List of DIN standards From Wikipedia, the free encyclopedia Jump to: navigation , search This is an incomplete list of DIN standards . The "STATUS" column gives the latest known status of the standard. o If a standard has been withdrawn and no replacement specification is listed, either the specification was withdrawn without replacement or a replacement specification could not be identified. DIN standards that begin with "DIN V" ("Vornorm", meaning "pre-issue") are the result of standardization work, but because of certain reservations on the content or because of the divergent compared to a standard installation procedure of DIN, they are not yet published standards. Contents [hide ] 1 DIN 1 to DIN 999 o 1.1 DIN 1 to DIN 99 o 1.2 DIN 100 to DIN 199 o 1.3 DIN 200 to DIN 299 o 1.4 DIN 300 to DIN 399 o 1.5 DIN 400 to DIN 499 o 1.6 DIN 500 to DIN 599 o 1.7 DIN 600 to DIN 699 o 1.8 DIN 700 to DIN 799 o 1.9 DIN 800 to DIN 899 o 1.10 DIN 900 to DIN 999 2 DIN 1000 to DIN 9999 o 2.1 DIN 1000 to DIN 1999 o 2.2 DIN 2000 to DIN 2999 o 2.3 DIN 4000 to DIN 4999
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
List of DIN standardsFrom Wikipedia, the free encyclopedia
Jump to: navigation, search
This is an incomplete list of DIN standards.
The "STATUS" column gives the latest known status of the standard. o If a standard has been withdrawn and no replacement specification is listed, either
the specification was withdrawn without replacement or a replacement specification could not be identified.
DIN standards that begin with "DIN V" ("Vornorm", meaning "pre-issue") are the result of standardization work, but because of certain reservations on the content or because of the divergent compared to a standard installation procedure of DIN, they are not yet published standards.
Contents
[hide]
1 DIN 1 to DIN 999 o 1.1 DIN 1 to DIN 99 o 1.2 DIN 100 to DIN 199 o 1.3 DIN 200 to DIN 299 o 1.4 DIN 300 to DIN 399 o 1.5 DIN 400 to DIN 499 o 1.6 DIN 500 to DIN 599 o 1.7 DIN 600 to DIN 699 o 1.8 DIN 700 to DIN 799 o 1.9 DIN 800 to DIN 899 o 1.10 DIN 900 to DIN 999
2 DIN 1000 to DIN 9999 o 2.1 DIN 1000 to DIN 1999 o 2.2 DIN 2000 to DIN 2999 o 2.3 DIN 4000 to DIN 4999 o 2.4 DIN 5000 to DIN 5999 o 2.5 DIN 6000 to DIN 6999 o 2.6 DIN 7000 to DIN 7999 o 2.7 DIN 8000 to DIN 8999 o 2.8 DIN 9000 to DIN 9999
3 DIN 10000 to DIN 19999 o 3.1 DIN 10000 to DIN 10999 o 3.2 DIN 11000 to DIN 11999
o 3.3 DIN 12000 to DIN 12999 o 3.4 DIN 13000 to DIN 13999 o 3.5 DIN 14000 to DIN 14999 o 3.6 DIN 15000 to DIN 15999 o 3.7 DIN 16000 to DIN 16999 o 3.8 DIN 17000 to DIN 17999 o 3.9 DIN 18000 to DIN 18999 o 3.10 DIN 19000 to DIN 19999
4 DIN 20000 to DIN 29999 o 4.1 DIN 24000 to DIN 24999 o 4.2 DIN 28000 to DIN 28999
5 DIN 30000 to DIN 39999 o 5.1 DIN 31000 to DIN 31999
6 DIN 40000 to DIN 49999 7 DIN 50000 to DIN 59999 8 DIN 60000 to DIN 69999 9 DIN 70000 to DIN 79999 10 External links
Projection displays in Normal, views and special presentations
Withdrawn DIN ISO 128, DIN EN ISO 128 ISO 128
DIN 7 Parallel Pins Withdrawn DIN EN 22338 ISO 2338
DIN 11
Whitworth pipe threads 1/4"-6" Thread diameter, sizes, teaching information
Withdrawn
DIN 13-1
ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
Active
DIN 13-2 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2
Active
mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 13-3
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
Active
DIN 13-4
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
Active
DIN 13-5 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch
Active
threads; nominal diameter from 7,5 mm to 200 mm
DIN 13-6
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
Active
DIN 13-7
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
Active
DIN 13-8 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300
Active
mm
DIN 13-9
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
Active
DIN 13-10
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
Active
DIN 13-11
ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm
Active
DIN 13-12
ISO general purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and fine pitch threads Selected diameters and pitches
Active
DIN 13-13
ISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes
Active
DIN 13-19
ISO general purpose metric screw threads - Part 19: Nominal profiles
Active
DIN 13-20
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance
Active
classes; nominal sizes from 1 mm to 68 mm
DIN 13-21
ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
Active
DIN 13-22
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm
