Directional Cartridges

Directional Cartridges

Powered by Sun QuickPrint,your on-demand, customized catalogue solution.

This information is subject to change without notice. Visit www.sunhydraulics.com for complete and up to date information.

© 2016 Sun Hydraulics

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DLVB 2-way, solenoid-operated directional, Digital Logic Valve - pilotcapacity

1

DLDA 2-way, solenoid-operated directional spoolvalve

2

DLDB Value Series, 2-way, solenoid-operated directional spool valve - 3600 psi (250bar)

3

DTDA 2-way, direct-acting, solenoid-operated directional poppetvalve

4

DTDB Value Series, 2-way, solenoid-operated directional poppet - valve 3600 psi (250bar)

5

DTCA 2-way, direct-acting, solenoid-operated directional poppet valve withoverlap

6

DFCA 2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2

7

DFDA 2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2

8

DFEA 2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2

9

DFFA 2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2

10

DFCB 2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1

11

DFDB 2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1

12

DFEB 2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1

13

DFFB 2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1

14

DACC 2-way, 2 stage, solenoid-operated directional poppetvalve

15

DAAA 2-way, solenoid-operated directional spool valve - pilotcapacity

16

DAAL 2-way, solenoid-operated directional spool valve - pilotcapacity

17

DLDAZ 2-way, solenoid-operated directional spool valve with positionswitch

18

DTCAZ 2-way, direct-acting, solenoid-operated directional poppet valve with overlap andposition switch

19

DLDAS 2-way, soft shift, solenoid-operated directional spoolvalve

20

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DTDAS 2-way, direct-acting, soft shift, solenoid-operated directional poppetvalve

21

DAALS 2-way, soft shift, solenoid-operated directional spool valve - pilotcapacity

22

HDDA 2-way, solenoid-operated directional poppet valve - aftercheck

23

DWDM 3-way, manually-operated, directional poppetvalve

24

DMDA 3-way, solenoid-operated directional spoolvalve

25

DMDB Value Series, 3-way, solenoid-operated directional spool valve - 3600 psi (250bar)

26

DWDA 3-way, direct-acting, solenoid-operated directional poppetvalve

27

DWDB Value Series, 3-way, direct-acting, solenoid-operated directional poppet valve - 3600psi (250 bar)

28

DBAA 3-way, solenoid-operated directional spool valve - pilotcapacity

29

DBAL 3-way, solenoid-operated directional spool valve - pilotcapacity

30

DMDAZ 3-way, solenoid-operated directional spool valve with positionswitch

31

DMDM 3-way, manually-operated, directional spoolvalve

32

DMDAS 3-way, soft shift, solenoid-operated directional spoolvalve

33

DBALS 3-way, soft shift, solenoid-operated directional spool valve - pilotcapacity

34

DNDA 4-way, 2-position, solenoid-operated directional spoolvalve

35

DNDB Value Series, 4-way, 2-position, solenoid-operated directional spool valve - 3600 psi(250 bar)

36

DNCA 4-way, 2-position, solenoid-operated directional spool valve with closedtransition

37

DNDC 4-way, 3-position, solenoid-operated directional spoolvalve

38

DNCAZ 4-way, 2-position, solenoid-operated directional spool valve with closed transition andposition switch

39

DNDAS 4-way, 2-position, soft shift, solenoid-operated directional spoolvalve

40

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DNDY 2-position, 6-way, solenoid-operated directional spoolvalve

41

DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spoolvalve

42

DTDM 2-way, manually-operated, directional poppetvalve

43

DTCM 2-way, manually-operated, directional poppet valve withoverlap

44

DAAH 2-way, hydraulically-operated, spool directional valve - pilotcapacity

45

DBAH 3-way, hydraulically-operated, spool directional valve - pilotcapacity

46

DLDM 2-way, manually-operated, directional spoolvalve

47

DAAP 2-way, air-operated, spool directional valve - pilotcapacity

48

DBAP 3-way, air-operated, spool directional valve - pilotcapacity

49

DFCA8 2-way, poppet directional valve with integral T-8A control cavity - control 1-2

50

DFDA8 2-way, poppet directional valve with integral T-8A control cavity - control 1-2

51

DFEA8 2-way, poppet directional valve with integral T-8A control cavity - control 1-2

52

DFFA8 2-way, poppet directional valve with integral T-8A control cavity - control 1-2

53

DAAM 2-way, manually-operated, spool directional valve - pilotcapacity

54

DFCB8 2-way, poppet directional valve with integral T-8A control cavity - control 2-1

55

DFDB8 2-way, poppet directional valve with integral T-8A control cavity - control 2-1

56

DFEB8 2-way, poppet directional valve with integral T-8A control cavity - control 2-1

57

DPBP 3-way, pilot operated, directional valve with drain to port 4 (1 to 2 open, 3blocked)

58

DPCP 3-way, pilot operated, directional valve with drain to port 4 (1 to 2 open, 3blocked)

59

DRBP 3-way, direct-acting, directional valve with drain to port 4 (1 to 2 open, 3blocked)

60

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DVBP 3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity (1 to 2 open, 3 blocked)

61

DVCP 3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity (1 to 2 open, 3 blocked)

62

DRBPX 3-way, direct-acting, fixed setting, directional valve with drain to port 4 (1 to 2 open, 3blocked)

63

FTCG 3-way, 2-position, proportional directionalvalve

64

FTDG 3-way, 2-position, proportional directionalvalve

65

CSAN Insert style, single ball shuttle valve with signal at port2

66

CSZN Insert style, single ball shuttle valve with signal at port2

67

DBAM 3-way, manually-operated, spool directional valve - pilotcapacity

68

DRBR 3-way, direct-acting, directional valve with drain to port 4 (3 to 4 open, port 2blocked)

69

DRBRX 3-way, direct-acting, fixed setting, directional valve with drain to port 4 (3 to 4 open,port 2 blocked)

70

DRCR 3-way, direct-acting, directional valve with drain to port 4 (3 to 4 open, port 2blocked)

71

FTCB 3-way, 3-position, proportional directionalvalve

72

FTDB 3-way, 3-position, proportional directionalvalve

73

FTCH 3-way, 3-position, proportional directional valve with center bleeddown

74

FTDH 3-way, 3-position, proportional directional valve with center bleeddown

75

FTEH 3-way, 3-position, proportional directional valve with center bleeddown

76

FTFH 3-way, 3-position, proportional directional valve with center bleeddown

77

FTHH 3-way, 3-position, proportional directional valve with center bleeddown

78

CXAA Free flow nose to side check valve - pilotcapacity

79

CXBA Free flow nose to side checkvalve

80

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

CXDA Free flow nose to side checkvalve

81

CXFA Free flow nose to side checkvalve

82

CXHA Free flow nose to side checkvalve

83

CXJA Free flow nose to side checkvalve

84

CXKA Free flow nose to side checkvalve

85

CXZA Free flow nose to side checkvalve

86

CXAD Free flow side to nose checkvalve

87

CXCD Free flow side to nose checkvalve

88

CXED Free flow side to nose checkvalve

89

CXGD Free flow side to nose checkvalve

90

CXID Free flow side to nose checkvalve

91

CXBG Flush mount, free flow nose to side checkvalve

92

CNBC Free flow nose to side check valve with bypassorifice

93

CNDC Free flow nose to side check valve with bypassorifice

94

CNFC Free flow nose to side check valve with bypassorifice

95

CNHC Free flow nose to side check valve with bypassorifice

96

CNJC Free flow nose to side check valve with bypassorifice

97

CNKC Free flow nose to side check valve with bypassorifice

98

CDAP Mechanically-operated, back-to-back checkvalve

99

CDAQ Mechanically-operated, back-to-back checkvalve

100

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

CXDC Free flow nose to side check valve with port 3blocked

101

CXFC Free flow nose to side check valve with port 3blocked

102

CXHC Free flow nose to side check valve with port 3blocked

103

CXJC Free flow nose to side check valve with port 3blocked

104

CXCE Free flow side to nose check valve with port 3blocked

105

CXEE Free flow side to nose check valve with port 3blocked

106

CXGE Free flow side to nose check valve with port 3blocked

107

CXIE Free flow side to nose check valve with port 3blocked

108

CNCD Free flow side to nose check valve with bypass orifice and port 3blocked

109

CNED Free flow side to nose check valve with bypass orifice and port 3blocked

110

CNGD Free flow side to nose check valve with bypass orifice and port 3blocked

111

CNID Free flow side to nose check valve with bypass orifice and port 3blocked

112

DKDC Normally closed, balanced poppet, logic element - pilot-to-open

113

DKDS Normally closed, balanced poppet, logic element - pilot-to-open

114

DKFC Normally closed, balanced poppet, logic element - pilot-to-open

115

DKFS Normally closed, balanced poppet, logic element - pilot-to-open

116

DKHC Normally closed, balanced poppet, logic element - pilot-to-open

117

DKHS Normally closed, balanced poppet, logic element - pilot-to-open

118

DKJC Normally closed, balanced poppet, logic element - pilot-to-open

119

DKJS Normally closed, balanced poppet, logic element - pilot-to-open

120

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DKDD Normally closed, balanced poppet, logic element - vent-to-open

121

DKDR Normally closed, balanced poppet, logic element - vent-to-open

122

DKFD Normally closed, balanced poppet, logic element - vent-to-open

123

DKFR Normally closed, balanced poppet, logic element - vent-to-open

124

DKHD Normally closed, balanced poppet, logic element - vent-to-open

125

DKHR Normally closed, balanced poppet, logic element - vent-to-open

126

DKJD Normally closed, balanced poppet, logic element - vent-to-open

127

DKJR Normally closed, balanced poppet, logic element - vent-to-open

128

DODC Normally open, balanced poppet, logic element - pilot-to-close

129

DODS Normally open, balanced poppet, logic element - pilot-to-close

130

DOFC Normally open, balanced poppet, logic element - pilot-to-close

131

DOFS Normally open, balanced poppet, logic element - pilot-to-close

132

DOHC Normally open, balanced poppet, logic element - pilot-to-close

133

DOHS Normally open, balanced poppet, logic element - pilot-to-close

134

DOJC Normally open, balanced poppet, logic element - pilot-to-close

135

DOJS Normally open, balanced poppet, logic element - pilot-to-close

136

DODD Normally open, balanced poppet, logic element - vent-to-close

137

DODR Normally open, balanced poppet, logic element - vent-to-close

138

DOFD Normally open, balanced poppet, logic element - vent-to-close

139

DOFR Normally open, balanced poppet, logic element - vent-to-close

140

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DOHD Normally open, balanced poppet, logic element - vent-to-close

141

DOHR Normally open, balanced poppet, logic element - vent-to-close

142

DOJD Normally open, balanced poppet, logic element - vent-to-close

143

DOJR Normally open, balanced poppet, logic element - vent-to-close

144

LODC Pilot-to-close, spring biased closed, unbalanced poppet logicelement

145

LOFC Pilot-to-close, spring biased closed, unbalanced poppet logicelement

146

LOHC Pilot-to-close, spring biased closed, unbalanced poppet logicelement

147

LOJC Pilot-to-close, spring biased closed, unbalanced poppet logicelement

148

LOKC Pilot-to-close, spring biased closed, unbalanced poppet logicelement

149

LODA Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1

150

LOFA Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1

151

LOHA Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1

152

LOJA Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1

153

LOKA Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1

154

LODB Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2

155

LOFB Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2

156

LOHB Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2

157

LOJB Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2

158

LOKB Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2

159

LODD Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2

160

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

LOFD Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2

161

LOHD Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2

162

LOJD Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2

163

LOKD Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2

164

LODA8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 and integral T-8A control cavity

165

LOFA8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 and integral T-8A control cavity

166

LOHA8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 and integral T-8A control cavity

167

LOJA8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 and integral T-8A control cavity

168

LOKA8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 and integral T-8A control cavity

169

LODB8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2 and integral T-8A control cavity

170

LOFB8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2 and integral T-8A control cavity

171

LOHB8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2 and integral T-8A control cavity

172

LOJB8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2 and integral T-8A control cavity

173

LOKB8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 2 and integral T-8A control cavity

174

CKBB Pilot-to-open check valve with standardpilot

175

CKBG Flush mount pilot-to-open check valve with sealedpilot

176

CKCB Pilot-to-open check valve with standardpilot

177

CKEB Pilot-to-open check valve with standardpilot

178

CKGB Pilot-to-open check valve with standardpilot

179

CKIB Pilot-to-open check valve with standardpilot

180

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

LODD8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2 and integral T-8A control cavity

181

LOFD8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2 and integral T-8A control cavity

182

LOHD8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2 and integral T-8A control cavity

183

LOJD8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2 and integral T-8A control cavity

184

LOKD8 Vent-to-open, spring biased closed, unbalanced poppet logic element with pilot sourcefrom port 1 or 2 and integral T-8A control cavity

185

CKBD Pilot-to-open check valve with sealedpilot

186

CKCD Pilot-to-open check valve with sealedpilot

187

CKED Pilot-to-open check valve with sealedpilot

188

CKGD Pilot-to-open check valve with sealedpilot

189

CKID Pilot-to-open check valve with sealedpilot

190

LODO Pilot-to-close, spring biased open, unbalanced poppet logicelement

191

LOFO Pilot-to-close, spring biased open, unbalanced poppet logicelement

192

LOHO Pilot-to-close, spring biased open, unbalanced poppet logicelement

193

LOJO Pilot-to-close, spring biased open, unbalanced poppet logicelement

194

LOKO Pilot-to-close, spring biased open, unbalanced poppet logicelement

195

CVCV Vented pilot-to-open checkvalve

196

CVEV Vented pilot-to-open checkvalve

197

CVGV Vented pilot-to-open checkvalve

198

CVIV Vented pilot-to-open checkvalve

199

LOFOZ Pilot-to-close, spring biased open, unbalanced poppet logic element with positionswitch

200

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

LOHOZ Pilot-to-close, spring biased open, unbalanced poppet logic element with positionswitch

201

LOJOZ Pilot-to-close, spring biased open, unbalanced poppet logic element with positionswitch

202

LOKOZ Pilot-to-close, spring biased open, unbalanced poppet logic element with positionswitch

203

CKCV Vented pilot-to-open check valve - atmosphericallyreferenced

204

CKEV Vented pilot-to-open check valve - atmosphericallyreferenced

205

CKGV Vented pilot-to-open check valve - atmosphericallyreferenced

206

CKIV Vented pilot-to-open check valve - atmosphericallyreferenced

207

CNCE Pilot-to-open check valve with bypassorifice

208

CNEE Pilot-to-open check valve with bypassorifice

209

CNGE Pilot-to-open check valve with bypassorifice

210

LKDC Pilot-to-open, spring biased closed, unbalanced poppet logicelement

211

LKFC Pilot-to-open, spring biased closed, unbalanced poppet logicelement

212

LKHC Pilot-to-open, spring biased closed, unbalanced poppet logicelement

213

LKJC Pilot-to-open, spring biased closed, unbalanced poppet logicelement

214

LKFCZ Pilot-to-open, spring biased closed, unbalanced poppet logic element with positionswitch

215

LKHCZ Pilot-to-open, spring biased closed, unbalanced poppet logic element with positionswitch

216

LKJCZ Pilot-to-open, spring biased closed, unbalanced poppet logic element with positionswitch

217

LOFCZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with positionswitch

218

LOHCZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with positionswitch

219

LOJCZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with positionswitch

220

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

LOKCZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with positionswitch

221

LOECZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with meteringnotches and position switch

222

LOGCZ Pilot-to-close, spring biased closed, unbalanced poppet logic element with meteringnotches and position switch

223

DKDR8 Normally closed, balanced poppet, logic element with integral T-8A control cavity -vent-to-open

224

DKFR8 Normally closed, balanced poppet, logic element with integral T-8A control cavity -vent-to-open

225

DKHR8 Normally closed, balanced poppet, logic element with integral T-8A control cavity -vent-to-open

226

DKJR8 Normally closed, balanced poppet, logic element with integral T-8A control cavity -vent-to-open

227

COBA Pilot-to-close checkvalve

228

COBG Pilot-to-close checkvalve

229

CODA Pilot-to-close checkvalve

230

COFA Pilot-to-close checkvalve

231

COHA Pilot-to-close checkvalve

232

COJA Pilot-to-close checkvalve

233

COKA Pilot-to-close checkvalve

234

DKDP Normally closed, balanced poppet, logic element - pressureadjustable

235

DKFP Normally closed, balanced poppet, logic element - pressureadjustable

236

DKHP Normally closed, balanced poppet, logic element - pressureadjustable

237

DKJP Normally closed, balanced poppet, logic element - pressureadjustable

238

CNFE Pilot-to-close check valve with bypassorifice

239

CNHE Pilot-to-close check valve with bypassorifice

240

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

CNJE Pilot-to-close check valve with bypassorifice

241

CODD 20:1 ratio, pilot-to-close checkvalve

242

COFO 120:1 ratio, pilot-to-close checkvalve

243

DODR8 Normally open, balanced poppet, logic element with integral T-8A control cavity - vent-to-close

244

DOFR8 Normally open, balanced poppet, logic element with integral T-8A control cavity - vent-to-close

245

DOHR8 Normally open, balanced poppet, logic element with integral T-8A control cavity - vent-to-close

246

DOJR8 Normally open, balanced poppet, logic element with integral T-8A control cavity - vent-to-close

247

FTCK 3-way, 3-position, proportional directional valve with center bleed down and loadsense

248

FTDK 3-way, 3-position, proportional directional valve with center bleed down and loadsense

249

FTEK 3-way, 3-position, proportional directional valve with center bleed down and loadsense

250

FTFK 3-way, 3-position, proportional directional valve with center bleed down and loadsense

251

DODP Normally open, balanced poppet, logic element - pressureadjustable

252

DOFP Normally open, balanced poppet, logic element - pressureadjustable

253

DOHP Normally open, balanced poppet, logic element - pressureadjustable

254

DOJP Normally open, balanced poppet, logic element - pressureadjustable

255

CSAA Single ball shuttle valve with signalexternal

256

CSAW Single ball shuttle valve with signalexternal

257

CSAC Single ball shuttle valve with signal at port2

258

CSAD Single ball shuttle valve with signal at port2

259

CSAY Single ball shuttle valve with signal at port2

260

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

CSAZ Single ball shuttle valve with signal at port2

261

CDAA Back-to-back check/shuttle valve with signalexternal

262

CDAC Back-to-back check/shuttle valve with signal at port2

263

CDAD Back-to-back check/shuttle valve with signal at port2

264

CSAB Single ball shuttle valve with signal at port3

265

CSAX Single ball shuttle valve with signal at port3

266

CDAB Back-to-back check/shuttle valve with signal at port3

267

DSCH Low side, 3-position, hot oil shuttlevalve

268

DSEH Low side, 3-position, hot oil shuttlevalve

269

DSGH Low side, 3-position, hot oil shuttlevalve

270

DSIH Low side, 3-position, hot oil shuttlevalve

271

DSDD Low side, 3-position, hot oil shuttle valve with delayedshift

272

DSFD Low side, 3-position, hot oil shuttle valve with delayedshift

273

DSCL Direct-acting, low side, 3-position, shuttlevalve

274

DSCS High side, 3-position, shuttlevalve

275

DSES High side, 3-position, shuttlevalve

276

DSGS High side, 3-position, shuttlevalve

277

DSIS High side, 3-position, shuttlevalve

278

DSCO Spring offset, 2-position, high side shuttlevalve

279

DSEO Spring offset, 2-position, high side shuttlevalve

280

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DSGO Spring offset, 2-position, high side shuttlevalve

281

DSIO Spring offset, 2-position, high side shuttlevalve

282

DSCY 3-way, 2-position, vent-to-shift diverter valve, normallyopen

283

DSEY 3-way, 2-position, vent-to-shift diverter valve, normallyopen

284

DSGY 3-way, 2-position, vent-to-shift diverter valve, normallyopen

285

DSIY 3-way, 2-position, vent-to-shift diverter valve, normallyopen

286

DSCX 3-way, 2-position, vent-to-shift diverter valve, normallyclosed

287

DSEX 3-way, 2-position, vent-to-shift diverter valve, normallyclosed

288

DSGX 3-way, 2-position, vent-to-shift diverter valve, normallyclosed

289

DSIX 3-way, 2-position, vent-to-shift diverter valve, normallyclosed

290

DDDG 3-way, 2-position, pilot-to-shift, directionalvalve

291

DDFG 3-way, 2-position, pilot-to-shift, directionalvalve

292

DDHG 3-way, 2-position, pilot-to-shift, directionalvalve

293

DPBA 2-way, pilot operated, directional valve with internal drain to port 3 - normallyopen

294

DPCA 2-way, pilot operated, directional valve with internal drain to port 3 - normallyopen

295

DRBA 2-way, direct-acting, directional valve with internal drain to port 3 - normallyopen

296

DVBA 2-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity - normally open

297

DVCA 2-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity - normally open

298

DPBB 2-way, pilot operated, directional valve with internal drain to port 3 - normallyclosed

299

DPCB 2-way, pilot operated, directional valve with internal drain to port 3 - normallyclosed

300

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DRBB 2-way, direct-acting, directional valve with internal drain to port 3 - normallyclosed

301

DVBB 2-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity - normally closed

302

DVCB 2-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity - normally closed

303

DPBM 2-way, pilot operated, directional valve with drain to port 4 - normallyopen

304

DPCM 2-way, pilot operated, directional valve with drain to port 4 - normallyopen

305

DRBM 2-way, direct-acting, directional valve with drain to port 4 - normallyopen

306

DVBM 2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity - normally open

307

DVCM 2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity - normally open

308

DRBMX 2-way, direct-acting, fixed setting, directional valve with drain to port 4 - normallyopen

309

DRAY 2-way, pilot-to-shift directional valve with drain to port 4 - normallyopen

310

DPBN 2-way, pilot operated, directional valve with drain to port 4 - normallyclosed

311

DPCN 2-way, pilot operated, directional valve with drain to port 4 - normallyclosed

312

DRBN 3-way, direct-acting, directional valve with drain to port 4 - normallyclosed

313

DVBN 2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity - normally closed

314

DVCN 2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity - normally closed

315

DRBNX 2-way, direct-acting, fixed setting, directional valve with drain to port 4 - normallyclosed

316

DRAX 2-way, pilot-to-shift directional valve with drain to port 4 - normallyclosed

317

DPBC 3-way, pilot operated, directional valve with internal drain to port 3 (1 blocked, 2 to 3open)

318

DPCC 3-way, pilot operated, directional valve with internal drain to port 3 (1 blocked, 2 to 3open)

319

DRBC 3-way, direct-acting, directional valve with internal drain to port 3 (1 blocked, 2 to 3open)

320

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DRCC 3-way, direct-acting, directional valve with internal drain to port 3 (1 blocked, 2 to 3open)

321

DVBC 3-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity (1 blocked, 2 to 3 open)

322

DVCC 3-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity (1 blocked, 2 to 3 open)

323

DPBD 3-way, pilot operated, directional valve with internal drain to port 3 (1 to 2 open, 3blocked)

324

DPCD 3-way, pilot operated, directional valve with internal drain to port 3 (1 to 2 open, 3blocked)

325

DRBD 3-way, direct-acting, directional valve with internal drain to port 3 (1 to 2 open, 3blocked)

326

DVBD 3-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity (1 to 2 open, 3 blocked)

327

DVCD 3-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8Acontrol cavity (1 to 2 open, 3 blocked)

328

DPBO 3-way, pilot operated, directional valve with drain to port 4 (1 blocked, 2 to 3open)

329

DPCO 3-way, pilot operated, directional valve with drain to port 4 (1 blocked, 2 to 3open)

330

DRBO 3-way, direct-acting, directional valve with drain to port 4 (1 blocked, 2 to 3open)

331

DRCO 3-way, direct-acting, directional valve with drain to port 4 (1 blocked, 2 to 3open)

332

DVBO 3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity (1 blocked, 2 to 3 open)

333

DVCO 3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8A controlcavity (1 blocked, 2 to 3 open)

334

DRBOX 3-way, direct-acting, fixed setting, directional valve with drain to port 4 (1 blocked, 2 to3 open)

335

DNDM 4-way, manually-operated, directional spoolvalve

336

DCCF 4-way, 2-position, pilot-to-shift directionalvalve

337

DCDF 4-way, 2-position, pilot-to-shift directionalvalve

338

DCEF 4-way, 2-position, pilot-to-shift directionalvalve

339

DCFF 4-way, 2-position, pilot-to-shift directionalvalve

340

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

..............................................................................................................................................................

