
Application Performance
Cured Concrete
Green Concrete
Asphalt
Block
Brick & Pavers
Size Part Number List Price 10+12” x .110” x 1-20mm NCSM12110 $193 $150
14” x .110” x 1-20mm NCSM14110 $246 $186
14” x .125” x 1-20mm NCSM14125 $282 $230
20” x .140” x 1 NCSM20140 $388 -Red Price indicates stock items
.350” Diamond Depth
Size Part Number List Price12” x .110” x U/A DSG40012110 $22814” x .110” x U/A DSG40014110 $27914” x .125” x U/A DSG40014125 $32316” x .125” x U/A DSG40016125 $37518” x .125” x 1 DSG40018125 $59520” x .140” x 1 DSG40020140 $637U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
.350” Diamond Depth
13
www.dixiediamond.com
SIGNATURE SERIESB
rick, Pa
ver & Block
Dry or W
etDSLPU 100
Brick • Clay • Concrete Pavers
DSLPU 400Paver • Landscape Block
Brick • Block
DSLPU 700Low Density Concrete Block
Abrasive
Size Part Number List Price
10” x .110” x 5/8 -1” DSLPU10010110 $225
12” x .110” x U/A DSLPU10012110 $296
14” x .115” x U/A DSLPU10014115 $374
20” x .140” x 1” DSLPU10020140 $713
24” x .155” x 1” DSLPU10024155 $901
GREAT FORGRANITE
GREAT FORGRANITE
Size Part Number List Price
10” x .110” x 5/8 -1” DSLPU40010110 $225
12” x .110” x U/A DSLPU40012110 $296
14” x .115” x U/A DSLPU40014115 $374
20” x .140” x 1” DSLPU40020140 $713
24” x .155” x 1” DSLPU40024155 $901
Brick Paver
Brick PaverLandscape
Block Block
U Segment
U Segment
U Segment
Anchor Slot
Anchor Slot
Anchor Slot
Block
Size Part Number List Price10” x .110” x 5/8 -1” DSLPU70010110 $225
12” x .110” x U/A DSLPU70012110 $296
14” x .115” x U/A DSLPU70014115 $374
20” x .140” x 1” DSLPU70020140 $713
24” x .155” x 1” DSLPU70024155 $901
14
800.654.7224 phone • 800.256.3304 fax
Brick PaverLandscape
Block Block Stone
Concrete, Brick, Pavers, Block, Landscape Block & Stone
HARDSCAPERC
oncr
ete,
Bri
ck, P
ave
rs, B
lock
, La
nd
sca
pe
Blo
ck &
Sto
ne
Dry
or
Wet
Size Part Number List Price
12” x .110” x U/A HS12110 $273
14” x .125” x U/A HS14125 $344
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
Sugested Types of Stone Includes:• Fieldstone• Flagstone
• Limestone• Slate
15
www.dixiediamond.com
Brick AsphaltLandscape
Block Block Concrete
Concrete, Asphalt, Brick & Block
DUAL BLADE
Note: If cutting Asphalt or Block ONLY, we recommend a material specific blade: Asphalt (pg. 8-9), Block (pg. 13).
Con
crete, Brick
, Block &
Asp
ha
ltD
ry or Wet
Size Part Number List Price
12” x .110” x U/A DUAL12110 $283
14” x .110” x U/A DUAL14110 $313
14” x .125” x U/A DUAL14125 $369
16” x .125 x U/A DUAL16125 $494
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
16
800.654.7224 phone • 800.256.3304 fax
VORTEX BLADEArranged Diamond
Tech Notes•Arranged Diamond: Arranged diamonds have been proven in some applications to provide as much
as 50% faster cutting and increased blade life.
•Increases Blade Life: Arranged diamonds allow the diamonds to be used more efficiently due to reduced force on each diamond. This will allow better use of these diamonds helping to increase blade life.
•Increases Versatility: Arranged diamond blades allow greater versatility in cutting a wider range of products due to none-redundant method of diamond distribution
•Preferred application: Because the amount of diamonds are limited to the spacing of the diamonds this makes them more suitable for dry cutting with high speed saws and low HP saws.
•Cool Blade: Grooves between the diamonds will form during cutting in a very uniform fashion reducing excess friction and allowing the blade run cooler than normal.
•Side clearance protection: The array of diamond on the outside face of segments act like a gauge protector. This prevents the blade from losing side clearance prematurely
Cured Concrete & General Purpose
Vor
tex
Bla
de
Dry
or
Wet
Size Part Number List Price
14” X .125” X 1” VORTEX14 $360
16” X .125” X 1” VORTEX16 $422
0.400” Diamond Depth
17
www.dixiediamond.com
DGC - DRY GREEN CONCRETE
MP900 - WET REFRACTORY
Tech Notes•Use DGC blades for early entry sawing when concrete is less
than 24 hours old.•Concrete less than 48 hours old generally cuts as green
concrete.•Concrete older than 48 hours generally cuts as cured concrete.•Arbor is 1” with 7/8” and 5/8” adaptors on 7”, 8”, 9” and 10”
blades.
Refractory brick are typically harder and denser than standard brick. They usually contain additives like alumina and silica to make them more resistant to heat and/or chemicals. These bricks are used in furnaces, chimneys, kilns, ovens, and places of high acidity.