Active
DIN 13-23
ISO general purpose metric screw threads - Part 23: Limits of sizes for fine
Active
pitch threads with the preferred tolerance classes; Nominal diameter from 53 mm to 110 mm
DIN 13-24
ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 112 mm to 180 mm
Active
DIN 13-25
ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 182 mm to 250 mm
Active
DIN 13-26
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 252 mm to 1000 mm
Active
DIN 13-28
ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
Active
DIN 13-50
ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw
Active
threads
DIN 13-51
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
Active
DIN 13-52
ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
Active
DIN 76-1
Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1
Active
DIN 76-2 Thread run-outs and thread
Active
undercuts for pipe threads conforming to ISO 228 part 1
DIN 76-3
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
Active
DIN 78Protrusions of bolt ends
ActiveDIN EN ISO 4753 (governs thread ends for bolts assembled with hexagon slotted nuts)
ISO 4753
DIN 84
Product grade A slotted cheese head screws
Withdrawn DIN EN ISO 1207 ISO 1207
DIN 85Product grade A slotted pan head screws
Withdrawn DIN EN ISO 1580 ISO 1580
DIN 93Tab washers with long tab
Withdrawn DIN EN ISO 1234 ISO 1234
DIN 94 Split pins Withdrawn DIN EN ISO 1234 ISO 1234
DIN 95 Slotted Raised Countersunk
Active
(Oval) Head Wood Screws
DIN 96Slotted Round Head Wood Screws
Active
[edit] DIN 100 to DIN 199
DIN TITLE STATUS DIN REPLACEMENT OTHER ORG
REPLACEMENT
DIN V 105-1
Clay masonry units - Part 1: Solid and hollow bricks with density classes of 1,2
WithdrawnDIN V 105-100, DIN EN 771-1
EN 771-1
DIN V 105-2
Clay masonry units - Part 2: Solid and hollow bricks with density classes equal 1.0
WithdrawnDIN V 105-100, DIN EN 771-1
EN 771-1
DIN 105-3 Clay masonry units - Part 3: Tile and high strength-high-strength
delivery conditions; Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Types and Dimensional Accuracy
DIN 267-3
Fasteners - Part 3: Technical delivery conditions; Property classes for carbon steel and alloy steel bolts and screws; Conversion of property classes
Withdrawn DIN EN ISO 898-1 ISO 898-1
DIN 267-4
Fasteners - Part 4: Technical delivery conditions; Property classes for nuts (previous classes)
Withdrawn DIN EN ISO 898-2 ISO 898-2
DIN 267-5 Fasteners – Part 5: Technical delivery conditions; Acceptance inspection;
Withdrawn DIN EN ISO 3269 ISO 3269
modified version of ISO 3269, 1984 edition
DIN 267-6
Fasteners - Part 6: Technical delivery conditions; Designs and accuracy of measurement for product grade F
Active
DIN 267-7
Fasteners - Part 9: Technical delivery conditions; Bolts made of unalloyed or low-alloy steels
Withdrawn DIN EN ISO 898-1 ISO 898-1
DIN 267-9
Fasteners - Part 9: Technical delivery conditions; Components with Electroplated Coatings
Withdrawn DIN EN ISO 4042 ISO 4042
DIN 267-10 Fasteners - Part 10: Technical delivery conditions; Hot dip
Withdrawn DIN EN ISO 10684 ISO 10684
galvanized parts
DIN 267-11
Fasteners - Part 11: Technical delivery conditions (with additions to ISO 3506); Corrosion-resistant stainless steel fasteners
Active
DIN 267-12
Fasteners - Part 12: Technical delivery conditions; Self-tapping screws
Withdrawn DIN EN ISO 2702 ISO 2702
DIN 267-13 Fasteners - Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature
Active
Strength
DIN 267-15
Fasteners - Part 15: Technical delivery conditions; Prevailing torque type nuts
Withdrawn
DIN EN ISO 2320,DIN EN ISO 3506-1,DIN EN ISO 3506-2,DIN EN ISO 3506-3
ISO 2320,ISO 3506-1,ISO 3506-2,ISO 3506-3
DIN 267-18
Fasteners - Part 18: Technical delivery conditions; Components made of Non-ferrous Metals
Withdrawn DIN EN 28839 ISO 8839
DIN 267-19
Fasteners - Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws
WithdrawnDIN EN ISO 26157-1,DIN EN ISO 26157-3
ISO 6157-1,ISO 6157-3
DIN 267-20
Fasteners - Part 20: Technical delivery conditions; Surface discontinuities on nuts
WithdrawnDIN EN ISO 6157-2,DIN EN ISO 10484,DIN EN ISO 10485
ISO 6157-2,ISO 10484,ISO 10485
DIN 267-21 Fasteners - Part 21:
Withdrawn DIN EN ISO 6157-2,DIN EN ISO 10484,
ISO 6157-2,ISO 10484,
Technical delivery conditions; Widening test on nuts
DIN EN ISO 10485 ISO 10485
DIN 267-23
Fasteners - Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)
Withdrawn DIN EN ISO 898-6 ISO 898-6
DIN 267-24
Fasteners - Part 24: Technical delivery conditions; Property classes for nuts (Hardness classes)
Active
DIN 267-25
