Page 1
Tender Document Issued To:
Name of the Tenderer : ______________________________________________________
Address : ______________________________________________________
______________________________________________________
______________________________________________________
Signature of the Official Issuing the Tender Document with Desingation and Date
Construction of Govt. Polytechnic Colleges at Kampli in Bellary District,
Kartagi in Koppal District and at Surpur in Yadgir District for DTE
Open Tender Notice No. RITES/BLR/OT/03/2015 dated 16.02.2015
FINANCIAL BID
DIRECTOR
DEPARTMENT OF TECHNICAL EDUCATION
BANGALORE
TENDER
RITES Ltd.,
(A Govt. of India Enterprise)
Site Office
3 A, Bharat Apartments, 44/1,
E.Mail : [email protected]
Fairfield Layout, Race Course Road
Bangalore - 560 001
Phone: 080 - 22257118 / 22280268
Fax: 080 - 22266557
Page 2
Schedule WORKS COST (`̀̀̀)
I Construction of Govt. Polytechnic College at Kampli in
Bellary District for DTE
II Construction of Govt. Polytechnic College at Kartagi
in Koppal District for DTE
III Construction of Govt. Polytechnic College at Surpur in
Yadgir District for DTE
TOTAL PROJECT COST
TOTAL IN WORDS
Construction of Govt. Polytechnic Colleges at Kampli in Bellary District, Kartagi in
Koppal District and at Surpur in Yadgir District for DTE
SUMMARY OF COST
RITES Ltd.,
For and on behalf of DTE 1 Signature of the Bidder
Page 3
SN DESCRIPTION AMOUNT
Civil Works
1 Part A - KPWD SR Items `
2 Part B - CPWD SR Items `
3 Part C - Market rate Items `
Electrical Works
1 Part A - KPWD SR Items `
2 Part B - Market Rate items `
TOTAL - Schedule I `
TOTAL
(in Words) - Rupees
Construction of Govt. Polytechnic College at Kampli in Bellary
District for DTE
Abstract - Schedule - I
RITES Ltd.,
For and on behalf of DTE 2 Sugnature of the Bidder
Page 4
Description Unit Qty
P. No l No
Part- A - KPWD SR Items
1 132 18.1 KSRRB 200-1: Cutting of trees girth from 300 mm to
600mm including cutting of trunks, branches and removal
of stump roots stacking of servicable materials earth filling
in the depressions/pit, labour charges complete as per
specifications. MORTH Specification clause 201/Chapter 2 Each 5.00 172.20 861.00
2 132 18.2 KSRRB 200-2: Cutting of trees girth from 600 mm to
900mm including cutting of trunks, branches and removal
of stump roots stacking of servicable materials earth filling
in the depressions/pit, labour charges complete as per
specifications. MORTH Specification clause 201/Chapter 2Each 5.00 522.90 2614.50
3 132 18.3 KSRRB 200-3: Cutting of trees girth from 900 mm to
1800mm including cutting of trunks, branches and removal
of stump roots stacking of servicable materials earth filling
in the depressions/pit, labour charges complete as per
specifications. MORTH Specification clause 201/Chapter 2 Each 5.00 1275.75 6378.75
4 132 18.10 KSRRB M200-7.1: Clearing grass and removal of rubbish
by manual means and stacking outside the periphery of the
area cleaned complete as per specifications. MORTH
Specification No. 201 Ha 0.40 14671.65 5868.66
5 7 2.24 Earth work for lowering and levelling the ground other than
foundation works by mechanical means up to 3.00 depth,
including providing shoring and strutting, removal of
stumps and other deleterious matter, dressing of sides and
bottom, filling back the excavation earth to the extent
required including the cost of labour & HOM of
machineries, as per drawing and technical specification. Cum 715.00 54.60 39039.00
6 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of
buildings, water supply, sanitary lines and electrical
conduits either in pits or in trenches 1.5m and above in
width in Hard soil not exceeding 1.5m in depth, including
dressing the bottom and sides of pits and trenches,
stacking the excavated soil clear from edges of excavation
with lead upto 50 m after breaking of clods complete as per
specifications. Specification No. KBS 2.1 (b)/2.3.5Cum 941.00 257.25 242072.25
7 5 2.6 KSRB 2-2.4: Excavation 1.5m and above in width in soft
rock without blasting for foundation of buildings, water
supply, sanitary lines and electrical conduits either in pits or
in trenches not exceeding 1.5m in depth, stacking the
excavated stuff from edges of excavation with lead upto
50m including cost of labour and HOM of euipment
complete as per specifications. Specification. No KBS
2.1.d / 2.9.4 / 2.18 / 2.19 Cum 202.00 796.95 160983.90
AmountRate
Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE
Sl No Bellary SR -
2014-15
RITES Ltd.,
For and on behalf of DTE 3 Sugnature of the Bidder
Page 5
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
8 5 2.8 KSRB 2.2.6: Excavation 1.5m and above in width in hard
rock by chiselling and/or wedging, where blasting is
prohibited for foundation of buildings, water supply, sanitary
lines and electrical conduits either in pits or in trenches
1.5m in depth stacking the excavated stuff clear from the
edge of excavation with lead upto 50m including cost of
labour complete as per specifications. Specification No.
KBS cum 202.00 1143.45 230976.90
9 6 2.10 KSRB 2.3 :Filling available excavated earth (excluding
rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited
layer by ramming after watering with lead upto 50 m. and
lift upto 1.5m. Including cost of all labour complete as per
speicifications. Specification No. KBS 2.9 Cum 1656.00 115.50 191268.00
10 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for
Pre-constructional Anti-Termite Treatment, creating
continuous chemical barrier under and around the column
pits,walls ,trenches,basement excavation,top surface of the
plinth filling, junction of wall and floor, along the external
perimeter of building, expansion joints, over the top surface
of consolidated earth on which apron is to be laid,
surrounding of pipes and conduits, with chloropyriphos
emulsifiable concentrates of 20%concentration, including
cost of chemical, diluting in water to one percent
concentration, labour, HOM of equipments, complete as
per specifications.(Plinth area of the building at ground
floor only shall be measured ) Specification No. KBS 3.2.6
/ 3.2.7 Sqm 1320.00 105.00 138600.00
11 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement
concrete of mix 1:4:8 with OPC cement @ 180kgs, with
40mm and down size graded granite metal coarse
aggregates @ 0.85cum and fine aggregates @ 0.57cum
machine mixed, concrete laid in layers not exceeding
15cms, thick, well compacted, in foundation including cost
of all materials, labour, HOM of machinery, curing
complete as per specifications. specification No KBS
4.1,4.2 Cum 195.00 4250.40 828828.00
12 13 4.7 KSRB 4-1.7: Providing and laying in position plain cement
concrete of mix 1:3:6 with OPC cement @220 kgs with
20mm and down size graded granite metal coarse
aggregates @ 0.84 cum and fine aggregates @ 0.56 cum,
machine mixed, concrete laid in layers not exceeding 15
cms, thick, well compacted, in foundation, plinth and cills,
including cost of all materials, labour, HOM of machinery,
curing complete as per specifications. Specification No
KBS 4.1,4.2
Ground floor Cum 15.00 4753.35 71300.25
RITES Ltd.,
For and on behalf of DTE 4 Sugnature of the Bidder
Page 6
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
13 13 4.12 KSRB 4-2.7: Providing and laying in position reinforced
cement concrete of design mix M 25 with OPC cement @
340 kgs with 20mm and down size graded granite metal
coarse aggregates @ 0.70 cum and fine aggregates @
0.47 cum, with superplastisiser at 3.0 lts. conforming to
IS9103-1999 reaffirmed -2008, machine mixed, concrete
laid in layers not exceeding 15 cms, thick, vibrated for all
works in ground floor level for roof slabs, staircase, lintels,
retaining wals, return walls, walls(any thickness ) including
attached plasters, columns, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed
blocks, anchour blocks, plain windows cills, fillets etc.,
inclduing cost of all materials, labour, HOM of machinery,
curing complete as per specification s. Specification No
KBS 4.1,4.6 cum 757.00 5835.90 4417776.30
14 14 4.20 KSRB 4.2.11 : Providing and laying in position reinforced
cement concrete of design mix M20 with OPC cement @
27.20 kgs with 12 mm and down size graded granite metal
course aggregate @0.05865 cum and fine aggregates @
0.0391 cum, with superplastisiser @ 0.225 lts, machine
mixed, well compacted for plain Chajja of 8.5 cms. average
thickness upto ground floor level, including cost of all
materials, labour, HOM of machinery, finishing , curing,
complete as per specifications. Specification No. 4.1, 4.6 Sqm 68.00 464.10 31558.80
15 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete
including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2 Sqm 561.00 228.90 128412.90
16 15 4.18 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as roofs, landings, balconies and likes,
thickness up to 200mm including cost of all materials,
labour complete as per specifications upto 3.5m from
ground level, Specification No. KBS 4.6.2 Sqm 1236.00 305.55 377659.80
17 15 4.32 KSRB 4-6.5: Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars, post and struts,
square /rectangular / polygon in plan including cost of all
materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1168.00 354.90 414523.20
18 16 4.34 KSRB 4-6.7: Providing and removing centering, shuttering,
strutting, propping etc., an removal of form work for sides
and soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth including
cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1337.00 253.05 338327.85
19 16 4.37 KSRB 4-6.10: Providing and removing centering,
shuttering, strutting, propping etc., for chajjas, corbels etc.,
including edges including cost of all materials, labour
complete as per specification. Specification No.KBS 4.6.2 Sqm 81.00 262.50 21262.50
RITES Ltd.,
For and on behalf of DTE 5 Sugnature of the Bidder
Page 7
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
20 16 4.38 KSRB 4-6.11 :Providing and removing
centering,shuttering,strutting,propping etc., and removal of
form work for stairs (excluding landing) except spiral
staircase including cost of all materials, labour complete as
per specification. Specification NO. KBS 4.6.2 Sqm 56.00 476.70 26695.20
21 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for
R.C.C work including straightening, cutting, bending,
hooking, placing in position, lapping and / or welding
wherever required, tying with binding wire and anchoring to
the adjoining members wherever necessary complete as
per design (laps, hooks and wastage shall not be
measured and paid) cost of materials, labour, HOM of
machinery complete as per specifications. Specification
No. KBS 4.6.3
4.46.2 For TMT bars Fe 500 Tonne 72.00 73799.25 5313546.00
22 23 5.6 KSRB-5.2-3 : Providing and constructing Granite/ trap/
basalt size stone masonry in foundation with cement
mortar 1:6, stone hammered dressed in courses not less
than 20cms high, bond stones at two m. apart in each
course including cost of materials, labour, curing complete
as per specifications. KBS 5.1.13 Cum 221.00 3992.10 882254.10
23 23 5.9 KSRB 5.3-3: Providing and constructing granite/trap/
basalt Size stone masonry in basement with cement
mortar 1:6 ,edges of stones chistle dressed in courses not
less than 15cms high, bond stones at two m, apart in each
course including cost of materials, labour, curing complete
as per specifications, KBS 5.1.13 Cum 81.00 4912.95 397948.95
24 28 6.3 KSRB 6-1.3 : Providing and constructing burnt brick
masonry for basement and superstructure with approved
quality of non-modular bricks of standard size of class
designation 35 with cement mortar 1:6 including cost of
materials, labour charges, scaffolding, curing complete as
per specifications. Specification No. KBS 6.2 cum 484.00 5238.45 2535409.80
25 28 6.25 KSRB 6-7.4 : Construction of partition wall 11.2 cm thick
with non modular table moulded burnt brick of class
designation 35 with cement mortar 1:4 including cost of
materials labour charges, scaffolding, curing complete as
per specification KBS 6.2 Sqm 41.00 704.55 28886.55
26 31 7.1 KSRB 7.1: Providing and fixing in position collapsible
steel shutters with single or double leaf with vertical
channel 20x10x2mm braced with flat iron diagonals
20x5mm size with top and bottom rails of 'T' iron sections
of 40x40x6mm with 38mm dia steel pulleys complete with
bolt and nuts locking arrangements, stoppers, handles on
both sides with 7.5cms openings at 10cms c to c applying
a priming coat of red lead paint . Cost of mateials, labour,
HOM of machinery complete as per specifications. Size of
Gate 2.4m x 1.4m. Specification No.KBS 7.7/7.12. Sqm 15.00 4566.45 68496.75
RITES Ltd.,
For and on behalf of DTE 6 Sugnature of the Bidder
Page 8
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
27 39 7.24.1 c Providing and fixing cold rolled prepainted steel windows
of IS standards, made out of 0.6mm thick deep drawing
quality galvanised on both sides 120gms / sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and
finish painted with a polyester based paint 20 microns
thick. The size of profiles is approximately 46x52mm for
external frames, 46x46mm section for shutters, 46x70mm
section for centre mullion / transom and 18x31mm section
is for fixing glasses. The section should be cut to length
joint mitred and assembling by means of corner brackets
made out of cold rolled annealed strips of 1.2mm thick duly
galvanised and fixed with nickle plated self taping screws.
The shutters are provided with approved quality of fixtures
like handles made out of zamac alloy die cast and powder
coated, receiver made out of glass filled nylon and hinges
made out of CRCA powder coated. 4mm thick glass should
be fixed with EPDM gaskets. The above frames are fixed to
the concrete / masonary walls by means of self expanding
screws.- with 4mm float glass and with guard bars.Sqm 140.00 4200.00 588000.00
28 43 7.39 Providing and fixing 304 grade stainless steel hand rails of
14-gauge pipes for Ramps or staircase are made out of
stainless steel hollow pipes using 50mm dia for verticals @
1.60 mtr c/c are fixed to the ramps or steps by drilling with
bolts and 100mm dia MS base plates 10mm guage for
fixing of vertical pipes 4-Nos anchor bolts & 40mm dia
pipes are fixed horizontally for 2 rows top, one pipes are
fixed with vertical pipes another one are fixed with elbows
and 25mm dia pipes are fixed horizontally for 2 rows below
top measure @ equal intervals including cutting, welding,
bending wherever necessary with suitable caps @ tops,
bottoms & corners finishing with mat/shining etc., complete
including cost and conveyance of all materials, labour for
all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other
incidental charges etc., complete as per specification and
directions of Engineer-in-charge of the work. Ramps or
staircase for physically challengedsqm 10.00 6081.60 60816.00
29 47 8.19 Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E.
rain down water pipes 110mm outer dia approved make
and brand with necessary special like shoes, bends, and
offsets fixed with iron clamps, wall plugs, screws, including
cost of materials, labour, complete as per specifications.
m 200.00 603.75 120750.00
RITES Ltd.,
For and on behalf of DTE 7 Sugnature of the Bidder
Page 9
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
30 59 9.93 Providing and fixing factory made single leaft rigid GRP
Sandwich composite door shutter of 32mm thick, laminated
with two GRP skins with wood grain finish, fabricated using
U.V-stabilized Isopathic Gelcoat and on layer of 45 gsm E-
class Chopped strand Mat (CSM), impregnated with
orthopthalic polyster resin. The thickness of the skins shall
not be less than 1.5mm. Expanded Polystyrene (EPS)
structural foam panel of 29mm thickness and a density of
20Kg/m3 shall be used as core mterial. Wooden
reinforcements made of seasoned Salwood block of cross
section not less than 28mmX32mm and also necessary
salwood reinforcements for fixing the metal fittings such as
tower bolts, aldrops, handles etc shall be provided. A
structural adhesive compatible with EPS foam shall be
used for bonding the core material, the salwood
reinforcement and the skins.
The material and process for manufacturing the door
shutters shall confirm to RV/TIFAC composites Design
Centre standards and specifications and the door shutters
tested in confirmation to IS 4020-1994. The finish of shutter
will be plain colour White/Ivory/Beige/Light Grey or any
other colour using high quality pigments. Excluding cost of
fixtures and inclusive of supply of shutters to respective
work spot. Sqm 17.00 3360.00 57120.00
31 60 9.96 Providing and fixing 65mm X 125mm GRP Door frame
fabricated using E-Glass Chopped Strand Mat (CSM) U.V -
sablized Isopathlic Gelcoat and Isopthalic resin. The
thickness of the GRP Skin shall not be less than 2.0mm.
The door frame consists of four segments, which are
provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined
together by means of screws. The GRP frame shall be
provided with wooden reinforcement on 6 locations for high
screw holding capacity for fixing metalling hold fast and
shall be consolidated by filling with medium density
foam/plaster of paris with fibre reinforcement. Six numbers
of 260mmX25mmX5mm size S shaped M.S. flat hold fast
shall be provided with the frame. m 50.00 593.25 29662.50
32 85 12.116 Providing and fixing to wall, ceiling and floor unplaticised
PVC 6.00 kgs/sqcm working pressure with pipe fittings,
wall clips etc and making good the wall, ceiling and floor for
sanitary pipelines including cost of all materials, labour
charges, HOM of acquirements and testing complete as
per specifications.