Specia
lty Blad
esD
ry an
d W
etSize Part Number List Price
7” x .100” x 1” DGC7 $236
8” x .100” x 1” DGC8 $255
9” x .100” x 1” DGC9 $272
10” x .110” x U/A DGC10110 $279
12” x .110” x U/A DGC12110 $361
12” x .125” x U/A DGC12125 $378
14” x .110” x U/A DGC14110 $419
14” x .125” x U/A DGC14125 $449
U/A = Universal Arbor 1” to 20mm Red Price indicates stock items
Size Part Number List Price
12" X .110" X 1" MP90012110 $378
14" X .110" X 1" MP90014110 $508
14" X .125" X 1" MP90014125 $533
18" X .125" X 1" MP90018125 $693
20" X .140" X 1" MP90020140 $874
24" X .140" X 1" MP90024140 $932
18
800.654.7224 phone • 800.256.3304 fax
Steel, PVC Pipe, Ductile Iron, Cast Iron, Rebar, Fiber Board, Fiberglass, Copper, Concrete,
Masonry, Stone, Stucco, Wood, HDPE
Cuts ductile iron and cast ironTurbo segments help cool blade
Use on high speed saws
Cuts: drywall, wood, fire doors, sheet metal, auto body panels, etc.
PIPE CUTTING • FIRE & RESCUE
DEMOLITION
DUCTILE IRON
Spec
ialt
y Bl
ad
esFi
re &
Res
cue,
Du
ctil
e, D
emol
itio
nSize Part Number List Price
4” X .080” X 7/8” PC4PLAIN $674.5” X .080” X 7/8” PC4.5PLAIN $727” X .095” X U/A PC7PLAIN $12912” X .125” X 1” PC12* $33512” X .125” X 20mm PC1220* $33514” X .125” X 1 PC14* $41714” X .125” X 20mm PC1420* $41716” X .125” X 1” PC16* $56016” X .125” X 20mm PC1620* $560
PLAIN means cores do not have silicon carbide coating Red Price indicates stock items
Special Segment DesignFast Cutting and Cooling
*Silicon Carbide to Eliminate Pinching
Size Part Number List Price12” x .100” x 1” DUCT12 $26012” x .100” x 20mm DUCT1220 $26014” x .100” x 1” DUCT14 $31714” x .100” x 20mm DUCT1420 $31716” x .125” x 1” DUCT16 $38616” x .125” x 20mm DUCT1620 $386
Red Price indicates stock items
Size Part Number List Price14” x .150” x 1”/20mm DEMO14150 $685
Red Price indicates stock items
The DEMO BLADE is a segmented blade with carbide chips designed to cut through a wide variety of materials.Perfect for: Roofers, Demo Crews, Renovators, Landscapers, Rescue Units, Wrecker and Recycle Companies
19
www.dixiediamond.com
RING SAW BLADES
CGH - GRINDING HEADS
DGI - DIAMOND GRINDING INSERTS
Specia
lty Blad
esSize Part Number List Price
14” x .165” Medium Bond RING14165 $401
14” x .220” Medium Bond RING14220 $426
14” x .165” Soft Bond RING14165-S $401
14” x .235” Soft Bond RING14235-S $426
Drive Wheel DRIVE14 $47
Tech Notes•Wet cutting diamond blade for all ring saw applications•Offers a 10” cutting depth•Use for precutting or following chain cuts•Available with or without drive wheel
CGH - Diamond Concrete Grinding Heads are used for grinding concrete and finishes from floors. Hole pattern is designed to fit most floor grinding machines. 4 holes are 3/8” - 24 fine machine thread, and other 4 holes are 25/64” countersunk. Arbor is 3/4”.
The DGI Grinding Shoe Inserts are designed for replacement of the original shoes and bridges used on floor grinders. These inserts are for removing thin layers of coatings without clogging. Grinding Inserts can also be used for smoothing rough, uneven or patched slabs of concrete. Additional applications include leveling and feathering.