Fasteners - Part 25: Technical delivery conditions; Torsion testing of M1 to M10 bolts and screws
Withdrawn DIN EN 20898-7 EN 20898-7
DIN 267-26 Fasteners - Part 26: Technical delivery conditions;
Active
Conical spring washers for bolt/nut assemblies
DIN 267-27
Fasteners - Part 27: Technical specifications; Steel screws, bolts and studs with adhesive coating
Active
DIN 267-28
Fasteners - Part 28: Technical specifications; Steel screws, bolts and studs with locking coating
Active
DIN 267-29
Fasteners - Part 29: Technical specifications; Product grades for parts for bolted connections for use at temperatures ranging from -200°C to +700°C
Active
DIN 267-30 Fasteners - Part 30: Technical specifications; Metric thread
Active
rolling screws of property class 10.9
DIN 276-1
Building costs; Part 1: Building construction
Active
DIN 276-2
Building costs; Part 2: Classification of cost
Active
DIN 276-3
Building costs; Part 3: Ascertainment of cost
Active
[edit] DIN 300 to DIN 399
DIN TITLE STATUS DIN REPLACEMENT OTHER ORG
REPLACEMENT
DIN 315Wing nuts with rounded wings
Active
DIN 316Wing screws with rounded wings
Active
DIN 323-1 Preferred Numbers and Series of Preferred Numbers; Basic Values,
Units - Part 3: Conversions of Units No Longer To Be Used
Active
DIN 1302
General Mathematical Symbols and Concepts
Active
DIN 1303
Vectors, matrices, tensors; symbols and concepts
Active
DIN 1304-1
Letter symbols for physical quantities - Part 1: Symbols for general use
Active
DIN 1304-2
Letter symbols for physical quantities - Part 2: Symbols for use in meteorology and geophysics
Active
DIN 1304-3 Letter symbols for physical quantities - Part 3: Symbols for use in electric power
Active
engineering
DIN 1304-5
Letter symbols for physical quantities - Part 5: Symbols for use in fluid mechanics
Active
DIN 1304-8
Letter symbols for physical quantities - Part 9: Symbols for use in the field of static converters using semiconductor devices
Active
DIN 1304-9
Letter symbols for physical quantities - Part 9: Symbols for equivalent circuits of piezoelectric crystals
Active
DIN 1311-1
(Mechanical) vibrations, oscillations and vibration systems - Part 1: Basic concepts, survey
Active
DIN 1311-2 (Mechanical) vibrations, oscillations and
Active
vibration systems - Part 2: Linear vibration systems with single degree of freedom
DIN 1311-3
(Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom
Active
DIN 1311-4
Vibration; Vibrating Continua, Waves
Active
DIN 1313
Physical Quantities and Equation; Concepts, Methods of Writing
Active
DIN 1315Angle; Concepts, Units
Active
DIN 1318 Loudness Level Active
DIN 1319-1 Fundamentals of Metrology –
Active
Part 1: Basic Terminology
DIN 1319-2
Basic Concepts in Metrology – Part 2: Terminology Related To Measuring Equipment
Active
DIN 1319-3
Basic Concepts in Metrology – Part 3: Terminology Relating To the Uncertainty of Measurement and the Assessment of Measuring Instruments and Measuring Equipment
Active
DIN 1319-4
Basic Concepts in Metrology – Part 4: Treatment of Uncertainties in the Evaluation of Measurements
Active
DIN 1320Acoustics; Terminology
Active
DIN 1324-1Electromagnetic Field - Part 1. State Quantities
Active
DIN 1324-2
Electromagnetic Field - Part 2. Material Quantities
Active
DIN 1324-3
Electromagnetic Field - Part 3. Electromagnetic Waves
Active
DIN 1325-1
Vocabulary for value management, value analysis and functional analysis - Part 1: Value analysis and functional analysis
Active
DIN 1325-2
Value Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value Management
Active
DIN 1332Acoustics; Symbols
Withdrawn DIN EN ISO 80000-8 ISO 80000-8
DIN 1333Presentation of Numerical Data
Active
DIN 1338Writing and Typesetting of Formulae
Active
DIN 1355-1
Time; Calendar, Numbering of Weeks, Date of Day, (Clock) Time
Withdrawn
DIN 1421
Arrangement and Numbering in Texts; Clauses, Paragraphs, Enumerations
Active
DIN 1422-1
Publications in Sciences, Technology, Economy and Administration; Presentation of Manuscripts and Typoscripts
Active
DIN 1422-2
Publications in Sciences, Technology, Economy and Administration; Presentation of Clean Copies for Reprographic Use
Active
DIN 1422-3
Publications in Sciences, Technology, Economy and Administration; Typographical Presentation
Active
DIN 1422-4
Publications in Sciences, Technology, Economy and Administration; Presentation of Scientific and Technical Reports
Active
DIN 1440Medium type washers for pins
Withdrawn DIN EN 28738 ISO 8738
DIN 1443Clevis pins without head
Withdrawn DIN EN 22340 ISO 2340
DIN 1444Clevis pins with head
Withdrawn DIN EN 22341 ISO 2341
DIN 1451-1