12.116.1 -do-110mm dia m 100.00 427.35 42735.00
12.116.2 -do-140mm dia m 150.00 694.05 104107.50
RITES Ltd.,
For and on behalf of DTE 8 Sugnature of the Bidder
Page 10
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
33 68 11.37 KSRB 12-5.1: Construction brick masonry circular type
man hole 0.91m internal diameter at bottom 0.91m and
0.56mt dia at top with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 grade desination) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4Nos 2.00 12218.85 24437.70
34 69 11.38 KSRB 12-5.2: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 1.67m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 frade designation) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4 Nos 1.00 18924.15 18924.15
35 69 11.40 KSRB 12-5.4: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 2.29m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 frade designation) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4 Nos 1.00 28009.80 28009.80
RITES Ltd.,
For and on behalf of DTE 9 Sugnature of the Bidder
Page 11
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
36 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection
chamber 455x610mm, and 450mm depth. (clear inside
dimension) for single pipeline, using table moulded non-
modular bricks of class designation 50 in cement mortar
1:5, C.I cover with frame (light duty) 455x610mm internal
dimensions. total weight of cover with frame to be not less
than 38 kg (weight of cover 23kg and weight of frame 15
kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm
and downsize granite metal, foundation concrete 1:5:10
with 40mm and downsize granite metal inside plastering
12mm thick with cement mortar 1:3, finish smooth with a
floating coat of cement on walls and bed concrete
complete as per standard design including cost of
materials, labour charges, curing complete as per
specifications. Nos 2.00 6357.75 12715.50
37 71 11.52 KSRB 12-8.2: Construction brick masonry inspection
chamber 500x700mm and 450mm depth (clear inside
dimension) for pipeline with one or two inlets, using table
moulded non modular bricks of class designation 50 in
cement mortar 1:5 , CI cover with frame ( light duty)
455x610mm internal dimension, total weight of cover with
frame to be not less than 38Kg (weight of cover 23kg and
weight of frame 15kg) RCC top slab with cement concrete
1:2:4 mix 20mm and downsize granite metal, foundation
concrete 1:5:10 with 40mm and downsize granite metal
inside plastering 12mm thick with cement mortar 1:3
finished smooth with floating coat of cement on walls and
bed concrete complete as per standard design including
cost of materials, labour charges, curing complete as per
specifications. Each 1.00 7207.20 7207.20
38 74 12.1 KSRB 11.1 : Providing and fixing white vitreous chine clay
water closet Indian type (Sqatting pan) of size 580mm
with foot rests, 100mm S or P tarp, 10 litres low level, PVC
flushing cistren (all are approved make) with fittings, CI
/MS brackets, 32mm dia flush pipe fittings and clamps,
overflow arrangements with special and 25mm mosquito
proof coupling of approved design, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. KBS 11. Pan 4.00 3580.50 14322.00
39 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay
water closet European type (pedestrial type, P trap) with
black solid plastic sheet and lead cover, CP brass hinges,
rubber buffer 10 litres low level PVC flushing chintrens with
fittings CI / MS bracket 50 mm dia meter flush bend with
fitting and clapms over flow arrangements with special and
25 mm mosquitto proof coupling of approved design and
painting of fitting and brackets cutting and making good the
wall & floor required including cost of material etc.
complete as per specification no. 11. Each 4.00 5191.20 20764.80
RITES Ltd.,
For and on behalf of DTE 10 Sugnature of the Bidder
Page 12
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
40 75 12.11 KSRB.11.8.1: Providing and fixing white vitreousss china
clay wall corner type lipt front Urinal basin of size
340x410x265mm with 5 litres PVC automatic flushing
cistern, CI/MS brackets standar flush pipe and cp brass
speraders with brass union and GI clamps complete
painting of fitting and brackets cutting and making the good
wall and floor wherever required inlcuding cost material
labour complete as per specification No. KSB 11. unit 4.00 2869.65 11478.60
41 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china
clay,flat back wash basin size 550X400mm with a single
15mm CP brass pillar tap with CI / MS brackets, 32mm CP
brass waste of standard pattern, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. No. KBS 11 unit 10.00 2790.90 27909.00
42 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratoru sink of
white glazed fire clay of size 600x450x200mm with M.S /
C.I brackets , C.P brass chain with rubber plug, 32mm C.P
brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of
materials, labour complete as per specifications. KBS11unit 4.00 3486.00 13944.00
43 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm
bevellead edge mirror of superior glass with 6mm hard
board backing and fixed to wooden cleat with CP Screws,
washers, including cost of materials, labour complete as
per specification. unit 4.00 1304.10 5216.40
44 85 12.112.2 Providing stoneware gully trap of approved quality and
make fixing in CC1:2:4 and plastering with CM1:3 wherever
necessary. (Rate includes cost of all materials, fixtures and
lead) 15x10cms Each 15.00 283.50 4252.50
45 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make
confirming to ISI specification and construction of cistern
in M-15 as per direction (Rate is inclusive of cost of
materials and fixtures and conveyance of materials to work
spot) 10x7.5cmsEach 30.00 262.50 7875.00
46 87 13.1 KSRB 13-1.1: Providing and fixing to wall, ceiling and floor
galvanised/mild steel tube 15mm dia nominal bore with
fittings (medium grade weight 1.27kg/mtr) B class including
cost of all materials, labour charges, HOM of equipments
and tetsing complete as per specifications. Specification
No. KBS 13.2.14/13.8
15mm dia m 50.00 187.95 9397.50
13.2 20mm dia m 75.00 228.90 17167.50
13.3 25mm dia m 100.00 313.95 31395.00
13.4 32mm dia m 100.00 359.10 35910.00
13.5 40mm dia m 50.00 446.25 22312.50
13.6 50mm dia m 150.00 522.90 78435.00
RITES Ltd.,
For and on behalf of DTE 11 Sugnature of the Bidder
Page 13
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
47 87 13.14 KSRB 13-3.5: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 40mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6m 50.00 393.75 19687.50
48 87 13.15 KSRB 13-3.6: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 50mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6m 100.00 451.50 45150.00
49 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib
cock of approved quality 15mm nominal bore including
cost of all materials, labour and HOM of equipments with
all leads complete as per specifications. Specification No.
KBS 13.2.2/13.3Each 15.00 228.90 3433.50
50 88 13.24 KSRB 13-6.1-2 Providing and fixing in position brass bib
cock of approved quality 20mm dia nominal bore including
cost of all materials, labour and HOM of equipments with
all leads complete as per specifications. Specification
No.KBS 13.2.2/13.3Each 15.00 253.05 3795.75
51 88 13.27 KSRB 13-6.2-2: Providing and fixing in position brass stop
cock of approved quality 20mm nominal bore inlcuding
cost of all materials labour and HOM equipment with all
leads complete as per specification. KBS 13.2.2 /13.3Each 15.00 403.20 6048.00
52 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
25mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 10.00 610.05 6100.50
53 89 13.36 KSRB 13.6.3.5 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
40mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 4.00 1315.65 5262.60
54 91 13.78 KSRB 13-11.1: Providing and placing on terrace,
polyethylene water storage tanks with man hole lid and
suitable locking arrangements, making holes of suitable
diameter for inlet, outlet and over flow pipes, including cost
of all materials, labour, transport charges, HOM of
equipments and testing complete as per specifications (for
1000 litre capacity). Specification No. KBS 13.22Nos 4.00 8767.50 35070.00
RITES Ltd.,
For and on behalf of DTE 12 Sugnature of the Bidder
Page 14
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
55 98 14.8 KSRB 14.7-1: Providing and laying flooring with 1:2:4
cement concrete 40mm thick using broken granite metal of
20mm and down size laid to line and level in one layer and
finished with floating coat of neat cement including cost of
materials, labour, curing complete as per specifications.
Specification No. KBS 14.3Sqm 16.00 299.25 4788.00
56 103 14.36.2 KSRB 14.14-5: Providing ceramic tiles of size 30x30cms
of approved make, shade and size for flooring, treads of
steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix flush pointing with white cement using
colour pigment, including cost of materials, labour, curing,
complete as per specifications. Specifications No.KBS
Sqm 74.00 969.15 71717.10
57 103 14.40 KSRB 14-17.1: Providing skirting, dado, rises of steps
with white glazed tiles 6mm thick on 10mm thick cement
plaster 1:3 and jointed with white cement slurry over rough
plaster surface (exculding cost of rough plastered surface
which should be measured and paid separetly) using
glazed tiles of approved make and size including cost of
labour ,materials complete as per specifications.
Specification No KBS 14.16,14.17.Sqm 102.00 1023.75 104422.50
58 104 14.45 Providing vitrified tiles 60cms x 60 cms size of approved
make, shade and size for flooring laid on a bed of 12mm
thick cement motar 1:3 mix, flush pointing with white
cement using coloured pigment , including cost of
materials, labour curing etc complete as per specification.Sqm 867.00 1079.40 935839.80
59 106 14.61 Providing and fixing 20mm thick gang saw water cut
sadarhalli grey granite in CM 1:4 proportion, cut to required
shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant,
grooves in joints including cost of curing.
14.61.2 minimum width of 900 mm Sqm 392.00 1939.35 760225.20
60 109 15.6 KSRB 15.1.5 Providing raised and cut pointing to coursed
stone masonry with cement mortar 1:4 20mm after raking
joints to depth of 20mm nicely lining, including cost of
materials, labour, curing complete as per specifications. Sqm 225.00 122.85 27641.25
61 110 15.16 KSRB 15-3.8: Providing 18mm thick cement plaster in
single coat with cement mortar 1:4 to brick masonry
including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including
cost of materials, labour, curing complete as per
specifications.Sqm 2370.00 183.75 435487.50
62 110 15.19 KSRB 15-3.11: Providing 20 mm thick cement plaster in
single coat with Cement Mortar 1:4 to stone masonry &
concrete surface including rounding off corners wherever
required smooth rendering . Providing and removing
scaffolding including cost of all materials, labour,curing
complete as per specifications . Sqm 1769.00 194.25 343628.25
RITES Ltd.,
For and on behalf of DTE 13 Sugnature of the Bidder
Page 15
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
63 110 15.21 KSRB 15-3.13 : Providing 12mm thick Cement plaster in
single coat with cement mortar 1:3 to Ceiling including
rounding of corners wherever required smooth rendering:
providing and removing, Scaffolding including cost of
materials, labour, curing complete as per specifications.Sqm 1293.00 164.85 213151.05
64 110 15.30 KSRB 15-5.1: Providing rough cement plastering 15mm
thick in single coat with cement mortar 1:4, to brick
masonry for base of dadooing works with sand of approved
quality, providing and removing scaffolding, including cost
of materials, labour, curing complete as per specifications.
Sqm 102.00 145.95 14886.90
65 111 15.33 KSRB 15.7 - Providing lime rendering for plastering to wall
and ceiling including cost of materials, labour, curing
complete as per specifications. Sqm 3663.00 21.00 76923.00
66 111 15.36 KSRB 15.8.1 Providing and fixing plaster mesh 200mm
wide manufactured out of hot dipped galvanized iron of
nominal thcikness 0.35mm with a zinc coating of 120gms
per sqm width, along route of walls chipped for services,
junction between RCC and brick walls including cost of
materials, labour for fixing complete as per specifications
(length of mesh only be measured for payment).m 250.00 44.94 11235.00
67 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two
coats with primer, Plastic Emulsion paint of approved
brand on wall surface to give an even approved shade
after throughly brushing the surface, free from mortar drops
and other foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour,
complete as per the specifications. Sqm 3663.00 84.00 307692.00
68 113 15.51.3 KSRB 15-15.2 : Extra over Item no 15.15.1for painting two
coats with Plastic Emulsion paint of approved brand and
shade on Ceiling complete as per the specifications.Sqm 1293.00 2.84 3672.12
69 117 15.74 KSRB 15-18.2 Providing and applying enamel metal paint
two coats (exculding priming coat) over new steel or other
metal surface brushing to give an even shade after
cleaning oil, grease, dirt and other foreign matters including
cost of materials, labour, complete as per specifications.Sqm 60.00 79.80 4788.00
TOTAL - Part A - KPWD SR Items 21737060.58
Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted
Percentage above / below / at par of KPWD-SR 2014-15 (Bellary Circle) to be indicated for the above items
Percentage in
figure(+) / (-) / At par
Percentage in
wordsPlus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 14 Sugnature of the Bidder
Page 16
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
RITES Ltd.,
For and on behalf of DTE 15 Sugnature of the Bidder
Page 17
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Part B - CPWD SR items
1 147 9.20 Providing and fixing ISI marked flush door shutters confirming to IS
2202 (Part I), decorative type, core of block board construction with
frame of First class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35mm thick including ISI marked stainless steel butt hinges with
necessary screws. Sqm 52.00 2606.45 135535.40
2 174 10.14 Providing and fixing pressed steel door frames confirming to IS: 4351
manufactured from commercial mild steel sheet of 1.60mm thickness
including hinges jamb, lock jamb, bead and if required angle
threshold of mild steel angle of section 50 x 25mm, or base ties of
1.60mm pressed mild steel welded or rigidly fixed together by
mechanical means, adjustable lugs with split end tail to each jamb
including M S pressed butt hinges 2.5mm thick with mortar guards,
lock strike plate and shock absorrbers as specified and applying a
coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge
10.14.1 Profile B10.14.1.
1
Fixing with adjustable lugs with split end tail to each jamb.
Ground floor metre 150.00 377.70 56655.00
3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with nuts and screws
etc. complete.
9.96.2 250X16mmGround floor Each 15.00 189.00 2835.00
4 156 9.97 Providing and Fixing Aluminium tower bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour and shade with necessary
screws etc. complete.
9.97.2 250X 10mmGround floor Each 15.00 95.25 1428.75
5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary
screws etc. complete.
9.100.1 125mm Ground floor Each 30.00 69.80 2094.00
6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI
marked anodisied (anodic coating not less than grade AC 10 as per
IS: 1868) transparent or dyed to required colour or shade with
necessary screws etc. complete.9.101.1 Single rubber stopper
Ground floor Each 15.00 37.50 562.50
7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with
silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10sqm)
Sqm 1,769.00 94.95 167966.55
8 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5Each 2.00 18309.50 36619.00
Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE
Ref. DSR 2014
RITES Ltd.,
For and on behalf of DTE 16 Signature of the Bidder
Page 18
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Ref. DSR 2014
9 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC
pipes including collars/spigot jointed with stiff mixture of cement
mortar in the proportion of 1:2( 1 cement : 2 fine sand) including
testing of joints etc complete
19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00
10 381 24.10 Supplying, assembling, lowering and fixing in vertical position in bore
well, ERW (Electric Resistance Welded) FE 410 mild steel screwed
and socketed/ plain ended casing pipes of required dia, conforming to
IS: 4270, of reputed & approved make, including painted with outside
surface with two coats of anticorrosive paint of approved brand and
manufacture, including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of Engineer-
in-charge.
24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mmmetre 60.00 1335.40 80124.00
Part B - CPWD SR Items 503025.20
Add cost index for Bellary @ 13.33% 67053.26
Part B - CPWD SR Items 570078.46
Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted
Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items
Percentage in
figure(+) / (-) / At par
Percentage in
wordsPlus / Minus / At par
Amount in
Figure
(Rupees)
Amount in
Words
(Rupees)
RITES Ltd.,
For and on behalf of DTE 17 Signature of the Bidder
Page 19
SN Description Unit Qty Rate Amount
Part- C Market Rate Items
1 Filling New approved Excavated
earth/moorum in sides of foundation upto
plinth in layers not exceeding 20cm in depth
compacting each deposited layer by ramming
after watering with a lead upto 5km and lift upto
3m including cost of all labour complete as per
the direction of engineer incharge.Cum 348.00
2 Providing grooves in plastering on walls 2.50 to
4.00cms wide and to the required depth as per
design and finished in cement mortar (1:3)
including curing etc., complete.
Ground floor Rmt 200.00
EXTERNAL WATER SUPPLY
3 Geophysical investigation of site for sinking
borewell for supplying drinking water to the
habitation either through hand pump, MWS or
PWSS by vertical electrical sounding by
adopting Venner or Schlumberger's method,
including reconnaissance survey of Geological
formation, geophysical investigation of existing
ground water in the vicinity indicating the
location of site, recommended depth of casing
pipe required to seal the top unconsolidated
formation including an extra depth of 1m in
consolidated formation for proper seating of
casing pipe, depth of drilling required to cover
full depth of aquifer proposed to be tapped,
probable yield and other information required
including transportation of instrument and
accessories to work site, engaging technical
personnel and labour required etc.,
Each
BW 1.00
4 Sinking Bore Well of 150mm dia clear using
super fast hydraulic rig of capacity 250 PSIG &
above 900 CMF & above in all strata including
over burden upto 20mtrs fixing of casing pipes,
collars and cap with necessary cutting,
threading and welding including transportation
of rig and supporting vehicle, crew charges and
cost of consumables etc., complete including
yield testing at the final depth with a minimum
working of compressor for one hour (excluding
cost of casing pipes, collars, cap etc.)
0- 50 mtrs RMtr 50.00
Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE
RITES Ltd.,
For and on behalf of DTE 18 Signature of the Bidder
Page 20
SN Description Unit Qty Rate Amount
50- 100 mtrs RMtr 50.00
100- 150 mtrs RMtr 50.00
5 Supply, delivery, installation, testing,
commissioning of vertical centrifugal
submersible pump of 6.5HP capable of
pumping 335 lpm against an approximate total
head of 40m from all causes, including
providing 4Cx4sqmm 440V flat core double
sheathed waterproof submersible cable, Star
Delta starter, control panel with dry run
preventer, overload protection and backup
protection and capacitor as required, installed
inside a weather proof kiosk with locking
arrangement of approved design near the
borewell, including making necessary electrical
connections from mains to the starter panel
and from starter panel to the pump. Including
providing and fixing gun metal gate valve and
non-return valve of 50mm n.b on the delivery
side of the pump. Submersible pumps may be
of Atlanta/ KSB/ Kirloskar/ CALAMA/ Suguna
makes.
Each 1.00
6 Yield testing of Borewell at Final depth with a
minimum of 10 hours continuously with the
help of pump testing unit including the cost of
transportation charges, crew charges and cost
of consumables
Each
BW 1.00
TOTAL - Part C - Market Rate Items
The bidder is required to quote his rates in
figure and words for Part C-Market Rate
items
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 19 Signature of the Bidder
Page 21
Part A - KPWD SR 2014 - 15
POINT WIRING
Point wiring using Copper wire without
switch.
1 2.3 5 Supplying and wiring adopting loop system in
existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible
multistrand FRLS PVC insulated,
2x1.5Sq.mm Cable confirming to the GTP
without switch, the other end of the wires shall
be terminated with sufficient loose length in a
wood/PVC round block complete for each outlet.
GROUP A
a2.3.1 5 Short point up to 3 Mtr from tapping point to out
let via switch box Point 10 144.00 1440.00
b2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from
tapping point to out let via switch box Point 50 215.00 10750.00
c2.3.3 5 Long point above 6 Mtr up to 10 Mtr from
tapping point to out let via switch box Point 75 334.00 25050.00
d2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from
tapping point to out let via switches Point 50 423.00 21150.00
2 3.5 15 Supplying and flush mounting powder coated /
galvanized metal box suitable for mounting
modular switch plates. The box should be firmly
flush mounted after due groove cutting in
Brick/Stone/C.C wall
a 3.5.1 15 1-3 Way Each 90 91.00 8190.00
b 3.5.2 15 4-5 Way Each 40 98.00 3920.00
c 3.5.3 15 6 Way Each 95 121.00 11495.00
d 3.5.4 15 8 Way Each 15 140.00 2100.00
e 3.5.5 16 10-12 Way Each 25 159.00 3975.00
3 3.6 16 Supplying and fixing superior quality modular
switch mounting polycarbonate plate with
necessary supporting back plate with required
nos. of machine screws, bolts nuts etc.,
complete on the existing metal/PVC box.
a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00
b 3.6.2 16 4 Module Each 40 122.00 4880.00
c 3.6.3 16 6 Module Each 95 173.00 16435.00
d 3.6.4 16 8 Module Each 15 200.00 3000.00
e 3.6.6 16 12 Module Each 25 267.00 6675.00
Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE - Electrical Works
Unit Qty Rate Amount SN Item No P.No. Description
RITES Ltd.,
For and on behalf of DTE 20 Signature of the Bidder
Page 22
Unit Qty Rate Amount SN Item No P.No. Description
4 3.7 16 Supplying and fixing of modular switch/
Socket/stepped electronic fan regulator/
dimmer/telephone socket etc on existing
modular switch plate as per IS 3854 and IS
1293
GROUP A
a 3.7.1 16 6 Amps one way. Each 300 63.00 18900.00
b 3.7.3 16 6 Amps 3way socket. Each 180 95.00 17100.00
c 3.7.4 16 Stepped Fan Regulator. Each 52 286.00 14872.00
d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00
e 3.7.9 16 32 Amps DP switch Each 20 164.00 3280.00
f 3.7.10 16 6/16 Amps universal socket Each 20 147.00 2940.00
g 3.7.11 16 TV / Telephone socket Each 10 82.00 820.00
h 3.7.12 16 RJ 45 / I.O. outlet Each 65 204.00 13260.00
5 1.12 3 Supplying and Fixing Metal Fan Box with Round
Hook.