Item Part # NewMedium to Hard Concrete
10 Segmented Head CGH10 $398
20 Segmented Head CGH20 $569
Abrasive Concrete, Green Concrete or Asphalt
10 Segmented Head CGH10A $398
20 Segmented Head CGH20A $569
Item Description List PriceDGI 1 Grinding Shoe Insert $195
DGI6 6 Pack Grinding Shoe Inserts $1,009Red Price indicates stock items
20
800.654.7224 phone • 800.256.3304 fax
Cu
p W
hee
lsSEGMENTED CUP WHEELS
SPIRAL CUP WHEELS
ECONOMYNon-Threaded Threaded
Size Item Price Size Item Price4” x 1 row x 7/8” - 5/8” ECG14 $48 4” x 1 row x 5/8” - 11” ECG14THRD $484” x 2 rows x 7/8” - 5/8” ECG24 $58 4” x 2 rows x 5/8” - 11” ECG24THRD $587” x 1 row x 7/8” - 5/8” ECG17 $104 7” x 1 row x 5/8” - 11” ECG17THRD $1047” x 2 rows x 7/8” - 5/8” ECG27 $145 7” x 2 rows x 5/8” - 11” ECG27THRD $145
STANDARDNon-Threaded Threaded
Size Item Price Size Item Price4” x 1 row x 7/8” - 5/8” SCG14 $97 4” x 1 row x 5/8” - 11” SCG14THRD $974” x 2 rows x 7/8” - 5/8” SCG24 $147 4” x 2 rows x 5/8” - 11” SCG24THRD $1477” x 1 row x 7/8” - 5/8” SCG17 $171 7” x 1 row x 5/8” - 11” SCG17THRD $1717” x 2 rows x 7/8” - 5/8” SCG27 $220 7” x 2 rows x 5/8” - 11” SCG27THRD $220
PREMIUMNon-Threaded Threaded
Size Item Price Size Item Price4” x 1 row x 7/8” - 5/8” DCG14 $135 4” x 1 row x 5/8” - 11” DCG14THRD $1354” x 2 rows x 7/8” - 5/8” DCG24 $197 4” x 2 rows x 5/8” - 11” DCG24THRD $1977” x 1 row x 7/8” - 5/8” DCG17 $220 7” x 1 row x 5/8” - 11” DCG17THRD $2207” x 2 rows x 7/8” - 5/8” DCG27 $306 7” x 2 rows x 5/8” - 11” DCG27THRD $306
PREMIUMNon-Threaded Threaded
Size Item Price Size Item Price4” x 9 SEGS. x 7/8” - 5/8” SPC49 $129 4” x 9 SEGS. x 5/8” - 11” SPC49THRD $1294” x 18 SEGS. x 7/8” - 5/8” SPC418 $155 4” x 18 SEGS. x 5/8” - 11” SPC418THRD $1557” x 12 SEGS. x 7/8” - 5/8” SPC712 $168 7” x 12 SEGS. x 5/8” - 11” SPC712THRD $1687” x 24 SEGS. x 7/8” - 5/8” SPC724 $181 7” x 24 SEGS. x 5/8” - 11” SPC724THRD $181
ThreadedNon-Threaded
21
www.dixiediamond.com
Tu
rbo &
Segm
ented
Bla
des
TURBO BLADES
SEGMENTED BLADES
SizeBudget Series Standard Series Premium Series
Part # List Price Part # List Price Part # List Price4” x .080” x 7/8” - 5/8” 4TURBO $24 TR4 $40 TP4 $704.5” x .080” x 7/8” - 5/8” 4.5TURBO $30 TR4.5 $53 TP4.5 $815” x .080” x 7/8” - 5/8” 5TURBO $35 TR5 $59 TP5 $996” x .080” x 7/8” - 5/8” 6TURBO $40 TR6 $70 TP6 $1177” x .090” x DM7/8”-5/8” 7TURBO $53 TR7 $81 TP7 $1418” x .090” x DM7/8”-5/8” 8TURBO $65 TR8 $117 TP8 $1769” x .090” x DM7/8”-5/8” 9TURBO $70 TR9 $141 TP9 $20410” x .090” x DM7/8”-5/8” 10TURBO $99 TR10 $176 TP10 $23412” x .110” x 1” 12TURBO $135 TR12 $234 TP12 $35114” x .110” x 1” 14TURBO $152 TR14 $315 TP14 $433
Red Price indicates stock items
Red Price indicates stock items
Turbos are designed for use on circular saws and grinders to cut a wide range of material. Excellent for cutting hard materials including: concrete with wire mesh and smooth, chip-free cutting of various stone.
Small Segmented Blades are designed for use on circular saws and grinders to cut a wide range of material. Excellent for cutting concrete and masonry materials.
SizeBudget Series Standard Series Premium Series
Part # List Price Part # List Price Part # List Price4” x .080” x 7/8” - 5/8” 4SEG $24 SS4 $40 SR4 $684.5” x .080” x 7/8” - 5/8” 4.5SEG $30 SS4.5 $47 SR4.5 $795” x .080” x 7/8” - 5/8” 5SEG $35 SS5 $59 SR5 $966” x .080” x 7/8” - 5/8” 6SEG $40 SS6 $70 SR6 $1187” x .090” x DM7/8”-5/8” 7SEG $53 SS7 $81 SR7 $1428” x .090” x DM7/8”-5/8” 8SEG $65 SS8 $106 SR8 $1869” x .090” x DM7/8”-5/8” 9SEG $70 SS9 $117 SR9 $20910” x .090” x DM7/8”-5/8” 10SEG $99 SS10 $164 SR10 $23212” x .125” x U/A 12SEG $98 - - - -14” x .125” x U/A 14SEG $127 - - - -
22
800.654.7224 phone • 800.256.3304 fax
TUCK POINTING BLADES
SPLIT TUCK POINTING BLADES
CRACK CHASERS
Tu
ck P
oin
ts &
Cra
ck C
ha
sers
SizeBudget Series Standard Series Premium Series
Item Price Item Price Item Price4” x .250” x 7/8” - 5/8” 4TUK $36 TUK104 $99 TUK204 $1284” x .375” x 7/8” - 5/8” TUK204375 $2114” x .500” x 7/8” - 5/8” TUK204500 $2364.5” x .250” x 7/8” - 5/8” 4.5TUK $41 TUK104.5 $135 TUK204.5 $1524.5” x .375” x 7/8” - 5/8” TUK204.5375 $2315” x . 250” x 7/8” - 5/8” 5TUK $56 TUK105 $158 TUK205 $1875” x .375” x 7/8” - 5/8” TUK205375 $2697” x . 250” x 7/8” - 5/8” 7TUK $91 TUK107 $186 TUK207 $2237” x .375” x 7/8” - 5/8” TUK207375 $4018” x . 250” x 7/8” - 5/8” TUK108 $211 TUK208 $258
TUK10 and TUK20 blades are used to remove mortar from masonry joints using hand held tools. Choose your grade based on the size of your job and the frequency of use. TUK20 has better blade life.