Table of Contents

DCCD 4-way, 2-position, pilot-to-shift, detented, directionalvalve

341

DCDD 4-way, 2-position, pilot-to-shift, detented, directionalvalve

342

DCED 4-way, 2-position, pilot-to-shift, detented, directionalvalve

343

DCFD 4-way, 2-position, pilot-to-shift, detented, directionalvalve

344

DCCC 4-way, 3-position, pilot-to-shift directionalvalve

345

DCDC 4-way, 3-position, pilot-to-shift directionalvalve

346

DCEC 4-way, 3-position, pilot-to-shift directionalvalve

347

DCFC 4-way, 3-position, pilot-to-shift directionalvalve

348

DDDC 4-way, 3-position, pilot-to-shift directionalvalve

349

DDFC 4-way, 3-position, pilot-to-shift directionalvalve

350

DDHC 4-way, 3-position, pilot-to-shift directionalvalve

351

FTCC 4-way, 3-position, meter in proportional directionalvalve

352

FTDC 4-way, 3-position, meter in proportional directionalvalve

353

FTEC 4-way, 3-position, meter in proportional directionalvalve

354

FTFC 4-way, 3-position, meter in proportional directionalvalve

355

FTHC 4-way, 3-position, meter in proportional directionalvalve

356

CXBM Insert style, free flow nose to side checkvalve

357

Cavity Information

Series Ports Cavities

Series Z Cartridges3/8-24 UNF Cartridge Thread5 mm Valve Hex Size11 - 14 Nm Valve Installation Torque

2-Port T-382A

Series P CartridgesM16 Cartridge Thread22,2 mm Valve Hex Size27 - 33 Nm Valve Installation Torque

2-Port2-Port (Deep)3-Port

T-8AT-8DPT-9A

Series 0 CartridgesM16 Cartridge Thread19,1 mm Valve Hex Size25,4 mm Valve Hex Size27 - 33 Nm Valve Installation Torque

2-Port2-Port (Deep)3-Port

T-162AT-162DPT-163A

Series 1 CartridgesM20 Cartridge Thread22,2 mm Valve Hex Size41 - 47 Nm Valve Installation Torque

2-Port2-Port3-Port4-Port4-Port6-Port

T-10AT-13AT-11AT-21AT-31AT-61A

Series 2 Cartridges1"-14 UNS Cartridge Thread28,6 mm Valve Hex Size61 - 68 Nm Valve Installation Torque

2-Port2-Port3-Port4-Port4-Port4-Port (Dual path)6-Port6-Port

T-3AT-5AT-2AT-22AT-32AT-52ADT-52AT-62A

Series 3 CartridgesM36 Cartridge Thread31,8 mm Valve Hex Size203 - 217 Nm Valve Installation Torque

2-Port3-Port4-Port4-Port4-Port (Dual path)6-Port6-Port

T-16AT-17AT-23AT-33AT-53ADT-53AT-63A

Series 4 CartridgesM48 Cartridge Thread41,3 mm Valve Hex Size474 - 508 Nm Valve Installation Torque

2-Port2-Port (Undercut)3-Port3-Port (Undercut)4-Port4-Port (Undercut)4-Port4-Port (Dual path)6-Port6-Port

T-18AT-18AUT-19AT-19AUT-24AT-24AUT-34AT-54ADT-54AT-64A

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 357

MODELDLVB

2-way, solenoid-operated directional, Digital Logic Valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

X-Control, C-Spool

X-Control, H-SpoolThis high-speed, low-power, solenoid-operated, 2-way, 2-position cartridge is a direct-acting, balanced-spool, pilotvalve used to pilot other full-flow valves. The valve is available in either a normally open or normally closedconfiguration.This cartridge can be installed directly into a cavity in the end of many of Sun's pilot-operated and ventable valvesto provide integrated pilot control.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 41 cc/min.@350 barSwitching Frequency 13 HzResponse Time - Normally Closed Spool 12 msResponse Time - Normally Open Spool 9 msSeal kit - Cartridge Buna: 990708007Seal kit - Cartridge Viton: 990708006

(X)CONTROLX Standard

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

(M)CONNECTORM M12 4 pin

(12)VOLTAGE12 12 VDC

Standard Material/Coating/LH Mild Steel, Zinc-Nickel24 24 VDC

snhy.com/DLVB

Model Code Example: DLVBXCNM12CONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 357

MODELDLDA

2-way, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-13A

X-Control, C-Spool X-Control, H-Spool

M or S-Control, C-Spool M or S-Control, H-Spool

D-Control, C-Spool D-Control, H-Spool

L-Control, C-Spool L-Control, H-Spool

T-Control, C-Spool T-Control, H-Spool

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The valve isavailable in either a normally open or normally closed configuration.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Viton: 990413006

(X)CONTROLX No Manual OverrideM Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are availableMATERIAL/COATING

Standard Material/Coating

snhy.com/DLDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DLDAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 3 of 357

MODELDLDB

Value Series, 2-way, solenoid-operated directional spool valve - 3600 psi (250bar)SERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-13A

X-Control, C-Spool X-Control, H-Spool

M-Control, C-Spool M-Control, H-Spool

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The valve isavailable in either a normally open or normally closed configuration.

TECHNICAL DATAMaximum Operating Pressure 250 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 50 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990010007Seal kit - Cartridge Viton: 990010006

(X)CONTROLX No Manual OverrideM Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

* Additional coil options are available

snhy.com/DLDB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DLDBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 4 of 357

MODELDTDA

2-way, direct-acting, solenoid-operated directional poppet valveSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-13A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve isavailable in either a normally open or normally closed configuration. Due to the poppet style construction, this valvehas extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DTDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DTDAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 5 of 357

MODELDTDB

Value Series, 2-way, solenoid-operated directional poppet - valve 3600 psi (250bar)SERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-13A

X-Control, C-Poppet X-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve isavailable in either a normally open or normally closed configuration. Due to the poppet style construction, this valvehas extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 250 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(X)CONTROLX No Manual OverrideM Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

* Additional coil options are available

snhy.com/DTDB

Model Code Example: DTDBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 6 of 357

MODELDTCA

2-way, direct-acting, solenoid-operated directional poppet valve with overlapSERIES 1 / CAPACITY: 23 L/min. / CAVITY: T-13A

X-Control, C-Poppet D-Control, C-Poppet

L-Control, C-Poppet M-Control, C-Poppet

T-Control, C-PoppetThis solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve is onlyavailable in a normally closed configuration. Due to the poppet style construction, this valve has extremely lowleakage.

Many poppet style directional valves pass a small amount of fluid when the pressure across them changessuddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this fromhappening.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DTCA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DTCAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 7 of 357

MODELDFCA

2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990310007Seal kit - Cartridge Viton: 990310006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFCA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFCAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 8 of 357

MODELDFDA

2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990203007Seal kit - Cartridge EPDM: 990203014Seal kit - Cartridge Viton: 990203006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFDAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 9 of 357

MODELDFEA

2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2SERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990016007Seal kit - Cartridge Viton: 990016006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFEA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFEAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 10 of 357

MODELDFFA

2-way, 2 stage, solenoid-operated directional poppet valve - flow 1-2SERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-18A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990018007Seal kit - Cartridge Viton: 990018006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFFA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFFAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 11 of 357

MODELDFCB

2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990310007Seal kit - Cartridge Viton: 990310006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFCB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFCBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 12 of 357

MODELDFDB

2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990203007Seal kit - Cartridge EPDM: 990203014Seal kit - Cartridge Viton: 990203006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFDB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFDBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 13 of 357

MODELDFEB

2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1SERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990016007Seal kit - Cartridge Viton: 990016006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are availableMATERIAL/COATING

Standard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DFEB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFEBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 14 of 357

MODELDFFB

2-way, 2 stage, solenoid-operated directional poppet valve - flow 2-1SERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-18A

X-Control, C-Poppet X-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

L-Control, C-Poppet L-Control, H-Poppet

M-Control, C-Poppet M-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990018007Seal kit - Cartridge EPDM: 990018014Seal kit - Cartridge Viton: 990018006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DFFB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DFFBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 15 of 357

MODELDACC

2-way, 2 stage, solenoid-operated directional poppet valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reversefree flow check. It is available in either a normally open or normally closed configuration. Due to its poppet styleconstruction, it has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990310007Seal kit - Cartridge EPDM: 990313014Seal kit - Cartridge Viton: 990310006

(M)CONTROLM Manual OverrideC Concealed Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC

* Additional coil options are available

snhy.com/DACC

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DACCMCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 16 of 357

MODELDAAA

2-way, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

M or S-Control, C-Spool

M or S-Control, H-SpoolThis solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot otherfull-flow valves. The valve is available in either a normally open or normally closed configuration.

This cartridge can be installed directly into a cavity in the end of many of Sun's pilot operated and ventable valvesto provide integrated pilot control.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Seal kit - Cartridge Buna: 990008007Seal kit - Cartridge EPDM: 990308114Seal kit - Cartridge Polyurethane: 990008002Seal kit - Cartridge Viton: 990008006

(M)CONTROLM Manual OverrideC Concealed Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC

* Additional coil options are available

snhy.com/DAAA

An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.NOTES

Model Code Example: DAAAMCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 17 of 357

MODELDAAL

2-way, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

X-Control, C-Spool X-Control, H-Spool

M or S-Control, C-Spool M or S-Control, H-Spool

D-Control, C-Spool D-Control, H-Spool

L-Control, C-Spool L-Control, H-Spool

T-Control, C-Spool T-Control, H-Spool

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot otherfull-flow valves. The valve is available in either a normally open or normally closed configuration.

This cartridge can be installed directly into a cavity in the end of many of Sun's pilot operated and ventable valvesto provide integrated pilot control.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990008007Seal kit - Cartridge EPDM: 990008014Seal kit - Cartridge Polyurethane: 990008002Seal kit - Cartridge Viton: 990008006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DAAL

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DAALXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 18 of 357

MODELDLDAZ

2-way, solenoid-operated directional spool valve with position switchSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-13A

Z-Control, C-Spool

Z-Control, H-Spool

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The valve isavailable in either a normally open or normally closed configuration.

The position switch provides confirmation that the valve is in the spring biased position.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge Viton: 990413006

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

(224)COIL *224 DIN 43650-Form A, 24 VDC212 DIN 43650-Form A, 12 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DLDAZ

An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.NOTES

Model Code Example: DLDAZCN224CONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 19 of 357

MODELDTCAZ

2-way, direct-acting, solenoid-operated directional poppet valve with overlapand position switchSERIES 1 / CAPACITY: 23 L/min. / CAVITY: T-13A

Z-Control, C-Poppet

Z-Control, H-Poppet

This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. Due to thepoppet-style construction, this valve has extremely low leakage.

Many poppet style directional valves pass a small amount of fluid when the pressure across them changessuddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this fromhappening.

The position switch provides confirmation that the valve is in the non-energized position.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

(224)COIL *224 DIN 43650-Form A, 24 VDC212 DIN 43650-Form A, 12 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DTCAZ

An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.NOTES

Model Code Example: DTCAZCN224CONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 20 of 357

MODELDLDAS

2-way, soft shift, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-13A

M or S-Control, C-Spool

M or S-Control, H-SpoolThis solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool valve with a soft shift feature.The soft shift feature greatly reduces system shock due to valve actuation. The valve is available in either anormally open or normally closed configuration.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Viton: 990413006

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DLDAS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DLDASCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 21 of 357

MODELDTDAS

2-way, direct-acting, soft shift, solenoid-operated directional poppet valveSERIES 1 / CAPACITY: 15 L/min. / CAVITY: T-13A

M-Control, C-Poppet

M-Control, H-Poppet This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style valve with a soft shift feature. Thesoft shift feature greatly reduces system shock due to valve actuation. The valve is available in either a normallyopen or normally closed configuration. Due to its poppet-style construction, this valve has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge EPDM: 990413014Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DTDAS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DTDASCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 22 of 357

MODELDAALS

2-way, soft shift, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

M or S-Control, C-Spool

M or S-Control, H-Spool This solenoid-operated 2-way, 2-position cartridge is a direct-acting, balanced spool valve with a soft shift feature.The soft shift feature greatly reduces system shock due to valve actuation. The valve is available in either anormally open or normally closed configuration.

This cartridge can be installed directly into a cavity in the end of many of Sun's pilot operated and ventable valvesto provide integrated pilot control.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990008007Seal kit - Cartridge Polyurethane: 990008002Seal kit - Cartridge Viton: 990008006

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DAALS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DAALSCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 23 of 357

MODELHDDA

2-way, solenoid-operated directional poppet valve - after checkSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-11A

X-ControlD-Control

L-ControlM or S-Control

T-Control

This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in afterthe check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applicationsand can be integrated directly into the actuator.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 2 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/HDDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: HDDAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 24 of 357

MODELDWDM

3-way, manually-operated, directional poppet valveSERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-11A

L-Control, A-Poppet

D-Control, A-Poppet

T-Control, A-Poppet

This manually operated, 2-position, 3-way directional cartridge is a direct-acting, poppet-style valve used to controlthe direction of flow in a hydraulic circuit. The valve is normally open between port 1 and port 2 with port 3 blocked.Operating the valve connects port 2 to 3 and blocks port 1. All flow paths are bidirectional and blocked paths areblocked in both directions. Due to the poppet style construction, this valve has extremely low leakage.

Manual operation is achieved via Sun's Twist/Lock manual override mechanism and is designed for intermittent(infrequent) use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge Viton: 990411006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(A)POPPET CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DWDM

Model Code Example: DWDMLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 25 of 357

MODELDMDA

3-way, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-11A

X-Control, A-Spool X-Control, B-Spool

X-Control, N-Spool X-Control, P-Spool

X-Control, R-Spool

This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge EPDM: 990411014Seal kit - Cartridge Viton: 990411006

(X)CONTROLX No Manual OverrideM Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideT Twist (Momentary) Manual Override

(A)SPOOL CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3N Normally Open 2 to 3, Closed 1 to 2B Normally Open 1 to 2, Closed 2 to 3,

Closed TransitionP Normally Open 1 to 3, Closed 1 to 2R Normally Open 2 to 3, Closed 1 to 2,

Closed Transition

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DMDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DMDAXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 26 of 357

MODELDMDB

Value Series, 3-way, solenoid-operated directional spool valve - 3600 psi (250bar)SERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-11A

X-Control, A-Spool X-Control, N-Spool

M-Control, A-Spool M-Control, N-Spool

This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

TECHNICAL DATAMaximum Operating Pressure 250 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990811007Seal kit - Cartridge Viton: 990811006

(X)CONTROLX No Manual OverrideM Manual Override

(A)SPOOL CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3N Normally Open 2 to 3, Closed 1 to 2

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

* Additional coil options are available

snhy.com/DMDB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DMDBXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 27 of 357

MODELDWDA

3-way, direct-acting, solenoid-operated directional poppet valveSERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-11A

X-Control M-Control

D-Control L-Control

T-Control This solenoid-operated 3-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve isnormally open between port 1 and port 2 with port 3 blocked. Energizing the valve connects port 2 to 3 and blocksport 1. All flow paths are bidirectional and blocked paths are blocked in both directions. Due to the poppet styleconstruction, this valve has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge Viton: 990411006

(X)CONTROLX No Manual OverrideM Manual Override (Standard)D Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideT Twist (Momentary) Manual Override

(A)POPPET CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DWDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DWDAXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 28 of 357

MODELDWDB

Value Series, 3-way, direct-acting, solenoid-operated directional poppet valve -3600 psi (250 bar)SERIES 1 / CAPACITY: 20 L/min. / CAVITY: T-11A

X-Control

M-ControlThis solenoid-operated 3-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve isnormally open between port 1 and port 2 with port 3 blocked. Energizing the valve connects port 2 to 3 and blocksport 1. All flow paths are bidirectional and blocked paths are blocked in both directions. Due to the poppet styleconstruction, this valve has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 250 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990811007Seal kit - Cartridge Viton: 990811006

(X)CONTROLX No Manual OverrideM Manual Override

(A)POPPET CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

* Additional coil options are available

snhy.com/DWDB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DWDBXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 29 of 357

MODELDBAA

3-way, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

M or S-Control, C-Spool

M or S-Control, H-SpoolThis solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot otherfull-flow valves. The valve is normally open between port 1 and port 2 or port 1 and port 3 and all flow paths arebidirectional.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 30 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Seal kit - Cartridge Buna: 990009007Seal kit - Cartridge EPDM: 990309014Seal kit - Cartridge Polyurethane: 990009002Seal kit - Cartridge Viton: 990009006

(M)CONTROLM Manual OverrideC Concealed Manual Override

(C)SPOOL CONFIGURATIONC Normally Open 1 to 3, Closed 1 to 2H Normally Open 1 to 2, Closed 1 to 3

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC

* Additional coil options are available

snhy.com/DBAA

An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.NOTES

Model Code Example: DBAAMCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 30 of 357

MODELDBAL

3-way, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

X-Control, H-Spool X-Control, C-Spool

M or S-Control, C-Spool M or S-Control, H-Spool

D-Control, C-Spool D-Control, H Spool

L-Control, C-Spool L-Control, H-Spool

T-Control, C-Spool T-Control, H-Spool

This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot otherfull-flow valves. The valve is normally open between port 1 and port 2 or port 1 and port 3 and all flow paths arebidirectional.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990009007Seal kit - Cartridge EPDM: 990309114Seal kit - Cartridge Polyurethane: 990009002Seal kit - Cartridge Viton: 990009006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(H)SPOOL CONFIGURATIONH Normally Open 1 to 2, Closed 1 to 3C Normally Open 1 to 3, Closed 1 to 2

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DBAL

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DBALXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 31 of 357

MODELDMDAZ

3-way, solenoid-operated directional spool valve with position switchSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-11A

Z-Control, B-Spool

Z-Control, R-SpoolThis solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transitionbetween positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be ofparticular importance in pilot control circuits.

