Quality, Design … …and Technology HT-System (PPs) Discharge Pipes and Fittings Sound Insulation 26 dB
Quality, Design …
…and Technology
HT-System (PPs)Discharge Pipes and Fittings
Sound Insulation 26 dB
EN
HT-
Sys
tem
PP
s A
uflg.
01 S
tand
201
2_12
| w
ww
.enn
ekin
gdes
ign.
de
Products from
Gebr. Ostendorf Kunststoffe GmbH & Co. KGRudolf-Diesel-Straße 6-8 | 49377 Vechta | GermanyPhone: +49(0)4441-874-0 | Fax: +49(0)4441-874-15
[email protected] | www.ostendorf-kunststoffe.com
Logo: Ostendorf KunststoffeStand: 14-11-2008Schriftfamilie:Century Gothic RegularCentury Gothic BoldFarbmodus: 4-farbig Euroskala (CMYK)schwarz: 100% Korange: 0/70/99/0
ISO 9001
HT-System (PPs) Discharge Pipes and Fittings Discharge Pipes and Fittings HT-System (PPs)
Quality- technical terms of delivery according to DIN EN 1451 resp. DIN 19560-10
- general quality requirements according to DIN 8078
- use of quality raw materials of reputed producers
- pipes and fi ttings are leakage tested
- internal quality control by QM and external monitoring by MPA Darmstadt
- permanent quality control according to DIN EN ISO 9001 DQS
Design - All pipes bear a permanent marking in black with
name of the manufacturer, nominal diameter, production date and time and EAN code
- centimeter marking (see picture) on all pipes
- new abrasion resistant marking with EAN Code
Technology- chemical resistance (ph 2-ph 12)
- temperature resistance 90°C (constant temperature)
- fl ame-resistant DIN 4102 / B 1, easy and safe fi re prevention
- approval for central vacuum cleaning systems DN 32- DN 160
- new modifi ed composition
- radon tightness
- fi re protection sleeve for diagonal ducts and sealing over sleeves
- sound insulation test according to DIN EN 14366 tested by the Fraunhofer Institute for Building Physics, Stuttgart Result: 26 dB Sound Insulation Class II installation with standard pipe clamps
26 dBSound Insulation
Class IIHT-System (PPs)Discharge Pipes and Fittings
Sound Insulation 26 dB
ISO 9001
HT-System (PPs) Discharge Pipes and Fittings Discharge Pipes and Fittings HT-System (PPs)
Quality- technical terms of delivery according to DIN EN 1451 resp. DIN 19560-10
- general quality requirements according to DIN 8078
- use of quality raw materials of reputed producers
- pipes and fi ttings are leakage tested
- internal quality control by QM and external monitoring by MPA Darmstadt
- permanent quality control according to DIN EN ISO 9001 DQS
Design - All pipes bear a permanent marking in black with
name of the manufacturer, nominal diameter, production date and time and EAN code
- centimeter marking (see picture) on all pipes
- new abrasion resistant marking with EAN Code
Technology- chemical resistance (ph 2-ph 12)
- temperature resistance 90°C (constant temperature)
- fl ame-resistant DIN 4102 / B 1, easy and safe fi re prevention
- approval for central vacuum cleaning systems DN 32- DN 160
- new modifi ed composition
- radon tightness
- fi re protection sleeve for diagonal ducts and sealing over sleeves
- sound insulation test according to DIN EN 14366 tested by the Fraunhofer Institute for Building Physics, Stuttgart Result: 26 dB Sound Insulation Class II installation with standard pipe clamps
26 dBSound Insulation
Class IIHT-System (PPs)Discharge Pipes and Fittings
Sound Insulation 26 dB
Quality, Design …
…and Technology
HT-System (PPs)Discharge Pipes and Fittings
Sound Insulation 26 dB
EN
HT-
Sys
tem
PP
s A
uflg.
01 S
tand
201
3_0
6 |
ww
w.e
nnek
ingd
esig
n.d
e
Products from
Gebr. Ostendorf Kunststoffe GmbHRudolf-Diesel-Straße 6-8 | 49377 Vechta | GermanyPhone: +49(0)4441-874-0 | Fax: +49(0)4441-874-15
[email protected] | www.ostendorf-kunststoffe.com
Logo: Ostendorf KunststoffeStand: 14-11-2008Schriftfamilie:Century Gothic RegularCentury Gothic BoldFarbmodus: 4-farbig Euroskala (CMYK)schwarz: 100% Korange: 0/70/99/0