TUK10S: Split Tuck Point blade is designed for the removal of old mortar in masonry joints using hand-held tools. The Split blade design allows for a much faster rate of removal providing for more productivity on the job.
Size Part Number Price4” x .250” x 7/8-5/8” TUK10S TUK104S $76
4.5” x .250” x 7/8-5/8” TUK10S TUK104.5S $99
Red Price indicates stock items
Size Part Number List Price4” x .375” x 7/8” - 5/8” CCS4375 $145
4” x .375” x 7/8” - 5/8” CCS4375THRD $145
4” x .500” x 5/8” - 11 Thread CCS4500THRD $197
5” x .375” x 7/8” - 5/8” CCS5375 $217
7” x .375” x 7/8” - 5/8” CCS7375 $290
7” x .500” x 7/8” - 5/8” CCS7500 $331
8” x .375” x 7/8” - 5/8” CCS8375 $321
Red Price indicates stock items
•Use to widen cracks in concrete
•Tapered segment•Available with
5/8” - 11 thread•Add “THRD” to
part number
23
www.dixiediamond.com
Tile Bla
des &
Tile Saw
TILE SAW BLADES
DDMPT - PRO TILE SAW
Red Price indicates stock items
Smooth continious rims provide chip free cutting.Materials to cut with tile blades:•Wall,Floorand
Counter top tile•Ceramic
•Porcelain•Glass•NaturalStone
SizeBudget Series Standard Series Premium Series
Dry Wet Price Dry Wet Price Wet Price4” x .060” x 7/8” - 5/8” T604 T104 $35 T704 T204 $40 - -4.5” x .060” x 7/8” - 5/8” T604.5 T104.5 $40 T704.5 T204.5 $47 - -5” x .060” x 7/8” - 5/8” T605 T105 $43 T705 T205 $51 - -6” x .060” x 5/8” T606 T106 $53 T706 T206 $59 T1006 $1067” x .060” x 5/8” T607 T107 $70 T707 T207 $81 T1007 $1178” x .060” x 5/8” T608 T108 $76 T708 T208 $88 T1008 $1289” x .060” x 5/8” T609 T109 $79 T709 T209 $99 - -10” x .060” x 5/8” T6010 T1010 $88 T7010 T2010 $111 T10010 $16412” x .080” x 1” T6012 T1012 $176 T7012 T2012 $211 T10012 $27914” x .080” x 1” T6014 T1014 $223 T7014 T2014 $245 T10014 $322
Great for Rental!Motor 115V / 60Hz
Horsepower 1-½ hp
Blade RPM 2330
Blade Capacity 10” (254mm)
Arbor Size 5/8” (16mm)
Depth of Cut 3-3/4” (96mm)
Weight 111 lbs
LxW (inches) 35” x 22”
OPTIONAL STAND
P# PTE-STAND $75
Shown with Optional Stand
Features• 2 Position tray allows for 12” diagonal and
20” long cuts• Shielded Bearings for smoother cuts• Positive drive timing belt system delivers
max power• Oversized rolling table to support larger
size tiles• Electric water pump with adjustable flow
List Price: $1275plus shipping
PART#: DDMPTE
24
800.654.7224 phone • 800.256.3304 fax
CORE BITSW
et C
ore
Bit
s Diam. CoringDepth
IdealRPM
# ofSeg
2” 14” 1600 4
2-1/4” 14” 1600 5
2-1/2” 14” 1600 6
3” 14” 1050 7
3-1/2” 14” 1050 7
4” 14” 800 9
4-1/4” 14” 800 9
4-1/2” 14” 800 9
5” 14” 640 11
5-1/2” 14” 640 11
6” 14” 530 12
6-1/2” 14” 530 13
7” 14” 450 14
8” 14” 400 14
9” 14” 400 15
10” 14” 320 16
12” 15” 265 19
14” 17” 225 22
16”* 18” 200 25
18”* 20” 175 28
20”* 22” 160 32
24”* 22” 130 38
Hub Size2” - 24” = 1-1/4” - 7 Threaded
Extended Lengths In Stock!Call Factory for 26” & Above!