No 52 92 4784
1.2 2 Concealed Conduit System
6 Supplying heavy gauge PVC conduit pipe
……mm dia .......mm thick confirming to IS 2509
with suitable size bends, metal/PVC junction
boxes adhesive paste etc., and running before
concreting the slab. The conduit should be tied
to the reinforcement rods by using binding wires
and unused ways of junction boxes and pipe
ends should be covered using PVC end
enclosures. run with 18SWG GI fish wire
wherever necessary
a 1.2.1 2 19/20 mm dia 2mm thick Mtr 1500 43.00 64500.00
b 1.2.2 2 25 mm dia 2mm thick Mtr 2600 57.00 148200.00
c 1.2.3 2 32 mm dia 2.5mm thick Mtr 300 90.00 27000.00
Groove Cutting
7 1.3 2 Supplying heavy gauge PVC Conduit Pipe -----
dia -- mm thick with suitable size bends, metal
junction boxes adhesive paste etc., by groove
cutting in the wall and fixing by bracing U or J
hooks and cement Plastering up to the wall
surface and run with 18 SWG GI fish wire run
throughout the conduit wherever necessary.
a 1.3.1 2 19/20mm dia 2mm thick Mtr 1100 56.00 61600.00
b 1.3.2 2 25mm dia 2mm thick Mtr 1500 58.00 87000.00
c 1.3.3 2 32mm dia 2.5mm thick Mtr 200 88.00 17600.00
8 1.8 3 Supplying and fixing of PVC casing and capping
on the wall or ceiling using necessary materials
like bends, screws at an interval of 300mm ….
Etc as required.
a 1.8.2 3 25mm Mtr 200 26.00 5200.00
b 1.8.4 3 38mm Mtr 200 39.00 7800.00
c 1.8.5 3 50mm Mtr 200 43.00 8600.00
RITES Ltd.,
For and on behalf of DTE 21 Signature of the Bidder
Page 23
Unit Qty Rate Amount SN Item No P.No. Description
9 2.5 6 Wiring for lighting/power circuit using one of
FRLS PVC insulated 1100v grade, multistrand
Copper with low conductor resistance single
core wire in open or concealed system of wiring
with specified IS-694:1990 & confirming to
GTP of GROUP-A
a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00
b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00
c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00
d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00
e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00
DISTRIBUTION BOARDS
10 6.17 47 Supplying and fixing regular MCB distribution
boards on wall / wood board / flush mounting
using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's
single phase / 3 phase / single door with powder
coated painting. Made out of 14 SWG MS
enclosure.
Double Door
a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00
b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00
11 6.16 47 Supplying and fixing miniature circuit breakers
on existing MCB distribution boards using
necessary fixing materials and 'C' Type curve ,
indicator ON/OFF, energy cross-3 with Short
circuit breaking capacity of 10K and complete
wiring as required confirming to IEC 60898.
a 6.16.1 5-32 Amps SP Each 112 418 46816.00
b 6.16.3 5-32 Amps DP Each 4 849 3396.00
c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00
d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00
12 6.18 47 Supplying, fixing and wiring Earth Leakage
Miniature Circuit Breaker [ELMCB] 240/450V up
to 300mA sensitivity on existing wood/panel
board.
a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00
b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00
13 6.43 50 Supplying and fixing of Metal Socket set of
2pole and earth plugs and socket for
incorporating SP and TP MCB (Without MCB ).
The entire plug and socket shall b mounted in a
Thermoplastic / powder coated metal box &
wired Completely.
A) SP & N
a 6.43.2 b) 20 Amps Each 7 918.00 6426.00
RITES Ltd.,
For and on behalf of DTE 22 Signature of the Bidder
Page 24
Unit Qty Rate Amount SN Item No P.No. Description
SUPPLY OF FITTING
14 4.7 20 Supplying Box Type Suitable for 28 W T5 Single
/ Twin lamp & suspension mounted luminaire &
optical reflector,prewired with HF Electronic
Ballast,push fit type lamp holders & main
connectors. Channel cover shall be made of
CRCA MS Sheet and finishing is done with stove
enamelled white with end caps made of
engineering Plastic.
Group - A
a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00
b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00
15 4.9 20 Supplying Surface mounted type mirror optic
luminaries for single / Twin 28 watts fluorescent
lamps cross rising of stove enameled deep
coloured M.S.low profile housing complete with
all accessories and high purity anodized
aluminium reflector assembling along with cross
louvers including necessary fluorescent tubes
with Energy Saving Electronic Ballast.
a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00
16 4.23 24 Supplying CFL mirror light fitting with 1x11W
CFL lamp, choke, Perspex cover and
completely wired for use on 230V 50Hz AC
supply. Each 4 648.00 2592.00
17 4.17 22 Supplying High pressure Metal halide street
light luminary suitable for use with high
pressure metal halide lamp with integrated
control gear & grey color powder coated. The
fitting shall be non corrosive pressure die cast
aluminum housing with high purity anodized
aluminium reflector with EPDM Gaskets suitable
for Outer Dia of pole 40mm - 60mm. Cable
Entry through a cable gland with toggle clips.
IP65 Protection for both optical & Electrical
Compartment. Bottom cover may be with Poly
carbonate/tempered/ toughened glass.
Luminaire efficiency should be >60 % &
ambient temperature > 35 deg C. High Intensity
Discharge Electro Magnetic Ballast with Copper
winding of Orthocyclic winding coil. Class H
insulated dual coated copper wire. Compliance
to IEC 61347-2-9 Safety & IEC 60923 -
Performance. Winding Temperature for HID
Ballast Tw = 130 deg C & temperature rise ?T =
70 deg C. Luminaire shall be suitable to operate
on 230/250 Volts 50 Hz AC supply finish
including wiring, ignitor, condenser. SS Toggles
for opening front hingeable glass.
RITES Ltd.,
For and on behalf of DTE 23 Signature of the Bidder
Page 25
Unit Qty Rate Amount SN Item No P.No. Description
a 4.17.2 23 150Watts Each 4 6300 25200.00
18 9.3 78 Supplying capacitor type ceiling fan complete
with down rod blades, shackle, canopies etc., for
operation on 230 volts, 50 cycles. Single phase
AC supply conforming to ISS-374-1979 and with
double ball bearing system.
9.3.1 48" Sweep (1200mm)
a 9.3.1.1 78 Regular model Each 52 2376.00 123552.00
19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan
with bracket blades suitable to operate on 230V
50Hz, AC Supply complete.
a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00
20 4.2 20 Supplying and fixing PBBC/Bakelite straight or
slant batten holder and wiring with 60 W / 230
volts lamps.Each 12 88.00 1056.00
21 16.1 104 Supplying and fixing one of 230 volts bell or
buzzer and a flush type bell push with gang box
fixed on necessary wooden or rawl plugs using
NF screws. Each 2 145 290.00
FIXING CHARGES
22.0 17.2 108 Supplying and Fixing........mm dia class A GI
pipe bracket up to 2.7 meters long terminated
with a reducing collar of 40x25mm to which
extra pipe of 175mm length is fixed for fixing
MV/SV/MH/FTL street light fitting of all
capacities on rail/RCC/wall/tubular pole, using
suitable clamps, bolts ,nuts and wiring using
suitable capacity wires etc complete.
a 17.2.2 108 Using 32mm dia G.I.pipe Each 4 1140.00 4560.00
23 17.7 108 Fixing all types and all capacities of fluorescent
/ false ceiling / spot light / CFL / LED fittings
indoor on the wall / ceiling/ rafters / girders
using 23/0.0076” twin twisted PVC insulated
wires, required Nos of round blocks and clamps
a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 121 98.00 11858.00
24 17.8 109 Fixing a ceiling / Wall mounting fan of all
capacities and all types to the existing 'S' hook
with fan regulator to the existing board together
with supplying and fixing 5 amps. ceiling rose,
necessary length of 23 / 0.0076 inch PVC
insulated twin twisted copper wire and wiring.Each 52 139.00 7228.00
RITES Ltd.,
For and on behalf of DTE 24 Signature of the Bidder
Page 26
Unit Qty Rate Amount SN Item No P.No. Description
25 17.12 109 Fixing one exhaust fan in the nitch already left
in the wall with bolts and nuts and 5 amps.
Ceiling rose with sufficient length of 23 / 0.0076
inch PVC insulated twin core wire.Each 10 412 4120.00
26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED
floodlight fitting over existing pole / wall ceiling
including clamps, bolts, nuts and wiring using
suitable capacity wires.Each 4 176.00 704.00
27 11.1 85 Supplying and drawing UTP-CAT 6E LAN
cable. Mt. 1600 23.00 36800.00
28 11.2 85 Supplying and drawing PVC flexible one pair
telephone unarmoured tinned copper cable.
a 11.2.2 85 2 Pair mtr 525 13 6825.00
28 1.4 2 Supplying and fixing sheet metal box made out
of 18 SWG sheet metal with necessary holes for
cable/conduit entry as required with one coat of
primer of approved make etc.
a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00
29 7.4 55 Supplying of 1.1 KV LT UG cable having
aluminium conductor PVC insulated, extruded
inner sheated , galvanized , steel strip (except
2C X 10 Sq.mm wire armoured) confirming to IS
- 3975 : 1990 (No. of strip indicated in GTP) &
extruded PVC outer sheated armoured cable
with specified IS - 1554 Part - 1:1988 &
confirming to GTP of Group - A.
7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00
7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00
30 7.8 61 Labour charges for laying of 1.1 KV class UG
cable in existing trench GI pipe / stoneware pipe
/ on wall / on pole as required.
In existing trench / duct.
7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00
7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00
31 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide
refilling the trench to the required ground level
and consolidating etc., complete. (As per Civil
SR KSRB I - 2, P - 7)
7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00
32 7.10 62 Providing and filling sand in excavated trench
to cover already laid UG cable to adepth of 150
mm all - round the cable.Mtr 110 103.00 11330.00
RITES Ltd.,
For and on behalf of DTE 25 Signature of the Bidder
Page 27
Unit Qty Rate Amount SN Item No P.No. Description
33 7.14 62 Supplying and fixing of heavy duty cable
glands suitable for UG cable of 1.1 KV class
(metal only)
7.14.2 62 25 mm dia Each 4 86.00 344.00
7.14.4 62 45 mm dia Each 2 200.00 400.00
34 7.21 64 Supplying tinned copper lugs and crimping and
wiring to terminal point for wire of the following
sizes.
7.21.6 64 16 sqmm Each 16 11.31 180.96
7.21.12 64 120 sqmm Long Barrel Each 8 196.56 1572.48
EARTHING
35 7.2 55 Supplying fixing and wiring earth electrode for
grounding of lifts, transformers, DG sets etc.
using 40mm dia 2.9mm thick 2.5 mtr long GI
pipe with GI funnel with mesh and suitable size
reducer fixed on the top of the earth electrode.
The funnel should be enclosed in a CC chamber
of 400x400x400mm with a cast iron cover. The
earth electrode shall have staggered holes of
12mm dia and the electrode should be covered
150mm alround with alternate layers of salt and
charcoal from the bottom of the CC chamber.
The connection from the electrode is to be
established through GI strip using GI bolts and
nuts.Each 6 4317.00 25902.00
36 7.3 55 Supplying and running of GI/Copper strips for
grounding connections, using necessary fixing
materials as required.
GI strip
a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00
c 7.3.10 55 600 x 600 x 3 mm copper plate Each 2 7148.00 14296.00
37 7.22 64 Supplying and running GI/Copper conductor
for grounding and (along with other wires in
conduit system of wiring) using necessary
suitable size clamps, nails, guttas/spacers etc.,
Copper Wire.
b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00
RITES Ltd.,
For and on behalf of DTE 26 Signature of the Bidder
Page 28
Unit Qty Rate Amount SN Item No P.No. Description
38 7.12 62 Supplying and fixing of class A (medium duty)
GI pipe of wall thickness not less than 3.25mm
on pole/wall/drain crossing with necessary
clamping arrangements for UG cable of 1.1 KV.
a 7.12.2 62 50mm Mtr 20 391.00 7820.00
b 7.12.5 62 100mm Mtr 15 920.00 13800.00
Part A - KPWD SR Items - Electrical works 1702546.44
Total Quoted Cost of Electrical Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the
above items
Percentage in
figure
(+) / (-) / At par
Percentage in
words
Plus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 27 Signature of the Bidder
Page 29
SN Description of Work Unit Qty Rate Amount
Part B - Market Rate Items
Main Power Panel
1 Main Power Panel
Supply, installation, testing and commissioning of LT
Main Power Panel fabricated out of 16 SWG sheet
steel metal floor mounting type with all normal
practice like derusting, degreasing, phosphating,
powder coated to the approved make as per
specification, comprisiing of the following:-
Incomer
I. 250 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0 - 500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
vi. 250 A 4P Change Over Switch - 1no
Outgoing
i125 A 3P +NL - 1 No
i 63 A 16 KA 3P MCCB - 12 nos.
ii. 40 A 4Pole MCB - 4nos. Nos 1.00
2 Sub MV Panel
Supply, installation, testing and commissioning of LT
Sub MV Panel fabricated out of 16 SWG sheet steel
metal floor mounting type with all normal practice like
derusting, degreasing, phosphating, powder coated
to the approved make as per specification,
comprisiing of the following:-
Incomer
I. 125 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0-500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
Outgoing
iii. 63 A 4Pole 16 KA MCCB - 12 nos.
iii. 40 A 4Pole MCB - 3 nos. Nos 1.00
Part B - Market rate Items - Electrical works
The bidder is required to quote his rates in figure
and words for Part B-Non SR items of Electrical
works
Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE - Electrical Works
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 28 Signature of the Bidder
Page 30
SN DESCRIPTION AMOUNT
Civil Works
1 Part A - KPWD SR Items `
2 Part B - CPWD SR Items `
3 Part C - Market rate Items `
Electrical Works
1 Part A - KPWD SR Items `
2 Part B - Market Rate items `
TOTAL - Schedule II `
TOTAL
(in Words) - Rupees
CConstruction of Govt. Polytechnic College at Kartagi in Koppal
District for DTE
Abstract - Schedule - II
RITES Ltd.,
For and on behalf of DTE 29 Sugnature of the Bidder
Page 31
Description Unit Qty
P. No l No
Part- A - KPWD SR Items
1 132 18.10 KSRRB M200-7.1: Clearing grass and removal of rubbish
by manual means and stacking outside the periphery of the
area cleaned complete as per specifications. MORTH
Specification No. 201 Ha 0.40 14671.65 5868.66
5 7 2.24 Earth work for lowering and levelling the ground other than
foundation works by mechanical means up to 3.00 depth,
including providing shoring and strutting, removal of
stumps and other deleterious matter, dressing of sides and
bottom, filling back the excavation earth to the extent
required including the cost of labour & HOM of
machineries, as per drawing and technical specification. Cum 715.00 54.60 39039.00
6 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of
buildings, water supply, sanitary lines and electrical
conduits either in pits or in trenches 1.5m and above in
width in Hard soil not exceeding 1.5m in depth, including
dressing the bottom and sides of pits and trenches,
stacking the excavated soil clear from edges of excavation
with lead upto 50 m after breaking of clods complete as per
specifications. Specification No. KBS 2.1 (b)/2.3.5Cum 782.00 257.25 201169.50
7 5 2.6 KSRB 2-2.4: Excavation 1.5m and above in width in soft
rock without blasting for foundation of buildings, water
supply, sanitary lines and electrical conduits either in pits or
in trenches not exceeding 1.5m in depth, stacking the
excavated stuff from edges of excavation with lead upto
50m including cost of labour and HOM of euipment
complete as per specifications. Specification. No KBS 2.1.d
/ 2.9.4 / 2.18 / 2.19Cum 326.00 796.95 259805.70
8 5 2.8 KSRB 2.2.6: Excavation 1.5m and above in width in hard
rock by chiselling and/or wedging, where blasting is
prohibited for foundation of buildings, water supply, sanitary
lines and electrical conduits either in pits or in trenches
1.5m in depth stacking the excavated stuff clear from the
edge of excavation with lead upto 50m including cost of
labour complete as per specifications. Specification No.