Lettering - Linear-Antiqua without serifes – General
Active
DIN 1451-2
Typefaces - lineal Linear-Antiqua; lettering for transportation
Active
DIN 1451-3
Lettering - Linear-Antiqua without serifes; lettering for printing
Active
DIN 1451-4 Typefaces - lineal Linear-Antiqua;
Active
stenciled lettering for engraving and other processes
DIN 1463-1
Guidelines for the Establishment and Development of Thesauri; Monolingual Thesauri
Active
DIN 1463-2
Guidelines for the Establishment and Development of Thesauri; Multilingual Thesauri
Active
DIN 1470
Grooved Pins, Full Length Parallel-grooved with Pilot
Withdrawn DIN EN 8739 ISO 8739
DIN 1471Grooved Pins, Full Length Taper-grooved
Withdrawn DIN EN 8744 ISO 8744
DIN 1472Grooved Pins, Half Length Taper-grooved
Withdrawn DIN EN 8745 ISO 8745
DIN 1473 Grooved Pins, Full Length Parallel-
Withdrawn DIN EN ISO 8740 ISO 8740
grooved with Chamfer
DIN 1474
Grooved Pins, Half Length Reverse-grooved
Withdrawn DIN EN 8741 ISO 8741
DIN 1475Grooved Pins, Third Length Centre-grooved
Withdrawn DIN EN 8742 ISO 8742
DIN 1476Round Head Grooved Pins
Withdrawn DIN EN 8746 ISO 8746
DIN 1477Countersunk Head Grooved Pins
Withdrawn DIN EN 8747 ISO 8747
DIN 1481
Spring-Type Straight Pins (Roll Pins) - Heavy Type
Withdrawn DIN EN ISO 8752 ISO 8752
DIN 1505-1
Bibliographic references to documents - Part 1: Full References to Printed and Published Documents
Active
DIN 1505-2
Bibliographic references to documents - Part 2: Rules for Citing
Active
DIN 1505-3
Bibliographic references to documents - Part 3: Indexes of cited documents (bibliographies)
Active
DIN 1511
Pattern Equipment for Foundries; Production and Quality
Withdrawn DIN EN 12890 EN 12890
DIN 1530-1
Tools for moulding - Part 1: Ejector pins with cylindrical head
Active
DIN 1530-2
Tools for moulding - Part 2: Shouldered ejector pins
Active
DIN 1530-3
Tools for moulding - Part 3: Ejector pins with conical head
Text and office systems - Keyboards - Part 1: German keyboard for typewriters; key arrangement and allocation of characters to keys
Active
DIN 2137-2
Text and office systems - Keyboards - Part 2: German keyboard for data and text processing; Key arrangement and allocation of graphic characters to keys
Active
DIN 2137-6 Text and office systems - Keyboards - Part 6: German keyboard for data and text processing as well as for typewriters;
Active
Key arrangement and allocation of functions to keys
DIN 2137-10
Text and office systems - Keyboards - Part 10: German keyboard for data and text processing as well as for typewriters; Arrangement of key positions and key distances
Active
DIN 2137-11
Text and office systems - Keyboards - Part 11: German keyboard for data and text processing as well as for typewriters; Principles governing the allocation of characters or functions to keys and the placement of their symbols on the keys
Active
DIN 2137-12
Text and office systems - Keyboards - Part 12: German keyboard for data and text processing; Key arrangement and allocation for portable computers
Active
DIN 2342-1
Vocabulary of terminology; basic concepts
Active
DIN 2391-1
Seamless precision steel tubes - Part 1: Dimensions
Canceled DIN EN 10305-1 EN 10305-1
DIN 2391-2
Seamless precision steel tubes - Part 2: Technical delivery conditions
Canceled DIN EN 10305-1 EN 10305-1
DIN 2448 Seamless Steel Pipes and Tubes - Dimensions, Conventional Masses per
Canceled DIN EN 10220 EN 10220
Unit Length
DIN 2527
Blank flanges - Nominal pressure 6 to 100
Withdrawn DIN EN 1092-1 EN 1092-1
DIN 2860
Capillary Fittings; Bends 180° of Copper
Withdrawn
DIN 2999-1
Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
Withdrawn DIN EN 10226-1 EN 10226-1
DIN 2999-2
Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and Use of Gauges
Withdrawn DIN EN 10226-3 EN 10226-3
DIN 2999-3 Whitworth Pipe Threads for Tubes and Fittings;
Withdrawn DIN EN 10226-3 EN 10226-3
Gauge Dimensions
DIN 2999-4
Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread
Withdrawn DIN EN 10226-3 EN 10226-3
DIN 2999-5
Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads, Sizes
Withdrawn DIN EN 10226-3 EN 10226-3
DIN 2999-6
Whitworth Pipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes
Fire behaviour of building materials and elements - Part 1: Classification of building materials - Requirements and testing
Active
DIN 4102-2
Fire Behaviour of Building Materials and Building Components - Part 2: Building Components; Definitions, Requirements and Tests
Active
DIN 4102-3
Fire Behaviour of Building Materials and Building Components - Part 3: Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests
Active
DIN 4102-4
Fire behaviour of building materials and elements - Part 4: Overview and design of classified building materials,
Active
elements and components
DIN 4102-5
Fire Behaviour of Building Materials and Building Components - Part 5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests
Active
DIN 4102-6
Fire Behaviour of Building Materials and Building Components - Part 6: Ventilation Ducts; Definitions, Requirements and Tests
Active
DIN 4102-7
Fire behaviour of building materials and elements - Part 7: Roofing - Concepts, requirements and testing
Active
DIN 4102-8
Fire behaviour of building materials and components -
Active
Part 8: Small scale test furnace
DIN 4102-9
Fire behaviour of building materials and elements - Part 9: seals for cable penetrations; concepts, requirements and testing
Active
DIN 4102-11
Fire behaviour of building materials and building components - Part 10: pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing
Active
DIN 4102-12
Fire behaviour of building materials and elements - Part 12: Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testing
Active
DIN 4102-13
Fire behaviour of building materials and elements - Part 13: Fire resistant glazing; concepts, requirements and testing
Active
DIN 4102-14
Fire behaviour of building materials and elements - Part 14: Determination of the burning behaviour of floor covering systems using a radiant heat source
Active
DIN 4102-15
Fire behaviour of building materials and elements - Part 15: "Brandschacht"
Active
DIN 4102-16
Fire behaviour of building materials and elements - Part 16: "Brandschacht" tests
Active
DIN 4102-17
Fire behaviour of building materials and elements - Part
Active
17: determination of melting point of mineral fibre insulating materials; concepts, requirements and testing
DIN 4102-18
Fire behaviour of building materials and components - Part 18: fire barriers, verification of automatic closure (continuous performance test)
Active
DIN 4102-22
Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design of partial safety factors
Active
DIN 4108-1
Thermal protection and energy economy in buildings - Part 1: Quantities and units
Active
DIN 4108-2
Thermal protection and
Active
energy economy in buildings - Part 2: Minimum requirements to thermal insulation
DIN 4108-3
Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions; Requirements and directions for design and construction
Active
DIN 4108-7
Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance
Active
DIN 4108-10
Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation
Active
materials - Factory made products
DIN 4150-1
Structural vibration - Part 1: Prediction of vibration parameters
Active
DIN 4150-2
Structural vibration - Part 2: Human exposure to vibration in buildings
Active
DIN 4150-3
Structural vibration - Part 3: Effects of vibration on structures
Active
DIN V 4701-10
Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation
Active
DIN V 4701-12
Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat
Active
generation and domestic hot water generation
DIN 4710
Statistics on German meteorological data for calculating the energy requirements for heating and air conditioning equipment
Active
[edit] DIN 5000 to DIN 5999
DIN TITLE STATUS DIN
REPLACEMENT OTHER ORG
REPLACEMENT
DIN 5008Rules for text presentation
Active
DIN 5031-1
Physics of radiation in the field of optics and illuminating engineering - Part 1: Quantities, symbols and units of radiation physics
Active
DIN 5031-2
Physics of radiation in the field of optics and illuminating engineering - Part 2:
Pan head screws with type H or type Z cross recess - product grade A
Active
DIN 7245
Saw blades for web saws
Active
DIN 7337
Break mandrel blind rivets
Withdrawn
DIN EN ISO 14589, DIN EN ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN ISO 15981, DIN EN ISO 15982, DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584
ISO 14589, ISO 15977, ISO 15978, ISO 15979, ISO 15980, ISO 15981, ISO 15982, ISO 15983, ISO 15984, ISO 16582, ISO 16583, ISO 16584
DIN 7343
Spiral Pins; Normal Type
Withdrawn DIN EN ISO 8750 ISO 8750
DIN 7344
Spiral Pins; Heavy Duty Type
Withdrawn DIN EN ISO 8748 ISO 8748
DIN 7346
Spring-Type Straight Pins; (Roll Pins) Light-weight Type
Brazing and Braze Weld Filler Metals; Copper Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery
Withdrawn DIN EN 1044 EN 1044
DIN 8513-2
Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Silver; Composition, Use, Technical Conditions of Delivery
Withdrawn DIN EN 1044 EN 1044
DIN 8513-3