The position switch provides confirmation that the valve is in the spring biased position.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge EPDM: 990411014Seal kit - Cartridge Viton: 990411006

(B)SPOOL CONFIGURATIONB Normally Open 1 to 2, Closed 2 to 3,

Closed TransitionR Normally Open 2 to 3, Closed 1 to 2,

Closed Transition

(N)SEAL MATERIALN Buna-NE EPDMV Viton

(224)COIL *224 DIN 43650-Form A, 24 VDC212 DIN 43650-Form A, 12 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DMDAZ

An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.NOTES

Model Code Example: DMDAZBN224CONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 32 of 357

MODELDMDM

3-way, manually-operated, directional spool valveSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-11A

L-Control, A-Spool L-Control, B-Spool

L-Control, N-Spool L-Control, P-Spool

L-Control, R-Spool D-Control, A-Spool

D-Control, B-Spool D-Control, N-Spool

D-Control, P-Spool D-Control, R-Spool

T-Control, A-Spool T-Control, B-Spool

T-Control, N-Spool T-Control, P-Spool

T-Control, R-Spool

This manually operated, 2-position, 3-way directional cartridge is a direct-acting, balanced spool valve used tocontrol the direction of flow in a hydraulic circuit. Manual operation is achieved via Sun's Twist/Lock manualoverride mechanism and is designed for intermittent (infrequent) use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge Viton: 990411006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(A)SPOOL CONFIGURATIONA Normally Open 1 to 2, Closed 2 to 3B Normally Open 1 to 2, Closed 2 to 3,

Closed TransitionN Normally Open 2 to 3, Closed 1 to 2P Normally Open 1 to 3, Closed 1 to 2R Normally Open 2 to 3, Closed 1 to 2,

Closed Transition

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DMDM

Model Code Example: DMDMLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 33 of 357

MODELDMDAS

3-way, soft shift, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 20 L/min. / CAVITY: T-11A

M or S-Control, N-Spool M or S-Control, A-Spool

M or S-Control, B-Spool M or S-Control, P-Spool

M or S-Control, R-Spool

This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990411007Seal kit - Cartridge EPDM: 990411014Seal kit - Cartridge Viton: 990411006

(N)SPOOL CONFIGURATIONN Normally Open 2 to 3, Closed 1 to 2A Normally Open 1 to 2, Closed 2 to 3B Normally Open 1 to 2, Closed 2 to 3,

Closed TransitionP Normally Open 1 to 3, Closed 1 to 2R Normally Open 2 to 3, Closed 1 to 2,

Closed Transition

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DMDAS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DMDASNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 34 of 357

MODELDBALS

3-way, soft shift, solenoid-operated directional spool valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

M or S-Control, H-Spool

M or S-Control, C-Spool

This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool pilot valve used to pilot otherfull flow valves. It also includes the soft shift feature which greatly reduces system shock due to valve actuation.This valve is either normally open between port 1 and port 2 or port 1 and port 3 and all flow paths are bidirectional.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990009007Seal kit - Cartridge EPDM: 990309014Seal kit - Cartridge Polyurethane: 990009002Seal kit - Cartridge Viton: 990009006

(H)SPOOL CONFIGURATIONH Normally Open 1 to 2, Closed 1 to 3C Normally Open 1 to 3, Closed 1 to 2

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DBALS

Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.NOTES

Model Code Example: DBALSHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 35 of 357

MODELDNDA

4-way, 2-position, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-31A

X-Control, N-Spool X-Control, C-Spool

X-Control, D-Spool X-Control, E-Spool

X-Control, H-Spool X-Control, J-Spool

X-Control, L-Spool X-Control, R-Spool

X-Control, S-Spool X-Control, T-Spool

X-Control, U-Spool X-Control, X-Spool

X-Control, Y-Spool X-Control, Z-Spool

This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge EPDM: 990431014Seal kit - Cartridge Viton: 990431006

(X)CONTROLX No Manual OverrideM Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideT Twist (Momentary) Manual Override

(N)SPOOL CONFIGURATIONN Through, Shift to CrossC Closed, Shift to ThroughD Closed, Shift to CrossE Cross, Shift to ClosedH Open, Shift to CrossJ Open, Shift to ThroughL Cross, Shift to P to A, B and T BlockedR Regen, Shift to CrossS Regen, Shift to ThroughT Tandem, Shift to Through

U Through, Shift to TandemX Cross, Shift to ThroughY Motor, Shift to CrossZ Motor, Shift to Through

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNDA

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DNDAXNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 36 of 357

MODELDNDB

Value Series, 4-way, 2-position, solenoid-operated directional spool valve - 3600psi (250 bar)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-31A

X-Control, N-Spool X-Control, C-Spool

X-Control, T-Spool X-Control, Y-Spool

M-Control, C-Spool M-Control, N-Spool

M-Control, T-Spool M-Control, Y-Spool

This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

TECHNICAL DATAMaximum Operating Pressure 250 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 66 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge Viton: 990431006

(X)CONTROLX No Manual OverrideM Manual Override (Standard)

(N)SPOOL CONFIGURATIONN Through, Shift to CrossC Closed, Shift to ThroughT Tandem, Shift to ThroughY Motor, Shift to Cross

(N)SEAL MATERIALN Buna-NV Viton

COIL *No coil

* Additional coil options are available

snhy.com/DNDB

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DNDBXNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 37 of 357

MODELDNCA

4-way, 2-position, solenoid-operated directional spool valve with closedtransitionSERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-31A

X-Control, X-Spool X-Control, A-Spool

X-Control, B-Spool X-Control, C-Spool

X-Control, J-Spool X-Control, L-Spool

X-Control, S-Spool X-Control, T-Spool

X-Control, W-Spool X-Control, Z-Spool

This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. Thetransition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which canbe of particular importance in pilot control circuits.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge EPDM: 990431014Seal kit - Cartridge Viton: 990431006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(X)SPOOL CONFIGURATIONX Cross, Shift to ThroughC Closed, Shift to ThroughA A to T, Shift to ThroughB B to T, Shift to ThroughJ Open, Shift to ThroughL Cross, Shift to P to A, B and T BlockedS Regen, Shift to ThroughT Tandem, Shift to ThroughW A and B Bleed to T, Shift to ThroughZ Motor, Shift to Through

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNCA

Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.NOTES

Model Code Example: DNCAXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 38 of 357

MODELDNDC

4-way, 3-position, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 20 L/min. / CAVITY: T-31A

C-Spool A-Spool

B-Spool H-Spool

R-Spool T-Spool

W-Spool Y-Spool

This direct acting, solenoid-operated, 4-way, 3-position spool valve is spring centered to the neutral position. Whencoil A is energized, the flow is from port 3 (P) to port 2 (A) and from port 4 (B) to port 1 (T). When coil B isenergized, the flow is from port 3 to port 4 and from port 2 to port 1.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge EPDM: 990431014Seal kit - Cartridge Viton: 990431006

(X)CONTROLX No Manual Override

(C)SPOOL CONFIGURATIONC Blocked CenterA A to T CenterB B to T CenterH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNDC

The two coils used in this assembly are interchangeable with one another, but once installed and wired, the coil closest to the hex body is considered CoilA, and the coil closest to the coil nut is Coil B.NOTES

Model Code Example: DNDCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 39 of 357

MODELDNCAZ

4-way, 2-position, solenoid-operated directional spool valve with closedtransition and position switchSERIES 1 / CAPACITY: 30 L/min. / CAVITY: T-31A

Z-Control, X-Spool Z-Control, A-Spool

Z-Control, B-Spool Z-Control, C-Spool

Z-Control, J-Spool Z-Control, L-Spool

Z-Control, S-Spool Z-Control, T-Spool

Z-Control, W-Spool Z-Control, Z-Spool

This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. Thetransition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which canbe of particular importance in pilot control circuits.

The position switch provides confirmation that the valve is in the spring biased position.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barSwitching Frequency 15000 cycles/hrSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge Viton: 990431006

(X)SPOOL CONFIGURATIONX Cross, Shift to ThroughC Closed, Shift to ThroughA A to T, Shift to ThroughB B to T, Shift to ThroughJ Open, Shift to ThroughL Cross, Shift to P to A, B and T BlockedS Regen, Shift to ThroughT Tandem, Shift to ThroughW A and B Bleed to T, Shift to ThroughZ Motor, Shift to Through

(N)SEAL MATERIALN Buna-NV Viton

(224)COIL *224 DIN 43650-Form A, 24 VDC212 DIN 43650-Form A, 12 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNCAZ

Model Code Example: DNCAZXN224CONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 40 of 357

MODELDNDAS

4-way, 2-position, soft shift, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 15 L/min. / CAVITY: T-31A

M or S-Control, N-Spool M or S-Control, C-Spool

M or S-Control, D-Spool M or S-Control, E-Spool

M or S-Control, H-Spool M or S-Control, L-Spool

M or S-Control, R-Spool M or S-Control, T-Spool

M or S-Control, U-Spool M or S-Control, Y-Spool

This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a softshift feature. The soft shift feature greatly reduces system shock due to valve actuation.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge EPDM: 990431014Seal kit - Cartridge Viton: 990431006

(N)SPOOL CONFIGURATIONN Through, Shift to CrossC Closed, Shift to ThroughD Closed, Shift to CrossE Cross, Shift to ClosedH Open, Shift to CrossL Cross, Shift to P to A, B and T BlockedR Regen, Shift to CrossT Tandem, Shift to ThroughU Through, Shift to TandemY Motor, Shift to Cross

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNDAS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DNDASNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 41 of 357

MODELDNDY

2-position, 6-way, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 20 L/min. / CAVITY: T-61A

X-Control D-Control

L-Control M or S-Control

T-Control This solenoid-operated 6-way, 2-position cartridge is a direct-acting, balanced spool valve. The typical use for thisvalve is to select between two separate circuits. The de-energized condition connects P and T to the first circuitand when energized connects P and T to the second circuit.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical 50 msMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barSwitching Frequency 15000 cycles/hrManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990461007Seal kit - Cartridge EPDM: 990461014Seal kit - Cartridge Viton: 990461006

(X)CONTROLX No Manual OverrideD Twist/Lock (Dual) Manual OverrideL Twist/Lock (Detent) Manual OverrideM Manual OverrideT Twist (Momentary) Manual Override

(X)SPOOL CONFIGURATIONX -

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNDY

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DNDYXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 42 of 357

MODELDNDYS

2-position, 6-way, soft shift, solenoid-operated directional spool valveSERIES 1 / CAPACITY: 20 L/min. / CAVITY: T-61A

M or S-Control

This solenoid-operated 6-way, 2-position cartridge is a direct-acting, balanced spool valve with a soft shift feature.The soft shift feature greatly reduces system shock due to valve actuation. The typical use for this valve is to selectbetween two separate circuits. The de-energized condition connects P and T to the first circuit and when energizedconnects P and T to the second circuit.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barManual Override Force Requirement 33 N/100 bar @ Port 1Manual Override Stroke 2,5 mmSeal kit - Cartridge Buna: 990461007Seal kit - Cartridge Viton: 990461006

(X)SPOOL CONFIGURATIONX -

(N)SEAL MATERIALN Buna-NE EPDMV Viton

COIL *No coil

212 DIN 43650-Form A, 12 VDC224 DIN 43650-Form A, 24 VDC712 Twin Lead, 12 VDC724 Twin Lead, 24 VDC912 Deutsch DT04-2P, 12 VDC924 Deutsch DT04-2P, 24 VDC

* Additional coil options are available

snhy.com/DNDYS

NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

Model Code Example: DNDESXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 43 of 357

MODELDTDM

2-way, manually-operated, directional poppet valveSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-13A

L-Control, C-Poppet L-Control, H-Poppet

D-Control, C-Poppet D-Control, H-Poppet

T-Control, C-Poppet T-Control, H-Poppet

This manually operated, 2-position, 2-way directional cartridge is a direct-acting, poppet-style valve used to controlthe direction of flow in a hydraulic circuit. The valve is available in either a normally open or normally closedconfiguration. Manual operation is achieved via Sun's Twist/Lock manual override mechanism and is designed forintermittent (infrequent) use only. Due to the poppet-style construction, this valve has extremely low leakage.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(C)POPPET CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DTDM

Model Code Example: DTDMLCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 44 of 357

MODELDTCM

2-way, manually-operated, directional poppet valve with overlapSERIES 1 / CAPACITY: 23 L/min. / CAVITY: T-13A

L-Control, C-Poppet

D-Control, C-Poppet

T-Control, C-Poppet

This manually operated, 2-position, 2-way directional cartridge is a direct-acting, poppet-style valve used to controlthe direction of flow in a hydraulic circuit. The valve is only available in a normally closed configuration. Manualoperation is achieved via Sun's Twist/Lock manual override mechanism and is designed for intermittent (infrequent)use only. Due to the poppet-style construction, this valve has extremely low leakage.

Many poppet style directional valves pass a small amount of fluid when the pressure across them changessuddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this fromhappening.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DTCM

Model Code Example: DTCMLCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 45 of 357

MODELDAAH

2-way, hydraulically-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

C-Spool

H-Spool

These pilot-stage, directional, 2-position, 2-way valves are hydraulically operated, spring-return cartridges and areavailable in either a normally open or normally closed configuration. These cartridges are designed for pilot flowapplications and utilize Sun's T-8A cavity so they can be used in conjunction with Sun's pilot-operated, main-stagevalves.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Minimum Pilot Pressure to Operate See Technical FeaturesPilot Control Port See Control OptionsSeal kit - Cartridge Buna: 990508007Seal kit - Cartridge Viton: 990508006

(B)CONTROLB External 4-SAE PortA External 1/8 NPTF PortD External 1/8 BSPP Port

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DAAH

Model Code Example: DAAHBCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 46 of 357

MODELDBAH

3-way, hydraulically-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

C-Spool

H-Spool

These pilot-stage, directional, 2-position, 3-way valves are hydraulically operated, spring-return cartridges and areavailable in two spool configurations; normally open 1 to 2 and normally open 1 to 3. These cartridges are designedfor pilot flow applications.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barMinimum Pilot Pressure to Operate See Technical FeaturesPilot Control Port See Control OptionsSeal kit - Cartridge Buna: 990509007Seal kit - Cartridge Viton: 990509006

(B)CONTROLB External 4-SAE PortA External 1/8 NPTF PortD External 1/8 BSPP Port

(C)SPOOL CONFIGURATIONC Normally Open 1 to 3, Closed 1 to 2H Normally Open 1 to 2, Closed 1 to 3

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DBAH

Model Code Example: DBAHBCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 47 of 357

MODELDLDM

2-way, manually-operated, directional spool valveSERIES 1 / CAPACITY: 45 L/min. / CAVITY: T-13A

L-Control, C-Spool L-Control, H-Spool

D-Control, C-Spool D-Control, H-Spool

T-Control, C-Spool T-Control, H-Spool

This manually operated, 2-position, 2-way directional cartridge is a direct-acting, balanced spool valve used tocontrol the direction of flow in a hydraulic circuit. The valve is available in either a normally open or normally closedconfiguration. Manual operation is achieved via Sun's Twist/Lock manual override mechanism and is designed forintermittent (infrequent) use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@210 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990413007Seal kit - Cartridge Polyurethane: 990413002Seal kit - Cartridge Viton: 990413006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DLDM

Model Code Example: DLDMLCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 48 of 357

MODELDAAP

2-way, air-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

C-Spool

H-Spool

These pilot-stage, directional, 2-position, 2-way valves are pneumatically operated, spring-return cartridges and areavailable in either normally open or normally closed configurations. These cartridges are designed for pilot flowapplications and utilize Sun's T-8A cavity so they can be used in conjunction with Sun's pilot-operated, main-stagevalves.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barMinimum Pilot Pressure to Operate See Technical FeaturesPilot Control Port See Control OptionsSeal kit - Cartridge Buna: 990508007Seal kit - Cartridge Viton: 990508006

(F)CONTROLF External 1/8 NPTF PortE External 4-SAE PortP External 1/8 BSPP Port

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DAAP

Model Code Example: DAAPFCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 49 of 357

MODELDBAP

3-way, air-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

C-Spool

H-SpoolThese pilot-stage, directional, 2-position, 3-way valves are pneumatically operated, spring-return cartridges and areavailable in two spool configurations; normally open 1 to 2 and normally open 1 to 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barMinimum Pilot Pressure to Operate 1,5 [+ port 1 press./100] barPilot Control Port See Control OptionsSeal kit - Cartridge Buna: 990509007Seal kit - Cartridge Viton: 990509006

(F)CONTROLF External 1/8 NPTF PortE External 4-SAE PortP External 1/8 BSPP Port

(C)SPOOL CONFIGURATIONC Normally Open 1 to 3, Closed 1 to 2H Normally Open 1 to 2, Closed 1 to 3

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DBAP

Model Code Example: DBAPFCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 50 of 357

MODELDFCA8

2-way, poppet directional valve with integral T-8A control cavity - control 1-2SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 1 to port 2, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660310007Seal kit - Cartridge Viton: 660310006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DFCA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFCA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 51 of 357

MODELDFDA8

2-way, poppet directional valve with integral T-8A control cavity - control 1-2SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 1 to port 2, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barCheck Cracking Pressure 3,5 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660203007Seal kit - Cartridge Viton: 660203006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DFDA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFDA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 52 of 357

MODELDFEA8

2-way, poppet directional valve with integral T-8A control cavity - control 1-2SERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 1 to port 2, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660016007Seal kit - Cartridge Polyurethane: 660016002Seal kit - Cartridge Viton: 660016006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DFEA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFEA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 53 of 357

MODELDFFA8

2-way, poppet directional valve with integral T-8A control cavity - control 1-2SERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-18A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 1 to port 2, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 990018007Seal kit - Cartridge EPDM: 990018014Seal kit - Cartridge Polyurethane: 990018002Seal kit - Cartridge Viton: 990018006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DFFA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFFA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 54 of 357

MODELDAAM

2-way, manually-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

L-Control, C-Spool L-Control, H-Spool

D-Control, C-Spool D-Control, H-Spool

T-Control, C-Spool T-Control, H-Spool

These pilot-stage, directional, 2-position, 2-way valves are manually operated cartridges and are available in eithera normally open or normally closed configuration. These cartridges are designed for pilot flow applications andutilize Sun's T-8A cavity so they can be used in conjunction with Sun's pilot-operated, main-stage valves. Manualoperation is achieved via Sun's Twist/Lock manual override mechanism and is designed for intermittent (infrequent)use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990108007Seal kit - Cartridge Viton: 990108006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally ClosedH Normally Open

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DAAM

Model Code Example: DAAMLCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 55 of 357

MODELDFCB8

2-way, poppet directional valve with integral T-8A control cavity - control 2-1SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 2 to port 1, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660310007Seal kit - Cartridge Viton: 660310006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DFCB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFCB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 56 of 357

MODELDFDB8

2-way, poppet directional valve with integral T-8A control cavity - control 2-1SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 2 to port 1, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660203007Seal kit - Cartridge Viton: 660203006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DFDB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFDB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 57 of 357

MODELDF�B8

2-way, poppet directional valve with integral T-8A control cavity - control 2-1SERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

This valve is a 2-position, 2-way poppet cartridge that incorporates an integral pilot control cavity. It controls flowfrom port 2 to port 1, exhibits extremely low leakage rates and will accept 5000 psi (350 bar) at both ports. Installinga pilot solenoid cartridge in the T-8A cavity results in a high flow directional valve. Other pilot options includemanual, hydraulic and pneumatic pilot cartridges.

TECHNICAL DATAMaximum Operating Pressure 350 barResponse Time - Typical see pilot control msMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmSeal kit - Cartridge Buna: 660016007Seal kit - Cartridge Polyurethane: 660016002Seal kit - Cartridge Viton: 660016006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DFEB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DFEB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 58 of 357

MODELDPBP

3-way, pilot operated, directional valve with drain to port 4 (1 to 2 open, 3blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge EPDM: 990021014Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingJ 25 - 1500 psi (1,7 - 105 bar), 1000 psi

(70 bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DPBP

Model Code Example: DPBPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 59 of 357

MODELDPCP

3-way, pilot operated, directional valve with drain to port 4 (1 to 2 open, 3blocked)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DPCP

Model Code Example: DPCPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 60 of 357

MODELDRBP

3-way, direct-acting, directional valve with drain to port 4 (1 to 2 open, 3blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBP

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 61 of 357

MODELDVBP

3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity (1 to 2 open, 3 blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

This valve is a, 3-way directional cartridge (1 to 2 open, 3 blocked) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBP

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBP8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 62 of 357

MODELDVCP

3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity (1 to 2 open, 3 blocked)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

This valve is a, 3-way directional cartridge (1 to 2 open, 3 blocked) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCP

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCP8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 63 of 357

MODELDRBPX

3-way, direct-acting, fixed setting, directional valve with drain to port 4 (1 to 2open, 3 blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Seal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(F)SHIFTING PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBPX

Model Code Example: DRBPXFNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 64 of 357

MODELFTCG

3-way, 2-position, proportional directional valveSERIES 2 / CAPACITY: 28 L/min. / CAVITY: T-52A

C-Spool

R-Spool

This valve is a 3-way, 2-position proportional directional valve. In the spring-biased position, a metered path isopen between 2 and 3 with port 4 blocked. Pilot pressure at port 1 creates a metering orifice between 3 and 4 thatis proportional to the pressure at 1. The force balance of the flow forces, spring and pilot pressure results in adegree of partial self-compensation as the load pressure changes. The spring chamber is drained through port 6and port 5 is not used.

Depending on the spool specified, ports 2, 3, and 4 are either closed or restricted during transition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Closed CrossoverR Restricted Crossover

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTCG

Model Code Example: FTCGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 65 of 357

MODELFTDG

3-way, 2-position, proportional directional valveSERIES 2 / CAPACITY: 70 L/min. / CAVITY: T-52A

C-Spool

R-Spool

This valve is a 3-way, 2-position proportional directional valve. In the spring-biased position, a metered path isopen between 2 and 3 with port 4 blocked. Pilot pressure at port 1 creates a metering orifice between 3 and 4 thatis proportional to the pressure at 1. The force balance of the flow forces, spring and pilot pressure results in adegree of partial self-compensation as the load pressure changes. The spring chamber is drained through port 6and port 5 is not used.