KBS cum 196.00 1143.45 224116.20
9 6 2.10 KSRB 2.3 :Filling available excavated earth (excluding
rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited
layer by ramming after watering with lead upto 50 m. and
lift upto 1.5m. Including cost of all labour complete as per
speicifications. Specification No. KBS 2.9 Cum 1497.00 115.50 172903.50
AmountRate
Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE
Sl No Bellary SR -
2014-15
RITES Ltd.,
For and on behalf of DTE 30 Signature of the Bidder
Page 32
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
10 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for
Pre-constructional Anti-Termite Treatment, creating
continuous chemical barrier under and around the column
pits,walls ,trenches,basement excavation,top surface of the
plinth filling, junction of wall and floor, along the external
perimeter of building, expansion joints, over the top surface
of consolidated earth on which apron is to be laid,
surrounding of pipes and conduits, with chloropyriphos
emulsifiable concentrates of 20%concentration, including
cost of chemical, diluting in water to one percent
concentration, labour, HOM of equipments, complete as
per specifications.(Plinth area of the building at ground floor
only shall be measured ) Specification No. KBS 3.2.6 /
3.2.7 Sqm 1320.00 105.00 138600.00
11 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement
concrete of mix 1:4:8 with OPC cement @ 180kgs, with
40mm and down size graded granite metal coarse
aggregates @ 0.85cum and fine aggregates @ 0.57cum
machine mixed, concrete laid in layers not exceeding
15cms, thick, well compacted, in foundation including cost
of all materials, labour, HOM of machinery, curing complete
as per specifications. specification No KBS 4.1,4.2
Cum 195.00 4250.40 828828.00
12 13 4.7 KSRB 4-1.7: Providing and laying in position plain cement
concrete of mix 1:3:6 with OPC cement @220 kgs with
20mm and down size graded granite metal coarse
aggregates @ 0.84 cum and fine aggregates @ 0.56 cum,
machine mixed, concrete laid in layers not exceeding 15
cms, thick, well compacted, in foundation, plinth and cills,
including cost of all materials, labour, HOM of machinery,
curing complete as per specifications. Specification No
KBS 4.1,4.2 15.00 4753.35 71300.25
13 13 4.12 KSRB 4-2.7: Providing and laying in position reinforced
cement concrete of design mix M 25 with OPC cement @
340 kgs with 20mm and down size graded granite metal
coarse aggregates @ 0.70 cum and fine aggregates @
0.47 cum, with superplastisiser at 3.0 lts. conforming to
IS9103-1999 reaffirmed -2008, machine mixed, concrete
laid in layers not exceeding 15 cms, thick, vibrated for all
works in ground floor level for roof slabs, staircase, lintels,
retaining wals, return walls, walls(any thickness ) including
attached plasters, columns, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed
blocks, anchour blocks, plain windows cills, fillets etc.,
inclduing cost of all materials, labour, HOM of machinery,
curing complete as per specification s. Specification No
KBS 4.1,4.6 cum 755.00 5835.90 4406104.50
14 14 4.20 KSRB 4.2.11 : Providing and laying in position reinforced
cement concrete of design mix M20 with OPC cement @
27.20 kgs with 12 mm and down size graded granite metal
course aggregate @0.05865 cum and fine aggregates @
0.0391 cum, with superplastisiser @ 0.225 lts, machine
mixed, well compacted for plain Chajja of 8.5 cms. average
thickness upto ground floor level, including cost of all
materials, labour, HOM of machinery, finishing , curing,
complete as per specifications. Specification No. 4.1, 4.6Sqm 68.00 464.10 31558.80
15 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete
including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2 Sqm 561.00 228.90 128412.90
RITES Ltd.,
For and on behalf of DTE 31 Signature of the Bidder
Page 33
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
16 15 4.18 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as roofs, landings, balconies and likes,
thickness up to 200mm including cost of all materials,
labour complete as per specifications upto 3.5m from
ground level , Specification No. KBS 4.6.2Sqm 1236.00 305.55 377659.80
17 15 4.32 KSRB 4-6.5: Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars, post and struts,
square /rectangular / polygon in plan including cost of all
materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1145.00 354.90 406360.50
18 16 4.34 KSRB 4-6.7: Providing and removing centering, shuttering,
strutting, propping etc., an removal of form work for sides
and soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth including
cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1337.00 253.05 338327.85
19 16 4.37 KSRB 4-6.10: Providing and removing centering,
shuttering, strutting, propping etc., for chajjas, corbels etc.,
including edges including cost of all materials, labour
complete as per specification. Specification No.KBS 4.6.2 Sqm 81.00 262.50 21262.50
20 16 4.38 KSRB 4-6.11 :Providing and removing
centering,shuttering,strutting,propping etc., and removal of
form work for stairs (excluding landing) except spiral
staircase including cost of all materials, labour complete as
per specification. Specification NO. KBS 4.6.2 Sqm 56.00 476.70 26695.20
21 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C
work including straightening, cutting, bending, hooking,
placing in position, lapping and / or welding wherever
required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per
design (laps, hooks and wastage shall not be measured
and paid) cost of materials, labour, HOM of machinery
complete as per specifications. Specification No. KBS 4.6.3
4.46.2 For TMT bars Fe 500 Tonne 74.00 73799.25 5461144.50
22 23 5.6 KSRB-5.2-3 : Providing and constructing Granite/ trap/
basalt size stone masonry in foundation with cement mortar
1:6, stone hammered dressed in courses not less than
20cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per
specifications. KBS 5.1.13 Cum 221.00 3992.10 882254.10
23 23 5.9 KSRB 5.3-3: Providing and constructing granite/trap/
basalt Size stone masonry in basement with cement
mortar 1:6 ,edges of stones chistle dressed in courses not
less than 15cms high, bond stones at two m, apart in each
course including cost of materials, labour, curing complete
as per specifications, KBS 5.1.13 Cum 81.00 4912.95 397948.95
24 28 6.3 KSRB 6-1.3 : Providing and constructing burnt brick
masonry for basement and superstructure with approved
quality of non-modular bricks of standard size of class
designation 35 with cement mortar 1:6 including cost of
materials, labour charges, scaffolding, curing complete as
per specifications. Specification No. KBS 6.2 cum 484.00 5238.45 2535409.80
RITES Ltd.,
For and on behalf of DTE 32 Signature of the Bidder
Page 34
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
25 28 6.25 KSRB 6-7.4 : Construction of partition wall 11.2 cm thick
with non modular table moulded burnt brick of class
designation 35 with cement mortar 1:4 including cost of
materials labour charges, scaffolding, curing complete as
per specification KBS 6.2 Sqm 41.00 704.55 28886.55
26 31 7.1 KSRB 7.1: Providing and fixing in position collapsible
steel shutters with single or double leaf with vertical
channel 20x10x2mm braced with flat iron diagonals
20x5mm size with top and bottom rails of 'T' iron sections of
40x40x6mm with 38mm dia steel pulleys complete with bolt
and nuts locking arrangements, stoppers, handles on both
sides with 7.5cms openings at 10cms c to c applying a
priming coat of red lead paint . Cost of mateials, labour,
HOM of machinery complete as per specifications. Size of
Gate 2.4m x 1.4m. Specification No.KBS 7.7/7.12. Sqm 15.00 4566.45 68496.75
27 39 7.24.1 c Providing and fixing cold rolled prepainted steel windows
of IS standards, made out of 0.6mm thick deep drawing
quality galvanised on both sides 120gms / sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and
finish painted with a polyester based paint 20 microns thick.
The size of profiles is approximately 46x52mm for external
frames, 46x46mm section for shutters, 46x70mm section
for centre mullion / transom and 18x31mm section is for
fixing glasses. The section should be cut to length joint
mitred and assembling by means of corner brackets made
out of cold rolled annealed strips of 1.2mm thick duly
galvanised and fixed with nickle plated self taping screws.
The shutters are provided with approved quality of fixtures
like handles made out of zamac alloy die cast and powder
coated, receiver made out of glass filled nylon and hinges
made out of CRCA powder coated. 4mm thick glass should
be fixed with EPDM gaskets. The above frames are fixed to
the concrete / masonary walls by means of self expanding
screws.- with 4mm float glass and with guard bars.
Sqm 140.00 4200.00 588000.00
28 43 7.39 Providing and fixing 304 grade stainless steel hand rails of
14-gauge pipes for Ramps or staircase are made out of
stainless steel hollow pipes using 50mm dia for verticals @
1.60 mtr c/c are fixed to the ramps or steps by drilling with
bolts and 100mm dia MS base plates 10mm guage for
fixing of vertical pipes 4-Nos anchor bolts & 40mm dia
pipes are fixed horizontally for 2 rows top, one pipes are
fixed with vertical pipes another one are fixed with elbows
and 25mm dia pipes are fixed horizontally for 2 rows below
top measure @ equal intervals including cutting, welding,
bending wherever necessary with suitable caps @ tops,
bottoms & corners finishing with mat/shining etc., complete
including cost and conveyance of all materials, labour for
all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other
incidental charges etc., complete as per specification and
directions of Engineer-in-charge of the work. Ramps or
staircase for physically challengedsqm 10.00 6081.60 60816.00
29 47 8.19 Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E.
rain down water pipes 110mm outer dia approved make
and brand with necessary special like shoes, bends, and
offsets fixed with iron clamps, wall plugs, screws, including
cost of materials, labour, complete as per specifications.
m 200.00 603.75 120750.00
RITES Ltd.,
For and on behalf of DTE 33 Signature of the Bidder
Page 35
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
30 59 9.93 Providing and fixing factory made single leaft rigid GRP
Sandwich composite door shutter of 32mm thick, laminated
with two GRP skins with wood grain finish, fabricated using
U.V-stabilized Isopathic Gelcoat and on layer of 45 gsm E-
class Chopped strand Mat (CSM), impregnated with
orthopthalic polyster resin. The thickness of the skins shall
not be less than 1.5mm. Expanded Polystyrene (EPS)
structural foam panel of 29mm thickness and a density of
20Kg/m3 shall be used as core mterial. Wooden
reinforcements made of seasoned Salwood block of cross
section not less than 28mmX32mm and also necessary
salwood reinforcements for fixing the metal fittings such as
tower bolts, aldrops, handles etc shall be provided. A
structural adhesive compatible with EPS foam shall be
used for bonding the core material, the salwood
reinforcement and the skins.
The material and process for manufacturing the door
shutters shall confirm to RV/TIFAC composites Design
Centre standards and specifications and the door shutters
tested in confirmation to IS 4020-1994. The finish of shutter
will be plain colour White/Ivory/Beige/Light Grey or any
other colour using high quality pigments. Excluding cost of
fixtures and inclusive of supply of shutters to respective
work spot. Sqm 17.00 3360.00 57120.00
31 60 9.96 Providing and fixing 65mm X 125mm GRP Door frame
fabricated using E-Glass Chopped Strand Mat (CSM) U.V -
sablized Isopathlic Gelcoat and Isopthalic resin. The
thickness of the GRP Skin shall not be less than 2.0mm.
The door frame consists of four segments, which are
provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined
together by means of screws. The GRP frame shall be
provided with wooden reinforcement on 6 locations for high
screw holding capacity for fixing metalling hold fast and
shall be consolidated by filling with medium density
foam/plaster of paris with fibre reinforcement. Six numbers
of 260mmX25mmX5mm size S shaped M.S. flat hold fast
shall be provided with the frame.m 50.00 593.25 29662.50
32 85 12.116 Providing and fixing to wall, ceiling and floor unplaticised
PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall
clips etc and making good the wall, ceiling and floor for
sanitary pipelines including cost of all materials, labour
charges, HOM of acquirements and testing complete as
per specifications.
12.116.1 -do-110mm dia m 100.00 427.35 42735.00
12.116.2 -do-140mm dia m 150.00 694.05 104107.50
RITES Ltd.,
For and on behalf of DTE 34 Signature of the Bidder
Page 36
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
33 68 11.37 KSRB 12-5.1: Construction brick masonry circular type
man hole 0.91m internal diameter at bottom 0.91m and
0.56mt dia at top with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-20
grade desination) 560mm internal diameter confirming to IS
12592, total weight cover and frame to be not less than 182
Kg fixed in cement concrete 1:2:4 20mm and down size
broken granite metal providing and removing centering
shuttering including cost of material , labour charges HOM
of machineries complete as per specification NO KBS12.4
Nos 2.00 12218.85 24437.70
34 69 11.38 KSRB 12-5.2: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 1.67m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-20
frade designation) 560mm internal diameter confirming to
IS 12592, total weight cover and frame to be not less than
182 Kg fixed in cement concrete 1:2:4 20mm and down
size broken granite metal providing and removing centering
shuttering including cost of material , labour charges HOM
of machineries complete as per specification NO KBS12.4
Nos 1.00 18924.15 18924.15
35 69 11.40 KSRB 12-5.4: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 2.29m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 frade designation) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4 Nos 1.00 28009.80 28009.80
RITES Ltd.,
For and on behalf of DTE 35 Signature of the Bidder
Page 37
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
36 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection
chamber 455x610mm, and 450mm depth. (clear inside
dimension) for single pipeline, using table moulded non-
modular bricks of class designation 50 in cement mortar
1:5, C.I cover with frame (light duty) 455x610mm internal
dimensions. total weight of cover with frame to be not less
than 38 kg (weight of cover 23kg and weight of frame 15
kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm
and downsize granite metal, foundation concrete 1:5:10
with 40mm and downsize granite metal inside plastering
12mm thick with cement mortar 1:3, finish smooth with a
floating coat of cement on walls and bed concrete complete
as per standard design including cost of materials, labour
charges, curing complete as per specifications.
Nos 2.00 6357.75 12715.50
37 71 11.52 KSRB 12-8.2: Construction brick masonry inspection
chamber 500x700mm and 450mm depth (clear inside
dimension) for pipeline with one or two inlets, using table
moulded non modular bricks of class designation 50 in
cement mortar 1:5 , CI cover with frame ( light duty)
455x610mm internal dimension, total weight of cover with
frame to be not less than 38Kg (weight of cover 23kg and
weight of frame 15kg) RCC top slab with cement concrete
1:2:4 mix 20mm and downsize granite metal, foundation
concrete 1:5:10 with 40mm and downsize granite metal
inside plastering 12mm thick with cement mortar 1:3
finished smooth with floating coat of cement on walls and
bed concrete complete as per standard design including
cost of materials, labour charges, curing complete as per
specifications. Each 1.00 7207.20 7207.20
38 74 12.1 KSRB 11.1 : Providing and fixing white vitreous chine clay
water closet Indian type (Sqatting pan) of size 580mm
with foot rests, 100mm S or P tarp, 10 litres low level, PVC
flushing cistren (all are approved make) with fittings, CI /MS
brackets, 32mm dia flush pipe fittings and clamps, overflow
arrangements with special and 25mm mosquito proof
coupling of approved design, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. KBS 11. Pan 4.00 3580.50 14322.00
39 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay
water closet European type (pedestrial type, P trap) with
black solid plastic sheet and lead cover, CP brass hinges,
rubber buffer 10 litres low level PVC flushing chintrens with
fittings CI / MS bracket 50 mm dia meter flush bend with
fitting and clapms over flow arrangements with special and
25 mm mosquitto proof coupling of approved design and
painting of fitting and brackets cutting and making good the
wall & floor required including cost of material etc. complete
as per specification no. 11. Each 4.00 5191.20 20764.80
40 75 12.11 KSRB.11.8.1: Providing and fixing white vitreousss china
clay wall corner type lipt front Urinal basin of size
340x410x265mm with 5 litres PVC automatic flushing
cistern, CI/MS brackets standar flush pipe and cp brass
speraders with brass union and GI clamps complete
painting of fitting and brackets cutting and making the good
wall and floor wherever required inlcuding cost material
labour complete as per specification No. KSB 11. unit 4.00 2869.65 11478.60
RITES Ltd.,
For and on behalf of DTE 36 Signature of the Bidder
Page 38
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
41 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china
clay,flat back wash basin size 550X400mm with a single
15mm CP brass pillar tap with CI / MS brackets, 32mm CP
brass waste of standard pattern, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. No. KBS 11 unit 10.00 2790.90 27909.00
42 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratoru sink of
white glazed fire clay of size 600x450x200mm with M.S /
C.I brackets , C.P brass chain with rubber plug, 32mm C.P
brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of
materials, labour complete as per specifications. KBS11unit 4.00 3486.00 13944.00
43 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm
bevellead edge mirror of superior glass with 6mm hard
board backing and fixed to wooden cleat with CP Screws,
washers, including cost of materials, labour complete as
per specification. unit 4.00 1304.10 5216.40
44 85 12.112.2 Providing stoneware gully trap of approved quality and
make fixing in CC1:2:4 and plastering with CM1:3 wherever
necessary. (Rate includes cost of all materials, fixtures and
lead) 15x10cms Each 15.00 283.50 4252.50
45 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make
confirming to ISI specification and construction of cistern in
M-15 as per direction (Rate is inclusive of cost of materials
and fixtures and conveyance of materials to work spot)
10x7.5cms Each 30.00 262.50 7875.00
46 87 13.1 KSRB 13-1.1: Providing and fixing to wall, ceiling and floor
galvanised/mild steel tube 15mm dia nominal bore with
fittings (medium grade weight 1.27kg/mtr) B class including
cost of all materials, labour charges, HOM of equipments
and tetsing complete as per specifications. Specification
No. KBS 13.2.14/13.8
15mm dia m 50.00 187.95 9397.50
13.2 20mm dia m 75.00 228.90 17167.50
13.3 25mm dia m 100.00 313.95 31395.00
13.4 32mm dia m 100.00 359.10 35910.00
13.5 40mm dia m 50.00 446.25 22312.50
13.6 50mm dia m 150.00 522.90 78435.00
47 87 13.14 KSRB 13-3.5: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 40mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6 m 50.00 393.75 19687.50
48 87 13.15 KSRB 13-3.6: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 50mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6 m 100.00 451.50 45150.00
RITES Ltd.,
For and on behalf of DTE 37 Signature of the Bidder
Page 39
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
49 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib
cock of approved quality 15mm nominal bore including
cost of all materials, labour and HOM of equipments with all
leads complete as per specifications. Specification No.
KBS 13.2.2/13.3 Each 15.00 228.90 3433.50
50 88 13.24 KSRB 13-6.1-2 Providing and fixing in position brass bib
cock of approved quality 20mm dia nominal bore including
cost of all materials, labour and HOM of equipments with all
leads complete as per specifications. Specification No.KBS
13.2.2/13.3 Each 15.00 253.05 3795.75
51 88 13.27 KSRB 13-6.2-2: Providing and fixing in position brass stop
cock of approved quality 20mm nominal bore inlcuding
cost of all materials labour and HOM equipment with all
leads complete as per specification. KBS 13.2.2 /13.3Each 15.00 403.20 6048.00
52 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
25mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 10.00 610.05 6100.50
53 89 13.36 KSRB 13.6.3.5 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
40mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 4.00 1315.65 5262.60
54 91 13.78 KSRB 13-11.1: Providing and placing on terrace,
polyethylene water storage tanks with man hole lid and
suitable locking arrangements, making holes of suitable
diameter for inlet, outlet and over flow pipes, including cost
of all materials, labour, transport charges, HOM of
equipments and testing complete as per specifications (for
1000 litre capacity). Specification No. KBS 13.22 Nos 4.00 8767.50 35070.00
55 98 14.8 KSRB 14.7-1: Providing and laying flooring with 1:2:4
cement concrete 40mm thick using broken granite metal of
20mm and down size laid to line and level in one layer and
finished with floating coat of neat cement including cost of
materials, labour, curing complete as per specifications.
Specification No. KBS 14.3 Sqm 16.00 299.25 4788.00
56 103 14.36.2 KSRB 14.14-5: Providing ceramic tiles of size 30x30cms
of approved make, shade and size for flooring, treads of
steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix flush pointing with white cement using
colour pigment, including cost of materials, labour, curing,
complete as per specifications. Specifications No.KBS
Sqm 74.00 969.15 71717.10
57 103 14.40 KSRB 14-17.1: Providing skirting, dado, rises of steps
with white glazed tiles 6mm thick on 10mm thick cement
plaster 1:3 and jointed with white cement slurry over rough
plaster surface (exculding cost of rough plastered surface
which should be measured and paid separetly) using
glazed tiles of approved make and size including cost of
labour ,materials complete as per specifications.
Specification No KBS 14.16,14.17. Sqm 102.00 1023.75 104422.50
RITES Ltd.,
For and on behalf of DTE 38 Signature of the Bidder
Page 40
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
58 104 14.45 Providing vitrified tiles 60cms x 60 cms size of approved
make, shade and size for flooring laid on a bed of 12mm
thick cement motar 1:3 mix, flush pointing with white
cement using coloured pigment , including cost of
materials, labour curing etc complete as per specification.Sqm 867.00 1079.40 935839.80
59 106 14.61 Providing and fixing 20mm thick gang saw water cut
sadarhalli grey granite in CM 1:4 proportion, cut to required
shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant,
grooves in joints including cost of curing.
14.61.2 minimum width of 900 mm Sqm 392.00 1939.35 760225.20
60 109 15.6 KSRB 15.1.5 Providing raised and cut pointing to coursed
stone masonry with cement mortar 1:4 20mm after raking
joints to depth of 20mm nicely lining, including cost of
materials, labour, curing complete as per specifications. Sqm 225.00 122.85 27641.25
61 110 15.16 KSRB 15-3.8: Providing 18mm thick cement plaster in
single coat with cement mortar 1:4 to brick masonry
including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including
cost of materials, labour, curing complete as per
specifications. Sqm 2370.00 183.75 435487.50
62 110 15.19 KSRB 15-3.11: Providing 20 mm thick cement plaster in
single coat with Cement Mortar 1:4 to stone masonry &
concrete surface including rounding off corners wherever
required smooth rendering . Providing and removing
scaffolding including cost of all materials, labour,curing
complete as per specifications . Sqm 1769.00 194.25 343628.25
63 110 15.21 KSRB 15-3.13 : Providing 12mm thick Cement plaster in
single coat with cement mortar 1:3 to Ceiling including
rounding of corners wherever required smooth rendering:
providing and removing, Scaffolding including cost of
materials, labour, curing complete as per specifications. Sqm 1231.00 164.85 202930.35
64 110 15.30 KSRB 15-5.1: Providing rough cement plastering 15mm
thick in single coat with cement mortar 1:4, to brick
masonry for base of dadooing works with sand of approved
quality, providing and removing scaffolding, including cost
of materials, labour, curing complete as per specifications.