*Note Spoke Back Hub Design
BOND SELECTION (for all BP & BS)10: Hard aggregate/heavy rebar/faster speeds30: Abrasive materials (asphalt/green concrete)
BP Premium.250” dd
$252$269$302$355$409$475$511$583$621$684$749
$1,039$1,054$1,093$1,320$1,331$1,566$1,912$2,184$2,479$2,708$3,420
BS Supreme.275” dd
$285$305$317$407$453$504$599$652$712$786$857
$1,095$1,156$1,193$1,449$1,505$1,686$2,062$2,290$2,664$2,936$3,607
Red Price indicates stock items
Long Life Longer Life
25
www.dixiediamond.com
CORE BITSV GROOVE U SEG
• Fast Drilling Due to Reduced Friction and Surface Contact
• More Power to the Tips• V-Groove Eliminates Bit
Walking During Hole Start
• Fast Drilling Bond with Excellent Life
• U-Shape Design Increases Coring Speed
• Reduced Surface Contact Allows Fastest Drilling
• V-Groove Eliminates Bit Walking During Hole Start
• Great for Use With Hand Held Drills
• Most Power to Tips
Wet C
ore Bits
NOMINAL OD
DRILL DEPTH
# OF SEGMENTS
2” 14 42-1/4” 14 52-1/2” 14 62-3/4” 14 63” 14 73-1/4” 14 73-1/2” 14 74” 14 94-1/4” 14 94-1/2” 14 94-3/4” 14 105” 14 115-1/2” 14 115-3/4” 14 116” 14 126-1/4” 14 127” 14 148” 14 149” 14 1510” 14 1611” 14 1712” 15 1914” 17 2215” 18 2316” 18 25
.400” Diamond Depth
BV RED LIST PRICE
BV2000 $251BV2250 $269BV2500 $281BV2750 $321BV3000 $360BV3250 $392BV3500 $401BV4000 $444BV4250 $528BV4500 $576BV4750 $591BV5000 $628BV5500 $685BV5750 $739BV6000 $758BV6250 $815BV7000 $1,022BV8000 $1,055BV9000 $1,282BV10000 $1,329BV11000 $1,394BV12000 $1,485BV14000 $1,831BV15000 $1,943BV16000 $2,028
BVU GREEN LIST PRICE
BV2000-U $264BV2250-U $282BV2500-U $295BV2750-U $337BV3000-U $378BV3250-U $411BV3500-U $421BV4000-U $466BV4250-U $554BV4500-U $605BV4750-U $620BV5000-U $659BV5500-U $700BV5750-U $775BV6000-U $796BV6250-U $855BV7000-U $1,073BV8000-U $1,108BV9000-U $1,346BV10000-U $1,395BV11000-U $1,464BV12000-U $1,560BV14000-U $1,923BV15000-U $2,040BV16000-U $2,130
FAST CORING FASTER CORING
26
800.654.7224 phone • 800.256.3304 fax
CBSP - WET SMALL DIAMETER CROWN CORE BITS
DRY MASONRY BITS
Cor
e B
its
Size Part # List Price3/4" x 5/8” - 11 Thread CBSP750 $1437/8" x 5/8” - 11 Thread CBSP875 $1481" x 5/8” - 11 Thread CBSP1000 $1501-1/8" x 5/8” - 11 Thread CBSP1125 $1661-1/4" x 5/8” - 11 Thread CBSP1250 $1951-3/8" x 5/8” - 11 Thread CBSP1375 $1971-1/2" x 5/8” - 11 Thread CBSP1500 $2011-5/8" x 1-1/4” - 7 Thread CBSP1625 $2351-3/4" x 1-1/4” - 7 Thread CBSP1750 $2411-7/8" x 1-1/4” - 7 Thread CBSP1875 $248
Size Part Number
List Price
Part Number
List Price
1” BD1 $177 - -
1-1/4” BD11/4 $188 - -
1-1/2” BD11/2 $200 BDX11/2 $219
1-3/4” BD13/4 $211 BDX13/4 $232
2” BD2 $234 BDX2 $258
2-1/4” BD21/4 $239 BDX21/4 $263
2-1/2” BD21/2 $245 BDX21/2 $269
3” BD3 $302 BDX3 $332
3-1/2” BD31/2 $359 BDX31/2 $395
4” BD4 $376 BDX4 $413
4-1/2” BD41/2 $433 BDX41/2 $476
5” BD5 $475 BDX5 $523
6” BD6 $558 BDX6 $614
BDXBDDry Masonry Bits are designed for use on hand held core drill rigs and some hand drills. Use these bits for coring through BRICK and BLOCK walls only. Commonly used for conduit and other piping.
The BDX series bits use the ARIX™ Diamond Arrangement Technology to provide higher productivity and lower costs per hole.
5/8” - 11 Threaded9 inch drilling depth
CBSP 3/4” to 1-1/2” bits have 5/8”-11 threads. To run these bits on core drill rigs with 1-1/4” - 7 threads you need to purchase the adaptor p# AD11/4 on page 27.