Depending on the spool specified, ports 2, 3, and 4 are either closed or restricted during transition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Closed CrossoverR Restricted Crossover

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTDG

Model Code Example: FTDGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 66 of 357

MODELCSAN

Insert style, single ball shuttle valve with signal at port 2CAPACITY: 4,7 L/min. / CAVITY: T-162DP

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990192007Seal kit - Cartridge Polyurethane: 990192002Seal kit - Cartridge Viton: 990192009

(X)CONTROLX Not Adjustable

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CSAN

Model Code Example: CSANXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 67 of 357

MODELCSZN

Insert style, single ball shuttle valve with signal at port 2SERIES Z / CAPACITY: 4 L/min. / CAVITY: T-382A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Valve Internal Hex Size 4 mmSeal kit - Cartridge Buna: 990382007Seal kit - Cartridge Viton: 990382006

(X)CONTROLX Not Adjustable

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CSZN

Model Code Example: CSZNXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 68 of 357

MODELDBAM

3-way, manually-operated, spool directional valve - pilot capacitySERIES P / CAPACITY: 1 L/min. / CAVITY: T-9A

L-Control, C-Spool L-Control, H-Spool

These pilot-stage, directional, 2-position, 3-way valves are manually operated cartridges and are available in twospool configurations; normally open 1 to 2 and normally open 1 to 3. These cartridges are designed for pilot flowapplications. Manual operation is achieved via Sun's Twist/Lock manual override mechanism and is designed forintermittent (infrequent) use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 660106007Seal kit - Cartridge EPDM: 660006014Seal kit - Cartridge Viton: 660106006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(C)SPOOL CONFIGURATIONC Normally Open 1 to 3, Closed 1 to 2H Normally Open 1 to 2, Closed 1 to 3

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DBAM

Model Code Example: DBAMLCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 69 of 357

MODELDRBR

3-way, direct-acting, directional valve with drain to port 4 (3 to 4 open, port 2blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (3 to 4 open, 2 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(N)ADJUSTMENT RANGEN 60 - 800 psi (4 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 200 psi (14

bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRBR

Model Code Example: DRBRLNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 70 of 357

MODELDRBRX

3-way, direct-acting, fixed setting, directional valve with drain to port 4 (3 to 4open, port 2 blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (3 to 4 open, 2 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Seal kit - Cartridge Buna: 660021007Seal kit - Cartridge Polyurethane: 660021002Seal kit - Cartridge Viton: 660021006

(F)SHIFTING PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBRX

Model Code Example: DRBRXFNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 71 of 357

MODELDRCR

3-way, direct-acting, directional valve with drain to port 4 (3 to 4 open, port 2blocked)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Direct-acting, 3-way directional cartridges (3 to 4 open, 2 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 50 cc/min.@210 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Concealed Manual OverrideK Handknob

(N)ADJUSTMENT RANGEN 60 - 800 psi (4 - 55 bar), 200 psi (14

bar) Standard SettingE 200 - 400 psi (14 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 200 psi (14

bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRCR

Model Code Example: DRCRLNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 72 of 357

MODELFTCB

3-way, 3-position, proportional directional valveSERIES 2 / CAPACITY: 28 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Ports 2, 3, and 4 are closed in the center position.Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that is proportional to the pressure at 1.Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilot pressure results in a degree of partialself-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTCB

Model Code Example: FTCBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 73 of 357

MODELFTDB

3-way, 3-position, proportional directional valveSERIES 2 / CAPACITY: 70 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Ports 2, 3, and 4 are closed in the center position.Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that is proportional to the pressure at 1.Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilot pressure results in a degree of partialself-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTDB

Model Code Example: FTDBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 74 of 357

MODELFTCH

3-way, 3-position, proportional directional valve with center bleed downSERIES 2 / CAPACITY: 28 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTCH

Model Code Example: FTCHXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 75 of 357

MODELFTDH

3-way, 3-position, proportional directional valve with center bleed downSERIES 2 / CAPACITY: 70 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTDH

Model Code Example: FTDHXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 76 of 357

MODELFTEH

3-way, 3-position, proportional directional valve with center bleed downSERIES 3 / CAPACITY: 60 L/min. / CAVITY: T-53A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 41 cc/min.@70 barPilot Volume Displacement 1,8 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTEH

Model Code Example: FTEHXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 77 of 357

MODELFTFH

3-way, 3-position, proportional directional valve with center bleed downSERIES 3 / CAPACITY: 145 L/min. / CAVITY: T-53A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 41 cc/min.@70 barPilot Volume Displacement 1,8 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTFH

Model Code Example: FTFHXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 78 of 357

MODELFTHH

3-way, 3-position, proportional directional valve with center bleed downSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-54A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Port 5 is not used.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@70 barPilot Volume Displacement 4,3 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990054007Seal kit - Cartridge Polyurethane: 990054002Seal kit - Cartridge Viton: 990054006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTHH

Model Code Example: FTHHXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 79 of 357

MODELCXAA

Free flow nose to side check valve - pilot capacitySERIES P / CAPACITY: 20 L/min. / CAVITY: T-8A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATASeal kit - Cartridge Buna: 990608007Seal kit - Cartridge EPDM: 990608014Seal kit - Cartridge Viton: 990608006

(X)CONTROLX Not Adjustable

(B)CRACKING PRESSUREB 15 psi (1 bar)F 100 psi (7 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXAA

Model Code Example: CXAAXBNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 80 of 357

MODELCXBA

Free flow nose to side check valveCAPACITY: 40 L/min. / CAVITY: T-162A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990192007Seal kit - Cartridge EPDM: 990192014Seal kit - Cartridge Polyurethane: 990192002Seal kit - Cartridge Viton: 990192009

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXBA

Model Code Example: CXBAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 81 of 357

MODELCXDA

Free flow nose to side check valveSERIES 1 / CAPACITY: 80 L/min. / CAVITY: T-13A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge EPDM: 990010014Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXDA

Model Code Example: CXDAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 82 of 357

MODELCXFA

Free flow nose to side check valveSERIES 2 / CAPACITY: 160 L/min. / CAVITY: T-5A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990203007Seal kit - Cartridge EPDM: 990203014Seal kit - Cartridge Viton: 990203009

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXFA

Model Code Example: CXFAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 83 of 357

MODELCXHA

Free flow nose to side check valveSERIES 3 / CAPACITY: 320 L/min. / CAVITY: T-16A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990016007Seal kit - Cartridge EPDM: 990016014Seal kit - Cartridge Polyurethane: 990016002Seal kit - Cartridge Viton: 990016006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXHA

Model Code Example: CXHAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 84 of 357

MODELCXJA

Free flow nose to side check valveSERIES 4 / CAPACITY: 610 L/min. / CAVITY: T-18A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990018007Seal kit - Cartridge EPDM: 990018014Seal kit - Cartridge Polyurethane: 990018002Seal kit - Cartridge Viton: 990018009

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXJA

Model Code Example: CXJAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 85 of 357

MODELCXKA

Free flow nose to side check valveSERIES 4 / CAPACITY: 900 L/min. / CAVITY: T-18AU

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990018007Seal kit - Cartridge EPDM: 990018014Seal kit - Cartridge Viton: 990018006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXKA

Model Code Example: CXKAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 86 of 357

MODELCXZA

Free flow nose to side check valveSERIES Z / CAPACITY: 4 L/min. / CAVITY: T-382A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 5 mmSeal kit - Cartridge Buna: 990382007Seal kit - Cartridge Viton: 990382006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CXZA

Model Code Example: CXZAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 87 of 357

MODELCXAD

Free flow side to nose check valveCAPACITY: 30 L/min. / CAVITY: T-162A

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to theoutlet (port 1) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990162007Seal kit - Cartridge EPDM: 990162014Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(X)CONTROLX Not Adjustable

(C)NOMINAL CONTROL PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXAD

Model Code Example: CXADXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 88 of 357

MODELCXCD

Free flow side to nose check valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to theoutlet (port 1) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge EPDM: 990010014Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(X)CONTROLX Not AdjustableL Manual Override

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXCD

Model Code Example: CXCDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 89 of 357

MODELCXED

Free flow side to nose check valveSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to theoutlet (port 1) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990203007Seal kit - Cartridge Viton: 990203006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXED

Model Code Example: CXEDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 90 of 357

MODELCXGD

Free flow side to nose check valveSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to theoutlet (port 1) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990016007Seal kit - Cartridge EPDM: 990016014Seal kit - Cartridge Polyurethane: 990016002Seal kit - Cartridge Viton: 990016006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXGD

Model Code Example: CXGDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 91 of 357

MODELCXID

Free flow side to nose check valveSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-18A

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to theoutlet (port 1) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990018007Seal kit - Cartridge Polyurethane: 990018002Seal kit - Cartridge Viton: 990018006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CXID

Model Code Example: CXIDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 92 of 357

MODELCXBG

Flush mount, free flow nose to side check valveCAPACITY: 40 L/min. / CAVITY: T-162A

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990162007Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(X)CONTROLX Not Adjustable

(A)CRACKING PRESSUREA 4 psi (0,3 bar)B 15 psi (1 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXBG

Model Code Example: CXBGXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 93 of 357

MODELCNBC

Free flow nose to side check valve with bypass orificeCAPACITY: 30 L/min. / CAVITY: T-162A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 1,6 mmSeal kit - Cartridge Buna: 990162007Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.062 in. (0,4 - 1,6 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .062 in. (0,4 - 1,6 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.062 in. (0,4 - 1,6 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .062 in. (0,4 - 1,6 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.062 in. (0,4 - 1,6 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .062 in. (0,4 - 1,6 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNBC

Model Code Example: CNBCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 94 of 357

MODELCNDC

Free flow nose to side check valve with bypass orificeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-13A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 2,7 mmSeal kit - Cartridge Buna: 990010007Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010009

(X)CONTROLX Not AdjustableL Manual Load Release

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .019 -

.107 in. (0,4 - 2,7 mm)A 4 psi (0,3 bar) Cracking Pressure, .019

- .107 in. (0,4 - 2,7 mm)B 15 psi (1 bar) Cracking Pressure, .019 -

.107 in. (0,4 - 2,7 mm)D 50 psi (3,5 bar) Cracking Pressure,

.019 - .107 in. (0,4 - 2,7 mm)E 75 psi (5 bar) Cracking Pressure, .019 -

.107 in. (0,4 - 2,7 mm)F 100 psi (7 bar) Cracking Pressure, .019

- .107 in. (0,4 - 2,7 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CNDC

Model Code Example: CNDCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 95 of 357

MODELCNFC

Free flow nose to side check valve with bypass orificeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 3,2 mmSeal kit - Cartridge Buna: 990203007Seal kit - Cartridge Viton: 990203006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .127 in. (0,4 - 3,2 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .127 in. (0,4 - 3,2 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .127 in. (0,4 - 3,2 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CNFC

Model Code Example: CNFCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 96 of 357

MODELCNHC

Free flow nose to side check valve with bypass orificeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-16A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 9,4 mmSeal kit - Cartridge Buna: 660019007Seal kit - Cartridge EPDM: 660019014Seal kit - Cartridge Polyurethane: 660019002Seal kit - Cartridge Viton: 660019009

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)A 4 psi (0,3 bar) Cracking Pressure, .019

- .252 in. (0,4 - 9,4 mm)B 15 psi (1 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)D 50 psi (3,5 bar) Cracking Pressure,

.019 - .252 in. (0,4 - 9,4 mm)E 75 psi (5 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)F 100 psi (7 bar) Cracking Pressure, .019

- .252 in. (0,4 - 9,4 mm)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CNHC

Model Code Example: CNHCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 97 of 357

MODELCNJC

Free flow nose to side check valve with bypass orificeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-18A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - ✁ mmSeal kit - Cartridge Buna: ✁✁0018007Seal kit - Cartridge Polyurethane: 990018002Seal kit - Cartridge Viton: 990018006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .354 in. (0,4 - 9 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .354 in. (0,4 - 9 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .354 in. (0,4 - 9 mm)G 150 psi (10 bar) Cracking Pressure,

.016 - .354 in. (0,4 - 9 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNJC

Model Code Example: CNJCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 98 of 357

MODELCNKC

Free flow nose to side check valve with bypass orificeSERIES 4 / CAPACITY: 680 L/min. / CAVITY: T-18AU

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specifiedorifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - ✂ mmSeal kit - Cartridge Buna: ✂✂0018007Seal kit - Cartridge Viton: 990018006

(X)CONTROLX Not Adjustable

(A)SETTING RANGEA 4 psi (0,3 bar) Cracking Pressure, .016

- .354 in. (0,4 - 9 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)C 30 psi (2 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .354 in. (0,4 - 9 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.354 in. (0,4 - 9 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .354 in. (0,4 - 9 mm)G 150 psi (10 bar) Cracking Pressure,

.016 - .354 in. (0,4 - 9 mm)Z 1 psi (0,07 bar) Cracking Pressure,

.016 - .354 in. (0,4 - 9 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNKC

Model Code Example: CNKCXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 99 of 357

MODELCDAP

Mechanically-operated, back-to-back check valveCAPACITY: 4,7 L/min. / CAVITY: T-162DP

The phaser check is a pair of checks, back-to-back, with the poppet at port 1 mechanically actuated. The valve ismeant to be installed into the piston of a cylinder. When the cylinder reaches the end of its stroke the poppet in thephaser check is shoved off its seat allowing flow through the piston. This allows two cylinders to get back intophase.

TECHNICAL DATAMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990162007Seal kit - Cartridge Viton: 990162006

(M)CONTROLM Mechanical ActuationB External 1/4 BSPP PortE External 4-SAE Port

(C)CRACKING PRESSUREC 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CDAP

Model Code Example: CDAPMCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 100 of 357

MODELCDAQ

Mechanically-operated, back-to-back check valveCAPACITY: 4,7 L/min. / CAVITY: T-162DP

The phaser check is a pair of checks, back-to-back, with both poppets mechanically actuated. The valve is meantto be installed into the piston or rod of a cylinder. When the cylinder reaches the end of its stroke the poppet in thephaser check is shoved off its seat allowing flow through the piston. This allows two cylinders to get back intophase.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990162007Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(M)CONTROLM Mechanical Actuation

(C)CRACKING PRESSUREC 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CDAQ

A special tool is required to install this cartridge. Use part number 998-101 to order this tool.NOTES

Model Code Example: CDAQMCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 101 of 357

MODELCXDC

Free flow nose to side check valve with port 3 blockedSERIES 1 / CAPACITY: 80 L/min. / CAVITY: T-11A

Free-flow, nose-to-side cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXDC

Model Code Example: CXDCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 102 of 357

MODELCXFC

Free flow nose to side check valve with port 3 blockedSERIES 2 / CAPACITY: 160 L/min. / CAVITY: T-2A

Free-flow, nose-to-side cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/CXFC

Model Code Example: CXFCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 103 of 357

MODELCXHC

Free flow nose to side check valve with port 3 blockedSERIES 3 / CAPACITY: 320 L/min. / CAVITY: T-17A

Free-flow, nose-to-side cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/CXHC

Model Code Example: CXHCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 104 of 357

MODELCXJC

Free flow nose to side check valve with port 3 blockedSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

Free-flow, nose-to-side cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barSeal kit - Cartridge Buna: 660016007Seal kit - Cartridge Polyurethane: 660016002Seal kit - Cartridge Viton: 660016006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)Z 1 psi (0,07 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CXJC

Model Code Example: CXJCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 105 of 357

MODELCXCE

Free flow side to nose check valve with port 3 blockedSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

Free-flow, side-to-nose cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/CXCE

Model Code Example: CXCEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 106 of 357

MODELCXEE

Free flow side to nose check valve with port 3 blockedSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

Free-flow, side-to-nose cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXEE

Model Code Example: CXEEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 107 of 357

MODELCXGE

Free flow side to nose check valve with port 3 blockedSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

Free-flow, side-to-nose cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXGE

Model Code Example: CXGEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 108 of 357

MODELCXIE

Free flow side to nose check valve with port 3 blockedSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

Free-flow, side-to-nose cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing threeport cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CXIE

Model Code Example: CXIEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 109 of 357

MODELCNCD

Free flow side to nose check valve with bypass orifice and port 3 blockedSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

Free-flow, side-to-nose cheater check valves with a bypass orifice function as a 2-port check valve in a 3-port cavity.They allow free flow from port 2 to port 1 with a customer specified orifice that controls flow from port 1 to port 2.Port 3 of the cartridge is blocked off.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 3,9 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.153 in. (0,4 - 3,9 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNCD

Model Code Example: CNCDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 110 of 357

MODELCNED

Free flow side to nose check valve with bypass orifice and port 3 blockedSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

Free-flow, side-to-nose cheater check valves with a bypass orifice function as a 2-port check valve in a 3-port cavity.They allow free flow from port 2 to port 1 with a customer specified orifice that controls flow from port 1 to port 2.Port 3 of the cartridge is blocked off.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 3,4 mmSeal kit - Cartridge Buna: 660202007Seal kit - Cartridge Polyurethane: 660002002Seal kit - Cartridge Viton: 660202006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.135 in. (0,4 - 3,4 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CNED

Model Code Example: CNEDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 111 of 357

MODELCNGD

Free flow side to nose check valve with bypass orifice and port 3 blockedSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

Free-flow, side-to-nose cheater check valves with a bypass orifice function as a 2-port check valve in a 3-port cavity.They allow free flow from port 2 to port 1 with a customer specified orifice that controls flow from port 1 to port 2.Port 3 of the cartridge is blocked off.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 5,5 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .218 in. (0,4 - 5,5 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNGD

Model Code Example: CNGDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 112 of 357

MODELCNID

Free flow side to nose check valve with bypass orifice and port 3 blockedSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

Free-flow, side-to-nose cheater check valves with a bypass orifice function as a 2-port check valve in a 3-port cavity.They allow free flow from port 2 to port 1 with a customer specified orifice that controls flow from port 1 to port 2.Port 3 of the cartridge is blocked off.

TECHNICAL DATAMaximum Operating Pressure 350 barOrifice Range 0,4 - 5,5 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNID

Model Code Example: CNIDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 113 of 357

MODELDKDC

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccSeal kit - Cartridge Buna: 990311007Seal kit - Cartridge Viton: 990311006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

snhy.com/DKDC

Model Code Example: DKDCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 114 of 357

MODELDKDS

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccPilot Passage into Valve 0,8 mmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge EPDM: 990021014Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DKDS

Model Code Example: DKDSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 115 of 357

MODELDKFC

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.@70 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: ✄✄0202007Seal kit - Cartridge Polyurethane: ✄✄0002002Seal kit - Cartridge Viton: ✄✄020200☎

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKFC

Model Code Example: DKFCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 116 of 357

MODELDKFS

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge EPDM: 990022014Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DKFS

Model Code Example: DKFSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 117 of 357

MODELDKHC

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKHC

Model Code Example: DKHCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 118 of 357

MODELDKHS

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge EPDM: 990023014Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DKHS

Model Code Example: DKHSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 119 of 357

MODELDKJC

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DKJC

Model Code Example: DKJCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 120 of 357

MODELDKJS

Normally closed, balanced poppet, logic element - pilot-to-openSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally closed, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the openposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge EPDM: 990024014Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DKJS

Model Code Example: DKJSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 121 of 357

MODELDKDD

Normally closed, balanced poppet, logic element - vent-to-openSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This is a normally closed, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the closed position. Venting the external port shifts it to the open position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccPilot Passage into Valve 0,8 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKDD

Model Code Example: DKDDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 122 of 357

MODELDKDR

Normally closed, balanced poppet, logic element - vent-to-openSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally closed, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the closed position. Venting port 4 shifts it to the open position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DKDR

Model Code Example: DKDRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 123 of 357

MODELDKFD

Normally closed, balanced poppet, logic element - vent-to-openSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This is a normally closed, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the closed position. Venting the external port shifts it to the open position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKFD

Model Code Example: DKFDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 124 of 357

MODELDKFR

Normally closed, balanced poppet, logic element - vent-to-openSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally closed, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the closed position. Venting port 4 shifts it to the open position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKFR

Model Code Example: DKFRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 125 of 357

MODELDKHD

Normally closed, balanced poppet, logic element - vent-to-openSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This is a normally closed, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the closed position. Venting the external port shifts it to the open position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKHD

Model Code Example: DKHDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 126 of 357

MODELDKHR

Normally closed, balanced poppet, logic element - vent-to-openSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally closed, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the closed position. Venting port 4 shifts it to the open position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 99002300✆

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKHR

Model Code Example: DKHRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 127 of 357

MODELDKJD

Normally closed, balanced poppet, logic element - vent-to-openSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This is a normally closed, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the closed position. Venting the external port shifts it to the open position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKJD

Model Code Example: DKJDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 128 of 357

MODELDKJR

Normally closed, balanced poppet, logic element - vent-to-openSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally closed, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the closed position. Venting port 4 shifts it to the open position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 99002400✝

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKJR

Model Code Example: DKJRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 129 of 357

MODELDODC

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccSeal kit - Cartridge Buna: 990311007Seal kit - Cartridge Viton: 990311006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DODC

Model Code Example: DODCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 130 of 357

MODELDODS

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccPilot Passage into Valve 0,8 mmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge EPDM: 990021014Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DODS

Model Code Example: DODSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 131 of 357

MODELDOFC

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOFC

Model Code Example: DOFCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 132 of 357

MODELDOFS

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge EPDM: 990022014Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DOFS

Model Code Example: DOFSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 133 of 357

MODELDOHC

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOHC

Model Code Example: DOHCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 134 of 357

MODELDOHS

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge EPDM: 990023014Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DOHS

Model Code Example: DOHSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 135 of 357

MODELDOJC

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(E)CONTROLE External 4-SAE Drain PortX Standard Pilot, Atmospheric Vent

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOJC

Model Code Example: DOJCEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 136 of 357

MODELDOJS

Normally open, balanced poppet, logic element - pilot-to-closeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally open, balanced poppet, switching element. Pilot pressure at port 3 shifts the valve to the closedposition.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge EPDM: 990024014Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(X)CONTROLX Standard Pilot

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DOJS

Model Code Example: DOJSXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 137 of 357

MODELDODD

Normally open, balanced poppet, logic element - vent-to-closeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This is a normally open, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the open position. Venting the external port shifts it to the closed position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,16 ccSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DODD