Brazing filler metals; silver brazing filler metals containing not less than 20 % of silver; composition, application, technical delivery conditions
Withdrawn DIN EN 1044 EN 1044
DIN 8513-4
Brazing and Braze Weld Filler Metals; Aluminium-Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery
Withdrawn DIN EN 1044 EN 1044
DIN 8513-5
Brazing filler metals; Nickel base filler metals for high temperature brazing; Application, composition, technical delivery conditions
Withdrawn DIN EN 1044 EN 1044
DIN 8580
Manufacturing processes - Terms and definitions, division
Active
DIN 8806-1
Narrow band saw blades for woodworking; dimensions
Division of hospitals into functional areas and functional sections
Active
DIN 13260-2
Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuum
Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment
Active
DIN 18015-3
Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment
Active
DIN 18022
Domestic kitchens, bathrooms and WCs; design principles
Withdrawn
DIN 18024-1
Barrier-free built environment - Part 1: Streets, squares, paths, public transport, recreation areas and playgrounds - Design principles
Active
DIN 18024-2
Construction of accessible buildings - Part 2: Publicly accessible buildings and workplaces, design principles
Active
DIN 18065
Stairs in buildings - Terminology, measuring rules, main dimensions
Active
DIN 18379
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems
Active
DIN 18382 Contract procedures for building works - Part C: General technical specifications for building works; Low-
Active
voltage installation and medium-voltage installation with nominal voltages up to including 36 kV
DIN 18384
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems
Active
DIN 18800-1
Steel structures - Part 1: Design and construction
Active
DIN 18800-2
Steel structures - Part 2: Analysis of safety against buckling of linear members and frames
Active
DIN 18800-3
Steel structures - Part 3: Analysis of safety against buckling of plates
Active
DIN 18800-4
Steel structures - Part 4: Analysis of safety against buckling of shells
Active
DIN 18800-5
Steel structures - Part 5: Composite structures of steel and concrete - Design and construction
Active
DIN 18800-7
Steel structures - Part 7: Execution and constructor's qualification
Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type A; solder termination for free wiring
Active
DIN 41750-5
Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type C; crimp termination for free wiring
Active
DIN 41782
Guidelines for the presentation of published data
Withdrawn DIN IEC 60747-2 IEC 60747-2
DIN 41786
Thyristors, definitions
Withdrawn
DIN 41855
Semiconductor devices and integrated circuits; kinds of devices and general terms
Withdrawn
DIN 41855-2
Semiconductor devices and integrated circuits; optoelectronic semiconductor devices; terms and definitions
Withdrawn
DIN 41868
Cases 10 A 3 and 10 B 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-1
Case 23 A 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-2
Cases 34 A 2 and 34 A 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-3
Case 11 A 3 and 11 B 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-4
Case 12 A 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-5
Case 13 A 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-6
Case 14 A 3 for semiconductor devices; main dimensions
Withdrawn
DIN 41869-7
Case type 15 for semiconductor devices; main dimensions
Withdrawn
DIN 41873
Cases type 5 for semiconductor devices and integrated circuits
Withdrawn
DIN 41876
Cases 18 A, B and C with 2 up to 4 terminals for semiconductor devices; main dimensions
Withdrawn
DIN 42400
Terminal markings for electrical equipment; general rules, alphanumeric system
Withdrawn DIN EN 60445 EN 60445
DIN 42402
Terminal markings for power transformers and reactors
Active
DIN 42403
Terminal markings for power converters
Withdrawn DIN IEC 61148 IEC 61148
DIN 42673-1
Totally enclosed fan-cooled three-phase induction
Withdrawn
motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions and relationship frame sizes-output ratings
DIN 42673-2
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
Active
DIN 42673-3
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
Active
DIN 42673-4
Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope
Active
dimensions
DIN 42961
Rating plates for rotating electrical machinery; design
Active
DIN 42973
Rated output values for rotating electrical machinery for continuous duty
Active
DIN 43700
Measurement and control - Measurement and control instruments for panel mounting - Nominal front- and cut-out-dimensions