Sqm 102.00 145.95 14886.90
65 111 15.33 KSRB 15.7 - Providing lime rendering for plastering to wall
and ceiling including cost of materials, labour, curing
complete as per specifications. Sqm 3601.00 21.00 75621.00
66 111 15.36 KSRB 15.8.1 Providing and fixing plaster mesh 200mm
wide manufactured out of hot dipped galvanized iron of
nominal thcikness 0.35mm with a zinc coating of 120gms
per sqm width, along route of walls chipped for services,
junction between RCC and brick walls including cost of
materials, labour for fixing complete as per specifications
(length of mesh only be measured for payment).m 250.00 44.94 11235.00
RITES Ltd.,
For and on behalf of DTE 39 Signature of the Bidder
Page 41
Description Unit Qty
P. No l No
AmountRateSl No Bellary SR -
2014-15
67 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two coats
with primer, Plastic Emulsion paint of approved brand on
wall surface to give an even approved shade after
throughly brushing the surface, free from mortar drops and
other foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour,
complete as per the specifications.Sqm 3601.00 84.00 302484.00
68 113 15.51.3 KSRB 15-15.2 : Extra over Item no 15.15.1for painting two
coats with Plastic Emulsion paint of approved brand and
shade on Ceiling complete as per the specifications.Sqm 1231.00 2.84 3496.04
69 117 15.74 KSRB 15-18.2 Providing and applying enamel metal paint
two coats (exculding priming coat) over new steel or other
metal surface brushing to give an even shade after
cleaning oil, grease, dirt and other foreign matters including
cost of materials, labour, complete as per specifications.Sqm 60.00 79.80 4788.00
TOTAL - Part A - KPWD SR Items 21870757.40
Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 (Bellary Circle) to be indicated for the above items
Percentage
in figure
(+) / (-) / At par
Percentage
in words
Plus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 40 Signature of the Bidder
Page 42
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Part B - CPWD SR items
1 147 9.20 Providing and fixing ISI marked flush door shutters confirming to IS
2202 (Part I), decorative type, core of block board construction with
frame of First class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35mm thick including ISI marked stainless steel butt hinges with
necessary screws. Sqm 52.00 2606.45 135535.40
2 174 10.14 Providing and fixing pressed steel door frames confirming to IS: 4351
manufactured from commercial mild steel sheet of 1.60mm thickness
including hinges jamb, lock jamb, bead and if required angle
threshold of mild steel angle of section 50 x 25mm, or base ties of
1.60mm pressed mild steel welded or rigidly fixed together by
mechanical means, adjustable lugs with split end tail to each jamb
including M S pressed butt hinges 2.5mm thick with mortar guards,
lock strike plate and shock absorrbers as specified and applying a
coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge10.14.1 Profile B10.14.1.
1
Fixing with adjustable lugs with split end tail to each jamb.
Ground floor metre 150.00 377.70 56655.00
3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with nuts and screws
etc. complete.9.96.2 250X16mm
Ground floor Each 15.00 189.00 2835.00
4 156 9.97 Providing and Fixing Aluminium tower bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour and shade with necessary
screws etc. complete.9.97.2 250X 10mm
Ground floor Each 15.00 95.25 1428.75
5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary
screws etc. complete.9.100.1 125mm Ground floor Each 30.00 69.80 2094.00
6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI
marked anodisied (anodic coating not less than grade AC 10 as per
IS: 1868) transparent or dyed to required colour or shade with
necessary screws etc. complete.9.101.1 Single rubber stopper
Ground floor Each 15.00 37.50 562.50
7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with
silicone additives of required shade:13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10sqm)Sqm 1,769.00 94.95 167966.55
8 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 2.00 18309.50 36619.00
9 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC
pipes including collars/spigot jointed with stiff mixture of cement
mortar in the proportion of 1:2( 1 cement : 2 fine sand) including
testing of joints etc complete19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00
Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE
Ref. DSR 2014
RITES Ltd.,
For and on behalf of DTE 41 Signature of the Bidder
Page 43
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Ref. DSR 2014
10 381 24.10 Supplying, assembling, lowering and fixing in vertical position in bore
well, ERW (Electric Resistance Welded) FE 410 mild steel screwed
and socketed/ plain ended casing pipes of required dia, conforming to
IS: 4270, of reputed & approved make, including painted with outside
surface
with two coats of anticorrosive paint of approved brand and
manufacture, including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of Engineer-
in-charge.24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mm metre 60.00 1335.40 80124.00
Part B - CPWD SR Items 503025.20
Add cost index for Bellary @ 13.33% 67053.26
Part B - CPWD SR Items 570078.46
Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted
Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items
Percentage
in figure
(+) / (-) / At par
Percentage
in words
Plus / Minus / At par
Amount in
Figure
(Rupees)
Amount in
Words
(Rupees)
RITES Ltd.,
For and on behalf of DTE 42 Signature of the Bidder
Page 44
SN Description Unit Qty Rate Amount
Part- C Market Rate Items
1 Filling New approved Excavated
earth/moorum in sides of foundation upto
plinth in layers not exceeding 20cm in depth
compacting each deposited layer by ramming
after watering with a lead upto 5km and lift upto
3m including cost of all labour complete as per
the direction of engineer incharge.Cum 467.00
2 Providing grooves in plastering on walls 2.50 to
4.00cms wide and to the required depth as per
design and finished in cement mortar (1:3)
including curing etc., complete.
Ground floor Rmt 200.00
EXTERNAL WATER SUPPLY
3 Geophysical investigation of site for sinking
borewell for supplying drinking water to the
habitation either through hand pump, MWS or
PWSS by vertical electrical sounding by
adopting Venner or Schlumberger's method,
including reconnaissance survey of Geological
formation, geophysical investigation of existing
ground water in the vicinity indicating the
location of site, recommended depth of casing
pipe required to seal the top unconsolidated
formation including an extra depth of 1m in
consolidated formation for proper seating of
casing pipe, depth of drilling required to cover
full depth of aquifer proposed to be tapped,
probable yield and other information required
including transportation of instrument and
accessories to work site, engaging technical
personnel and labour required etc., Each
BW 1.00
4 Sinking Bore Well of 150mm dia clear using
super fast hydraulic rig of capacity 250 PSIG &
above 900 CMF & above in all strata including
over burden upto 20mtrs fixing of casing pipes,
collars and cap with necessary cutting,
threading and welding including transportation
of rig and supporting vehicle, crew charges and
cost of consumables etc., complete including
yield testing at the final depth with a minimum
working of compressor for one hour (excluding
cost of casing pipes, collars, cap etc.)
Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE
RITES Ltd.,
For and on behalf of DTE 43 Signature of the Bidder
Page 45
SN Description Unit Qty Rate Amount
0- 50 mtrs RMtr 50.00
50- 100 mtrs RMtr 50.00
100- 150 mtrs RMtr 50.00
5 Supply, delivery, installation, testing,
commissioning of vertical centrifugal
submersible pump of 6.5HP capable of
pumping 335 lpm against an approximate total
head of 40m from all causes, including
providing 4Cx4sqmm 440V flat core double
sheathed waterproof submersible cable, Star
Delta starter, control panel with dry run
preventer, overload protection and backup
protection and capacitor as required, installed
inside a weather proof kiosk with locking
arrangement of approved design near the
borewell, including making necessary electrical
connections from mains to the starter panel
and from starter panel to the pump. Including
providing and fixing gun metal gate valve and
non-return valve of 50mm n.b on the delivery
side of the pump. Submersible pumps may be
of Atlanta/ KSB/ Kirloskar/ CALAMA/ Suguna
makes. Each 1.00
6 Yield testing of Borewell at Final depth with a
minimum of 10 hours continuously with the
help of pump testing unit including the cost of
transportation charges, crew charges and cost
of consumables
Each
BW 1.00
Total - Part C - Market Rate Items
The bidder is required to quote his rates in
figure and words for Part C-Market Rate
items
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 44 Signature of the Bidder
Page 46
Part A - KPWD SR 2014 - 15
POINT WIRING
Point wiring using Copper wire without
switch.
1 2.3 5 Supplying and wiring adopting loop system in
existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible
multistrand FRLS PVC insulated,
2x1.5Sq.mm Cable confirming to the GTP
without switch, the other end of the wires shall
be terminated with sufficient loose length in a
wood/PVC round block complete for each outlet.
GROUP A
a2.3.1 5 Short point up to 3 Mtr from tapping point to out
let via switch box Point 10 144.00 1440.00
b2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from
tapping point to out let via switch box Point 50 215.00 10750.00
c2.3.3 5 Long point above 6 Mtr up to 10 Mtr from
tapping point to out let via switch box Point 75 334.00 25050.00
d2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from
tapping point to out let via switches Point 50 423.00 21150.00
2 3.5 15 Supplying and flush mounting powder coated /
galvanized metal box suitable for mounting
modular switch plates. The box should be firmly
flush mounted after due groove cutting in
Brick/Stone/C.C wall
a 3.5.1 15 1-3 Way Each 90 91.00 8190.00
b 3.5.2 15 4-5 Way Each 40 98.00 3920.00
c 3.5.3 15 6 Way Each 95 121.00 11495.00
d 3.5.4 15 8 Way Each 15 140.00 2100.00
e 3.5.5 16 10-12 Way Each 25 159.00 3975.00
3 3.6 16 Supplying and fixing superior quality modular
switch mounting polycarbonate plate with
necessary supporting back plate with required
nos. of machine screws, bolts nuts etc.,
complete on the existing metal/PVC box.
a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00
b 3.6.2 16 4 Module Each 40 122.00 4880.00
c 3.6.3 16 6 Module Each 95 173.00 16435.00
d 3.6.4 16 8 Module Each 15 200.00 3000.00
e 3.6.6 16 12 Module Each 25 267.00 6675.00
Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE - Electrical Works
Unit Qty Rate Amount SN Item No P.No. Description
RITES Ltd.,
For and on behalf of DTE 45 Signature of the Bidder
Page 47
Unit Qty Rate Amount SN Item No P.No. Description
4 3.7 16 Supplying and fixing of modular switch/
Socket/stepped electronic fan regulator/
dimmer/telephone socket etc on existing
modular switch plate as per IS 3854 and IS
1293
GROUP A
a 3.7.1 16 6 Amps one way. Each 300 63.00 18900.00
b 3.7.3 16 6 Amps 3way socket. Each 180 95.00 17100.00
c 3.7.4 16 Stepped Fan Regulator. Each 52 286.00 14872.00
d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00
e 3.7.9 16 32 Amps DP switch Each 20 164.00 3280.00
f 3.7.10 16 6/16 Amps universal socket Each 20 147.00 2940.00
g 3.7.11 16 TV / Telephone socket Each 10 82.00 820.00
h 3.7.12 16 RJ 45 / I.O. outlet Each 65 204.00 13260.00
5 1.12 3 Supplying and Fixing Metal Fan Box with Round
Hook.
No 52 92 4784
1.2 2 Concealed Conduit System
6 Supplying heavy gauge PVC conduit pipe
……mm dia .......mm thick confirming to IS 2509
with suitable size bends, metal/PVC junction
boxes adhesive paste etc., and running before
concreting the slab. The conduit should be tied
to the reinforcement rods by using binding wires
and unused ways of junction boxes and pipe
ends should be covered using PVC end
enclosures. run with 18SWG GI fish wire
wherever necessary
a 1.2.1 2 19/20 mm dia 2mm thick Mtr 1500 43.00 64500.00
b 1.2.2 2 25 mm dia 2mm thick Mtr 2600 57.00 148200.00
c 1.2.3 2 32 mm dia 2.5mm thick Mtr 300 90.00 27000.00
Groove Cutting
7 1.3 2 Supplying heavy gauge PVC Conduit Pipe -----
dia -- mm thick with suitable size bends, metal
junction boxes adhesive paste etc., by groove
cutting in the wall and fixing by bracing U or J
hooks and cement Plastering up to the wall
surface and run with 18 SWG GI fish wire run
throughout the conduit wherever necessary.
a 1.3.1 2 19/20mm dia 2mm thick Mtr 1100 56.00 61600.00
b 1.3.2 2 25mm dia 2mm thick Mtr 1500 58.00 87000.00
c 1.3.3 2 32mm dia 2.5mm thick Mtr 200 88.00 17600.00
8 1.8 3 Supplying and fixing of PVC casing and capping
on the wall or ceiling using necessary materials
like bends, screws at an interval of 300mm ….
Etc as required.
a 1.8.2 3 25mm Mtr 200 26.00 5200.00
b 1.8.4 3 38mm Mtr 200 39.00 7800.00
c 1.8.5 3 50mm Mtr 200 43.00 8600.00
RITES Ltd.,
For and on behalf of DTE 46 Signature of the Bidder
Page 48
Unit Qty Rate Amount SN Item No P.No. Description
9 2.5 6 Wiring for lighting/power circuit using one of
FRLS PVC insulated 1100v grade, multistrand
Copper with low conductor resistance single
core wire in open or concealed system of wiring
with specified IS-694:1990 & confirming to
GTP of GROUP-A
a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00
b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00
c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00
d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00
e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00
DISTRIBUTION BOARDS
10 6.17 47 Supplying and fixing regular MCB distribution
boards on wall / wood board / flush mounting
using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's
single phase / 3 phase / single door with powder
coated painting. Made out of 14 SWG MS
enclosure.
Double Door
a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00
b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00
11 6.16 47 Supplying and fixing miniature circuit breakers
on existing MCB distribution boards using
necessary fixing materials and 'C' Type curve ,
indicator ON/OFF, energy cross-3 with Short
circuit breaking capacity of 10K and complete
wiring as required confirming to IEC 60898.
a 6.16.1 5-32 Amps SP Each 112 418 46816.00
b 6.16.3 5-32 Amps DP Each 4 849 3396.00
c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00
d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00
12 6.18 47 Supplying, fixing and wiring Earth Leakage
Miniature Circuit Breaker [ELMCB] 240/450V up
to 300mA sensitivity on existing wood/panel
board.
a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00
b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00
13 6.43 50 Supplying and fixing of Metal Socket set of
2pole and earth plugs and socket for
incorporating SP and TP MCB (Without MCB ).
The entire plug and socket shall b mounted in a
Thermoplastic / powder coated metal box &
wired Completely.
A) SP & N
a 6.43.2 b) 20 Amps Each 7 918.00 6426.00
RITES Ltd.,
For and on behalf of DTE 47 Signature of the Bidder
Page 49
Unit Qty Rate Amount SN Item No P.No. Description
SUPPLY OF FITTING
14 4.7 20 Supplying Box Type Suitable for 28 W T5 Single
/ Twin lamp & suspension mounted luminaire &
optical reflector,prewired with HF Electronic
Ballast,push fit type lamp holders & main
connectors. Channel cover shall be made of
CRCA MS Sheet and finishing is done with stove
enamelled white with end caps made of
engineering Plastic.
Group - A
a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00
b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00
15 4.9 20 Supplying Surface mounted type mirror optic
luminaries for single / Twin 28 watts fluorescent
lamps cross rising of stove enameled deep
coloured M.S.low profile housing complete with
all accessories and high purity anodized
aluminium reflector assembling along with cross
louvers including necessary fluorescent tubes
with Energy Saving Electronic Ballast.
a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00
16 4.23 24 Supplying CFL mirror light fitting with 1x11W
CFL lamp, choke, Perspex cover and
completely wired for use on 230V 50Hz AC
supply. Each 4 648.00 2592.00
17 4.17 22 Supplying High pressure Metal halide street
light luminary suitable for use with high
pressure metal halide lamp with integrated
control gear & grey color powder coated. The
fitting shall be non corrosive pressure die cast
aluminum housing with high purity anodized
aluminium reflector with EPDM Gaskets suitable
for Outer Dia of pole 40mm - 60mm. Cable
Entry through a cable gland with toggle clips.
IP65 Protection for both optical & Electrical
Compartment. Bottom cover may be with Poly
carbonate/tempered/ toughened glass.
Luminaire efficiency should be >60 % &
ambient temperature > 35 deg C. High Intensity
Discharge Electro Magnetic Ballast with Copper
winding of Orthocyclic winding coil. Class H
insulated dual coated copper wire. Compliance
to IEC 61347-2-9 Safety & IEC 60923 -
Performance. Winding Temperature for HID
Ballast Tw = 130 deg C & temperature rise ?T =
70 deg C. Luminaire shall be suitable to operate
on 230/250 Volts 50 Hz AC supply finish
including wiring, ignitor, condenser. SS Toggles
for opening front hingeable glass.
RITES Ltd.,
For and on behalf of DTE 48 Signature of the Bidder
Page 50
Unit Qty Rate Amount SN Item No P.No. Description
a 4.17.2 23 150Watts Each 4 6300 25200.00
18 9.3 78 Supplying capacitor type ceiling fan complete
with down rod blades, shackle, canopies etc., for
operation on 230 volts, 50 cycles. Single phase
AC supply conforming to ISS-374-1979 and with
double ball bearing system.
9.3.1 48" Sweep (1200mm)
a 9.3.1.1 78 Regular model Each 52 2376.00 123552.00
19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan
with bracket blades suitable to operate on 230V
50Hz, AC Supply complete.
a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00
20 4.2 20 Supplying and fixing PBBC/Bakelite straight or
slant batten holder and wiring with 60 W / 230
volts lamps.Each 12 88.00 1056.00
21 16.1 104 Supplying and fixing one of 230 volts bell or
buzzer and a flush type bell push with gang box
fixed on necessary wooden or rawl plugs using
NF screws. Each 2 145 290.00
FIXING CHARGES
22.0 17.2 108 Supplying and Fixing........mm dia class A GI
pipe bracket up to 2.7 meters long terminated
with a reducing collar of 40x25mm to which
extra pipe of 175mm length is fixed for fixing
MV/SV/MH/FTL street light fitting of all
capacities on rail/RCC/wall/tubular pole, using
suitable clamps, bolts ,nuts and wiring using
suitable capacity wires etc complete.
a 17.2.2 108 Using 32mm dia G.I.pipe Each 4 1140.00 4560.00
23 17.7 108 Fixing all types and all capacities of fluorescent
/ false ceiling / spot light / CFL / LED fittings
indoor on the wall / ceiling/ rafters / girders
using 23/0.0076” twin twisted PVC insulated
wires, required Nos of round blocks and clamps
a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 121 98.00 11858.00
24 17.8 109 Fixing a ceiling / Wall mounting fan of all
capacities and all types to the existing 'S' hook
with fan regulator to the existing board together
with supplying and fixing 5 amps. ceiling rose,
necessary length of 23 / 0.0076 inch PVC
insulated twin twisted copper wire and wiring.Each 52 139.00 7228.00
RITES Ltd.,
For and on behalf of DTE 49 Signature of the Bidder
Page 51
Unit Qty Rate Amount SN Item No P.No. Description
25 17.12 109 Fixing one exhaust fan in the nitch already left
in the wall with bolts and nuts and 5 amps.
