132 Discrete valve Sub base porting 4GB1/2/3 Series • Applicable cylinder bore size: 20 to 100 mm Common specifications Descriptions Working fluid Valve and solenoid type Min. working pressure Max. working pressure Withstanding pressure Ambient temperature Fluid temperature Manual override Pilot exhaust method Lubrication Protection structure Vibration/impact Working environment Compressed air Pilot operated soft spool valve 0.2 (2-position, 3-position) 0.7 1.05 -5 to 55 -5 to 55 Non-locking/lock common type Main valve/pilot valve common exhaust type Main valve/pilot valve individual exhaust type Not required Dust proof 50 or less/300 or less Not to be subject to corrosive gas MPa MPa MPa °C °C Internal pilot External pilot Note 1 Note 2 m/s 2 Note 3. For indicator light, refer to the value in ( ). Electrical specifications Descriptions Rated voltage V Rated voltage fluctuation range Holding current A Note 3 Power consumption Note 3 W Apparent power VA Heat proof class Temperature rise °C Surge suppressor Indicator 12, 24 100 ±10% 0.023 (0.025) 0.046 (0.050) 0.010 (0.012) 0.55(0.6) 0.55(0.6) 1.0 (1.2) B 50 Option (Option) indicator light DC AC DC24V DC12V AC100V DC24V DC12V AC100V Note 1. For lubrication, please use turbine oil Class 1 ISOVG32. Too much lubrication, intermittent lubrication may cause unstable operation. Note 2. Not to be subject to water drip, oil etc. For DIN terminal box specifications, IP65 (jet-proof type). However, applicable code outer diameter and specified tightening torque should be observed. <Reference> Pressure unit is MPa. Conversion ratio is 1MPa=10.1972kgf/cm 2 . Individual specifications Descriptions 4GB1 Port size Rc1/8 Rc1/8 4GB2 Rc1/4 Rc1/4 4GB3 Rc1/4, Rc3/8 Rc1/4, Rc3/8 Port A/B Port P/R1/R2 Descriptions 4GB1 Response time ms 4GB2 4GB3 2-position 3-position Descriptions 4GB1 Effective sectional area mm 2 Value of light, surge suppressor is shown. Response time is the value at supply pressure 0.5MPa, 20 °C, not lubricated. The value varies depending on pressure and oil quality. 4GB2 4GB3 2-position 3-position All ports closed ABR connection PAB connection Single Double ABR connection A/B → R1/R2 P → A/B When OFF When ON When OFF When ON When OFF When ON A/B → R1/R2 P → A/B A/B → R1/R2 P → A/B 6.0 6.0 6.0 7.0 6.0 6.0 6.5 6.0 13 11 11 15 13 11 13 11 23 19 19 24 22 19 22 19 12 9 8 12 - 15 19 18 17 19 - 30 25 24 23 28 - 45 Descriptions Mass g 4GB1 4GB2 4GB3 For no piping adapter, refer to the value in ( ). Value of E-connector is including socket assembly (lead wire 300mm). For mass of EJ connector, add 16g/piece to E-connector. Single Double All ports blocked Grommet lead wire E-connector DIN terminal box Grommet lead wire E-connector DIN terminal box Grommet lead wire E-connector DIN terminal box 79 (37) 81 (39) - 94 (52) 98 (56) - 95 (53) 99 (57) - 154 (72) 156 (74) 176 (94) 169 (87) 173 (91) 213 (131) 180 (98) 184 (102) 224 (141) 214 (95) 216 (97) 236 (117) 230 (111) 234 (115) 274 (155) 239 (120) 243 (124) 283 (164) 2-position 3-position CAD DATA AVAILABLE.
23
Embed
Discrete valve Sub base porting 4GB1/2/3 Series · 2011. 4. 19. · Sub base porting 4GB1/2/3 Series • Applicable cylinder bore size: 20 to 100 mm Common specifications Descriptions
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
132
Discrete valveSub base porting
4GB1/2/3 Series• Applicable cylinder bore size: 20 to 100 mm
Common specificationsDescriptionsWorking fluid
Valve and solenoid type
Min. working pressure
Max. working pressure
Withstanding pressure
Ambient temperature
Fluid temperature
Manual override
Pilot exhaust
method
Lubrication
Protection structure
Vibration/impact
Working environment
Compressed air
Pilot operated soft spool valve
0.2 (2-position, 3-position)
0.7
1.05
-5 to 55
-5 to 55
Non-locking/lock common type
Main valve/pilot valve common exhaust type
Main valve/pilot valve individual exhaust type
Not required
Dust proof
50 or less/300 or less
Not to be subject to corrosive gas
MPa
MPa
MPa
°C°C
Internal pilot
External pilot
Note 1
Note 2
m/s2
Note 3. For indicator light, refer to the value in ( ).