Model Code Example: DODDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 138 of 357

MODELDODR

Normally open, balanced poppet, logic element - vent-to-closeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally open, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the open position. Venting port 4 shifts it to the closed position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DODR

Model Code Example: DODRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 139 of 357

MODELDOFD

Normally open, balanced poppet, logic element - vent-to-closeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This is a normally open, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the open position. Venting the external port shifts it to the closed position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOFD

Model Code Example: DOFDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 140 of 357

MODELDOFR

Normally open, balanced poppet, logic element - vent-to-closeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally open, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the open position. Venting port 4 shifts it to the closed position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOFR

Model Code Example: DOFRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 141 of 357

MODELDOHD

Normally open, balanced poppet, logic element - vent-to-closeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This is a normally open, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the open position. Venting the external port shifts it to the closed position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOHD

Model Code Example: DOHDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 142 of 357

MODELDOHR

Normally open, balanced poppet, logic element - vent-to-closeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally open, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the open position. Venting port 4 shifts it to the closed position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOHR

Model Code Example: DOHRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 143 of 357

MODELDOJD

Normally open, balanced poppet, logic element - vent-to-closeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This is a normally open, balanced poppet, switching element. When the external vent port is blocked, the poppetremains in the open position. Venting the external port shifts it to the closed position, provided there is sufficientpressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(E)CONTROLE External 4-SAE Drain Port

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOJD

Model Code Example: DOJDEHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 144 of 357

MODELDOJR

Normally open, balanced poppet, logic element - vent-to-closeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally open, balanced poppet, switching element. When the vent port (port 4) is blocked, the poppetremains in the open position. Venting port 4 shifts it to the closed position, provided there is sufficient pressure atport 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(X)CONTROLX Vent to Operate

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOJR

Model Code Example: DOJRXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 145 of 357

MODELLODC

Pilot-to-close, spring biased closed, unbalanced poppet logic elementSERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting atport 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 0,99 ccPilot Passage into Valve 0,8 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 660011007Seal kit - Cartridge Polyurethane: 660011002Seal kit - Cartridge Viton: 660011009

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LODC

Model Code Example: LODCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 146 of 357

MODELLOFC

Pilot-to-close, spring biased closed, unbalanced poppet logic elementSERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting atport 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 1,1 ccPilot Passage into Valve 0,6 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 660202007Seal kit - Cartridge Polyurethane: 660002002Seal kit - Cartridge Viton: 660202006

(X)CONTROLX Standard Pilot

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOFC

Model Code Example: LOFCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 147 of 357

MODELLOHC

Pilot-to-close, spring biased closed, unbalanced poppet logic elementSERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting atport 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 4,1 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LOHC

Model Code Example: LOHCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 148 of 357

MODELLOJC

Pilot-to-close, spring biased closed, unbalanced poppet logic elementSERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting atport 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 9,9 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOJC

Model Code Example: LOJCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 149 of 357

MODELLOKC

Pilot-to-close, spring biased closed, unbalanced poppet logic elementSERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting atport 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 7,7 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge EPDM: 990019014Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LOKC

Model Code Example: LOKCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 150 of 357

MODELLODA

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1SERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction andwill function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 0,66 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LODA

Model Code Example: LODAXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 151 of 357

MODELLOFA

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1SERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction andwill function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOFA

Model Code Example: LOFAXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 152 of 357

MODELLOHA

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1SERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction andwill function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOHA

Model Code Example: LOHAXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 153 of 357

MODELLOJA

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1SERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction andwill function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 6,✞ ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not AdjustableL Stroke Adjustment

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOJA

Model Code Example: LOJAXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 154 of 357

MODELLOKA

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1SERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction andwill function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,✟ mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not AdjustableL Stroke Adjustment

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOKA

Model Code Example: LOKAXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 155 of 357

MODELLODB

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2SERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 2 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 2 to 1 direction andwill function as a check valve from 1 to 2. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 0,66 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LODB

Model Code Example: LODBXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 156 of 357

MODELLOFB

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2SERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 2 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 2 to 1 direction andwill function as a check valve from 1 to 2. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOFB

Model Code Example: LOFBXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 157 of 357

MODELLOHB

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2SERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 2 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 2 to 1 direction andwill function as a check valve from 1 to 2. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOHB

Model Code Example: LOHBXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 158 of 357

MODELLOJB

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2SERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 2 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 2 to 1 direction andwill function as a check valve from 1 to 2. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 6,✠ ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 99001✠007Seal kit - Cartridge Polyurethane: ✠✠001✠002Seal kit - Cartridge Viton: 99001✠006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOJB

Model Code Example: LOJBXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 159 of 357

MODELLOKB

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2SERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and haveport 2 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 2 to 1 direction andwill function as a check valve from 1 to 2. With port 3 vented, the valve will open provided there is sufficientpressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater thanthe sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,✡ mmSeal kit - Cartridge Buna: 99001✡007Seal kit - Cartridge Polyurethane: ✡✡001✡002Seal kit - Cartridge Viton: 99001✡006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOKB

Model Code Example: LOKBXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 160 of 357

MODELLODD

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2SERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed andincorporate an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilotsource. With port 3 blocked, the valve is held in the closed position by the spring force. With port 3 vented, thevalve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3,plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remainclosed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 0,99 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011009

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LODD

Model Code Example: LODDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 161 of 357

MODELLOFD

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2SERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed andincorporate an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilotsource. With port 3 blocked, the valve is held in the closed position by the spring force. With port 3 vented, thevalve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3,plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remainclosed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOFD

Model Code Example: LOFDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 162 of 357

MODELLOHD

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2SERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed andincorporate an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilotsource. With port 3 blocked, the valve is held in the closed position by the spring force. With port 3 vented, thevalve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3,plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remainclosed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOHD

Model Code Example: LOHDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 163 of 357

MODELLOJD

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2SERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed andincorporate an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilotsource. With port 3 blocked, the valve is held in the closed position by the spring force. With port 3 vented, thevalve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3,plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remainclosed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 6,☛ ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not AdjustableL Stroke Adjustment

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOJD

Model Code Example: LOJDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 164 of 357

MODELLOKD

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2SERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed andincorporate an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilotsource. With port 3 blocked, the valve is held in the closed position by the spring force. With port 3 vented, thevalve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3,plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remainclosed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Control Orifice Diameter 0,☞ mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKD

Model Code Example: LOKDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 165 of 357

MODELLODA8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 and integral T-8A control cavitySERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 1 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 0,66 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LODA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LODA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 166 of 357

MODELLOFA8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 and integral T-8A control cavitySERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 1 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOFA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOFA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 167 of 357

MODELLOHA8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 and integral T-8A control cavitySERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 1 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOHA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOHA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 168 of 357

MODELLOJA8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 and integral T-8A control cavitySERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 1 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement ✌,9 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOJA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOJA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 169 of 357

MODELLOKA8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 and integral T-8A control cavitySERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 1 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,✍ mmSeal kit - Cartridge Buna: ✍✍001✍007Seal kit - Cartridge Polyurethane: ✍✍001✍002Seal kit - Cartridge Viton: ✍✍001✍006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKA8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOKA8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 170 of 357

MODELLODB8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2 and integral T-8A control cavitySERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 2 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 0,66 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(D)BIAS PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LODB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LODB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 171 of 357

MODELLOFB8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2 and integral T-8A control cavitySERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 2 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOFB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOFB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 172 of 357

MODELLOHB8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2 and integral T-8A control cavitySERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 2 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LOHB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOHB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 173 of 357

MODELLOJB8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2 and integral T-8A control cavitySERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 2 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement ✎,9 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOJB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOJB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 174 of 357

MODELLOKB8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 2 and integral T-8A control cavitySERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

This valve is an unbalanced, vent-to-open, 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and uses port 2 as a pilot source. With a pilot 2-way valve in the closed position installed in theT-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element willopen providing there is a sufficient combination of pressures to overcome the spring force. The force generated atport 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve toremain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,✏ mmSeal kit - Cartridge Buna: ✏✏001✏007Seal kit - Cartridge Polyurethane: ✏✏001✏002Seal kit - Cartridge Viton: ✏✏001✏006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKB8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOKB8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 175 of 357

MODELCKBB

Pilot-to-open check valve with standard pilotCAPACITY: 30 L/min. / CAVITY: T-163A

This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows freeflow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportionalto the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990163007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)E 75 psi (5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKBB

Model Code Example: CKBBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 176 of 357

MODELCKBG

Flush mount pilot-to-open check valve with sealed pilotCAPACITY: 30 L/min. / CAVITY: T-163A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990163007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Not Adustable, Standard Hydraulic Pilot

(C)BIAS PRESSUREC 30 psi (2 bar)E 75 psi (5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CKBG

Model Code Example: CKBGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 177 of 357

MODELCKCB

Pilot-to-open check valve with standard pilotSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows freeflow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportionalto the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKCB

Model Code Example: CKCBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 178 of 357

MODELCKEB

Pilot-to-open check valve with standard pilotSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows freeflow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportionalto the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKEB

Model Code Example: CKEBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 179 of 357

MODELCKGB

Pilot-to-open check valve with standard pilotSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows freeflow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportionalto the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017009

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKGB

Model Code Example: CKGBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 180 of 357

MODELCKIB

Pilot-to-open check valve with standard pilotSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows freeflow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportionalto the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge EPDM: 990019014Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKIB

Model Code Example: CKIBXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 181 of 357

MODELLODD8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2 and integral T-8A control cavitySERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logicelement will remain in the closed position. With the pilot valve open, the logic element will open providing there is asufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the springforce, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE:The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 0,66 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LODD8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LODD8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 182 of 357

MODELLOFD8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2 and integral T-8A control cavitySERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logicelement will remain in the closed position. With the pilot valve open, the logic element will open providing there is asufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the springforce, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE:The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 1,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,53 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LOFD8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOFD8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 183 of 357

MODELLOHD8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2 and integral T-8A control cavitySERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logicelement will remain in the closed position. With the pilot valve open, the logic element will open providing there is asufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the springforce, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE:The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 4,1 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,8 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: ✑✑0017002Seal kit - Cartridge Viton: 990017006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LOHD8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOHD8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 184 of 357

MODELLOJD8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2 and integral T-8A control cavitySERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logicelement will remain in the closed position. With the pilot valve open, the logic element will open providing there is asufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the springforce, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE:The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 6,9 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,9 mmSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOJD8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOJD8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 185 of 357

MODELLOKD8

Vent-to-open, spring biased closed, unbalanced poppet logic element with pilotsource from port 1 or 2 and integral T-8A control cavitySERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It isspring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logicelement will remain in the closed position. With the pilot valve open, the logic element will open providing there is asufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the springforce, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE:The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Volume Displacement 7,7 ccArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Pilot Control Cavity T-8AControl Orifice Diameter 0,✒ mmSeal kit - Cartridge Buna: ✒✒001✒007Seal kit - Cartridge Polyurethane: ✒✒001✒002Seal kit - Cartridge Viton: ✒✒001✒006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKD8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: LOKD8DNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 186 of 357

MODELCKBD

Pilot-to-open check valve with sealed pilotCAPACITY: 30 L/min. / CAVITY: T-163A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990163007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)E 75 psi (5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKBD

Model Code Example: CKBDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 187 of 357

MODELCKCD

Pilot-to-open check valve with sealed pilotSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKCD

Model Code Example: CKCDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 188 of 357

MODELCKED

Pilot-to-open check valve with sealed pilotSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKED

Model Code Example: CKEDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 189 of 357

MODELCKGD

Pilot-to-open check valve with sealed pilotSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKGD

Model Code Example: CKGDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 190 of 357

MODELCKID

Pilot-to-open check valve with sealed pilotSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flowfrom the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) willopen the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to theload pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKID

Model Code Example: CKIDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 191 of 357

MODELLODO

Pilot-to-close, spring biased open, unbalanced poppet logic elementSERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-11A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 0,✓✓ ccPilot Passage into Valve 0,8 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LODO

Model Code Example: LODOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 192 of 357

MODELLOFO

Pilot-to-close, spring biased open, unbalanced poppet logic elementSERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 1,1 ccPilot Passage into Valve 0,✔ mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: ✔✔0202007Seal kit - Cartridge Polyurethane: ✔✔0002002Seal kit - Cartridge Viton: ✔✔020200✕

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOFO

Model Code Example: LOFOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 193 of 357

MODELLOHO

Pilot-to-close, spring biased open, unbalanced poppet logic elementSERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 4,1 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOHO

Model Code Example: LOHOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 194 of 357

MODELLOJO

Pilot-to-close, spring biased open, unbalanced poppet logic elementSERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 6,✖ ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: ✖✖001✖007Seal kit - Cartridge EPDM: ✖✖001✖014Seal kit - Cartridge Polyurethane: ✖✖001✖002Seal kit - Cartridge Viton: ✖✖001✖006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOJO

Model Code Example: LOJOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 195 of 357

MODELLOKO

Pilot-to-close, spring biased open, unbalanced poppet logic elementSERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.Pilot Volume Displacement 7,7 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LOKO

Model Code Example: LOKOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 196 of 357

MODELCVCV

Vented pilot-to-open check valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will openthe valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressureat port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port4).

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CVCV

Model Code Example: CVCVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 197 of 357

MODELCVEV

Vented pilot-to-open check valveSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will openthe valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressureat port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port4).

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CVEV

Model Code Example: CVEVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 198 of 357

MODELCVGV

Vented pilot-to-open check valveSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will openthe valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressureat port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port4).

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CVGV

Model Code Example: CVGVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 199 of 357

MODELCVIV

Vented pilot-to-open check valveSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will openthe valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressureat port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port4).

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 4,9 ccPilot Passage into Valve 2,3 mmSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge EPDM: 990024014Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(X)CONTROLX Standard PilotL Manual Load Release

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CVIV

Model Code Example: CVIVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 200 of 357

MODELLOFOZ

Pilot-to-close, spring biased open, unbalanced poppet logic element withposition switchSERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

This valve incorporates a position switch to provide confirmation that the valve is spring biased to the fully openposition.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 1,1 ccPilot Passage into Valve 0,6 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 660202007Seal kit - Cartridge Polyurethane: 660002002Seal kit - Cartridge Viton: 660202006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOFOZ

Model Code Example: LOFOZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 201 of 357

MODELLOHOZ

Pilot-to-close, spring biased open, unbalanced poppet logic element withposition switchSERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

This valve incorporates a position switch to provide confirmation that the valve is spring biased to the fully openposition.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 4,1 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990117006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOHOZ

Model Code Example: LOHOZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 202 of 357

MODELLOJOZ

Pilot-to-close, spring biased open, unbalanced poppet logic element withposition switchSERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

This valve incorporates a position switch to provide confirmation that the valve is spring biased to the fully openposition.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement ✗,✘ ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: ✘✘001✘007Seal kit - Cartridge Polyurethane: ✘✘001✘002Seal kit - Cartridge Viton: ✘✘001✘006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOJOZ

Model Code Example: LOJOZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 203 of 357

MODELLOKOZ

Pilot-to-close, spring biased open, unbalanced poppet logic element withposition switchSERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressureat either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The forcegenerated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force forthe valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

This valve incorporates a position switch to provide confirmation that the valve is spring biased to the fully openposition.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 7,7 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKOZ

Model Code Example: LOKOZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 204 of 357

MODELCKCV

Vented pilot-to-open check valve - atmospherically referencedSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) pilot portwill open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the loadpressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced out theback of the hex body.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990311007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990311006

(X)CONTROLX Standard Pilot, Atmospheric VentS External 4-SAE Vent Port

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CKCV

Model Code Example: CKCVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 205 of 357

MODELCKEV

Vented pilot-to-open check valve - atmospherically referencedSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) pilot portwill open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the loadpressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced out theback of the hex body.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Standard Pilot, Atmospheric VentS External 4-SAE Vent Port

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CKEV

Model Code Example: CKEVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 206 of 357

MODELCKGV

Vented pilot-to-open check valve - atmospherically referencedSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) pilot portwill open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the loadpressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced out theback of the hex body.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Standard Pilot, Atmospheric VentS External 4-SAE Vent Port

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CKGV

Model Code Example: CKGVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 207 of 357

MODELCKIV

Vented pilot-to-open check valve - atmospherically referencedSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow fromthe valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) pilot portwill open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the loadpressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced out theback of the hex body.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Standard Pilot, Atmospheric VentS External 4-SAE Vent Port

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CKIV

Model Code Example: CKIVXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 208 of 357

MODELCNCE

Pilot-to-open check valve with bypass orificeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

This valve is a pilot to open check valve with a bypass orifice. It incorporates a sealed pilot, a steel seat, and isnon-vented. It allows free flow from the valve (port 2) to the load (port 1) and restricts flow in the opposite direction.Pressure at the pilot (port 3) will open the valve from port 1 to port 2. The pilot pressure needed at port 3 to openthe valve is directly proportional to the load pressure at port 1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barOrifice Range 0,4 - 3,9 mmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.153 in. (0,4 - 3,9 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .153 in. (0,4 - 3,9 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.153 in. (0,4 - 3,9 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .153 in. (0,4 - 3,9 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.153 in. (0,4 - 3,9 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .153 in. (0,4 - 3,9 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNCE

Model Code Example: CNCEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 209 of 357

MODELCNEE

Pilot-to-open check valve with bypass orificeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

This valve is a pilot to open check valve with a bypass orifice. It incorporates a sealed pilot, a steel seat, and isnon-vented. It allows free flow from the valve (port 2) to the load (port 1) and restricts flow in the opposite direction.Pressure at the pilot (port 3) will open the valve from port 1 to port 2. The pilot pressure needed at port 3 to openthe valve is directly proportional to the load pressure at port 1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barOrifice Range 0,4 - 3,4 mmSeal kit - Cartridge Buna: ✙✙0202007Seal kit - Cartridge Polyurethane: ✙✙0002002Seal kit - Cartridge Viton: ✙✙0202006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.135 in. (0,4 - 3,4 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .135 in. (0,4 - 3,4 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.135 in. (0,4 - 3,4 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .135 in. (0,4 - 3,4 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.135 in. (0,4 - 3,4 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .135 in. (0,4 - 3,4 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNEE

Model Code Example: CNEEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 210 of 357

MODELCNGE

Pilot-to-open check valve with bypass orificeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

This valve is a pilot to open check valve with a bypass orifice. It incorporates a sealed pilot, a steel seat, and isnon-vented. It allows free flow from the valve (port 2) to the load (port 1) and restricts flow in the opposite direction.Pressure at the pilot (port 3) will open the valve from port 1 to port 2. The pilot pressure needed at port 3 to openthe valve is directly proportional to the load pressure at port 1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range. An 'L' control option is available to manually release the load. See Option Selection below.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barOrifice Range 0,4 - 5,5 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .218 in. (0,4 - 5,5 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNGE

Model Code Example: CNGEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 211 of 357

MODELLKDC

Pilot-to-open, spring biased closed, unbalanced poppet logic elementSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@70 barPilot Volume Displacement 0,33 ccPilot Passage into Valve 0,8 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LKDC

Model Code Example: LKDCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 212 of 357

MODELLKFC

Pilot-to-open, spring biased closed, unbalanced poppet logic elementSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-2A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@70 barPilot Volume Displacement 0,98 ccPilot Passage into Valve 0,9 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/LKFC

Model Code Example: LKFCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 213 of 357

MODELLKHC

Pilot-to-open, spring biased closed, unbalanced poppet logic elementSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@70 barPilot Volume Displacement 2,5 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LKHC

Model Code Example: LKHCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 214 of 357

MODELLKJC

Pilot-to-open, spring biased closed, unbalanced poppet logic elementSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-19A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@70 barPilot Volume Displacement 4,9 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge EPDM: 990019014Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/LKJC

Model Code Example: LKJCXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 215 of 357

MODELLKFCZ

Pilot-to-open, spring biased closed, unbalanced poppet logic element withposition switchSERIES 2 / CAPACITY: 80 L/min. / CAVITY: T-2A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 0,98 ccPilot Passage into Valve 0,9 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LKFCZ

Model Code Example: LKFCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 216 of 357

MODELLKHCZ

Pilot-to-open, spring biased closed, unbalanced poppet logic element withposition switchSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-17A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 2,5 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge EPDM: 990017014Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/LKHCZ

Model Code Example: LKHCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 217 of 357

MODELLKJCZ

Pilot-to-open, spring biased closed, unbalanced poppet logic element withposition switchSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-19A

These unbalanced poppet, logic valves are 2-way switching elements that are spring-biased closed. Pressure ateither work port 1 or 2 will further bias the valve to the closed position while pressure at port 3 will tend to open it.The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the springforce for the valve to open. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area atport 2.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 4,9 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)MINIMUM PILOT PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LKJCZ

Model Code Example: LKJCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 218 of 357

MODELLOFCZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withposition switchSERIES 2 / CAPACITY: 200 L/min. / CAVITY: T-2A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 1,1 ccPilot Passage into Valve 0,9 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)NOMINAL CONTROL PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOFCZ

Model Code Example: LOFCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 219 of 357

MODELLOHCZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withposition switchSERIES 3 / CAPACITY: 380 L/min. / CAVITY: T-17A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 4,1 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOHCZ

Model Code Example: LOHCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 220 of 357

MODELLOJCZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withposition switchSERIES 4 / CAPACITY: 760 L/min. / CAVITY: T-19A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement ✚,9 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOJCZ

Model Code Example: LOJCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 221 of 357

MODELLOKCZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withposition switchSERIES 4 / CAPACITY: 1100 L/min. / CAVITY: T-19AU

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 7,7 ccPilot Passage into Valve 2,3 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(D)CRACKING PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOKCZ

Model Code Example: LOKCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 222 of 357

MODELLOECZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withmetering notches and position switchSERIES 2 / CAPACITY: 45 L/min. / CAVITY: T-2A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 1,1 ccPilot Passage into Valve 0,9 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(D)NOMINAL CONTROL PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOECZ

Model Code Example: LOECZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 223 of 357

MODELLOGCZ

Pilot-to-close, spring biased closed, unbalanced poppet logic element withmetering notches and position switchSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-17A

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased closed. Pressureat either work port 1 or 2 will oppose the spring and tend to open the valve while pressure at port 3 will tend toclose it. The force generated by the pressure at port 3, plus the spring force, must be greater than the sum of theforces generated by the pressures at ports 1 and 2 for the valve to remain closed.