27
www.dixiediamond.com
Part Number Core Bit Adapters & Extensions List Price
EXT611/4 6" Long Extension 1-1/4” - 7 Female to 1-1/4”-7 Male $66
ADJAC Jacob's Chuck Adapters 5/8” - 11 Male to 1/2” Shank $45
AD5/8 Adapter 5/8” - 11 Female to 1-1/4” - 7 Male $66
EXT125/8 12” Extension 5/8” - 11 Female to 5/8” - 11 Male $60
AD11/4 Adapter 1-1/4” - 7 Female to 5/8” - 11 Male $55
EXT65/8 6” Extension 5/8” - 11 Female to 5/8” - 11 Male $54
EXT1211/4 12” Extension 1-1/4” - 7 Female to 1-1/4” - 7 Male $77
Hilti™ Quick Disconnect Core Bits and Rigs
AD5/8BI Hilti™ Quick Disconnect Male (3 slot) to 5/8” - 11 Male with BI Connection $60
AD5/8BI+ Hilti™ Quick Disconnect Male (6 slot) to 5/8” - 11 Male with BI+ Connection $60
AD5/8BU Hilti™ Quick Disconnect Male (Spline) to 5/8” - 11 Male with BU Connection $360
AD11/4BI Hilti™ Quick Disconnect Male (3 slot) to 1-1/4” - 7 Male with BI Connection $70
AD11/4BI+ Hilti™ Quick Disconnect Male (6 slot) to 1-1/4” - 7 Male with BI+ Connection $70
AD11/4BU Hilti™ Quick Disconnect Male (Spline) to 1-1/4” - 7 Male with BU Connection $360
AD11/4FS Hilti™ Quick Disconnect Male 1-1/4” – 7 to Female Spline $360
SLIDER Hilti™ Quick Change Adaptor Fits Between Motor & Bit (stays on motor) $77
Fits between bit and motor. On first use SLIDER becomes attached to motor so it cannot be lost. Easily removed with a light hammer tap.
Cams expand during use, making the bit tight to the motor for no slippage. Once power is turned off, cam contracts releasing bit for easy removal
Red Price indicates stock items
Core B
it Ad
ap
tersa
nd
Exten
sions
28
800.654.7224 phone • 800.256.3304 fax
Electronic Cardi Single SpeedHand Held Core Drill
Electronic Cardi 2 SpeedHand Held Core Drill
Electronic Cardi 3 SpeedHand Held Core Drill
(Part# CARDITO-EL)
(Part# CARDITOL-EL)
(Part# CARDIT1M-EL)
Call for Pricing
Call for Pricing
Call for Pricing
• 1 Speed hand-held core drill• Electronic Clutch• 120 V, 50/60 Hz, 15 amp• 1-1/4” male shaft with 5/8”
adapter
• Wet and dry drilling• 5” core bit capacity• Case included• Idle RPM: 940• Load RPM: 740
• 2 Speed hand-held core drill• Electronic Clutch• 120 V, 50/60 Hz, 15 amp• 1-1/4” male shaft with 5/8”
adapter
• Wet and dry drilling• 5” core bit capacity• Case included• Idle RPM: 1180/2150• Load RPM: 930/1700
• 3 Speed hand-held core drill• Electronic Clutch• 120 V, 50/60 Hz, 15 amp• 1-1/4” male shaft with 5/8”
adapter
• Wet and dry drilling• 5” core bit capacity• Case included• Idle RPM: 770/1860/2580• Load RPM: 570/1380/1920
Ha
nd
Hel
d C
ore
Dri
llin
g
29
www.dixiediamond.com
Electric CARDI 16”Hand Saw
Call for Pricing Call for Pricing
Call for Pricing
Core D
rilling
& H
an
d Sa
w
(Part # CARDITP400-EL)
Part # CARDI-L160• Anchor Base• Aluminium Alloy• 2” x 2” x 34” Column• 24” Bit Travel• Weight: 20 lbs.• 6” Max Drilling Diameter
Part # CARDI-L180• Anchor Base• Aluminium Alloy• 45° Tilting Angle• 2” x 2” x 34” Column• 22” Bit Travel• Weight: 24 lbs.• 8” Max Drilling Diameter
(With Spacer)
Cardi Hand HeldDrill Stand
Cardi Hand HeldDrill Stand
CARDI TP400-ELFeatures• 6” Max depth of cut• Great for Concrete, Masonry, Block, and Stone• Powerful 20 Amp, 120 V Motor• Soft-Start allows use on 20 Amp Circuit• Saw Weighs only 29 lbs• No Exhaust Gases or Gasoline Fumes• Wheel Kit allows use as a floor saw• GFCI built into the cord for Safety• Great for Indoor Applications, Small Contractors
and DIY Warriors• Wet Cutting with water hook up and flow through shaft• Dry Cutting is only recommended with dust extraction
Blade Part # H45DB32816125 - List Price $500Flush Cut Adaptor Kit - Part #TP400FC - List Price $285Converts Saw to Flush Cut
Call for Pricing
30
800.654.7224 phone • 800.256.3304 fax
DMX20VE With Vacuum
Drill Motor• Milwaukee 20 AMP• 110 Volt• Slip clutch• 450 / 900 RPM• Handy Carriage• Handle• Bubble Level
Features• Gast vacuum pump• Ceiling jack• Dual switch control panel• Amp meter• Leveling screws• Vacuum and anchor combo base• Slide handle• 1 year warranty on parts and labor
General Specifications• Bit Capacity: 1/2” to 12” (14”
w/spacer)• Bit Feed: 27”• Motor Spindle: 1-1/4” - 7• Column: 3-1/2” x 3-1/2”
adjustable rack and pinion• Size LxWxH: 20” x 14” x 36”• Weight: 159 lbs.