Electrical specificationsDescriptionsRated voltage
V
Rated voltage fluctuation range
Holding current
A
Note 3
Power consumption
Note 3 W
Apparent power VA
Heat proof class
Temperature rise °CSurge suppressor
Indicator
12, 24
100
±10%
0.023 (0.025)
0.046 (0.050)
0.010 (0.012)
0.55(0.6)
0.55(0.6)
1.0 (1.2)
B
50
Option
(Option) indicator light
DC
AC
DC24V
DC12V
AC100V
DC24V
DC12V
AC100V
Note 1. For lubrication, please use turbine oil Class 1 ISOVG32.Too much lubrication, intermittent lubrication may cause unstable operation.
Note 2. Not to be subject to water drip, oil etc.For DIN terminal box specifications, IP65 (jet-proof type).However, applicable code outer diameter and specified tightening torque should be observed.
<Reference> Pressure unit is MPa. Conversion ratio is 1MPa=10.1972kgf/cm2.
Individual specificationsDescriptions 4GB1
Port size Rc1/8
Rc1/8
4GB2
Rc1/4
Rc1/4
4GB3
Rc1/4, Rc3/8
Rc1/4, Rc3/8
Port A/B
Port P/R1/R2
Descriptions 4GB1
Response time
ms
4GB2 4GB3
2-position
3-position
Descriptions4GB1
Effective sectional
area mm2
Value of light, surge suppressor is shown. Response time is the value at supply pressure 0.5MPa, 20 °C, not lubricated. The value varies depending on pressure and oil quality.
4GB2 4GB3
2-position
3-position
All ports closed
ABR connection
PAB connection
Single
Double
ABR connection
A/B → R1/R2P → A/B
When OFFWhen ON When OFFWhen ON When OFFWhen ON
A/B → R1/R2P → A/B A/B → R1/R2P → A/B
6.0
6.0
6.0
7.0
6.0
6.0
6.5
6.0
13
11
11
15
13
11
13
11
23
19
19
24
22
19
22
19
12
9
8
12
-
15
19
18
17
19
-
30
25
24
23
28
-
45
DescriptionsMass g
4GB1 4GB2 4GB3
For no piping adapter, refer to the value in ( ). Value of E-connector is including socket assembly (lead wire 300mm).For mass of EJ connector, add 16g/piece to E-connector.
Single
Double
All ports
blocked
Grommet lead wire
E-connector
DIN terminal box
Grommet lead wire
E-connector
DIN terminal box
Grommet lead wire
E-connector
DIN terminal box
79 (37)
81 (39)
-
94 (52)
98 (56)
-
95 (53)
99 (57)
-
154 (72)
156 (74)
176 (94)
169 (87)
173 (91)
213 (131)
180 (98)
184 (102)
224 (141)
214 (95)
216 (97)
236 (117)
230 (111)
234 (115)
274 (155)
239 (120)
243 (124)
283 (164)
2-po
sitio
n3-
posi
tion
CAD DATA AVAILABLE.
133
4SA/B0
4SA/B1
4GA/B
MN4GA/B
4TB
4KA/B
4F
3MA/B0
3PA/B
P/M/B
4F**0E
SKH
4L2-4/LMF0
PV5/CMF
4GA/B (master)
MN3S0/MN4S0
Uniwiresystem
NP/NAP/NVP
HMV/HSV
PCD/FS/FD
3, 5 po
rt pilo
t op
erated valve
Discrete
4GB1/2/3 SeriesDiscrete valve: Sub base porting
Model
E Voltage
C Electric connection
B Port size
A Solenoid position
How to order
1 4GB1 06 E2 0
Note 1. AC100V is not available for grommet lead wire specifications.Note 2. Check valve specifications are not available for 3-position
all ports closed and PAB connection.
Caution for model election
Please refer to Page 93 about surge suppressor/indicator light circuit diagram.
D Options
12345
2-position single2-position double3-position all ports closed3-position ABR connection3-position PAB connection
DescriptionsSymbol
Model
4GB
1
4GB
2
4GB
3
Port
060810
Port A/B
Rc1/8Rc1/4Rc3/8
BlankB
E-connector (radial/axial)E0E00E01E02E03E2E20E21E22E23E0NE2NE3E1EJ-connector (socket with cover, radial/axial)E01JE02JE03JE21JE22JE23J