This valve incorporates a position switch to provide confirmation that the valve is closed.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Pilot Volume Displacement 4,1 ccPilot Passage into Valve 1,50 mmArea Ratio, A3 to A1 1.8:1Area Ratio, A3 to A2 2.25:1Transition leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(D)NOMINAL CONTROL PRESSURED 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/LOGCZ

Model Code Example: LOGCZDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 224 of 357

MODELDKDR8

Normally closed, balanced poppet, logic element with integral T-8A controlcavity - vent-to-openSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally closed, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains closed. Opening the 2-wayvalve shifts the poppet to the open position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKDR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DKDR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 225 of 357

MODELDKFR8

Normally closed, balanced poppet, logic element with integral T-8A controlcavity - vent-to-openSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally closed, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains closed. Opening the 2-wayvalve shifts the poppet to the open position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKFR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DKFR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 226 of 357

MODELDKHR8

Normally closed, balanced poppet, logic element with integral T-8A controlcavity - vent-to-openSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally closed, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains closed. Opening the 2-wayvalve shifts the poppet to the open position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(H)MINIMUM CONTROL PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKHR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DKHR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 227 of 357

MODELDKJR8

Normally closed, balanced poppet, logic element with integral T-8A controlcavity - vent-to-openSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally closed, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains closed. Opening the 2-wayvalve shifts the poppet to the open position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(H)MINIMUM CONTROL PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKJR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DKJR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 228 of 357

MODELCOBA

Pilot-to-close check valveCAPACITY: 40 L/min. / CAVITY: T-163A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 3:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of 3:1.This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 3:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990163007Seal kit - Cartridge EPDM: 990163014Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Standard PilotB External 1/4 BSPP Pilot Port, Port 3

blocked

(C)CRACKING PRESSUREC 30 psi (2 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/COBA

Model Code Example: COBAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 229 of 357

MODELCOBG

Pilot-to-close check valveCAPACITY: 40 L/min. / CAVITY: T-163A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990163007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Not Adustable, Standard Hydraulic Pilot

(C)CRACKING PRESSUREC 30 psi (2 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/COBG

Model Code Example: COBGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 230 of 357

MODELCODA

Pilot-to-close check valveSERIES 1 / CAPACITY: 80 L/min. / CAVITY: T-11A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Standard Pilot

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CODA

Model Code Example: CODAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 231 of 357

MODELCOFA

Pilot-to-close check valveSERIES 2 / CAPACITY: 160 L/min. / CAVITY: T-2A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge EPDM: 990202014Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Standard Pilot

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)J 135 psi (9,5 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/COFA

Model Code Example: COFAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 232 of 357

MODELCOHA

Pilot-to-close check valveSERIES 3 / CAPACITY: 320 L/min. / CAVITY: T-17A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017006

(X)CONTROLX Standard Pilot

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/COHA

Model Code Example: COHAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 233 of 357

MODELCOJA

Pilot-to-close check valveSERIES 4 / CAPACITY: 610 L/min. / CAVITY: T-19A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Standard Pilot

(C)CRACKING PRESSUREC 30 psi (2 bar)A 4 psi (0,3 bar)B 15 psi (1 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/COJA

Model Code Example: COJAXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 234 of 357

MODELCOKA

Pilot-to-close check valveSERIES 4 / CAPACITY: 900 L/min. / CAVITY: T-19AU

This valve is a spring biased closed, pilot-to-close check cartridge that has a 1.8:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot port opposes pressure at port 1 at a ratio of1.8:1. This valve is most often used in regeneration circuits.

TECHNICAL DATAPilot Ratio 1.8:1Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990019007Seal kit - Cartridge Polyurethane: 990019002Seal kit - Cartridge Viton: 990019006

(X)CONTROLX Not Adjustable

(A)CRACKING PRESSUREA 4 psi (0,3 bar)B 15 psi (1 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/COKA

Model Code Example: COKAXANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 235 of 357

MODELDKDP

Normally closed, balanced poppet, logic element - pressure adjustableSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally closed, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains closed until the pilot pressure reaches the setting established by the integral pilot relief stage, at whichpoint the poppet shifts to the open position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 400 - 3000 psi (28 - 210 bar), 1000 psi

(70 bar) Standard SettingB 400 - 1500 psi (28 - 105 bar), 1000 psi

(70 bar) Standard SettingW 400 - 4500 psi (28 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DKDP

Model Code Example: DKDPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 236 of 357

MODELDKFP

Normally closed, balanced poppet, logic element - pressure adjustableSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally closed, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains closed until the pilot pressure reaches the setting established by the integral pilot relief stage, at whichpoint the poppet shifts to the open position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory Set

(A)ADJUSTMENT RANGEA 250 - 3000 psi (18 - 210 bar), 1000 psi

(70 bar) Standard SettingB 250 - 1500 psi (18 - 105 bar), 1000 psi

(70 bar) Standard SettingW 250 - 4500 psi (18 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKFP

Model Code Example: DKFPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 237 of 357

MODELDKHP

Normally closed, balanced poppet, logic element - pressure adjustableSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally closed, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains closed until the pilot pressure reaches the setting established by the integral pilot relief stage, at whichpoint the poppet shifts to the open position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 200 - 3000 psi (14 - 210 bar), 1000 psi

(70 bar) Standard SettingB 200 - 1500 psi (14 - 105 bar), 1000 psi

(70 bar) Standard SettingD 200 - 800 psi (14 - 55 bar), 400 psi (28

bar) Standard SettingW 200 - 4500 psi (14 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DKHP

Model Code Example: DKHPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 238 of 357

MODELDKJP

Normally closed, balanced poppet, logic element - pressure adjustableSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally closed, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains closed until the pilot pressure reaches the setting established by the integral pilot relief stage, at whichpoint the poppet shifts to the open position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 200 - 3000 psi (14 - 210 bar), 1000 psi

(70 bar) Standard SettingB 200 - 1500 psi (14 - 105 bar), 1000 psi

(70 bar) Standard SettingW 200 - 4500 psi (14 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DKJP

Model Code Example: DKJPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 239 of 357

MODELCNFE

Pilot-to-close check valve with bypass orificeSERIES 2 / CAPACITY: 160 L/min. / CAVITY: T-2A

This valve is a spring biased closed, pilot-to-close check cartridge with a bypass orifice. It incorporates a steel seatand is non-vented. The valve allows flow from port 1 to port 2 and restricts flow from port 2 to port 1. Pressure atthe pilot (port 3) opposes pressure at port 1 at a ratio of 1.8:1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range.

TECHNICAL DATAPilot Ratio 1.8:1Orifice Range 0,4 - 3,2 mmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .127 in. (0,4 - 3,2 mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .127 in. (0,4 - 3,2 mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)F 100 psi (7 bar) Cracking Pressure, .016

- .127 in. (0,4 - 3,2 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNFE

Model Code Example: CNFEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 240 of 357

MODELCNHE

Pilot-to-close check valve with bypass orificeSERIES 3 / CAPACITY: 320 L/min. / CAVITY: T-17A

This valve is a spring biased closed, pilot-to-close check cartridge with a bypass orifice. It incorporates a steel seatand is non-vented. The valve allows flow from port 1 to port 2 and restricts flow from port 2 to port 1. Pressure atthe pilot (port 3) opposes pressure at port 1 at a ratio of 1.8:1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range.

TECHNICAL DATAOrifice Range 0,4 - ✛,4 mmSeal kit - Cartridge Buna: 990017007Seal kit - Cartridge Polyurethane: 990017002Seal kit - Cartridge Viton: 990017009

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)A 4 psi (0,3 bar) Cracking Pressure, .019

- .252 in. (0,4 - 9,4 mm)B 15 psi (1 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)D 50 psi (3,5 bar) Cracking Pressure,

.019 - .252 in. (0,4 - 9,4 mm)E 75 psi (5 bar) Cracking Pressure, .019 -

.252 in. (0,4 - 9,4 mm)F 100 psi (7 bar) Cracking Pressure, .019

- .252 in. (0,4 - 9,4 mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNHE

Model Code Example: CNHEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 241 of 357

MODELCNJE

Pilot-to-close check valve with bypass orificeSERIES 4 / CAPACITY: 610 L/min. / CAVITY: T-19A

This valve is a spring biased closed, pilot-to-close check cartridge with a bypass orifice. It incorporates a steel seatand is non-vented. The valve allows flow from port 1 to port 2 and restricts flow from port 2 to port 1. Pressure atthe pilot (port 3) opposes pressure at port 1 at a ratio of 1.8:1. Pressure at port 2 directly opposes the pilotpressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for theallowable orifice range.

TECHNICAL DATAOrifice Range 0,4 - ✜ mmSeal kit - Cartridge Buna: ✜✜001✜007Seal kit - Cartridge Polyurethane: ✜✜001✜002Seal kit - Cartridge Viton: ✜✜001✜006

(X)CONTROLX Not Adjustable

(C)SETTING RANGEC 30 psi (2 bar) Cracking Pressure, .016 -

.354 in. (0,4 - ✜ mm)A 4 psi (0,3 bar) Cracking Pressure, .016

- .354 in. (0,4 - ✜ mm)B 15 psi (1 bar) Cracking Pressure, .016 -

.354 in. (0,4 - ✜ mm)D 50 psi (3,5 bar) Cracking Pressure,

.016 - .354 in. (0,4 - ✜ mm)E 75 psi (5 bar) Cracking Pressure, .016 -

.354 in. (0,4 - ✜ mm)F 100 psi (7 bar) Cracking Pressure, .016

- .354 in. (0,4 - ✜ mm)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CNJE

Model Code Example: CNJEXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 242 of 357

MODELCODD

20:1 ratio, pilot-to-close check valveSERIES 1 / CAPACITY: 2,8 mm / CAVITY: T-11A

This valve is a spring biased closed, pilot-to-close check cartridge that has a 20:1 pilot ratio. The valve allows flowfrom port 1 to port 2 and blocks reverse flow. Pressure at the pilot (port 3) opposes pressure at port 1 at a ratio of20:1.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Standard Pilot

(D)CRACKING PRESSURED 50 psi (3,5 bar)H 200 psi (14 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CODD

Model Code Example: CODDXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 243 of 357

MODELCOFO

120:1 ratio, pilot-to-close check valveSERIES 2 / CAPACITY: 1,27 mm / CAVITY: T-2A

This valve is a pilot-to-close check cartridge that has a 120:1 pilot ratio. The valve is designed specifically todischarge an accumulator when the pump is turned off. With no pressure at the pump port (port 3), the valve isopen between the accumulator (port 1) and tank (port 2). 60 psi (4 bar) at port 3 will close the valve for accumulatorpressures up to 5000 psi (350 bar). When pump pressure at port 3 is below 300 psi (20 bar) there is a leak pathfrom port 3 to tank (port 2) to ensure accumulator discharge when the pump is turned off. When pump pressure isabove 300 psi (20 bar) the leak path closes for efficiency.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(X)CONTROLX Standard Pilot

(D)MINIMUM PILOT PRESSURED 60 psi (4 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/COFO

Model Code Example: COFOXDNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 244 of 357

MODELDODR8

Normally open, balanced poppet, logic element with integral T-8A control cavity- vent-to-closeSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally open, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains open. Opening the 2-way valveshifts the poppet to the closed position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(H)MINIMUM PILOT PRESSUREH 400 psi (28 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DODR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DODR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 245 of 357

MODELDOFR8

Normally open, balanced poppet, logic element with integral T-8A control cavity- vent-to-closeSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally open, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains open. Opening the 2-way valveshifts the poppet to the closed position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOFR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DOFR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 246 of 357

MODELDOHR8

Normally open, balanced poppet, logic element with integral T-8A control cavity- vent-to-closeSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally open, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains open. Opening the 2-way valveshifts the poppet to the closed position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(H)MINIMUM PILOT PRESSUREH 200 psi (14 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOHR8

Model Code Example: DOHR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 247 of 357

MODELDOJR8

Normally open, balanced poppet, logic element with integral T-8A control cavity- vent-to-closeSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally open, balanced poppet, switching element with an integral T-8A control cavity. With a 2-wayvalve in the closed position installed in the T-8A control cavity, the poppet remains open. Opening the 2-way valveshifts the poppet to the closed position, provided there is sufficient pressure at port 3.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barPilot Control Cavity T-8APilot Control Valve Installation Torque 27 - 33 NmPilot Control Valve Hex Size 22,2 mmSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(H)MINIMUM PILOT PRESSUREH 300 psi (20 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DOJR8

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DOJR8HNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 248 of 357

MODELFTCK

3-way, 3-position, proportional directional valve with center bleed down and loadsenseSERIES 2 / CAPACITY: 28 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Load sense is available at port 5 when the spool is shifted to either port 2 or 4.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTCK

Model Code Example: FTCKXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 249 of 357

MODELFTDK

3-way, 3-position, proportional directional valve with center bleed down and loadsenseSERIES 2 / CAPACITY: 70 L/min. / CAVITY: T-52A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Load sense is available at port 5 when the spool is shifted to either port 2 or 4.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTDK

Model Code Example: FTDKXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 250 of 357

MODELFTEK

3-way, 3-position, proportional directional valve with center bleed down and loadsenseSERIES 3 / CAPACITY: 60 L/min. / CAVITY: T-53A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Load sense is available at port 5 when the spool is shifted to either port 2 or 4.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 3,5 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTEK

Model Code Example: FTEKXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 251 of 357

MODELFTFK

3-way, 3-position, proportional directional valve with center bleed down and loadsenseSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-53A

This valve is a 3-way, 3-position proportional directional valve. Port 3 is closed in the center position and port 2 andport 4 are drained to port 1. Pilot pressure at port 1 creates a metering orifice between ports 3 and 4 that isproportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilotpressure results in a degree of partial self-compensation as the load pressure changes.

Load sense is available at port 5 when the spool is shifted to either port 2 or 4.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 4 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Normally Closed

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/FTFK

Model Code Example: FTFKXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 252 of 357

MODELDODP

Normally open, balanced poppet, logic element - pressure adjustableSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-21A

This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which pointthe poppet shifts to the closed position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 28 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 400 - 3000 psi (28 - 210 bar), 1000 psi

(70 bar) Standard SettingB 400 - 1500 psi (28 - 105 bar), 1000 psi

(70 bar) Standard SettingW 400 - 4500 psi (28 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DODP

Model Code Example: DODPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 253 of 357

MODELDOFP

Normally open, balanced poppet, logic element - pressure adjustableSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which pointthe poppet shifts to the closed position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw Adjustment

(A)ADJUSTMENT RANGEA 200 - 3000 psi (14 - 210 bar), 1000 psi

(70 bar) Standard SettingB 200 - 1500 psi (14 - 105 bar), 1000 psi

(70 bar) Standard SettingW 200 - 4500 psi (14 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DOFP

Model Code Example: DOFPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 254 of 357

MODELDOHP

Normally open, balanced poppet, logic element - pressure adjustableSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-23A

This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which pointthe poppet shifts to the closed position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990023007Seal kit - Cartridge Polyurethane: 990023002Seal kit - Cartridge Viton: 990023006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 200 - 3000 psi (14 - 210 bar), 1000 psi

(70 bar) Standard SettingB 200 - 1500 psi (14 - 105 bar), 1000 psi

(70 bar) Standard SettingW 200 - 4500 psi (14 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DOHP

Model Code Example: DOHPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 255 of 357

MODELDOJP

Normally open, balanced poppet, logic element - pressure adjustableSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-24A

This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppetremains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which pointthe poppet shifts to the closed position.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barMaximum Operating Pressure 350 barControl Pilot Flow See Performance DataMaximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 barLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990024007Seal kit - Cartridge Polyurethane: 990024002Seal kit - Cartridge Viton: 990024006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 200 - 3000 psi (14 - 210 bar), 1000 psi

(70 bar) Standard SettingB 200 - 1500 psi (14 - 105 bar), 1000 psi

(70 bar) Standard SettingD 200 - 800 psi (14 - 55 bar)W 200 - 4500 psi (14 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DOJP

Model Code Example: DOJPLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 256 of 357

MODELCSAA

Single ball shuttle valve with signal externalSERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-13A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atan external port located in the hex-end of the cartridge.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(E)CONTROLE External 4-SAE PortB External 1/4 BSPP Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CSAA

Model Code Example: CSAAEXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 257 of 357

MODELCSAW

Single ball shuttle valve with signal externalCAPACITY: 4,7 L/min. / CAVITY: T-162A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atan external port located in the hex-end of the cartridge.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 9901✢2007Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(B)CONTROLB External 1/4 BSPP PortE External 4-SAE Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CSAW

Model Code Example: CSAWBXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 258 of 357

MODELCSAC

Single ball shuttle valve with signal at port 2SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-13A

The single ball shuttle connects the higher of two work ports to the signal or common port. It features an externalload port located in the hex-end of the cartridge and the signal is sensed at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(B)CONTROLB External 1/4 BSPP PortE External 4-SAE Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CSAC

Model Code Example: CSACBXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 259 of 357

MODELCSAD

Single ball shuttle valve with signal at port 2SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-11A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not AdjustableA Auxiliary External -4 SAE PortB Auxiliary External 1/4 BSPP Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CSAD

Model Code Example: CSADXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 260 of 357

MODELCSAY

Single ball shuttle valve with signal at port 2CAPACITY: 4,7 L/min. / CAVITY: T-162A

The single ball shuttle connects the higher of two work ports to the signal or common port. It features an externalload port located in the hex-end of the cartridge and the signal is sensed at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 660162007Seal kit - Cartridge Polyurethane: 660162002Seal kit - Cartridge Viton: 660162006

(B)CONTROLB External 1/4 BSPP PortE External 4-SAE Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/CSAY

Model Code Example: CSAYBXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 261 of 357

MODELCSAZ

Single ball shuttle valve with signal at port 2CAPACITY: 4,7 L/min. / CAVITY: T-163A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 9901✣3007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Not Adjustable

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CSAZ

Model Code Example: CSAZXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 262 of 357

MODELCDAA

Back-to-back check/shuttle valve with signal externalSERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-13A

The back-to-back check valve combines two simple check valves into a single cartridge. It connects the higher oftwo work ports to the signal or common port. The signal is sensed at an external port located in the hex-end of thecartridge.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(B)CONTROLB External 1/4 BSPP PortE External 4-SAE Port

(B)CRACKING PRESSUREB 15 psi (1 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CDAA

Model Code Example: CDAABBNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 263 of 357

MODELCDAC

Back-to-back check/shuttle valve with signal at port 2SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-13A

The back-to-back check valve combines two simple check valves into a single cartridge. It connects the higher oftwo work ports to the signal or common port. It features an external load port located in the hex-end of the cartridgeand the signal is sensed at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990010007Seal kit - Cartridge Polyurethane: 990010002Seal kit - Cartridge Viton: 990010006

(B)CONTROLB External 1/4 BSPP PortE External 4-SAE Port

(B)CRACKING PRESSUREB 15 psi (1 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CDAC

Model Code Example: CDACBBNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 264 of 357

MODELCDAD

Back-to-back check/shuttle valve with signal at port 2SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-11A

The back-to-back check valve combines two simple check valves into a single cartridge. It connects the work portwith the higher pressure to the signal or common port. The signal is sensed at port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not Adjustable

(B)CRACKING PRESSUREB 15 psi (1 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CDAD

Model Code Example: CDADXBNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 265 of 357

MODELCSAB

Single ball shuttle valve with signal at port 3SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-11A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge EPDM: 990011014Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not AdjustableA Auxiliary External -4 SAE PortB Auxiliary External 1/4 BSPP Port

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CSAB

Model Code Example: CSABXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 266 of 357

MODELCSAX

Single ball shuttle valve with signal at port 3CAPACITY: 4,7 L/min. / CAVITY: T-163A

The single ball shuttle connects the higher of two work ports to the signal or common port. The signal is sensed atport 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990163007Seal kit - Cartridge Polyurethane: 990163002Seal kit - Cartridge Viton: 990163006

(X)CONTROLX Not Adjustable

(X)ADJUSTMENT RANGEX -

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CSAX

Model Code Example: CSAXXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 267 of 357

MODELCDAB

Back-to-back check/shuttle valve with signal at port 3SERIES 1 / CAPACITY: 10 L/min. / CAVITY: T-11A

The back-to-back check valve combines two simple check valves into a single cartridge. It connects the work portwith the higher pressure to the signal or common port. The signal is sensed at port 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.Seal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(X)CONTROLX Not AdjustableA Auxiliary External -4 SAE PortB Auxiliary External 1/4 BSPP Port

(B)CRACKING PRESSUREB 15 psi (1 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/CDAB

Model Code Example: CDABXBNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 268 of 357

MODELDSCH

Low side, 3-position, hot oil shuttle valveSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-31A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,38 L/min.Seal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(H)SHIFTING PRESSUREH 200 psi (14 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSCH

Model Code Example: DSCHXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 269 of 357

MODELDSEH

Low side, 3-position, hot oil shuttle valveSERIES 2 / CAPACITY: 80 L/min. / CAVITY: T-32A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,38 L/min.Seal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(H)SHIFTING PRESSUREH 200 psi (14 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DSEH

Model Code Example: DSEHXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 270 of 357

MODELDSGH

Low side, 3-position, hot oil shuttle valveSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-33A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,75 L/min.Seal kit - Cartridge Buna: 990033007Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(H)SHIFTING PRESSUREH 200 psi (14 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DSGH

Model Code Example: DSGHXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 271 of 357

MODELDSIH

Low side, 3-position, hot oil shuttle valveSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-34A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,75 L/min.Seal kit - Cartridge Buna: 990034007Seal kit - Cartridge Polyurethane: 990034002Seal kit - Cartridge Viton: 990034006

(X)CONTROLX Not Adjustable

(H)SHIFTING PRESSUREH 200 psi (14 bar)G 150 psi (10,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DSIH

Model Code Example: DSIHXHNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 272 of 357

MODELDSDD

Low side, 3-position, hot oil shuttle valve with delayed shiftSERIES 2 / CAPACITY: 80 L/min. / CAVITY: T-32A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3). The delay shift shuttle prevents flow transients downstream of the hot oil circuit.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,38 L/min.Seal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DSDD

Model Code Example: DSDDXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 273 of 357

MODELDSFD

Low side, 3-position, hot oil shuttle valve with delayed shiftSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-33A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3). The delay shift shuttle prevents flow transients downstream of the hot oil circuit.