Withdrawn DIN IEC 61554 IEC 61554
DIN 43780
Electrical measuring instruments; direct acting indicating electrical measuring instruments and their accessories
Withdrawn DIN EN 60051-1 EN 60051-1
DIN 43802-2
Line scales and pointers for indicating electrical measuring instruments; general requirements
Active
DIN 43802-3
Line scales and pointers for indicating electrical measuring instruments; designs and dimensions
Active
DIN 43802-4
Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering
Active
DIN 43807
Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
Active
DIN 43856
Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams
Active
DIN 43856-2
Electricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995
Active
DIN 43870-1
Meter mounting boards; dimensions based on a grid system
Active
DIN 43870-2
Meter mounting boards; functional area
Active
DIN 43870-3
Meter panels; wirings
Active
DIN 44070-1
Meter mounting boards; dimensions based on a grid system
Active
DIN 44070-2
Meter mounting boards; functional area
Active
DIN 44070-3
Meter panels; wirings
Active
DIN 44070-4
Meter panels; cover for wiring
Active
DIN 44080
Thermistors; PTC, technical terms and tests
Withdrawn
DIN 44300
Information processing; vocabulary
Withdrawn
DIN 44300-1
Information processing - Concepts - General terms
Withdrawn
DIN 44300-2
Information processing - Concepts -
Withdrawn
Representation of data
DIN 44300-3
Information processing - Concepts - Data structures
Withdrawn
DIN 44300-4
Information processing - Concepts – Programming
Withdrawn
DIN 44300-5
Information processing - Concepts - Components of digital computer systems
Withdrawn
DIN 44300-6
Information processing - Concepts – Storage
Withdrawn
DIN 44300-7
Information processing - Concepts – Times
Withdrawn
DIN 44300-8
Information processing - Concepts - Processing functions
Withdrawn
DIN 44300-9
Information processing - Concepts - Process relations and modes of operation
Withdrawn
DIN 45322
Circular connectors for radio and associated sound equipment; six-pole connectors
Withdrawn DIN EN 60130-9 EN 60130-9
DIN 45323
Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial power plugs)
Active
DIN 45500-1
High fidelity audio equipment and systems; minimum performance requirements; Part 1: general
Withdrawn DIN EN 61305-1 EN 61305-1
DIN 45500-2
High fidelity audio equipment and systems; requirements for tuner equipments
Withdrawn DIN EN 61305-2 EN 61305-2
DIN 45500-3
High fidelity audio equipment and systems; requirements for disk record reproducing equipments
Withdrawn
DIN 45500-4
High fidelity audio equipment and systems; minimum performance
Withdrawn
requirements for magnetic recording and reproducing equipment
DIN 45500-5
High fidelity audio equipment and systems; minimum performance requirements for microphones
Withdrawn
DIN 45500-6
High fidelity audio equipment and systems; minimum performance requirements for amplifiers
Withdrawn DIN EN 61305-3 EN 61305-3
DIN 45500-7
High fidelity audio equipment and systems; requirements for loudspeakers
Withdrawn DIN EN 61305-5 EN 61305-5
DIN 45500-8
High fidelity audio equipment and systems; for sets and systems
Withdrawn
DIN 45500-10
High fidelity audio equipment and systems; minimum performance requirements for headphones
Withdrawn
DIN 45507
Measuring apparatus for frequency variations in sound
Withdrawn DIN IEC 60386 IEC 60386
recording equipment
DIN 45539
Disk record reproducing equipment; directives for measurements, markings and audio frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers
Withdrawn DIN IEC 60098 IEC 60098
DIN 45596
Microphones; phantom powering
Withdrawn
DIN 46400-1
Steel flats with special magnetic properties cold rolled, non - oriented, finally annealed magnetic sheet and strip hysteresis loss at frequencies above 100 Hz
Withdrawn DIN EN 10106 EN 10106
DIN 46400-3
Grain-oriented magnetic steel and strip technical conditions
Withdrawn DIN EN 10107 EN 10107
DIN 47100
Cords for telecommunication; code of insulated conductors, colour of sheath
Withdrawn
DIN 47301-1
Terms of HF-lines Active
DIN 47301-2
Terms of HF-lines Active
DIN 47301-3
Definition of radio frequency transmission lines - mean characteristic impedance - mean standing wave ratio
Active
DIN 48803
Lightning protection system; Arrangement of components and dimensions for mounting
Withdrawn
DIN 48830
Lightning protection system; Description
Withdrawn
[edit] DIN 50000 to DIN 59999
DIN TITLE STATUS DIN
REPLACEMENT OTHER ORG
REPLACEMENT