Ceiling rose with sufficient length of 23 / 0.0076
inch PVC insulated twin core wire.Each 10 412 4120.00
26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED
floodlight fitting over existing pole / wall ceiling
including clamps, bolts, nuts and wiring using
suitable capacity wires.Each 4 176.00 704.00
27 11.1 85 Supplying and drawing UTP-CAT 6E LAN
cable. Mt. 1600 23.00 36800.00
28 11.2 85 Supplying and drawing PVC flexible one pair
telephone unarmoured tinned copper cable.
a 11.2.2 85 2 Pair mtr 525 13 6825.00
28 1.4 2 Supplying and fixing sheet metal box made out
of 18 SWG sheet metal with necessary holes for
cable/conduit entry as required with one coat of
primer of approved make etc.
a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00
29 7.4 55 Supplying of 1.1 KV LT UG cable having
aluminium conductor PVC insulated, extruded
inner sheated , galvanized , steel strip (except
2C X 10 Sq.mm wire armoured) confirming to IS
- 3975 : 1990 (No. of strip indicated in GTP) &
extruded PVC outer sheated armoured cable
with specified IS - 1554 Part - 1:1988 &
confirming to GTP of Group - A.
7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00
7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00
30 7.8 61 Labour charges for laying of 1.1 KV class UG
cable in existing trench GI pipe / stoneware pipe
/ on wall / on pole as required.
In existing trench / duct.
7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00
7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00
31 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide
refilling the trench to the required ground level
and consolidating etc., complete. (As per Civil
SR KSRB I - 2, P - 7)
7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00
32 7.10 62 Providing and filling sand in excavated trench
to cover already laid UG cable to adepth of 150
mm all - round the cable.Mtr 110 103.00 11330.00
RITES Ltd.,
For and on behalf of DTE 50 Signature of the Bidder
Page 52
Unit Qty Rate Amount SN Item No P.No. Description
33 7.14 62 Supplying and fixing of heavy duty cable
glands suitable for UG cable of 1.1 KV class
(metal only)
7.14.2 62 25 mm dia Each 4 86.00 344.00
7.14.4 62 45 mm dia Each 2 200.00 400.00
34 7.21 64 Supplying tinned copper lugs and crimping and
wiring to terminal point for wire of the following
sizes.
7.21.6 64 16 sqmm Each 16 11.31 180.96
7.21.12 64 120 sqmm Long Barrel Each 8 196.56 1572.48
EARTHING
35 7.2 55 Supplying fixing and wiring earth electrode for
grounding of lifts, transformers, DG sets etc.
using 40mm dia 2.9mm thick 2.5 mtr long GI
pipe with GI funnel with mesh and suitable size
reducer fixed on the top of the earth electrode.
The funnel should be enclosed in a CC chamber
of 400x400x400mm with a cast iron cover. The
earth electrode shall have staggered holes of
12mm dia and the electrode should be covered
150mm alround with alternate layers of salt and
charcoal from the bottom of the CC chamber.
The connection from the electrode is to be
established through GI strip using GI bolts and
nuts.Each 6 4317.00 25902.00
36 7.3 55 Supplying and running of GI/Copper strips for
grounding connections, using necessary fixing
materials as required.
GI strip
a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00
c 7.3.10 55 600 x 600 x 3 mm copper plate Each 2 7148.00 14296.00
37 7.22 64 Supplying and running GI/Copper conductor
for grounding and (along with other wires in
conduit system of wiring) using necessary
suitable size clamps, nails, guttas/spacers etc.,
Copper Wire.
b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00
RITES Ltd.,
For and on behalf of DTE 51 Signature of the Bidder
Page 53
Unit Qty Rate Amount SN Item No P.No. Description
38 7.12 62 Supplying and fixing of class A (medium duty)
GI pipe of wall thickness not less than 3.25mm
on pole/wall/drain crossing with necessary
clamping arrangements for UG cable of 1.1 KV.
a 7.12.2 62 50mm Mtr 20 391.00 7820.00
b 7.12.5 62 100mm Mtr 15 920.00 13800.00
Part A - KPWD SR Items - Electrical works 1702546.44
Total Quoted Cost of Electrical Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the
above items
Percentage in
figure
(+) / (-) / At par
Percentage in
words
Plus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 52 Signature of the Bidder
Page 54
SN Description of Work Unit Qty Rate Amount
Part B - Market Rate Items
Main Power Panel
1 Main Power Panel
Supply, installation, testing and commissioning of LT
Main Power Panel fabricated out of 16 SWG sheet
steel metal floor mounting type with all normal
practice like derusting, degreasing, phosphating,
powder coated to the approved make as per
specification, comprisiing of the following:-
Incomer
I. 250 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0 - 500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
vi. 250 A 4P Change Over Switch - 1no
Outgoing
i125 A 3P +NL - 1 No
i 63 A 16 KA 3P MCCB - 12 nos.
ii. 40 A 4Pole MCB - 4nos. Nos 1.00
2 Sub MV Panel
Supply, installation, testing and commissioning of LT
Sub MV Panel fabricated out of 16 SWG sheet steel
metal floor mounting type with all normal practice like
derusting, degreasing, phosphating, powder coated
to the approved make as per specification,
comprisiing of the following:-
Incomer
I. 125 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0-500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
Outgoing
iii. 63 A 4Pole 16 KA MCCB - 12 nos.
iii. 40 A 4Pole MCB - 3 nos. Nos 1.00
Part B - Market rate Items - Electrical works
The bidder is required to quote his rates in figure
and words for Part B-Non SR items of Electrical
works
Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE - Electrical Works
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 53 Signature of the Bidder
Page 55
SN DESCRIPTION AMOUNT
Civil Works
1 Part A - KPWD SR Items `
2 Part B - CPWD SR Items `
3 Part C - Market rate Items `
Electrical Works
1 Part A - KPWD SR Items `
2 Part B - Market Rate items `
TOTAL - Schedule III `
TOTAL
(in Words) - Rupees
Construction of Govt. Polytechnic College at Surpur in Yadgir
District for DTE
Abstract - Schedule - III
RITES Ltd.,
For and on behalf of DTE 54 Sugnature of the Bidder
Page 56
Description Unit Qty
P. No l No
Part- A - KPWD SR Items
1 132 18.10 KSRRB M200-7.1: Clearing grass and removal of rubbish
by manual means and stacking outside the periphery of the
area cleaned complete as per specifications. MORTH
Specification No. 201 Ha 0.40 14811.38 5924.55
2 7 2.24 Earth work for lowering and levelling the ground other than
foundation works by mechanical means up to 3.00 depth,
including providing shoring and strutting, removal of
stumps and other deleterious matter, dressing of sides and
bottom, filling back the excavation earth to the extent
required including the cost of labour & HOM of
machineries, as per drawing and technical specification.Cum 715.00 55.54 39711.10
3 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of
buildings, water supply, sanitary lines and electrical
conduits either in pits or in trenches 1.5m and above in
width in Hard soil not exceeding 1.5m in depth, including
dressing the bottom and sides of pits and trenches,
stacking the excavated soil clear from edges of excavation
with lead upto 50 m after breaking of clods complete as per
specifications. Specification No. KBS 2.1 (b)/2.3.5Cum 492.00 258.64 127250.88
4 5 2.5 KSRB 2-2.3: Excavation 1.5m and above in width in soft
rock by blasting for foundation of buildings, water supply,
sanitary lines and electrical conduits either in pits or in
trenches not exceeding 1.5m in depth, stacking the
excavated stuff from edges of excavation with lead upto
50m including cost of labour and HOM of euipment
complete as per specifications. Specification. No KBS
2.1.C/ 2.9.4 / 2.18 / 2.19 Cum 431.00 465.34 200561.54
5 5 2.7 KSRB 2.2.5: Excavation 1.5m and above in width in hard
rock by blasting for foundation of buildings, water supply,
sanitary lines and electrical conduits either in pits or in
trenches 1.5m in depth stacking the excavated stuff clear
from the edge of excavation with lead upto 50m including
cost of labour complete as per specifications. Specification
No. KBS 2.1.D/2.3.4/2.18/2.19 cum 431.00 466.40 201018.40
6 6 2.10 KSRB 2.3 :Filling available excavated earth (excluding
rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited
layer by ramming after watering with lead upto 50 m. and
lift upto 1.5m. Including cost of all labour complete as per
speicifications. Specification No. KBS 2.9 Cum 831.00 115.54 96013.74
AmountRate
Construction of Govt. Polytechnic College at Surpur in Yadgiri District for DTE
Sl No Kalburgi SR -
2014-15
RITES Ltd.,
For and on behalf of DTE 55 Signature of the Bidder
Page 57
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
7 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for
Pre-constructional Anti-Termite Treatment, creating
continuous chemical barrier under and around the column
pits,walls ,trenches,basement excavation,top surface of the
plinth filling, junction of wall and floor, along the external
perimeter of building, expansion joints, over the top surface
of consolidated earth on which apron is to be laid,
surrounding of pipes and conduits, with chloropyriphos
emulsifiable concentrates of 20%concentration, including
cost of chemical, diluting in water to one percent
concentration, labour, HOM of equipments, complete as
per specifications.(Plinth area of the building at ground
floor only shall be measured ) Specification No. KBS 3.2.6
/ 3.2.7Sqm 1275.00 106.00 135150.00
8 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement
concrete of mix 1:4:8 with OPC cement @ 180kgs, with
40mm and down size graded granite metal coarse
aggregates @ 0.85cum and fine aggregates @ 0.57cum
machine mixed, concrete laid in layers not exceeding
15cms, thick, well compacted, in foundation including cost
of all materials, labour, HOM of machinery, curing
complete as per specifications. specification No KBS
4.1,4.2 Cum 186.00 4588.74 853505.64
9 13 4.7 KSRB 4-1.7: Providing and laying in position plain cement
concrete of mix 1:3:6 with OPC cement @220 kgs with
20mm and down size graded granite metal coarse
aggregates @ 0.84 cum and fine aggregates @ 0.56 cum,
machine mixed, concrete laid in layers not exceeding 15
cms, thick, well compacted, in foundation, plinth and cills,
including cost of all materials, labour, HOM of machinery,
curing complete as per specifications. Specification No
KBS 4.1,4.2 Cum 14.00 5062.56 70875.84
10 13 4.12 KSRB 4-2.7: Providing and laying in position reinforced
cement concrete of design mix M 25 with OPC cement @
340 kgs with 20mm and down size graded granite metal
coarse aggregates @ 0.70 cum and fine aggregates @
0.47 cum, with superplastisiser at 3.0 lts. conforming to
IS9103-1999 reaffirmed -2008, machine mixed, concrete
laid in layers not exceeding 15 cms, thick, vibrated for all
works in ground floor level for roof slabs, staircase, lintels,
retaining wals, return walls, walls(any thickness ) including
attached plasters, columns, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed
blocks, anchour blocks, plain windows cills, fillets etc.,
inclduing cost of all materials, labour, HOM of machinery,
curing complete as per specification s. Specification No
KBS 4.1,4.6 cum 715.00 6153.30 4399609.50
11 14 4.20 KSRB 4.2.11 : Providing and laying in position reinforced
cement concrete of design mix M20 with OPC cement @
27.20 kgs with 12 mm and down size graded granite metal
course aggregate @0.05865 cum and fine aggregates @
0.0391 cum, with superplastisiser @ 0.225 lts, machine
mixed, well compacted for plain Chajja of 8.5 cms. average
thickness upto ground floor level, including cost of all
materials, labour, HOM of machinery, finishing , curing,
complete as per specifications. Specification No. 4.1, 4.6Sqm 68.00 490.78 33373.04
RITES Ltd.,
For and on behalf of DTE 56 Signature of the Bidder
Page 58
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
12 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete
including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2Sqm 523.00 223.66 116974.18
13 15 4.28.1 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as roofs, landings, balconies and likes,
thickness up to 200mm including cost of all materials,
labour complete as per specifications upto 3.5m from
ground level , Specification No. KBS 4.6.2Sqm 1196.00 397.50 475410.00
14 15 4.32 KSRB 4-6.5: Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars, post and struts,
square /rectangular / polygon in plan including cost of all
materials, labour complete as per specifications.
Specification No. KBS 4.6.2Sqm 1094.00 345.56 378042.64
15 16 4.34 KSRB 4-6.7: Providing and removing centering, shuttering,
strutting, propping etc., an removal of form work for sides
and soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth including
cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1253.00 243.80 305481.40
16 16 4.37 KSRB 4-6.10: Providing and removing centering,
shuttering, strutting, propping etc., for chajjas, corbels etc.,
including edges including cost of all materials, labour
complete as per specification. Specification No.KBS 4.6.2 Sqm 81.00 253.34 20520.54
17 16 4.38 KSRB 4-6.11 :Providing and removing
centering,shuttering,strutting,propping etc., and removal of
form work for stairs (excluding landing) except spiral
staircase including cost of all materials, labour complete as
per specification. Specification NO. KBS 4.6.2 Sqm 56.00 466.40 26118.40
18 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for
R.C.C work including straightening, cutting, bending,
hooking, placing in position, lapping and / or welding
wherever required, tying with binding wire and anchoring to
the adjoining members wherever necessary complete as
per design (laps, hooks and wastage shall not be
measured and paid) cost of materials, labour, HOM of
machinery complete as per specifications. Specification
No. KBS 4.6.3
4.46.2 For TMT bars Fe 500 Tonne 70.00 73397.58 5137830.60
19 23 5.6 KSRB-5.2-3 : Providing and constructing Granite/ trap/
basalt size stone masonry in foundation with cement
mortar 1:6, stone hammered dressed in courses not less
than 20cms high, bond stones at two m. apart in each
course including cost of materials, labour, curing complete
as per specifications. KBS 5.1.13Cum 297.00 4585.56 1361911.32
RITES Ltd.,
For and on behalf of DTE 57 Signature of the Bidder
Page 59
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
20 23 5.9 KSRB 5.3-3: Providing and constructing granite/trap/
basalt Size stone masonry in basement with cement
mortar 1:6 ,edges of stones chistle dressed in courses not
less than 15cms high, bond stones at two m, apart in each
course including cost of materials, labour, curing complete
as per specifications, KBS 5.1.13Cum 74.00 5651.92 418242.08
21 25 5.27 KSRB 5-14: Providing and constructing precast concrete
solid blocks with compressive strength not less than
35Kg/Sqm with cement mortar 1:4 masonry (quoin, jamb,
closer blocks) with solid concrete blocks of size
40X20X20cms conforming to 1.S: 2185/1965 in
superstructure including cost of materials, labour charges,
scaffolding, curing complete as per specifications.Sqm 2017.00 932.80 1881457.60
22 25 5.28 KSRB 5-15: Providing and constructing non-load bearing
wall with cement concrete solid blocks with compressive
strength not less than 35kg/sqm with cement mortar 1:4
(Jamb, closer blocks) with blocks of size 40X10X20cms.
(lxbxh) conforming to IS 2185/1965 in superstructure
including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Sqm 41.00 672.04 27553.64
23 31 7.1 KSRB 7.1: Providing and fixing in position collapsible
steel shutters with single or double leaf with vertical
channel 20x10x2mm braced with flat iron diagonals
20x5mm size with top and bottom rails of 'T' iron sections
of 40x40x6mm with 38mm dia steel pulleys complete with
bolt and nuts locking arrangements, stoppers, handles on
both sides with 7.5cms openings at 10cms c to c applying
a priming coat of red lead paint . Cost of mateials, labour,
HOM of machinery complete as per specifications. Size of
Gate 2.4m x 1.4m. Specification No.KBS 7.7/7.12. Sqm 15.00 4569.66 68544.90
24 39 7.24.1 c Providing and fixing cold rolled prepainted steel windows
of IS standards, made out of 0.6mm thick deep drawing
quality galvanised on both sides 120gms / sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and
finish painted with a polyester based paint 20 microns
thick. The size of profiles is approximately 46x52mm for
external frames, 46x46mm section for shutters, 46x70mm
section for centre mullion / transom and 18x31mm section
is for fixing glasses. The section should be cut to length
joint mitred and assembling by means of corner brackets
made out of cold rolled annealed strips of 1.2mm thick duly
galvanised and fixed with nickle plated self taping screws.
The shutters are provided with approved quality of fixtures
like handles made out of zamac alloy die cast and powder
coated, receiver made out of glass filled nylon and hinges
made out of CRCA powder coated. 4mm thick glass should
be fixed with EPDM gaskets. The above frames are fixed to
the concrete / masonary walls by means of self expanding
screws.- with 4mm float glass and with guard bars.
Sqm 140.00 4240.00 593600.00
RITES Ltd.,
For and on behalf of DTE 58 Signature of the Bidder
Page 60
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
25 43 7.39 Providing and fixing 304 grade stainless steel hand rails of
14-gauge pipes for Ramps or staircase are made out of
stainless steel hollow pipes using 50mm dia for verticals @
1.60 mtr c/c are fixed to the ramps or steps by drilling with
bolts and 100mm dia MS base plates 10mm guage for
fixing of vertical pipes 4-Nos anchor bolts & 40mm dia
pipes are fixed horizontally for 2 rows top, one pipes are
fixed with vertical pipes another one are fixed with elbows
and 25mm dia pipes are fixed horizontally for 2 rows below
top measure @ equal intervals including cutting, welding,
bending wherever necessary with suitable caps @ tops,
bottoms & corners finishing with mat/shining etc., complete
including cost and conveyance of all materials, labour for
all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other
incidental charges etc., complete as per specification and
directions of Engineer-in-charge of the work. Ramps or
staircase for physically challengedsqm 10.00 6138.46 61384.60
26 47 8.19 Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E.
rain down water pipes 110mm outer dia approved make
and brand with necessary special like shoes, bends, and
offsets fixed with iron clamps, wall plugs, screws, including
cost of materials, labour, complete as per specifications.
m 200.00 609.50 121900.00
27 59 9.93 Providing and fixing factory made single leaft rigid GRP
Sandwich composite door shutter of 32mm thick, laminated
with two GRP skins with wood grain finish, fabricated using
U.V-stabilized Isopathic Gelcoat and on layer of 45 gsm E-
class Chopped strand Mat (CSM), impregnated with
orthopthalic polyster resin. The thickness of the skins shall
not be less than 1.5mm. Expanded Polystyrene (EPS)
structural foam panel of 29mm thickness and a density of
20Kg/m3 shall be used as core mterial. Wooden
reinforcements made of seasoned Salwood block of cross
section not less than 28mmX32mm and also necessary
salwood reinforcements for fixing the metal fittings such as
tower bolts, aldrops, handles etc shall be provided. A
structural adhesive compatible with EPS foam shall be
used for bonding the core material, the salwood
reinforcement and the skins.
