DIMOVODNI PROGRAM Telefax: +385 (0)42 40 51 44 Internet stranica: http://www.lim-mont.hr Telefon: +385 (0)42 40 51 40 E-mail: [email protected]MB: 3449874 LIM-MONT d.o.o. poduzece za proizvodnju limenih proizvoda, trgovinu i usluge VRBANOVEC, B.Radica 8, 42232 Donji Martijanec, HRVATSKA (CROATIA) A ZA VAS, MI TO RADIMO NAJBOLJE! 0036 CPD 91265 001 M p r o i z v o d a t i OIB: 66502008806 Declaration of conformity with requests for system metal chimneys according to EN 1856-1 LIM-MONT d.o.o. VRBANOVEC, B.Radića 8 42232 Donji Martijanec, CROATIA Tel.: +385 (0) 42 40 51 40; Fax: +385 (0) 42 67 31 44 E-mail: [email protected]Internet page: http//www.lim-mont.hr ECO DIM DW Mr. Ivan Međeral, manager TÜV SÜDIndustrie Service GmbH Ridlerstraße 65, 80339 München, Germany Compressive strength – without distortion: DN 80 – 4,91 kN; DN 200 – 7,08 kN; DN 400 – 6,18 kN; Tensile strength: DN 80 – 1,23 kN and DN 200 – 1,68 kN with clamp S1 - 23,5mm,and DN 400 – 2,14 kN with clamp S4 -100mm Compressive strength of console: DN 80 – 11,04 kN; DN 250 – 12,65 kN; DN 600 – 11,04 kN Wind load resistance: Free end above last holder: 2,5 mfor DN 80 and DN 200 with clamp S1,and 3 mfor DN 400 with clamp S4 Flexural tensile strength: Non vertical instalation: biggest distance betveen two holders – 3 mfor DN 80 with clamp S1 , and 4 m for DN 200 with clamp S1 and DN 400 with clamp S4 Gas tightness: Satisfy standard criteria for all diameters. Results given in enclosures B2 Thermal resistance: From 0,242 m K/W to 0,296 m K/W at 200ºC for diameters from DN 80 to DN 600. Results given in enclosures B5 Condensate penetration resistance: Steadily – without changes on surface Izjava o sukladnosti sa zahtjevima na sistemske metalne dimnjake prema normi EN 1856-1 LIM-MONT d.o.o. VRBANOVEC, B.Radića 8 42232 Donji Martijanec, HRVATSKA Tel.: +385 (0) 42 40 51 40; Fax: +385 (0) 42 67 31 44 E-mail: [email protected]Internet stranica: http//www.lim-mont.hr ECO DIM DW gosp. Ivan Međeral, direktor TÜV SÜDIndustrie Service GmbH Ridlerstraße 65, 80339 München, Njemačka Tlačna čvrstoća – bez deformacije: DN 80 – 4,91 kN; DN 200 – 7,08 kN; DN 400 – 6,18 kN; Vlačna čvrstoća: DN 80 – 1,23 kN i DN 200 – 1,68 kN s obujmicom S1 - 23,5 mm, a DN 400 – 2,14 kN s obujmicom S4 -100 mm Tlačna čvrstoća konzole: DN 80 – 11,04 kN; DN 250 – 12,65 kN; DN 600 – 11,04 kN Otpornost opterećenju vjetrom: Slobodni kraj iznad zadnjeg držača: 2,5 mza DN 80 i DN 200 s obujmicom S1, a 3 mza DN 400 s obujmicom S4 Otpornost na savijanje: Horizontalna montaža: najveće odstojanje između dva držača – 3 mza DN 80 s obujmicom S1, a 4 m za DN 200 s obujmicom S1 i DN 400 s obujmicom S4 Plinopropusnost: Zadovoljava norme za sve promjere. Rezultati su dani u prilozima B2 Otpornost provođenju topline: Od 0,242 m K/W do 0,296 m K/W pri 200ºC za promjere od DN 80 do DN 600. Rezultati su dani u prilozima B5 Otpornost na kondenzat: Postojano – nema promjena na površini FOR YOU, WE DO IT BEST!