Cor
e D
rill
ing
List Price: $3400plus shipping
PART#: DMX20VE
31
www.dixiediamond.com
Emergency Shut-Off
13 HPHonda Engine
18” Two PieceAluminum Guard
FREE HP1018” x .125” Blade
Cyclone™
Air Filter & Oil Alert
8” Non-slipRubber Wheels
Features• 13 Horsepower Honda Saw with 18” Guard• Heavy Duty, 7-Gauge Steel Frame• Heavy Duty Anti-Vibration Engine Mounts• Left or Right side Cutting• 3-Belt Drive for more Shaft Power• Heavy Duty Hinged Blade Guard• Premium non-slip rubber wheels• Weight - 254 lbs.
DDM13-18E - Walk Behind Saw
Wa
lk Beh
ind
Saw
List Price: $2600plus shipping
PART#: DDM13-18E
Includes FREE HP1018” x .125”
Concrete Blade
32
800.654.7224 phone • 800.256.3304 fax
Makita Hand Saw
Features & Benefits• Five stage filtration system with advanced
directional air flow for better saw performance• Carburetor engineered with improved deco-valve
and metering spring for precise fuel regulation at start up.
• Improved ignition system with large flywheel and rare earth magnets create more efficient power.
• Reinforced aluminum blade guard with 70 degrees range of limitless positioning using a marked knob handle
• Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
• On-Off-Choke operation switch on a single lever for operator convenience
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
• Microchip controlled carburetor designed to compensate engine timing according to work load
• Starter grip decompression valve for faster starting
• Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Standard Equipment• Universal wrench (965-210-222)• Torx key (940-827-000)• Screwdriver (944-827-001)• Adapter ring (20mm to 1) (394-2280121)
Specifications• Engine Displacement: 4.5 cu.in./73 cc.• Max Power: 5.1 HP / 3.8kW• No Load Speed: 9,350 RPM• Fuel Mixture: 50:1• Tank Capacity: 37 oz.• Blades Max RPM: 4,300 RPM• Blade Diameter: 14”• Arbor: 20mm or 13/16”• Max Cutting Depth: 4-13/16”• Net Weight: 22.0 lbs• Shipping Weight: 28.0 lbs
Ma
kit
a H
an
d S
aw
List Price: $1200plus shipping
14” 73cc. Power CutterPART#: DDMEK7301
Part Number Description Net PriceBUSHING20 1” OD X 20mm ID X 9.5mm THICK $1.30BUSHING20THIN 1” OD X 20mm ID X 2.5mm THICK $1.30
33
www.dixiediamond.com
Maximum Blade Cutting Depth
Blade Diameter Cutting Depth
Concrete Saw Blades12” 3-3/4”14” 4-3/4”16” 5-3/4”18” 6-3/4”20” 7-3/4”24” 9-3/4”26” 10 3/4”30” 12”36” 15”42” 18”48” 20”
High-Speed Saw Blades12” 4”14” 5”16” 6”
Wall Saw Blades18” 6-1/2”24” 9-1/2”30” 11-1/2”36” 14-1/2”42” 17-3/4”48” 20-3/4”
Masonry Saw Blades14” 5”18” 7”20” 8”
Tile Saw Blades6” 1-3/4”7” 2-1/4”8” 2-3/4”9” 3-1/4”10” 3-3/4”
Hand Saw Blades4” 1”
4-1/2” 1-1/4”5” 1-1/2”7” 2-1/2”8” 3”
Note: Diamond blade cutting depths listed above are approximate. Actual cutting depth will vary with the exact
blade diameter or saw type, or diameter of the blade collars (flanges).
Blade Operating Speeds
DiameterRecommended
OperatingSpeed (RPM)
MaximumSafe
OperatingSpeed (RPM)
4” 9,072 15,0004-1/2” 8,063 13,300
5” 7,257 12,0006” 6,048 10,1857” 5,184 8,7308” 4,536 7,6409” 4,032 6,79010” 3,629 6,11512” 3,024 5,095
12” HS (High-Speed) – 6,30014” 2,592 4,365
14” HS (High-Speed) – 5,40016” 2,268 3,820
16” HS (High-Speed) – 4,80018” 2,016 3,39520” 1,814 3,05524” 1,512 2,55026” 1,396 2,35028” 1,296 2,18530” 1,210 2,04032” 1,134 1,91036” 1,008 1,70042” 864 1,45548” 756 1,275
Core Bit Operating Speeds
Diameter Minimum(RPM)
IDEAL(RPM)
Maximum(RPM)
1” 2400 3200 40002” 1200 1600 20003” 800 1050 13004” 600 800 10005” 475 640 8006” 400 530 6657” 340 450 6008” 300 400 50010” 240 320 40012” 200 265 33014” 170 225 28516” 150 200 25018” 130 175 22020” 120 160 20024” 100 130 16526” 90 125 15030” 80 105 13032” 75 100 12534” 70 95 12036” 65 85 11040” 60 80 10042” 55 75 95
Technical Information
34
800.654.7224 phone • 800.256.3304 fax
Note: Slow cutting and short blade life are common problems with diamond blades. It is very important to understand that the segment of the blade is designed to wear at a certain rate. That is one of the important factors that makes one blade different from another.