The material and process for manufacturing the door
shutters shall confirm to RV/TIFAC composites Design
Centre standards and specifications and the door shutters
tested in confirmation to IS 4020-1994. The finish of shutter
will be plain colour White/Ivory/Beige/Light Grey or any
other colour using high quality pigments. Excluding cost of
fixtures and inclusive of supply of shutters to respective
work spot.Sqm 12.00 3392.00 40704.00
RITES Ltd.,
For and on behalf of DTE 59 Signature of the Bidder
Page 61
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
28 60 9.96 Providing and fixing 65mm X 125mm GRP Door frame
fabricated using E-Glass Chopped Strand Mat (CSM) U.V -
sablized Isopathlic Gelcoat and Isopthalic resin. The
thickness of the GRP Skin shall not be less than 2.0mm.
The door frame consists of four segments, which are
provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined
together by means of screws. The GRP frame shall be
provided with wooden reinforcement on 6 locations for high
screw holding capacity for fixing metalling hold fast and
shall be consolidated by filling with medium density
foam/plaster of paris with fibre reinforcement. Six numbers
of 260mmX25mmX5mm size S shaped M.S. flat hold fast
shall be provided with the frame. m 35.00 598.90 20961.50
29 85 12.116 Providing and fixing to wall, ceiling and floor unplaticised
PVC 6.00 kgs/sqcm working pressure with pipe fittings,
wall clips etc and making good the wall, ceiling and floor for
sanitary pipelines including cost of all materials, labour
charges, HOM of acquirements and testing complete as
per specifications.
12.116.1 -do-110mm dia m 100.00 431.42 43142.00
12.116.2 -do-140mm dia m 150.00 700.66 105099.00
30 68 11.37 KSRB 12-5.1: Construction brick masonry circular type
man hole 0.91m internal diameter at bottom 0.91m and
0.56mt dia at top with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 grade desination) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4Nos 2.00 12502.70 25005.40
31 69 11.38 KSRB 12-5.2: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 1.67m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 frade designation) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4Nos 1.00 19224.16 19224.16
RITES Ltd.,
For and on behalf of DTE 60 Signature of the Bidder
Page 62
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
32 69 11.40 KSRB 12-5.4: Construction brick masonry circular type
manhole1.22m internal diameter at bottom 2.29m and
0.56m dia at topp with table moulded non modular bricks of
class designation 50 in cement mortar 1:4, inside cement
plastered 12mm thick with cement motar 1:3, finished with
floating coat of neat cement , foundation concrete of 1:3:6
mix using 40mm and down size granite metal and making
neccessary channel in cement concrete 1:2:4 with 20mm
and down size granite metal finished with floating coat of of
neat cement wit SFRC cover and frame (heavy duty, HD-
20 frade designation) 560mm internal diameter confirming
to IS 12592, total weight cover and frame to be not less
than 182 Kg fixed in cement concrete 1:2:4 20mm and
down size broken granite metal providing and removing
centering shuttering including cost of material , labour
charges HOM of machineries complete as per specification
NO KBS12.4Nos 1.00 28533.08 28533.08
33 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection
chamber 455x610mm, and 450mm depth. (clear inside
dimension) for single pipeline, using table moulded non-
modular bricks of class designation 50 in cement mortar
1:5, C.I cover with frame (light duty) 455x610mm internal
dimensions. total weight of cover with frame to be not less
than 38 kg (weight of cover 23kg and weight of frame 15
kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm
and downsize granite metal, foundation concrete 1:5:10
with 40mm and downsize granite metal inside plastering
12mm thick with cement mortar 1:3, finish smooth with a
floating coat of cement on walls and bed concrete
complete as per standard design including cost of
materials, labour charges, curing complete as per
specifications.Nos 2.00 6472.36 12944.72
34 71 11.52 KSRB 12-8.2: Construction brick masonry inspection
chamber 500x700mm and 450mm depth (clear inside
dimension) for pipeline with one or two inlets, using table
moulded non modular bricks of class designation 50 in
cement mortar 1:5 , CI cover with frame ( light duty)
455x610mm internal dimension, total weight of cover with
frame to be not less than 38Kg (weight of cover 23kg and
weight of frame 15kg) RCC top slab with cement concrete
1:2:4 mix 20mm and downsize granite metal, foundation
concrete 1:5:10 with 40mm and downsize granite metal
inside plastering 12mm thick with cement mortar 1:3
finished smooth with floating coat of cement on walls and
bed concrete complete as per standard design including
cost of materials, labour charges, curing complete as per
specifications. Each 1.00 7342.62 7342.62
35 74 12.1 KSRB 11.1 : Providing and fixing white vitreous chine clay
water closet Indian type (Sqatting pan) of size 580mm
with foot rests, 100mm S or P tarp, 10 litres low level, PVC
flushing cistren (all are approved make) with fittings, CI
/MS brackets, 32mm dia flush pipe fittings and clamps,
overflow arrangements with special and 25mm mosquito
proof coupling of approved design, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. KBS 11. Pan 4.00 3612.48 14449.92
RITES Ltd.,
For and on behalf of DTE 61 Signature of the Bidder
Page 63
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
36 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay
water closet European type (pedestrial type, P trap) with
black solid plastic sheet and lead cover, CP brass hinges,
rubber buffer 10 litres low level PVC flushing chintrens with
fittings CI / MS bracket 50 mm dia meter flush bend with
fitting and clapms over flow arrangements with special and
25 mm mosquitto proof coupling of approved design and
painting of fitting and brackets cutting and making good the
wall & floor required including cost of material etc.
complete as per specification no. 11. Each 4.00 5238.52 20954.08
37 75 12.11 KSRB.11.8.1: Providing and fixing white vitreousss china
clay wall corner type lipt front Urinal basin of size
340x410x265mm with 5 litres PVC automatic flushing
cistern, CI/MS brackets standar flush pipe and cp brass
speraders with brass union and GI clamps complete
painting of fitting and brackets cutting and making the good
wall and floor wherever required inlcuding cost material
labour complete as per specification No. KSB 11.unit 4.00 2896.98 11587.92
38 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china
clay,flat back wash basin size 550X400mm with a single
15mm CP brass pillar tap with CI / MS brackets, 32mm CP
brass waste of standard pattern, painting of fittings and
brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour
complete as per specifications. No. KBS 11 unit 10.00 2846.10 28461.00
39 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratoru sink of
white glazed fire clay of size 600x450x200mm with M.S /
C.I brackets , C.P brass chain with rubber plug, 32mm C.P
brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of
materials, labour complete as per specifications. KBS11unit 4.00 3422.74 13690.96
40 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm
bevellead edge mirror of superior glass with 6mm hard
board backing and fixed to wooden cleat with CP Screws,
washers, including cost of materials, labour complete as
per specification.unit 4.00 1302.74 5210.96
41 85 12.112.2 Providing stoneware gully trap of approved quality and
make fixing in CC1:2:4 and plastering with CM1:3 wherever
necessary. (Rate includes cost of all materials, fixtures and
lead) 15x10cms Each 15.00 265.00 3975.00
42 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make
confirming to ISI specification and construction of cistern
in M-15 as per direction (Rate is inclusive of cost of
materials and fixtures and conveyance of materials to work
spot) 10x7.5cmsEach 30.00 233.20 6996.00
RITES Ltd.,
For and on behalf of DTE 62 Signature of the Bidder
Page 64
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
43 87 13.1 KSRB 13-1.1: Providing and fixing to wall, ceiling and floor
galvanised/mild steel tube 15mm dia nominal bore with
fittings (medium grade weight 1.27kg/mtr) B class including
cost of all materials, labour charges, HOM of equipments
and tetsing complete as per specifications. Specification
No. KBS 13.2.14/13.8
13.1 15mm dia m 50.00 189.74 9487.00
13.2 20mm dia m 75.00 231.08 17331.00
13.3 25mm dia m 100.00 316.94 31694.00
13.4 32mm dia m 100.00 362.52 36252.00
13.5 40mm dia m 50.00 450.50 22525.00
13.6 50mm dia m 150.00 526.82 79023.00
44 87 13.14 KSRB 13-3.5: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 40mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6m 50.00 397.50 19875.00
45 87 13.15 KSRB 13-3.6: Providing and fixing in trenches
galvanised/mild steel tubes (medium grade) 50mm dia
nominal bore with all fittings (earth work in trenches to be
measured and paid for seperately) including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.6m 100.00 455.80 45580.00
46 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib
cock of approved quality 15mm nominal bore including
cost of all materials, labour and HOM of equipments with
all leads complete as per specifications. Specification No.
KBS 13.2.2/13.3 Each 15.00 231.08 3466.20
47 88 13.24 KSRB 13-6.1-2 Providing and fixing in position brass bib
cock of approved quality 20mm dia nominal bore including
cost of all materials, labour and HOM of equipments with
all leads complete as per specifications. Specification
No.KBS 13.2.2/13.3Each 15.00 255.46 3831.90
48 88 13.27 KSRB 13-6.2-2: Providing and fixing in position brass stop
cock of approved quality 20mm nominal bore inlcuding
cost of all materials labour and HOM equipment with all
leads complete as per specification. KBS 13.2.2 /13.3Each 15.00 169.60 2544.00
49 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
25mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 10.00 614.80 6148.00
50 89 13.36 KSRB 13.6.3.5 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
40mm dia 25 mm nominal bore including cost of all
materials labour HOM of equipment with all leads complete
as per specification No. KBS 13.2.6 / 13.3 Each 4.00 1328.18 5312.72
RITES Ltd.,
For and on behalf of DTE 63 Signature of the Bidder
Page 65
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
51 91 13.78 KSRB 13-11.1: Providing and placing on terrace,
polyethylene water storage tanks with man hole lid and
suitable locking arrangements, making holes of suitable
diameter for inlet, outlet and over flow pipes, including cost
of all materials, labour, transport charges, HOM of
equipments and testing complete as per specifications (for
1000 litre capacity). Specification No. KBS 13.22Nos 4.00 8831.92 35327.68
52 98 14.8 KSRB 14.7-1: Providing and laying flooring with 1:2:4
cement concrete 40mm thick using broken granite metal of
20mm and down size laid to line and level in one layer and
finished with floating coat of neat cement including cost of
materials, labour, curing complete as per specifications.
Specification No. KBS 14.3Sqm 16.00 310.58 4969.28
53 103 14.36.2 KSRB 14.14-5: Providing ceramic tiles of size 30x30cms
of approved make, shade and size for flooring, treads of
steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix flush pointing with white cement using
colour pigment, including cost of materials, labour, curing,
complete as per specifications. Specifications No.KBS
Sqm 43.00 1066.36 45853.48
54 103 14.40 KSRB 14-17.1: Providing skirting, dado, rises of steps
with white glazed tiles 6mm thick on 10mm thick cement
plaster 1:3 and jointed with white cement slurry over rough
plaster surface (exculding cost of rough plastered surface
which should be measured and paid separetly) using
glazed tiles of approved make and size including cost of
labour ,materials complete as per specifications.
Specification No KBS 14.16,14.17. Sqm 66.00 1044.10 68910.60
55 104 14.45 Providing vitrified tiles 60cms x 60 cms size of approved
make, shade and size for flooring laid on a bed of 12mm
thick cement motar 1:3 mix, flush pointing with white
cement using coloured pigment , including cost of
materials, labour curing etc complete as per specification.Sqm 867.00 1099.22 953023.74
56 106 14.61 Providing and fixing 20mm thick gang saw water cut
sadarhalli grey granite in CM 1:4 proportion, cut to required
shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant,
grooves in joints including cost of curing.
14.61.2 minimum width of 900 mm Sqm 392.00 2008.70 787410.40
57 109 15.6 KSRB 15.1.5 Providing raised and cut pointing to coursed
stone masonry with cement mortar 1:4 20mm after raking
joints to depth of 20mm nicely lining, including cost of
materials, labour, curing complete as per specifications. Sqm 225.00 127.20 28620.00
RITES Ltd.,
For and on behalf of DTE 64 Signature of the Bidder
Page 66
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
58 110 15.16 KSRB 15-3.8 Providing 18 mm thick cement plaster in
single coat with Cement Mortar 1:4 to brick masonry
including rounding off corners wherever required smooth
rendering . Providing and removing scaffolding including
cost of all materials, labour,curing complete as per
specifications .Sqm 2314.00 201.40 466039.60
59 110 15.19 KSRB 15-3.11: Providing 20 mm thick cement plaster in
single coat with Cement Mortar 1:4 to stone masonry &
concrete surface including rounding off corners wherever
required smooth rendering . Providing and removing
scaffolding including cost of all materials, labour,curing
complete as per specifications .Sqm 1769.00 213.06 376903.14
60 110 15.21 KSRB 15-3.13 : Providing 12mm thick Cement plaster in
single coat with cement mortar 1:3 to Ceiling including
rounding of corners wherever required smooth rendering:
providing and removing, Scaffolding including cost of
materials, labour, curing complete as per specifications.Sqm 1200.00 177.02 212424.00
61 110 15.30 KSRB 15-5.1: Providing rough cement plastering 15mm
thick in single coat with cement mortar 1:4, to brick
masonry for base of dadooing works with sand of approved
quality, providing and removing scaffolding, including cost
of materials, labour, curing complete as per specifications.
Sqm 66.00 161.12 10633.92
62 111 15.33 KSRB 15.7 - Providing lime rendering for plastering to wall
and ceiling including cost of materials, labour, curing
complete as per specifications. Sqm 3514.00 20.67 72634.38
63 111 15.36 KSRB 15.8.1 Providing and fixing plaster mesh 200mm
wide manufactured out of hot dipped galvanized iron of
nominal thcikness 0.35mm with a zinc coating of 120gms
per sqm width, along route of walls chipped for services,
junction between RCC and brick walls including cost of
materials, labour for fixing complete as per specifications
(length of mesh only be measured for payment).m 250.00 45.41 11352.50
64 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two
coats with primer, Plastic Emulsion paint of approved
brand on wall surface to give an even approved shade
after throughly brushing the surface, free from mortar drops
and other foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour,
complete as per the specifications. Sqm 3514.00 84.80 297987.20
65 113 15.51.3 KSRB 15-15.2 : Extra over Item no 15.15.1for painting two
coats with Plastic Emulsion paint of approved brand and
shade on Ceiling complete as per the specifications.Sqm 1200.00 2.89 3468.00
RITES Ltd.,
For and on behalf of DTE 65 Signature of the Bidder
Page 67
Description Unit Qty
P. No l No
AmountRateSl No Kalburgi SR -
2014-15
66 117 15.74 KSRB 15-18.2 Providing and applying enamel metal paint
two coats (exculding priming coat) over new steel or other
metal surface brushing to give an even shade after
cleaning oil, grease, dirt and other foreign matters including
cost of materials, labour, complete as per specifications.Sqm 60.00 80.56 4833.60
TOTAL - Part A - KPWD SR Items 21229709.79
Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 (Kalburgi Circle) to be indicated for the above items
Percentage in
figure
(+) / (-) / At par
Percentage in
words
Plus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 66 Signature of the Bidder
Page 68
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Part B - CPWD SR items
1 72 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including disposal of excavated earth, lead upto
50 m and lift upto 1.5 m, disposed earth to be levelled and neatly
dressed.
2.7.1 Ordinary rock cum 894.00 244.60 218672.40
2.7.2 Hard rock (requiring blasting) cum 894.00 418.15 373826.10
2 87 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1
cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)
over 75mm thick bed of dry brick ballast 40mm nominal size, well
rammed and consolidated and grouted with fine sand, including
finishing the top smooth.Sqm 180.00 419.30 75474.00
1 147 9.20 Providing and fixing ISI marked flush door shutters confirming to IS
2202 (Part I), decorative type, core of block board construction with
frame of First class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35mm thick including ISI marked stainless steel butt hinges with
necessary screws. Sqm 52.00 2606.45 135535.40
2 174 10.14 Providing and fixing pressed steel door frames confirming to IS: 4351
manufactured from commercial mild steel sheet of 1.60mm thickness
including hinges jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50 x 25mm, or base ties of 1.60mm
pressed mild steel welded or rigidly fixed together by mechanical
means, adjustable lugs with split end tail to each jamb including M S
pressed butt hinges 2.5mm thick with mortar guards, lock strike plate
and shock absorrbers as specified and applying a coat of approved
steel primer after pre-treatment of the surface as directed by Engineer-
in-charge
10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb.
Ground floor metre 150.00 377.70 56655.00
3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent
or dyed to required colour or shade with nuts and screws etc. complete.
9.96.2 250X16mm
Ground floor Each 15.00 189.00 2835.00
4 156 9.97 Providing and Fixing Aluminium tower bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent
or dyed to required colour and shade with necessary screws etc.
complete.
9.97.2 250X 10mm
Ground floor Each 15.00 95.25 1428.75
5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete.
9.100.1 125mm
Ground floor Each 30.00 69.80 2094.00
6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI marked
anodisied (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary screws
etc. complete.
Construction of Govt. Polytechnic College at Surpur in Yadgiri District for DTE
Ref. DSR 2014
RITES Ltd.,
For and on behalf of DTE 67 Signature of the Bidder
Page 69
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Ref. DSR 2014
9.101.1 Single rubber stopper
Ground floor Each 15.00 37.50 562.50
7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with silicone
additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10sqm)
Sqm 1,769.00 94.95 167966.55
8 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 2.00 18309.50 36619.00
9 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC
pipes including collars/spigot jointed with stiff mixture of cement mortar
in the proportion of 1:2( 1 cement : 2 fine sand) including testing of
joints etc complete
19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00
10 381 24.10 Supplying, assembling, lowering and fixing in vertical position in bore
well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and
socketed/ plain ended casing pipes of required dia, conforming to IS:
4270, of reputed & approved make, including painted with outside
surface with two coats of anticorrosive paint of approved brand and
manufacture, including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of Engineer-in-
charge.
24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mm metre 60.00 1335.40 80124.00
Part B - CPWD SR Items 1170997.70
Add cost index for Bellary @ 13.33% 156093.99
Part B - CPWD SR Items 1327091.69
Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted
Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items
Percentage in
figure(+) / (-) / At par
Percentage in
wordsPlus / Minus / At par
Amount in
Figure
(Rupees)
Amount in
Words
(Rupees)
RITES Ltd.,
For and on behalf of DTE 68 Signature of the Bidder
Page 70
SN Description Unit Qty Rate Amount
Part- C Market Rate Items
1 Filling New approved Excavated
earth/moorum in sides of foundation upto
plinth in layers not exceeding 20cm in depth
compacting each deposited layer by ramming
after watering with a lead upto 5km and lift upto
3m including cost of all labour complete as per
the direction of engineer incharge.Cum 1057.00
2 Providing grooves in plastering on walls 2.50 to
4.00cms wide and to the required depth as per
design and finished in cement mortar (1:3)
including curing etc., complete.
