95 2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com MODELS STVC : DPD2 : HR D2 : HR D3 MODEL STVC MODEL HR D2 MODEL HR D3 MODEL DPD2 SATELLITE/TV DIPLEXER The STVC allows the combining or separating of CATV signals with satellite signals to a common cable. SATELLITE/TV DIPLEXER: HIGH-PERFORMANCE The DPD2 allows the combining (or separating if used in the reverse ) of Off-Air / CATV signals with satellite signals to a common cable. Filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer was spe- cifically designed for Dish Network’s™ DP44 installations, requiring continuous 2 amp power passing. “3 SIGMA” HIGH-PERFORMANCE DIPLEXERS Holland Electronics’ “3 Sigma” diplexers are specifically designed to work in MDU applications where high return loss and high isolation are critical for proper satellite system function. The HR D2 is intended for subscriber satellite drops. The HR D3’s additional isolation makes it an ideal choice as a trunk-grade diplexer. Solder-back sealed. • Wideband Operation (15 MHz - 2150 MHz) • Higher Return Loss (15 dB @ 2 GHz Typical) • Ultra-Flat Response (±0.1 in any 24 MHz) • Flat “F” Ports DPD2 INSERTION LOSS REJECTION FREQUENCY QC LIMIT TYP FREQUENCY QC LIMIT TYP VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 40 dB 40-50 dB Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 40 dB 40-50 dB STVC INSERTION LOSS REJECTION FREQUENCY QC LIMIT TYP FREQUENCY QC LIMIT TYP VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 30 dB 35 dB Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 30 dB 35 dB SATELLITE
5
Embed
diplexers - TheKY22 - Splitters... · 2014-03-06 · signal separator signal Combiner Combine Satellite Radio, AM/FM & TV Signal onto same rg-6 cable sAtELLitE rAdiO ACCEssOriEs MOdELs
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The stVC allows the combining or separating of CATV signals with satellite signals to a common cable.
sAtellite/tv diplexer: high-performAnce
The DpD2 allows the combining (or separating if used in the reverse ) of Off-Air / CATV signals with satellite signals to a common cable. Filters harmonics in the off-air spectrum from satellite conversion devices. The DpD2 diplexer was spe-cifically designed for Dish Network’s™ DP44 installations, requiring continuous 2 amp power passing.
“3 sigmA” high-performAnce diplexers
Holland electronics’ “3 Sigma” diplexers are specifically designed to work in MDU applications where high return loss and high isolation are critical for proper satellite system function. The Hr D2 is intended for subscriber satellite drops. The Hr D3’s additional isolation makes it an ideal choice as a trunk-grade diplexer. Solder-back sealed.
• Wideband operation (15 MHz - 2150 MHz)• HigherReturnLoss(15 dB @ 2 GHz typical)• Ultra-FlatResponse(±0.1 in any 24 MHz)• flat “f” ports
dpd2 insertion loss reJection
FreQuencY Qc liMit tYp FreQuencY Qc liMit tYp
VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 40 dB 40-50 dB
Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 40 dB 40-50 dB
stVc insertion loss reJection
FreQuencY Qc liMit tYp FreQuencY Qc liMit tYp
VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 30 dB 35 dB
Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 30 dB 35 dB
hr s series: diode steered sAtellite splitters *Seepage87foradditionaldetails.
Our Hr s* series diode-steered splitters offer 130 RFI shielding. Features include solder-back housing and our patented round-pin design for improved connectivity.
hfs series: high frequencY broAdbAnd splitters *Seepage85foradditionaldetails.
The Hfs series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The Hfs-2/Hfs-4 pass power to one port and the Hfs-2p/Hfs-4p pass power to all ports.
The “3 Sigma” taps were designed for MDU applications where high return loss and high isolation is required.
hfs-*d series: high frequencY broAdbAnd splitters *Seepage85foradditionaldetails.
Holland Electronics’ Hfs-*D series high frequency splitters have been designed for residential and commer-cial applications. The diode-protected circuitry allows the DC power to pass from any output port to the input port and prevents DC backfeeding.
sAtELLitE
Applicable Patents - reference: s / u / V / w / x - see page 111 for patent details
sAtELLitE rAdiO PrOduCt OVErViEw
P/N: QPLExSeparates the signal after being com-bined through the Signal Combiner, (P/N:TPLXR).
separate the following signals:• XM / SIRIUS Satellite Radio• AM / FM / HD Radio• CATV / Sat. TV / Off-Air
signAl sepArAtorSeparate Signals To Each Receiver
signAl combinerCombine Audio & Video Signals
P/N: tPLxrMake installation easy by combining mul-tiple signals onto one RG-6 line.
Combine the following signals:• XM / SIRIUS Satellite Radio• AM / FM / HD Radio• CATV / Sat. TV / Off-Air
home sAtellite rAdio AntennA Receive XM or Sirius Radio
P/N: PrO-500Professional high gain antenna system
• Receives XM or SIRIUS
• Can drive up to 200 ft. of RG-6 with no external amplification required
• Longer runs are possible with use of SBA-1 high gain amplifier
P/N: sr-4Split one satellite radio signal up to four times from a single satellite radio antenna.
Split up to 32 different signals with help of other Pixel products.
Amplified signAl splitter1 Antenna / 4 Separate Signals
P/N: CMP2000Allows any XM ready receiver to accept signals, eliminating the need to use an additional tuner.
xm mini-tuner & docKFor XM-Ready Receivers
RF - In
Mini USB - Out
Antenna
XM Ready Receiver
sAtellite rAdio AdAptors
P/N: J6-940sMB-ffAllows the use of RG-6 cable and F-Connectors by use of a 50 ohm, SMB-F adaptor.
Model seQ509 is used to reduce the lower Ka signal levels to obtain the maximum undistorted output. Slope compensation in
the seQ509 creates a positive slope signal for distribution.
satellite eQualiZer
tYp. Min.
Insertion Loss 12 - 3 dB(54 - 2400 MHz)
13 - 4 dB(54-2400 MHz)
Return Loss 15 dB 12 dB
Inputs / Outputs 5 - 2400 MHz
power inserter with polAritY locKing cApAbilitY
The 5sAtpl was designed to power DIRECTV™ satellite dishes. Locks the four or five LNB outputs for splitting to multi-switches. Also increases DC line voltage for longer cable runs. Ideal for usage on MDU trunk lines.