Division of KC Sales & Service Inc. · Division of KC Sales & Service Inc. ... Selca S3045PD control with BOBCAD CAM software . Manual Turret Lathes Assorted small tooling, ...

Division of KC Sales & Service Inc.

www.shopkcsalesproducts.com

Main Office Phone; 231-937-7886

Shop phone: 231-648-6454

Fax # 231-937-6742

Contact: Chuck Harrington @ 616-304-7932

e-mail contacts; [email protected]; [email protected]; [email protected]; &

[email protected]

Building located at: 707 S Ensley

Howard City, MI 49329

Mailing address is 388 Willow St.

Shop Capabilities Document;

CNC Machining Center #1.

X axes 63 inch travel

Y Axes 35 inch travel

Z Axes 24 Inched travel

6000 LB table load

6000 RPM Spindle using CAT 50 holders 40 position tool changer hand loads to 89 tools

Laser calibrated to within 0.015mm per 60 inches

Selca S3045PD control with BOBCAD CAM software

CNC Machining Center #2.

X axes 40 inch travel

Y Axes 24 inch travel

Z Axes 20 Inched travel

3000 LB table load

10000 RPM Spindle using CAT 40 holders 20 position tool changer, hand loads to 89

Laser calibrated to within 0.015mm per 40 inches

Selca S3045PD control with BOBCAD CAM software

CNC Machining Center #3.

X axes 27 inch travel

Y Axes 17 inch travel

Z Axes 17 Inched travel

1000 LB table load

12000 RPM Spindle using CAT 40 holders 16 position tool changer, hand loads to 89

tools

Laser calibrated to within 0.005mm per 27 inches

Selca S3045PD control with BOBCAD CAM software

Manual Turret Lathes

Assorted small tooling, welders, surface grinders, small engine lathe, and large assembly

area.

Lots of extra storage and floor space. Facility has 6100 square foot of floor space.

Front shop overview. 3600 square foot building in back is currently used as storage.