Ground floor Rmt 200.00
EXTERNAL WATER SUPPLY
3 Geophysical investigation of site for sinking
borewell for supplying drinking water to the
habitation either through hand pump, MWS or
PWSS by vertical electrical sounding by
adopting Venner or Schlumberger's method,
including reconnaissance survey of Geological
formation, geophysical investigation of existing
ground water in the vicinity indicating the
location of site, recommended depth of casing
pipe required to seal the top unconsolidated
formation including an extra depth of 1m in
consolidated formation for proper seating of
casing pipe, depth of drilling required to cover
full depth of aquifer proposed to be tapped,
probable yield and other information required
including transportation of instrument and
accessories to work site, engaging technical
personnel and labour required etc., Each
BW 1.00
4 Sinking Bore Well of 150mm dia clear using
super fast hydraulic rig of capacity 250 PSIG &
above 900 CMF & above in all strata including
over burden upto 20mtrs fixing of casing pipes,
collars and cap with necessary cutting,
threading and welding including transportation
of rig and supporting vehicle, crew charges and
cost of consumables etc., complete including
yield testing at the final depth with a minimum
working of compressor for one hour (excluding
cost of casing pipes, collars, cap etc.)
0- 50 mtrs RMtr 50.00
Construction of Govt. Polytechnic College at Surpur in Yadgiri District for DTE
RITES Ltd.,
For and on behalf of DTE 69 Signature of the Bidder
Page 71
SN Description Unit Qty Rate Amount
50- 100 mtrs RMtr 50.00
100- 150 mtrs RMtr 50.00
5 Supply, delivery, installation, testing,
commissioning of vertical centrifugal
submersible pump of 6.5HP capable of
pumping 335 lpm against an approximate total
head of 40m from all causes, including
providing 4Cx4sqmm 440V flat core double
sheathed waterproof submersible cable, Star
Delta starter, control panel with dry run
preventer, overload protection and backup
protection and capacitor as required, installed
inside a weather proof kiosk with locking
arrangement of approved design near the
borewell, including making necessary electrical
connections from mains to the starter panel
and from starter panel to the pump. Including
providing and fixing gun metal gate valve and
non-return valve of 50mm n.b on the delivery
side of the pump. Submersible pumps may be
of Atlanta/ KSB/ Kirloskar/ CALAMA/ Suguna
makes.Each 1.00
6 Yield testing of Borewell at Final depth with a
minimum of 10 hours continuously with the
help of pump testing unit including the cost of
transportation charges, crew charges and cost
of consumables Each
BW 1.00
Total - Part C - Market Rate Items
The bidder is required to quote his rates in
figure and words for Part C-Market Rate
items
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 70 Signature of the Bidder
Page 72
Part A - KPWD SR 2014 - 15
POINT WIRING
Point wiring using Copper wire without
switch.
1 2.3 5 Supplying and wiring adopting loop system in
existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible
multistrand FRLS PVC insulated,
2x1.5Sq.mm Cable confirming to the GTP
without switch, the other end of the wires shall
be terminated with sufficient loose length in a
wood/PVC round block complete for each outlet.
GROUP A
a2.3.1 5 Short point up to 3 Mtr from tapping point to out
let via switch box Point 10 144.00 1440.00
b2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from
tapping point to out let via switch box Point 50 215.00 10750.00
c2.3.3 5 Long point above 6 Mtr up to 10 Mtr from
tapping point to out let via switch box Point 75 334.00 25050.00
d2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from
tapping point to out let via switches Point 50 423.00 21150.00
2 3.5 15 Supplying and flush mounting powder coated /
galvanized metal box suitable for mounting
modular switch plates. The box should be firmly
flush mounted after due groove cutting in
Brick/Stone/C.C wall
a 3.5.1 15 1-3 Way Each 90 91.00 8190.00
b 3.5.2 15 4-5 Way Each 40 98.00 3920.00
c 3.5.3 15 6 Way Each 95 121.00 11495.00
d 3.5.4 15 8 Way Each 15 140.00 2100.00
e 3.5.5 16 10-12 Way Each 25 159.00 3975.00
3 3.6 16 Supplying and fixing superior quality modular
switch mounting polycarbonate plate with
necessary supporting back plate with required
nos. of machine screws, bolts nuts etc.,
complete on the existing metal/PVC box.
a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00
b 3.6.2 16 4 Module Each 40 122.00 4880.00
c 3.6.3 16 6 Module Each 95 173.00 16435.00
d 3.6.4 16 8 Module Each 15 200.00 3000.00
e 3.6.6 16 12 Module Each 25 267.00 6675.00
Construction of Govt. Polytechnic College at Surpur in Yadgir District for DTE - Electrical Works
Unit Qty Rate Amount SN Item No P.No. Description
RITES Ltd.,
For and on behalf of DTE 71 Signature of the Bidder
Page 73
Unit Qty Rate Amount SN Item No P.No. Description
4 3.7 16 Supplying and fixing of modular switch/
Socket/stepped electronic fan regulator/
dimmer/telephone socket etc on existing
modular switch plate as per IS 3854 and IS
1293
GROUP A
a 3.7.1 16 6 Amps one way. Each 300 63.00 18900.00
b 3.7.3 16 6 Amps 3way socket. Each 180 95.00 17100.00
c 3.7.4 16 Stepped Fan Regulator. Each 52 286.00 14872.00
d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00
e 3.7.9 16 32 Amps DP switch Each 20 164.00 3280.00
f 3.7.10 16 6/16 Amps universal socket Each 20 147.00 2940.00
g 3.7.11 16 TV / Telephone socket Each 10 82.00 820.00
h 3.7.12 16 RJ 45 / I.O. outlet Each 65 204.00 13260.00
5 1.12 3 Supplying and Fixing Metal Fan Box with Round
Hook.
No 52 92 4784
1.2 2 Concealed Conduit System
6 Supplying heavy gauge PVC conduit pipe
……mm dia .......mm thick confirming to IS 2509
with suitable size bends, metal/PVC junction
boxes adhesive paste etc., and running before
concreting the slab. The conduit should be tied
to the reinforcement rods by using binding wires
and unused ways of junction boxes and pipe
ends should be covered using PVC end
enclosures. run with 18SWG GI fish wire
wherever necessary
a 1.2.1 2 19/20 mm dia 2mm thick Mtr 1500 43.00 64500.00
b 1.2.2 2 25 mm dia 2mm thick Mtr 2600 57.00 148200.00
c 1.2.3 2 32 mm dia 2.5mm thick Mtr 300 90.00 27000.00
Groove Cutting
7 1.3 2 Supplying heavy gauge PVC Conduit Pipe -----
dia -- mm thick with suitable size bends, metal
junction boxes adhesive paste etc., by groove
cutting in the wall and fixing by bracing U or J
hooks and cement Plastering up to the wall
surface and run with 18 SWG GI fish wire run
throughout the conduit wherever necessary.
a 1.3.1 2 19/20mm dia 2mm thick Mtr 1100 56.00 61600.00
b 1.3.2 2 25mm dia 2mm thick Mtr 1500 58.00 87000.00
c 1.3.3 2 32mm dia 2.5mm thick Mtr 200 88.00 17600.00
8 1.8 3 Supplying and fixing of PVC casing and capping
on the wall or ceiling using necessary materials
like bends, screws at an interval of 300mm ….
Etc as required.
a 1.8.2 3 25mm Mtr 200 26.00 5200.00
b 1.8.4 3 38mm Mtr 200 39.00 7800.00
c 1.8.5 3 50mm Mtr 200 43.00 8600.00
RITES Ltd.,
For and on behalf of DTE 72 Signature of the Bidder
Page 74
Unit Qty Rate Amount SN Item No P.No. Description
9 2.5 6 Wiring for lighting/power circuit using one of
FRLS PVC insulated 1100v grade, multistrand
Copper with low conductor resistance single
core wire in open or concealed system of wiring
with specified IS-694:1990 & confirming to
GTP of GROUP-A
a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00
b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00
c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00
d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00
e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00
DISTRIBUTION BOARDS
10 6.17 47 Supplying and fixing regular MCB distribution
boards on wall / wood board / flush mounting
using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's
single phase / 3 phase / single door with powder
coated painting. Made out of 14 SWG MS
enclosure.
Double Door
a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00
b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00
11 6.16 47 Supplying and fixing miniature circuit breakers
on existing MCB distribution boards using
necessary fixing materials and 'C' Type curve ,
indicator ON/OFF, energy cross-3 with Short
circuit breaking capacity of 10K and complete
wiring as required confirming to IEC 60898.
a 6.16.1 5-32 Amps SP Each 112 418 46816.00
b 6.16.3 5-32 Amps DP Each 4 849 3396.00
c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00
d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00
12 6.18 47 Supplying, fixing and wiring Earth Leakage
Miniature Circuit Breaker [ELMCB] 240/450V up
to 300mA sensitivity on existing wood/panel
board.
a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00
b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00
13 6.43 50 Supplying and fixing of Metal Socket set of
2pole and earth plugs and socket for
incorporating SP and TP MCB (Without MCB ).
The entire plug and socket shall b mounted in a
Thermoplastic / powder coated metal box &
wired Completely.
A) SP & N
a 6.43.2 b) 20 Amps Each 7 918.00 6426.00
RITES Ltd.,
For and on behalf of DTE 73 Signature of the Bidder
Page 75
Unit Qty Rate Amount SN Item No P.No. Description
SUPPLY OF FITTING
14 4.7 20 Supplying Box Type Suitable for 28 W T5 Single
/ Twin lamp & suspension mounted luminaire &
optical reflector,prewired with HF Electronic
Ballast,push fit type lamp holders & main
connectors. Channel cover shall be made of
CRCA MS Sheet and finishing is done with stove
enamelled white with end caps made of
engineering Plastic.
Group - A
a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00
b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00
15 4.9 20 Supplying Surface mounted type mirror optic
luminaries for single / Twin 28 watts fluorescent
lamps cross rising of stove enameled deep
coloured M.S.low profile housing complete with
all accessories and high purity anodized
aluminium reflector assembling along with cross
louvers including necessary fluorescent tubes
with Energy Saving Electronic Ballast.
a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00
16 4.23 24 Supplying CFL mirror light fitting with 1x11W
CFL lamp, choke, Perspex cover and
completely wired for use on 230V 50Hz AC
supply. Each 4 648.00 2592.00
17 4.17 22 Supplying High pressure Metal halide street
light luminary suitable for use with high
pressure metal halide lamp with integrated
control gear & grey color powder coated. The
fitting shall be non corrosive pressure die cast
aluminum housing with high purity anodized
aluminium reflector with EPDM Gaskets suitable
for Outer Dia of pole 40mm - 60mm. Cable
Entry through a cable gland with toggle clips.
IP65 Protection for both optical & Electrical
Compartment. Bottom cover may be with Poly
carbonate/tempered/ toughened glass.
Luminaire efficiency should be >60 % &
ambient temperature > 35 deg C. High Intensity
Discharge Electro Magnetic Ballast with Copper
winding of Orthocyclic winding coil. Class H
insulated dual coated copper wire. Compliance
to IEC 61347-2-9 Safety & IEC 60923 -
Performance. Winding Temperature for HID
Ballast Tw = 130 deg C & temperature rise ?T =
70 deg C. Luminaire shall be suitable to operate
on 230/250 Volts 50 Hz AC supply finish
including wiring, ignitor, condenser. SS Toggles
for opening front hingeable glass.
RITES Ltd.,
For and on behalf of DTE 74 Signature of the Bidder
Page 76
Unit Qty Rate Amount SN Item No P.No. Description
a 4.17.2 23 150Watts Each 4 6300 25200.00
18 9.3 78 Supplying capacitor type ceiling fan complete
with down rod blades, shackle, canopies etc., for
operation on 230 volts, 50 cycles. Single phase
AC supply conforming to ISS-374-1979 and with
double ball bearing system.
9.3.1 48" Sweep (1200mm)
a 9.3.1.1 78 Regular model Each 52 2376.00 123552.00
19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan
with bracket blades suitable to operate on 230V
50Hz, AC Supply complete.
a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00
20 4.2 20 Supplying and fixing PBBC/Bakelite straight or
slant batten holder and wiring with 60 W / 230
volts lamps.Each 12 88.00 1056.00
21 16.1 104 Supplying and fixing one of 230 volts bell or
buzzer and a flush type bell push with gang box
fixed on necessary wooden or rawl plugs using
NF screws. Each 2 145 290.00
FIXING CHARGES
22.0 17.2 108 Supplying and Fixing........mm dia class A GI
pipe bracket up to 2.7 meters long terminated
with a reducing collar of 40x25mm to which
extra pipe of 175mm length is fixed for fixing
MV/SV/MH/FTL street light fitting of all
capacities on rail/RCC/wall/tubular pole, using
suitable clamps, bolts ,nuts and wiring using
suitable capacity wires etc complete.
a 17.2.2 108 Using 32mm dia G.I.pipe Each 4 1140.00 4560.00
23 17.7 108 Fixing all types and all capacities of fluorescent
/ false ceiling / spot light / CFL / LED fittings
indoor on the wall / ceiling/ rafters / girders
using 23/0.0076” twin twisted PVC insulated
wires, required Nos of round blocks and clamps
a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 121 98.00 11858.00
24 17.8 109 Fixing a ceiling / Wall mounting fan of all
capacities and all types to the existing 'S' hook
with fan regulator to the existing board together
with supplying and fixing 5 amps. ceiling rose,
necessary length of 23 / 0.0076 inch PVC
insulated twin twisted copper wire and wiring.Each 52 139.00 7228.00
RITES Ltd.,
For and on behalf of DTE 75 Signature of the Bidder
Page 77
Unit Qty Rate Amount SN Item No P.No. Description
25 17.12 109 Fixing one exhaust fan in the nitch already left
in the wall with bolts and nuts and 5 amps.
Ceiling rose with sufficient length of 23 / 0.0076
inch PVC insulated twin core wire.Each 10 412 4120.00
26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED
floodlight fitting over existing pole / wall ceiling
including clamps, bolts, nuts and wiring using
suitable capacity wires.Each 4 176.00 704.00
27 11.1 85 Supplying and drawing UTP-CAT 6E LAN
cable. Mt. 1600 23.00 36800.00
28 11.2 85 Supplying and drawing PVC flexible one pair
telephone unarmoured tinned copper cable.
a 11.2.2 85 2 Pair mtr 525 13 6825.00
28 1.4 2 Supplying and fixing sheet metal box made out
of 18 SWG sheet metal with necessary holes for
cable/conduit entry as required with one coat of
primer of approved make etc.
a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00
29 7.4 55 Supplying of 1.1 KV LT UG cable having
aluminium conductor PVC insulated, extruded
inner sheated , galvanized , steel strip (except
2C X 10 Sq.mm wire armoured) confirming to IS
- 3975 : 1990 (No. of strip indicated in GTP) &
extruded PVC outer sheated armoured cable
with specified IS - 1554 Part - 1:1988 &
confirming to GTP of Group - A.
7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00
7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00
30 7.8 61 Labour charges for laying of 1.1 KV class UG
cable in existing trench GI pipe / stoneware pipe
/ on wall / on pole as required.
In existing trench / duct.
7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00
7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00
31 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide
refilling the trench to the required ground level
and consolidating etc., complete. (As per Civil
SR KSRB I - 2, P - 7)
7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00
32 7.10 62 Providing and filling sand in excavated trench
to cover already laid UG cable to adepth of 150
mm all - round the cable.Mtr 110 103.00 11330.00
RITES Ltd.,
For and on behalf of DTE 76 Signature of the Bidder
Page 78
Unit Qty Rate Amount SN Item No P.No. Description
33 7.14 62 Supplying and fixing of heavy duty cable
glands suitable for UG cable of 1.1 KV class
(metal only)
7.14.2 62 25 mm dia Each 4 86.00 344.00
7.14.4 62 45 mm dia Each 2 200.00 400.00
34 7.21 64 Supplying tinned copper lugs and crimping and
wiring to terminal point for wire of the following
sizes.
7.21.6 64 16 sqmm Each 16 11.31 180.96
7.21.12 64 120 sqmm Long Barrel Each 8 196.56 1572.48
EARTHING
35 7.2 55 Supplying fixing and wiring earth electrode for
grounding of lifts, transformers, DG sets etc.
using 40mm dia 2.9mm thick 2.5 mtr long GI
pipe with GI funnel with mesh and suitable size
reducer fixed on the top of the earth electrode.
The funnel should be enclosed in a CC chamber
of 400x400x400mm with a cast iron cover. The
earth electrode shall have staggered holes of
12mm dia and the electrode should be covered
150mm alround with alternate layers of salt and
charcoal from the bottom of the CC chamber.
The connection from the electrode is to be
established through GI strip using GI bolts and
nuts.Each 6 4317.00 25902.00
36 7.3 55 Supplying and running of GI/Copper strips for
grounding connections, using necessary fixing
materials as required.
GI strip
a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00
c 7.3.10 55 600 x 600 x 3 mm copper plate Each 2 7148.00 14296.00
37 7.22 64 Supplying and running GI/Copper conductor
for grounding and (along with other wires in
conduit system of wiring) using necessary
suitable size clamps, nails, guttas/spacers etc.,
Copper Wire.
b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00
RITES Ltd.,
For and on behalf of DTE 77 Signature of the Bidder
Page 79
Unit Qty Rate Amount SN Item No P.No. Description
38 7.12 62 Supplying and fixing of class A (medium duty)
GI pipe of wall thickness not less than 3.25mm
on pole/wall/drain crossing with necessary
clamping arrangements for UG cable of 1.1 KV.
a 7.12.2 62 50mm Mtr 20 391.00 7820.00
b 7.12.5 62 100mm Mtr 15 920.00 13800.00
Part A - KPWD SR Items - Electrical works 1702546.44
Total Quoted Cost of Electrical Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the
above items
Percentage in
figure
(+) / (-) / At par
Percentage in
words
Plus / Minus / At par
RITES Ltd.,
For and on behalf of DTE 78 Signature of the Bidder
Page 80
SN Description of Work Unit Qty Rate Amount
Part B - Market Rate Items
Main Power Panel
1 Main Power Panel
Supply, installation, testing and commissioning of LT
Main Power Panel fabricated out of 16 SWG sheet
steel metal floor mounting type with all normal
practice like derusting, degreasing, phosphating,
powder coated to the approved make as per
specification, comprisiing of the following:-
Incomer
I. 250 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0 - 500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
vi. 250 A 4P Change Over Switch - 1no
Outgoing
i125 A 3P +NL - 1 No
i 63 A 16 KA 3P MCCB - 12 nos.
ii. 40 A 4Pole MCB - 4nos. Nos 1.00
2 Sub MV Panel
Supply, installation, testing and commissioning of LT
Sub MV Panel fabricated out of 16 SWG sheet steel
metal floor mounting type with all normal practice like
derusting, degreasing, phosphating, powder coated
to the approved make as per specification,
comprisiing of the following:-
Incomer
I. 125 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0-500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
Outgoing
iii. 63 A 4Pole 16 KA MCCB - 12 nos.
iii. 40 A 4Pole MCB - 3 nos. Nos 1.00
Part B - Market rate Items - Electrical works
The bidder is required to quote his rates in figure
and words for Part B-Non SR items of Electrical
works
Construction of Govt. Polytechnic College at Surpur in Yadgir District for DTE - Electrical Works
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DTE 79 Signature of the Bidder