DIN 51097 Testing of floor coverings; determination of the anti-slip properties: wet-loaded barefoot areas; walking method; ramp
Information processing; graphical symbols and their application
Active
DIN 66002
Information processing; handwriting of the digit 0 and of the upper case letter O
Active
DIN 66003Information technology - 7-bit code
Active
DIN 66004-1
Information processing - Coding on data media - Part 1: Representation of 7-bit code character sets on punched tape 25
Active
DIN 66004-2
Information processing - Coding on data media - Part 2: Representation of 7-bit coded and 8-bit coded character sets on punched cards
Active
DIN 66004-3
Information processing - Coding on data media - Part 3: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape 12
Active
DIN 66004-4
Information processing - Coding on data media - Part 4: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape cassette 3,8
Active
DIN 66004-5
Information processing - Coding on data media - Part 5: Representation of 7-bit coded and 8-bit coded set on media-flexible disk cartridge
Active
DIN 66005
Information processing; representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12
Active
DIN 66006
Presentation of ALGOL/ALCOR programs on paper tape and punch cards
Withdrawn
DIN 66007
Font CMC 7 for magnetic ink character recognition; characters and nominal dimensions
Withdrawn DIN ISO 1004 ISO 1004
DIN 66008-1
Font A for optical character recognition; characters and nominal dimensions
Active
DIN 66008-6
Font A for optical character recognition; characters and nominal dimensions; extension of the character set
Active
DIN 66008-7
Font A for optical character recognition; representation of characters by dots in a 9 × 9 matrix
Active
DIN 66009 Font B for optical character recognition;
Withdrawn
character
DIN 66020-1
Functional requirements for the interface between data terminal equipment and data circuit-terminating equipment - Part 1: General application
Active
DIN 66020-2
List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) in public data networks
Active
DIN 66020-4
Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)
Active
DIN 66020-9
Interface between data terminal
Active
equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per second
DIN 66021-1
Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)
Active
DIN 66021-2
Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per second
Active
DIN 66025-1
Numerical control of machines, format; general
Active
requirements
DIN 66025-2
Industrial automation; numerical control of machines; format, preparatory and miscellaneous functions
Active
DIN 66027
Information processing; programming language FORTRAN
Withdrawn
DIN 66215-1
Programming of numerically controlled machines; CLDATA, general structure and record types
Active
DIN 66215-2
Programming of numerically controlled machines; CLDATA; minor elements of type 2000 records (post-processor commands)
Active
DIN 66234
Information processing; programming language PL/I
Active
DIN 66255
Information processing; programming language PL/I
Active
DIN 66256
Information processing; programming language PASCAL
Withdrawn
DIN 66257
Numerical control of machines; concepts
Withdrawn DIN ISO 2806 ISO 2806
DIN 66258-1
Interfaces and basic data link control procedures for data communication; C S-interface, V S-interface
Withdrawn
DIN 66258-2
Interface and basic data link control procedures for data communication; balanced interface for start-stop transmission using basic data link control procedures on point-to-point connection
Withdrawn
DIN 66261
Information processing; Nassi-Shneiderman flowchart symbols
Active
DIN 66264-1
Industrial automation systems and integration - Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel bus
Active
DIN 66264-2
Multiprocessor control system for industrial machines (MPST); industrial automatics; rules for information interchange
Active
DIN 66303Information technology - 8 bit code
Active
DIN V 66304
Industrial automation; Computer Aided Design; format for the exchange of standard parts data
Active
DIN 66325-2
Local and Metropolitan Area Networks; LLC; identical with ISO 8802-2:1989
Withdrawn ISO 8802-2
DIN 66325-4
Local and Metropolitan Area Networks; token-passing bus access method; identical with ISO/IEC 8802-4:1990
Withdrawn ISO/IEC 8802-4
DIN 69901
Project controlling; project management; concepts
Active
[edit] DIN 70000 to DIN 79999
DIN TITLE STATUS DIN
REPLACEMENT OTHER ORG
REPLACEMENT
DIN 71412Lubricating nipples; cone type
Active
DIN 72311-1
Lead storage batteries; starter batteries for motorcycles, nominal capacities, main