TECHNICAL DATAMaximum Operating Pressure 350 barPilot Flow 0,38 L/min.Seal kit - Cartridge Buna: 990033007Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(E)SHIFTING PRESSUREE 75 psi (5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DSFD

Model Code Example: DSFDXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 274 of 357

MODELDSCL

Direct-acting, low side, 3-position, shuttle valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-31A

Low-side (hot oil) shuttle cartridges allow hot oil to be diverted from the low pressure side of a closed loop system.When both work ports (ports 2 and 4) are at equal pressures the valve is spring-centered to an all-ports-blockedposition. When one of the work ports (port 2 or 4) sees a higher pressure the opposite work port is connected to thecommon port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barSeal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(G)SHIFTING PRESSUREG 150 psi (10,5 bar)C 30 psi (2 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSCL

Model Code Example: DSCLXGNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 275 of 357

MODELDSCS

High side, 3-position, shuttle valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-31A

High-side shuttle cartridges are most often used in full-time regeneration circuits. When both work ports (ports 2and 4) are at equal pressures the valve is spring-centered to an all-ports-blocked position. When one of the workports (port 2 or 4) sees a higher pressure it is connected to the common port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barSeal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(G)SHIFTING PRESSUREG 150 psi (10,5 bar)C 30 psi (2 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSCS

Model Code Example: DSCSXGNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 276 of 357

MODELDSES

High side, 3-position, shuttle valveSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-32A

High-side shuttle cartridges are most often used in full-time regeneration circuits. When both work ports (ports 2and 4) are at equal pressures the valve is spring-centered to an all-ports-blocked position. When one of the workports (port 2 or 4) sees a higher pressure it is connected to the common port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 50 cc/min.@70 barSeal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(G)SHIFTING PRESSUREG 150 psi (10,5 bar)C 30 psi (2 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSES

Model Code Example: DSESXGNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 277 of 357

MODELDSGS

High side, 3-position, shuttle valveSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-33A

High-side shuttle cartridges are most often used in full-time regeneration circuits. When both work ports (ports 2and 4) are at equal pressures the valve is spring-centered to an all-ports-blocked position. When one of the workports (port 2 or 4) sees a higher pressure it is connected to the common port (port 3).

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 65 cc/min.@70 barSeal kit - Cartridge Buna: 990033007Seal kit - Cartridge EPDM: 990033014Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(G)SHIFTING PRESSUREG 150 psi (10,5 bar)C 30 psi (2 bar)E 75 psi (5 bar)F 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DSGS

Model Code Example: DSGSXGNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 278 of 357

MODELDSIS

High side, 3-position, shuttle valveSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-34A

High-side shuttle cartridges are most often used in full-time regeneration circuits. When both work ports (ports 2and 4) are at equal pressures the valve is spring-centered to an all-ports-blocked position. When one of the workports (port 2 or 4) sees a higher pressure it is connected to the common port (port 3).

TYCHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@70 barSeal kit - Cartridge Buna: 990034007Seal kit - Cartridge Polyurethane: 990034002Seal kit - Cartridge Viton: 990034006

(X)CONTROLX Not Adjustable

(G)SHIFTING PRYSSURYG 150 psi (10,5 bar)C 30 psi (2 bar)Y 75 psi (5 bar)F 100 psi (7 bar)

(N)SYAL MATYRIALN Buna-NV Viton

snhy.com/DSIS

Model Code Yxample: DSISXGNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 279 of 357

MODELDSCO

Spring offset, 2-position, high side shuttle valveSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-31A

Spring-offset, high-side shuttle cartridges are 2-position valves that have a normal (offset) position that connectsthe common port (port 3) to work port 4, with work port 2 blocked. When the pressure at port 2 rises above thepressure at port 4, the cartridge shifts to connect the common port to port 2 with port 4 then blocked.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barSeal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DSCO

Model Code Example: DSCOXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 280 of 357

MODELDSEO

Spring offset, 2-position, high side shuttle valveSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-32A

Spring-offset, high-side shuttle cartridges are 2-position valves that have a normal (offset) position that connectsthe common port (port 3) to work port 4, with work port 2 blocked. When the pressure at port 2 rises above thepressure at port 4, the cartridge shifts to connect the common port to port 2 with port 4 then blocked.

TECHNICAL DATAMaximum Operating Pressure 350 barSeal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DSEO

Model Code Example: DSEOXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 281 of 357

MODELDSGO

Spring offset, 2-position, high side shuttle valveSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-33A

Spring-offset, high-side shuttle cartridges are 2-position valves that have a normal (offset) position that connectsthe common port (port 3) to work port 4, with work port 2 blocked. When the pressure at port 2 rises above thepressure at port 4, the cartridge shifts to connect the common port to port 2 with port 4 then blocked.

TECHNICAL DATAMaximum Operating Pressure 350 barSeal kit - Cartridge Buna: 990033007Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSGO

Model Code Example: DSGOXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 282 of 357

MODELDSIO

Spring offset, 2-position, high side shuttle valveSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-34A

Spring-offset, high-side shuttle cartridges are 2-position valves that have a normal (offset) position that connectsthe common port (port 3) to work port 4, with work port 2 blocked. When the pressure at port 2 rises above thepressure at port 4, the cartridge shifts to connect the common port to port 2 with port 4 then blocked.

TECHNICAL DATAMaximum Operating Pressure 350 barSeal kit - Cartridge Buna: 990034007Seal kit - Cartridge Polyurethane: 990034002Seal kit - Cartridge Viton: 990034006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSIO

Model Code Example: DSIOXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 283 of 357

MODELDSC✤

3-way, 2-position, vent-to-shift diverter valve, normally openSERIES 1 / CAPACIT✥: 60 L/min. / CAVIT✥: T-31A

This vent-to-shift diverter valve is a 2-position, 3-way cartridge that is normally open from port 3 to port 4. Whenport 1 is vented, the pressure differential between port 3 and port 1 exceeds the spring force causing the valve toshift, thereby connecting port 3 to port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,38 L/min.Seal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSCY

Model Code Example: DSC✥XENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 284 of 357

MODELDSE✦

3-way, 2-position, vent-to-shift diverter valve, normally openSERIES 2 / CAPACIT✧: 120 L/min. / CAVIT✧: T-32A

This vent-to-shift diverter valve is a 2-position, 3-way cartridge that is normally open from port 3 to port 4. Whenport 1 is vented, the pressure differential between port 3 and port 1 exceeds the spring force causing the valve toshift, thereby connecting port 3 to port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,38 L/min.Seal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DSEY

Model Code Example: DSE✧XENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 285 of 357

MODELDSG★

3-way, 2-position, vent-to-shift diverter valve, normally openSERIES 3 / CAPACIT✩: 240 L/min. / CAVIT✩: T-33A

This vent-to-shift diverter valve is a 2-position, 3-way cartridge that is normally open from port 3 to port 4. Whenport 1 is vented, the pressure differential between port 3 and port 1 exceeds the spring force causing the valve toshift, thereby connecting port 3 to port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,60 L/min.Seal kit - Cartridge Buna: 990033007Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSGY

Model Code Example: DSG✩XENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 286 of 357

MODELDSI✪

3-way, 2-position, vent-to-shift diverter valve, normally openSERIES 4 / CAPACIT✫: 480 L/min. / CAVIT✫: T-34A

This vent-to-shift diverter valve is a 2-position, 3-way cartridge that is normally open from port 3 to port 4. Whenport 1 is vented, the pressure differential between port 3 and port 1 exceeds the spring force causing the valve toshift, thereby connecting port 3 to port 2.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,60 L/min.Seal kit - Cartridge Buna: 990034007Seal kit - Cartridge Polyurethane: 990034002Seal kit - Cartridge Viton: 990034006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DSIY

Model Code Example: DSI✫XENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 287 of 357

MODELDSCX

3-way, 2-position, vent-to-shift diverter valve, normally closedSERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-31A

This is a vent-to-shift, 2-position, diverter valve that is normally closed. When port 1 is vented, the pressuredifferential between port 3 and port 1 exceeds the spring force causing the valve to shift, thereby connecting port 3with ports 2 and 4.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,38 L/min.Seal kit - Cartridge Buna: 990031007Seal kit - Cartridge Polyurethane: 990031002Seal kit - Cartridge Viton: 990031006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSCX

Model Code Example: DSCXXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 288 of 357

MODELDSEX

3-way, 2-position, vent-to-shift diverter valve, normally closedSERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-32A

This is a vent-to-shift, 2-position, diverter valve that is normally closed. When port 1 is vented, the pressuredifferential between port 3 and port 1 exceeds the spring force causing the valve to shift, thereby connecting port 3with ports 2 and 4.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,38 L/min.Seal kit - Cartridge Buna: 990032007Seal kit - Cartridge Polyurethane: 990032002Seal kit - Cartridge Viton: 990032006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSEX

Model Code Example: DSEXXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 289 of 357

MODELDSGX

3-way, 2-position, vent-to-shift diverter valve, normally closedSERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-33A

This is a vent-to-shift, 2-position, diverter valve that is normally closed. When port 1 is vented, the pressuredifferential between port 3 and port 1 exceeds the spring force causing the valve to shift, thereby connecting port 3with ports 2 and 4.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,60 L/min.Seal kit - Cartridge Buna: 990033007Seal kit - Cartridge Polyurethane: 990033002Seal kit - Cartridge Viton: 990033006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSGX

Model Code Example: DSGXXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 290 of 357

MODELDSIX

3-way, 2-position, vent-to-shift diverter valve, normally closedSERIES 4 / CAPACITY: 480 L/min. / CAVITY: T-34A

This is a vent-to-shift, 2-position, diverter valve that is normally closed. When port 1 is vented, the pressuredifferential between port 3 and port 1 exceeds the spring force causing the valve to shift, thereby connecting port 3with ports 2 and 4.

TECHNICAL DATAMaximum Operating Pressure 350 barNominal Vent Flow 0,60 L/min.Seal kit - Cartridge Buna: 990034007Seal kit - Cartridge Polyurethane: 990034002Seal kit - Cartridge Viton: 990034006

(X)CONTROLX Not Adjustable

(E)MINIMUM CONTROL PRESSUREE 75 psi (5 bar)C 30 psi (2 bar)D 50 psi (3,5 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DSIX

Model Code Example: DSIXXENCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 291 of 357

MODELDDDG

3-way, 2-position, pilot-to-shift, directional valveSERIES 2 / CAPACITY: 80 L/min. / CAVITY: T-52A

X-Control, C-Spool X-Control, O-Spool

X-Control, R-Spool X-Control, Y-Spool

X-Control, Z-Spool

Two-position, 3-way directional cartridges are 6-port (port 5 is not used) directional valves that can be configuredwith up to 5 different spool configurations. The supply port is port 3 and all ports will accept 5000 psi (350 bar).Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 10 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Closed CrossoverO Open CrossoverR Restricted CrossoverY All Ports BlockedZ All Ports Open

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DDDG

Model Code Example: DDDGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 292 of 357

MODELDDFG

3-way, 2-position, pilot-to-shift, directional valveSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-53A

X-Control, C-Spool X-Control, O-Spool

X-Control, R-Spool X-Control, Y-Spool

X-Control, Z-Spool

Two-position, 3-way directional cartridges are 6-port (port 5 is not used) directional valves that can be configuredwith up to 5 different spool configurations. The supply port is port 3 and all ports will accept 5000 psi (350 bar).Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 11 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 2,1 ccSeal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Closed CrossoverO Open CrossoverR Restricted CrossoverY All Ports BlockedZ All Ports Open

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DDFG

Model Code Example: DDFGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 293 of 357

MODELDDHG

3-way, 2-position, pilot-to-shift, directional valveSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-54A

X-Control, C-Spool X-Control, O-Spool

X-Control, R-Spool X-Control, Y-Spool

X-Control, Z-Spool

Two-position, 3-way directional cartridges are 6-port (port 5 is not used) directional valves that can be configuredwith up to 5 different spool configurations. The supply port is port 3 and all ports will accept 5000 psi (350 bar).Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 20 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 50 cc/min.@70 barPilot Volume Displacement 4,4 ccSeal kit - Cartridge Buna: 990054007Seal kit - Cartridge Polyurethane: 990054002Seal kit - Cartridge Viton: 990054006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Closed CrossoverO Open CrossoverR Restricted CrossoverY All Ports BlockedZ All Ports Open

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DDHG

Model Code Example: DDHGXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 294 of 357

MODELDPBA

2-way, pilot operated, directional valve with internal drain to port 3 - normallyopenSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPBA

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPBALANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 295 of 357

MODELDPCA

2-way, pilot operated, directional valve with internal drain to port 3 - normallyopenSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingC 150 - 6000 psi (10,5 - 420 bar), 3000

psi (210 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 100 - 4500 psi (7 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPCA

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPCALANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 296 of 357

MODELDRBA

2-way, direct-acting, directional valve with internal drain to port 3 - normallyopenSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRBA

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBALANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 297 of 357

MODELDVBA

2-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity - normally openSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

This valve is a normally open, 2-way directional cartridge that incorporates an integral pilot control cavity. It may beused by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts when thereis flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBA

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBA8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 298 of 357

MODELDVCA

2-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity - normally openSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

This valve is a normally open, 2-way directional cartridge that incorporates an integral pilot control cavity. It may beused by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts when thereis flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCA

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCA8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 299 of 357

MODELDPBB

2-way, pilot operated, directional valve with internal drain to port 3 - normallyclosedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPBB

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPBBLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 300 of 357

MODELDPCB

2-way, pilot operated, directional valve with internal drain to port 3 - normallyclosedSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPCB

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPCBLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 301 of 357

MODELDRBB

2-way, direct-acting, directional valve with internal drain to port 3 - normallyclosedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Normally closed, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRBB

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBBLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 302 of 357

MODELDVBB

2-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity - normally closedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

This valve is a normally closed, 2-way directional cartridge that incorporates an integral pilot control cavity. It maybe used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts whenthere is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBB

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBB8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 303 of 357

MODELDVCB

2-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity - normally closedSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

This valve is a normally closed, 2-way directional cartridge that incorporates an integral pilot control cavity. It maybe used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts whenthere is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCB

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCB8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 304 of 357

MODELDPBM

2-way, pilot operated, directional valve with drain to port 4 - normally openSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DPBM

Model Code Example: DPBMLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 305 of 357

MODELDPCM

2-way, pilot operated, directional valve with drain to port 4 - normally openSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DPCM

Model Code Example: DPCMLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 306 of 357

MODELDRBM

2-way, direct-acting, directional valve with drain to port 4 - normally openSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBM

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBMLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 307 of 357

MODELDVBM

2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity - normally openSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

This valve is a normally open, 2-way directional cartridge that incorporates an integral pilot control cavity. It may beused by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts when thereis flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,1✬ L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 99002100✬

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBM

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBM8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 308 of 357

MODELDVCM

2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity - normally openSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

This valve is a normally open, 2-way directional cartridge that incorporates an integral pilot control cavity. It may beused by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts when thereis flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,1✭ L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 99002200✭

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCM

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCM8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 309 of 357

MODELDRBMX

2-way, direct-acting, fixed setting, directional valve with drain to port 4 - normallyopenSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally open, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Seal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(F)SHIFTING PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBMX

Model Code Example: DRBMXFNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 310 of 357

MODELDRAY

2-way, pilot-to-shift directional valve with drain to port 4 - normally openSERIES 1 / CAPACITY: 2 L/min. / CAVITY: T-21A

The normally-open, direct-acting 2-way directional cartridge with external drain is a pilot unloading valve used tosense pressure in one circuit to switch or unload a valve in a different circuit. When pressure at port 1 exceeds thesetting of the valve, the spool shifts to block port 2 from port 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at Reseat 20 drops/min.Reseat >85% of settingLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory Set

(A)ADJUSTMENT RANGEA 1000 - 3000 psi (70 - 210 bar), 1000 psi

(70 bar) Standard SettingC 2000 - 6000 psi (140 - 420 bar), 2000

psi (140 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRAY

Model Code Example: DRAYLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 311 of 357

MODELDPBN

2-way, pilot operated, directional valve with drain to port 4 - normally closedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingJ 25 - 1500 psi (1,7 - 105 bar), 1000 psi

(70 bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DPBN

Model Code Example: DPBNLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 312 of 357

MODELDPCN

2-way, pilot operated, directional valve with drain to port 4 - normally closedSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DPCN

Model Code Example: DPCNLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 313 of 357

MODELDRBN

3-way, direct-acting, directional valve with drain to port 4 - normally closedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally closed, direct-acting, 3-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRBN

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBNLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 314 of 357

MODELDVBN

2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity - normally closedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

This valve is a normally closed, 2-way directional cartridge that incorporates an integral pilot control cavity. It maybe used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts whenthere is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,1✮ L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 99002100✮

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBN

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBN8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 315 of 357

MODELDVCN

2-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity - normally closedSERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

This valve is a normally closed, 2-way directional cartridge that incorporates an integral pilot control cavity. It maybe used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts whenthere is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,1✯ L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 99002200✯

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCN

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCN8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 316 of 357

MODELDRBNX

2-way, direct-acting, fixed setting, directional valve with drain to port 4 - normallyclosedSERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Normally closed, direct-acting, 3-way directional cartridges are switching devices typically used in moderate flowcircuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Seal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(F)SHIFTING PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBNX

Model Code Example: DRBNXFNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 317 of 357

MODELDRAX

2-way, pilot-to-shift directional valve with drain to port 4 - normally closedSERIES 1 / CAPACITY: 2 L/min. / CAVITY: T-21A

The normally-closed, direct-acting 2-way directional cartridge with external drain is a pilot unloading valve used tosense pressure in one circuit to switch or unload a valve in a different circuit. When pressure at port 1 exceeds thesetting of the valve, the spool shifts to connect port 2 to port 3.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at Reseat 20 drops/min.Reseat >85% of settingLocknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory Set

(A)ADJUSTMENT RANGEA 1000 - 3000 psi (70 - 210 bar), 1000 psi

(70 bar) Standard SettingC 2000 - 6000 psi (140 - 420 bar), 2000

psi (140 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRAX

Model Code Example: DRAXLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 318 of 357

MODELDPBC

3-way, pilot operated, directional valve with internal drain to port 3 (1 blocked, 2to 3 open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DPBC

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPBCLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 319 of 357

MODELDPCC

3-way, pilot operated, directional valve with internal drain to port 3 (1 blocked, 2to 3 open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingH 35 - 3000 psi (2,4 - 210 bar), 1000 psi

(70 bar) Standard SettingW 100 - 4500 psi (7 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPCC

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DPCCLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 320 of 357

MODELDRBC

3-way, direct-acting, directional valve with internal drain to port 3 (1 blocked, 2to 3 open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DRBC

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBCLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 321 of 357

MODELDRCC

3-way, direct-acting, directional valve with internal drain to port 3 (1 blocked, 2to 3 open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Polyurethane: 990002002

(L)CONTROLL Standard Screw Adjustment

(A)ADJUSTMENT RANGEA 750 - 3000 psi (50 - 210 bar), 1000 psi

(70 bar) Standard SettingB 300 - 1500 psi (20 - 105 bar), 500 psi

(35 bar) Standard SettingD 200 - 800 psi (14 - 55 bar), 400 psi (28

bar) Standard SettingE 100 - 400 psi (7 - 28 bar), 200 psi (14

bar) Standard SettingS 50 - 200 psi (3,5 - 14 bar), 100 psi (7

bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/LH Mild Steel, Zinc-Nickel

snhy.com/DRCC

Model Code Example: DRCCLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 322 of 357

MODELDVBC

3-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity (1 blocked, 2 to 3 open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

This valve is a, 3-way directional cartridge (1 blocked, 2 to 3 open) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBC

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBC8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 323 of 357

MODELDVCC

3-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity (1 blocked, 2 to 3 open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

This valve is a, 3-way directional cartridge (1 blocked, 2 to 3 open) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCC

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCC8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 324 of 357

MODELDPBD

3-way, pilot operated, directional valve with internal drain to port 3 (1 to 2 open,3 blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingK 75 - 1500 psi (5 - 105 bar), 1000 psi (70

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPBD

Model Code Example: DPBDLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 325 of 357

MODELDPCD

3-way, pilot operated, directional valve with internal drain to port 3 (1 to 2 open,3 blocked)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPCD

Model Code Example: DPCDLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 326 of 357

MODELDRBD

3-way, direct-acting, directional valve with internal drain to port 3 (1 to 2 open, 3blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

Direct-acting, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DRBD

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBDLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 327 of 357

MODELDVBD

3-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity (1 to 2 open, 3 blocked)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

This valve is a, 3-way directional cartridge (1 to 2 open, 3 blocked) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990011007Seal kit - Cartridge Polyurethane: 990011002Seal kit - Cartridge Viton: 990011006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBD

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBD8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 328 of 357

MODELDVCD

3-way, vent-to-operate, directional valve with internal drain to port 3 and integralT-8A control cavity (1 to 2 open, 3 blocked)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-2A

This valve is a, 3-way directional cartridge (1 to 2 open, 3 blocked) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990202007Seal kit - Cartridge Polyurethane: 990002002Seal kit - Cartridge Viton: 990202006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVCD

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCD8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 329 of 357

MODELDPBO

3-way, pilot operated, directional valve with drain to port 4 (1 blocked, 2 to 3open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingJ 25 - 1500 psi (1,7 - 105 bar), 1000 psi

(70 bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DPBO

Model Code Example: DPBOLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 330 of 357

MODELDPCO

3-way, pilot operated, directional valve with drain to port 4 (1 blocked, 2 to 3open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used inmoderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges orlogic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barControl Pilot Flow 0,16 - 0,25 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 15 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 100 - 3000 psi (7 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 1000 psi

(70 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingW 150 - 4500 psi (10,5 - 315 bar), 1000

psi (70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DPCO

Model Code Example: DPCOLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 331 of 357

MODELDRBO

3-way, direct-acting, directional valve with drain to port 4 (1 blocked, 2 to 3open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK HandknobO Handknob with Panel Mount

(A)ADJUSTMENT RANGEA 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard SettingB 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard SettingW 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBO

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.NOTES

Model Code Example: DRBOLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 332 of 357

MODELDRCO

3-way, direct-acting, directional valve with drain to port 4 (1 blocked, 2 to 3open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Adjustment - Number of Clockwise Turns to Increase Setting 5Locknut Hex Size 15 mmLocknut Torque 9 - 10 NmSeal kit - Cartridge Buna: 990022007Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(L)CONTROLL Standard Screw AdjustmentC Tamper Resistant - Factory SetK Handknob

(A)ADJUSTMENT RANGEA 750 - 3000 psi (50 - 210 bar), 1000 psi

(70 bar) Standard SettingB 300 - 1500 psi (20 - 105 bar), 500 psi

(35 bar) Standard SettingD 25 - 800 psi (1,7 - 55 bar), 400 psi (28

bar) Standard SettingE 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard SettingS 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard Setting

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRCO

Model Code Example: DRCOLANCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 333 of 357

MODELDVBO

3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity (1 blocked, 2 to 3 open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

This valve is a, 3-way directional cartridge (1 blocked, 2 to 3 open) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DVBO

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVBO8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 334 of 357

MODELDVCO

3-way, vent-to-operate, directional valve with drain to port 4 and integral T-8Acontrol cavity (1 blocked, 2 to 3 open)SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A

This valve is a, 3-way directional cartridge (1 blocked, 2 to 3 open) that incorporates an integral pilot control cavity.It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shiftswhen there is flow through the pilot control cartridge installed in the T-8A cavity.

TECHNICAL DATAMaximum Operating Pressure 350 barControl Pilot Flow 0,11 - 0,16 L/min.Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Control Cavity T-8ASeal kit - Cartridge Buna: 990022007Seal kit - Cartridge EPDM: 990022014Seal kit - Cartridge Polyurethane: 990022002Seal kit - Cartridge Viton: 990022006

(8)CONTROL8 T-8A Cavity

(F)MINIMUM CONTROL PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DVCO

Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled atpoint of use.NOTES

Model Code Example: DVCO8FNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 335 of 357

MODELDRBOX

3-way, direct-acting, fixed setting, directional valve with drain to port 4 (1blocked, 2 to 3 open)SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-21A

Direct-acting, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderateflow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logiccartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

TECHNICAL DATAFactory Pressure Settings Established at 15 L/min.Maximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Seal kit - Cartridge Buna: 990021007Seal kit - Cartridge Polyurethane: 990021002Seal kit - Cartridge Viton: 990021006

(F)SHIFTING PRESSUREF 100 psi (7 bar)

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DRBOX

Model Code Example: DRBOXFNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 336 of 357

MODELDNDM

4-way, manually-operated, directional spool valveSERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-31A

L-Control, N-Spool L-Control, C-Spool

L-Control, D-Spool L-Control, E-Spool

L-Control, H-Spool L-Control, L-Spool

L-Control, R-Spool L-Control, T-Spool

L-Control, U-Spool L-Control, Y-Spool

This manually operated, 2-position, 4-way directional cartridge is a direct-acting, balanced spool valve used tocontrol the direction of flow in a hydraulic circuit. Manual operation is achieved via Sun's Twist/Lock manualoverride mechanism and is designed for intermittent (infrequent) use only.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@210 barOperating Torque 1,2 NmSeal kit - Cartridge Buna: 990431007Seal kit - Cartridge EPDM: 990431014Seal kit - Cartridge Viton: 990431006

(L)CONTROLL Twist/Lock (Detent) Manual OverrideD Twist/Lock (Dual) Manual OverrideT Twist (Momentary) Manual Override

(N)SPOOL CONFIGURATIONN Through, Shift to CrossC Closed, Shift to ThroughD Closed, Shift to CrossE Cross, Shift to ClosedH Open, Shift to CrossL Cross, Shift to P to A, B and T BlockedR Regen, Shift to CrossT Tandem, Shift to ThroughU Through, Shift to TandemY Motor, Shift to Cross

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DNDM

Model Code Example: DNDMLNNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 337 of 357

MODELDCCF

4-way, 2-position, pilot-to-shift directional valveSERIES 1 / CAPACITY: 28 - 40 L/min. / CAVITY: T-61A

X-Control, X-Spool X-Control, A-Spool

X-Control, B-Spool X-Control, C-Spool

X-Control, H-Spool X-Control, R-Spool

X-Control, T-Spool X-Control, W-Spool

X-Control, Y-Spool

Two-position, 4-way directional cartridges are spring-offset, 6-port directional valves that can be configured from achoice of 9 different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 12 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990061007Seal kit - Cartridge Polyurethane: 990061002Seal kit - Cartridge Viton: 990061006

(X)CONTROLX Standard Pilot

(X)SPOOL CONFIGURATIONX P to B and A to T CenterA A to T CenterB B to T CenterC Blocked CenterH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DCCF

Model Code Example: DCCFXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 338 of 357

MODELDCDF

4-way, 2-position, pilot-to-shift directional valveSERIES 2 / CAPACITY: 38 - 120 L/min. / CAVITY: T-62A

X-Control, X-Spool X-Control, A-Spool

X-Control, B-Spool X-Control, C-Spool

X-Control, H-Spool X-Control, R-Spool

X-Control, T-Spool X-Control, W-Spool

X-Control, Y-Spool

Two-position, 4-way directional cartridges are spring-offset, 6-port directional valves that can be configured from achoice of 9 different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 10,5 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,98 ccSeal kit - Cartridge Buna: 990062007Seal kit - Cartridge Polyurethane: 990062002Seal kit - Cartridge Viton: 990062006

(X)CONTROLX Not Adjustable

(X)SPOOL CONFIGURATIONX P to B and A to T CenterA A to T CenterB B to T CenterC Blocked CrossoverH Open CrossoverR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/DCDF

Model Code Example: DCDFXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 339 of 357

MODELDC✰F

4-way, 2-position, pilot-to-shift directional valveSERIES 3 / CAPACITY: 95 - 380 L/min. / CAVITY: T-63A

X-Control, X-Spool X-Control, A-Spool

X-Control, B-Spool X-Control, C-Spool

X-Control, H-Spool X-Control, R-Spool

X-Control, T-Spool X-Control, W-Spool

X-Control, Y-Spool

Two-position, 4-way directional cartridges are spring-offset, 6-port directional valves that can be configured from achoice of 9 different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990063007Seal kit - Cartridge Polyurethane: 990063002Seal kit - Cartridge Viton: 990063006

(X)CONTROLX Standard Pilot

(X)SPOOL CONFIGURATIONX P to B and A to T CenterA A to T CenterB B to T CenterC Blocked CenterH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DCEF

Model Code Example: DCEFXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 340 of 357

MODELDCFF

4-way, 2-position, pilot-to-shift directional valveSERIES 4 / CAPACITY: 200 - 760 L/min. / CAVITY: T-64A

X-Control, X-Spool X-Control, A-Spool

X-Control, B-Spool X-Control, C-Spool

X-Control, H-Spool X-Control, R-Spool

X-Control, T-Spool X-Control, W-Spool

X-Control, Y-Spool

Two-position, 4-way directional cartridges are spring-offset, 6-port directional valves that can be configured from achoice of 9 different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 6,9 ccSeal kit - Cartridge Buna: 990064007Seal kit - Cartridge Polyurethane: 990064002Seal kit - Cartridge Viton: 990064006

(X)CONTROLX Standard Pilot

(X)SPOOL CONFIGURATIONX P to B and A to T CenterA A to T CenterB B to T CenterC Blocked CenterH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DCFF

Model Code Example: DCFFXXNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 341 of 357

MODELDCCD

4-way, 2-position, pilot-to-shift, detented, directional valveSERIES 1 / CAPACITY: 40 - 50 L/min. / CAVITY: T-61A

X-Control, C-Spool X-Control, H-Spool

X-Control, T-Spool X-Control, X-Spool

Two-position, detented, 4-way directional cartridges are 6-port directional valves that can be configured with up to 3different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 12 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990061007Seal kit - Cartridge Polyurethane: 990061002Seal kit - Cartridge Viton: 990061006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CrossoverH Open CrossoverT Tandem CrossoverX P to B and A to T Crossover

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCCD

Model Code Example: DCCDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 342 of 357

MODELDCDD

4-way, 2-position, pilot-to-shift, detented, directional valveSERIES 2 / CAPACITY: 80 - 120 L/min. / CAVITY: T-62A

X-Control, C-Spool

X-Control, H-Spool

X-Control, X-Spool

Two-position, detented, 4-way directional cartridges are 6-port directional valves that can be configured with up to 3different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 10,5 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 2,0 ccSeal kit - Cartridge Buna: 990062007Seal kit - Cartridge Polyurethane: 990062002Seal kit - Cartridge Viton: 990062006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CrossoverH Open CrossoverX P to B and A to T Crossover

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCDD

Model Code Example: DCDDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 343 of 357

MODELDCED

4-way, 2-position, pilot-to-shift, detented, directional valveSERIES 3 / CAPACITY: 160 - 240 L/min. / CAVITY: T-63A

X-Control, C-Spool

X-Control, H-Spool

X-Control, X-Spool

Two-position, detented, 4-way directional cartridges are 6-port directional valves that can be configured with up to 3different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 5,6 ccSeal kit - Cartridge Buna: 990063007Seal kit - Cartridge Polyurethane: 990063002Seal kit - Cartridge Viton: 990063006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CrossoverH Open CrossoverX P to B and A to T Crossover

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCED

Model Code Example: DCEDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 344 of 357

MODELDCFD

4-way, 2-position, pilot-to-shift, detented, directional valveSERIES 4 / CAPACITY: 320 - 480 L/min. / CAVITY: T-64A

X-Control, C-Spool

X-Control, H-Spool

X-Control, X-Spool Two-position, detented, 4-way directional cartridges are 6-port directional valves that can be configured with up to 3different spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity for these pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 14 ccSeal kit - Cartridge Buna: 990064007Seal kit - Cartridge Polyurethane: 990064002Seal kit - Cartridge Viton: 990064006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CrossoverH Open CrossoverX P to B and A to T Crossover

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DCFD

Model Code Example: DCFDXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 345 of 357

MODELDCCC

4-way, 3-position, pilot-to-shift directional valveSERIES 1 / CAPACITY: 28 - 40 L/min. / CAVITY: T-61A

C-Spool A-Spool

B-Spool F-Spool

H-Spool N-Spool

R-Spool T-Spool

W-Spool X-Spool

Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 12 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,33 ccSeal kit - Cartridge Buna: 990061007Seal kit - Cartridge Polyurethane: 990061002Seal kit - Cartridge Viton: 990061006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CenterA A to T CenterB B to T CenterF Closed Center, A and B to TH Open CenterN P to A and B to T CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated/LH Mild Steel, Zinc-Nickel

snhy.com/DCCC

Model Code Example: DCCCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 346 of 357

MODELDCDC

4-way, 3-position, pilot-to-shift directional valveSERIES 2 / CAPACITY: 38 - 120 L/min. / CAVITY: T-62A

C-Spool B-Spool

H-Spool N-Spool

R-Spool T-Spool

W-Spool X-Spool

Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 10,5 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,98 ccSeal kit - Cartridge Buna: 990062007Seal kit - Cartridge Polyurethane: 990062002Seal kit - Cartridge Viton: 990062006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CenterA A to T CenterB B to T CenterH Open CenterN P to A and B to T CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCDC

Model Code Example: DCDCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 347 of 357

MODELDC✱C

4-way, 3-position, pilot-to-shift directional valveS✲RI✲S 3 / CAPACITY: 95 - 380 L/min. / CAVITY: T-63A

C-Spool A-Spool

B-Spool H-Spool

N-Spool R-Spool

T-Spool W-Spool

X-Spool Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 2,8 ccSeal kit - Cartridge Buna: 990063007Seal kit - Cartridge EPDM: 990063014Seal kit - Cartridge Polyurethane: 990063002Seal kit - Cartridge Viton: 990063006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CenterA A to T CenterB B to T CenterH Open CenterN P to A and B to T CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCEC

Model Code Example: DCECXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 348 of 357

MODELDCFC

4-way, 3-position, pilot-to-shift directional valveSERIES 4 / CAPACITY: 200 - 760 L/min. / CAVITY: T-64A

C-Spool A-Spool

B-Spool H-Spool

N-Spool R-Spool

T-Spool W-Spool

X-Spool Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 9 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 6,9 ccSeal kit - Cartridge Buna: 990064007Seal kit - Cartridge EPDM: 990064014Seal kit - Cartridge Polyurethane: 990064002Seal kit - Cartridge Viton: 990064006

(X)CONTROLX Standard Pilot

(C)SPOOL CONFIGURATIONC Blocked CenterA A to T CenterB B to T CenterH Open CenterN P to A and B to T CenterR Regen CenterT Tandem CenterW A and B Bleed to T CenterY A and B to T Center

(N)SEAL MATERIALN Buna-NE EPDMV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DCFC

Model Code Example: DCFCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 349 of 357

MODELDDDC

4-way, 3-position, pilot-to-shift directional valveSERIES 2 / CAPACITY: 80 L/min. / CAVITY: T-52A

C-Spool B-Spool

D-Spool H-Spool

R-Spool T-Spool

W-Spool Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 10,5 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,82 ccSeal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Blocked CenterB B to T CenterD Blocked Center, Regen, P to B and A to

TH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T Center, RestrictiveY A and B to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/DDDC

Model Code Example: DDDCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 350 of 357

MODELDDFC

4-way, 3-position, pilot-to-shift directional valveSERIES 3 / CAPACITY: 160 L/min. / CAVITY: T-53A

C-Spool B-Spool

D-Spool H-Spool

R-Spool T-Spool

W-Spool Y-SpoolThree-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 14 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 160 cc/min.@70 barPilot Volume Displacement 1,8 ccSeal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Blocked CenterB B to T CenterD Blocked Center, Regen, P to B and A to

TH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T Center, RestrictiveY A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DDFC

Model Code Example: DDFCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 351 of 357

MODELDDHC

4-way, 3-position, pilot-to-shift directional valveSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-54A

C-Spool B-Spool

D-Spool H-Spool

R-Spool T-Spool

W-Spool Y-Spool

Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configuredfrom a choice of spool options. The supply port is port 3 and all ports will accept 5000 psi (350 bar). Capacity forthese pilot-to-shift valves is dependent on the spool type specified.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 14 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@70 barPilot Volume Displacement 4,3 ccSeal kit - Cartridge Buna: 990054007Seal kit - Cartridge Viton: 990054006

(X)CONTROLX Not Adjustable

(C)SPOOL CONFIGURATIONC Blocked CenterB B to T CenterD Blocked Center, Regen, P to B and A to

TH Open CenterR Regen CenterT Tandem CenterW A and B Bleed to T Center, RestrictiveY A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

snhy.com/DDHC

Model Code Example: DDHCXCNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 352 of 357

MODELFTCC

4-way, 3-position, meter in proportional directional valveSERIES 2 / CAPACITY: 28 L/min. / CAVITY: T-52A

Y-Spool

W-Spool

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the centerposition and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orificebetween ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of theflow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 barPilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(Y)SPOOL CONFIGURATIONY A and B to T CenterW A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/FTCC

Model Code Example: FTCCXYNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 353 of 357

MODELFTDC

4-way, 3-position, meter in proportional directional valveSERIES 2 / CAPACITY: 70 L/min. / CAVITY: T-52A

Y-Spool

W-Spool

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the centerposition and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orificebetween ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of theflow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 20 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.Pilot Volume Displacement 0,66 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990052007Seal kit - Cartridge Viton: 990052006

(X)CONTROLX Not Adjustable

(Y)SPOOL CONFIGURATIONY A and B to T CenterW A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/FTDC

Model Code Example: FTDCXYNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 354 of 357

MODELFTEC

4-way, 3-position, meter in proportional directional valveSERIES 3 / CAPACITY: 45 L/min. / CAVITY: T-53A

Y-Spool

W-Spool

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the centerposition and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orificebetween ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of theflow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 41 cc/min.@70 barPilot Volume Displacement 1,8 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(Y)SPOOL CONFIGURATIONY A and B to T CenterW A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/FTEC

Model Code Example: FTECXYNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 355 of 357

MODELFTFC

4-way, 3-position, meter in proportional directional valveSERIES 3 / CAPACITY: 140 L/min. / CAVITY: T-53A

Y-Spool

W-Spool

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the centerposition and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orificebetween ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of theflow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barPilot Pressure Required for Full Shift at Rated Flow 24 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 41 cc/min.@70 barPilot Volume Displacement 1,8 ccHysteresis ± 2 %Seal kit - Cartridge Buna: 990053007Seal kit - Cartridge Viton: 990053006

(X)CONTROLX Not Adjustable

(Y)SPOOL CONFIGURATIONY A and B to T CenterW A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/FTFC

Model Code Example: FTFCXYNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 356 of 357

MODELFTHC

4-way, 3-position, meter in proportional directional valveSERIES 4 / CAPACITY: 320 L/min. / CAVITY: T-54A

Y-Spool

W-Spool

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the centerposition and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orificebetween ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of theflow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

TECHNICAL DATAMinimum Pilot Pressure Required to Shift Valve 5,5 barMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 80 cc/min.@70 barPilot Volume Displacement 4,3 ccMaximum Pilot Pressure 35 barHysteresis ± 2 %Seal kit - Cartridge Buna: 990054007Seal kit - Cartridge Polyurethane: 990054002Seal kit - Cartridge Viton: 990054006

(X)CONTROLX Not Adjustable

(Y)SPOOL CONFIGURATIONY A and B to T CenterW A and B Bleed to T Center

(N)SEAL MATERIALN Buna-NV Viton

MATERIAL/COATINGStandard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/FTHC

Model Code Example: FTHCXYNCONFIGURATION OPTIONS

Created on 11/04/2016 c© 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 357 of 357

MODELCXBM

Insert style, free flow nose to side check valveCAPACITY: 40 L/min. / CAVITY: T-162DP

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to theoutlet (port 2) and block flow in the opposite direction.

TECHNICAL DATAMaximum Operating Pressure 350 barMaximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.Valve Internal Hex Size 8 mmSeal kit - Cartridge Buna: 990162007Seal kit - Cartridge EPDM: 990162014Seal kit - Cartridge Polyurethane: 990162002Seal kit - Cartridge Viton: 990162006

(X)CONTROLX Not Adjustable

(A)CRACKING PRESSUREA 4 psi (0,3 bar)B 15 psi (1 bar)C 30 psi (2 bar)

(N)SEAL MATERIALN Buna-NE EPDMV Viton

snhy.com/CXBM

Model Code Example: CXBMXANCONFIGURATION OPTIONS

www.sunhydraulics.com Rev. 11Feb15 | © 2015 Sun Hydraulics Corporation

Corporate Headquarters

1500 West University Parkway

Sarasota, FL 34243 U.S.A.

Phone: 941.362.1200

[email protected]

Sun Hydraulics Limited

Wheler Road

Coventry CV3 4LA

England

Ph: +44-2476-217-400

[email protected]

Sun Hydraulics Korea Corp.

92 Hogupo-ro

Namdong-gu

Incheon 405-818

Korea

Ph: +82-32-813-1350

[email protected]

Sun Hydraulik GmbH

Brüsseler Allee 2

D-41812 Erkelenz

Germany

Ph: +49-2431-8091-0

[email protected]

Sun Hydraulics China Co. Ltd

Hong Kong New World Tower

47th Floor

300, Huaihai Zhong Road

Shanghai 200021

P.R.China

Ph: +86-21-5116-2862

[email protected]

Sun Hydraulics Corporation

55 rue Fragonard

Résidence Rambouillet - Appt A-42

33520 Bruges

France

Ph: +33-673063371

[email protected]

Sun Hydraulics (India)

No. 48 ‘Regent Prime’

Unit No. 306, Level 3

Whiteield Main Road, Whiteield, Bangalore - 560 066India

Ph: +0091-80-28456325

[email protected]