Slow Cutting SpeedCause Usually occurs when a blade is used to cut a
material that is too hard for the segment. The hard material wears the exposed diamonds, but not the metal portion of the segment. The segment wears too slowly, no new diamonds are exposed, and you see slow cutting speed.
Solution Cut a soft, abrasive material until diamonds are well exposed. Try Asphalt, block, sandstone, or dried mortar. Choose the proper blade for the application.
Potential If this problem is allowed to continue, heat builds up and the blade begins to bounce leading to segment loss, core cracks and a very unsafe condition.
Short Blade LifeCause Usually occurs when a blade is used to cut a
material that is too soft and abrasive for the segment. The abrasive material wears the metal of the segment too fast, and you see short blade life.
Solution Specify the correct blade, choose a more wear resistant bond. Check water flow. Make sure blade is rated for the equipment used. Check saw is in good condition.
Potential If blade specification is not changed the problem will reoccur. Customer will not get the full life and efficiency of the diamond tool.
Core or Segment CracksCause Blade is too hard for material. Saw is in need of repair. Blade
mounted improperly. Overheating. Twisting while cutting or attempting to cut curves.
Solution Specify a softer bonded blade for the material. Check all bearings, belts, shaft and flanges. Check direction of blade travel. Follow guidelines for proper blade operation and cooling procedures.
Potential If this problem is allowed to continue it will result in segment loss and possible core destruction. This is an extremely dangerous situation. Do not continue to use the blade.
Wobbling/Warped BladeCause Blade is out of tension...the steel core is not straight. Wrong
size collars or mounted incorrectly. Blade allowed to overheat (bluish black marks). Blade run at at improper RPM.
Solution Return blade to factory for repair. Use the correct sized blade collars. Check flanges are smooth and tightfitting. Follow guidelines for proper blade operation and cooling procedures. Check RPM rating for blade and saw.
Potential If this problem is allowed to continue, heat builds up and the blade begins to bounce leading to segment loss, core cracks and a very unsafe condition. Produces poor quality cuts.
UndercuttingCause Steel core is worn faster than segments by abrasive
material being cut.Solution Specify a blade with wear-retardant design. Increase
water flow to flush cut.Potential If this problem is allowed to continue, the core will wear
out from under the segment and allow the segments to separate.
Diamond Tool Troubleshooting
35
www.dixiediamond.com
Terms of Sale
Warranty
Ordering Information
• ALL DIAMOND TOOLS ARE WARRANTED AGAINST MANUFACTURING DEFECTS FOR THE LIFE OF THE PRODUCT. Applicability of warranty will be determined ONLY after inspection by a qualified DDM representative. DDM may pro-rate any warranty claim based upon a fair percentage of tool life prior to failure. Any tool covered under warranty will be replaced or repaired at the discretion of DDM. Warranty items include labor, parts, and return service shipping via UPS Ground or best-way.
• RETURNED GOODS AUTHORIZATION (RGA) must be issued by a DDM customer service representative and must accompany all items returned to the factory. Please have the following information before you call for an RGA: type and size of tool, part number, serial number, equipment used, and material being cut.
• RESTOCKING FEES may apply to the return of any non-catalog item.
• PLACE ORDERS with your local distributor, a DDM sales representative, customer service representative, by phone, fax, or e-mail. If you need help selecting tools, DDM will be glad to help you specify the tools you need. You do not need specific item numbers when placing orders.
• DISTRIBUTION POLICY: Orders will be processed for customers with accounts in our system. DDM sales policy is to guide consumers to approved distributors whenever possible.
• ITEM NUMBERS identify the specific tool you are ordering. DDM item numbers are used during order entry, and appear on picking tickets, packing slips, and invoices. Examples of item numbers appear at the bottom of each page or are found with the prices of some product groups.
Dry Cutting Blades – Example – DSLP1814125 Wet Cutting Blades – Example – AS9018140
DSL P 18 14 125 A S 90 18 140
DrySegmentedLaser-welded
Grade GradeMaterialBond BondDiameter DiameterThickness Thickness
DSLP1814125 AS9018140Dry CuttingSegmentedLaser-weldedPremium Grade
18 bond14” diameter.125” thickness
AsphaltSupreme grade
90 bond18” diameter.140”
Ordering, Termsand Warranty
• FREIGHT on blades is prepaid for UPS Ground Service on any diamond blade shipment that is $400 or greater. Freight on equipment is not prepaid. Shipping and handling charges will be prepaid and charged to the customer on the invoice. All Air Shipments will be billed to the customer on the invoice.
• MINIMUM ORDER - None• TAXES apply to all product sales unless a tax exempt certificate is provided.• PRICES in this catalog are list prices and are subject to change without notice. All prices are in US Dollars.
205 Buxton Court • Lilburn, GA 30047
Phone: 770-921-2464 • Fax: 770-921-4370 Toll Free: 800-654-7224 • Toll Free Fax: 800-256-3304
www.dixiediamond.com
DDM has been making quality diamond tools from start to finish in Atlanta, GA since 1969.We are the largest American Owned diamond tool maker in the U.S.A.