30
Embed
DIMOVODNI PROGRAM - Lim- · PDF fileLIM-MONT d.o.o. Vrbanovec Tel / Phone +385 (0)42 40 51 40 Fax +385 (0)42 40 51 44 e-mail info@ lim-mont.hr roatia Dimovodni program
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DIMOVODNI PROGRAM
Te le fax : + 3 8 5 (0 )42 40 5 1 4 4 In ternet s t ranica: http://www.l im-mont .hrTe le fon : +385 (0 )42 4 0 5 1 4 0 E - m a i l : i n f o @ l i m - m o n t . h r
MB: 3449874LIM-MONT d.o.o. p o d u z e c e z a p r o i z v o d n j u l i m e n i h p r o i z v o d a , t r g o v i n u i u s l u g e
V R B A N O V E C , B . R a d i c a 8 , 4 2 2 3 2 D o n j i M a r t i j a n e c , H R VAT S K A ( C R O AT I A )A
ZA VAS, MI TO RADIMO NAJBOLJE!
0036 CPD 91265 001
Mp r o i z v o d a t i
OIB: 66502008806
Declaration of conformity
with requests for system metal chimneys according to EN 1856-1
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
2
Toplinu potrebnu za zagrijavanje dobivamo izgaranjem krutog, tekućeg ili plinovitog goriva. Kod izgaranja bilo koje vrste goriva, javljaju se različiti neželjeni produkti izgaranja, koji su smjesa različitih plinovitih i krutih tvari. Uvriježeni naziv za produkte izgaranja je dim, koji na adekvatan način mora biti odveden.
Za proces odvodnje dima koriste se različiti dimovodni elementi, koji spojeni u svrsishodnu cjelinu čine dimnjak. Prema načinu upotrebe dimovodni program u LIM-MONT-u podijeljen je u tri zasebne skupine i to; jednostjeni dimovodni elementi (za sanaciju dimnjaka), izolirani (troslojni) dimovodni elementi (za gradnju novih dimnjaka) i priključni elementi (za povezivanje peći s dimnjakom).
Zajednička odlika našeg dimovodnog programa je; jednostavna i brza montaža, otpornost na vlagu i kiseline, vatrootpornost, relativno mala masa, visoka kvaliteta i povoljne cijene.
A1) Jednostjeni dimovodni elementiA2) Izolirani (troslojni) dimovodni elementiA3) Priključni elementiA4) Jednostjeni dimovodni element: na navojA7) Koaksijalni dimovodni elementiA9) Priključni element: za peći na kruto gorivo
DIMOVODNI PROGRAM
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Flue production line
Flue production line
Temperature necessary for heating can be obtained by combustion of solid, liquid or gaseous combustibles. As a result of combustion of any kind of combustible, different undesirable combustion products composed of gaseous and solid substances can be produced. The usual designation for combustion products is fume, which should be adequately vented.
For the process of venting different flue components can be used, which, if connected in appropriate entirety, compose a chimney. LIM-MONT has divided its flue products into three separate groups, according to their use: single wall flue components (for relining of chimneys), insulated (three-layer) flue components (for construction of new chimneys) and fittings (for connecting of stoves to chimneys).
The common distinctive feature of our flue production line is as follows: simple and quick assembly, moisture and acid resistance, fire resistance, relatively small weight, high quality and convenient prices.
A1) Single wall flue componentsA2) Insulated (three-layer) flue componentsA3) FittingsA4) Single wall flue components - threaded joitnsA7) Coaxial flue componentsA9) Fittings for solid fuel stores
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
3
Koriste se za sanaciju postojećih dimnjaka.Sanacija dimnjaka je potrebna u slučaju promjene
ložišta (pojava kondenzacije), pogrešnog presjeka i oblika te oštećenja postojećeg dimnjaka.
Jednostjeni dim. elementi su izrađeni iz nehrđajučeg čeličnog lima i kao takvi otporni su na kiseline koje nastaju pri kondenzaciji.
Kod spajanja dim. elemenata koriste se gumene brtve i spojnice. Tako spojeni dim. elementi nepropusni su za vodu i dimne plinove. Kod nemogućnosti spajanja dim. elemenata sa spojnicom, koriste se drugi spojevi (spojevi s navojem).
Elementi su relativno male mase, što im omogućava brzo zagrijavanje i postizanje radne temperature.
Montaža dim. elemenata kod sanacije je vrlo jednostavna i vrši se sa krova, spuštajući elemente u otvor postojećeg dimnjaka pri čemu je potreba za građevinskim radovima unutar objekta svedena na minimum.
Sve navedene karakteristike ukazuju da su jednostjeni dimovodni elementi najekonomičnija rješenja pri sanaciji postojećih dimnjaka.
JEDNOSTJENI DIMOVODNI ELEMENTI
MATERIJAL / MATERIAL: Debljina / [ifra i debljina materijala (xxx-xxxx):
Vrsta /
INOX 316 L BA (W.Nr. 1.4404 2R) s = 0,5 mm I10-0050
INOX 316 L BA (W.Nr. 1.4404 2R) s = 0,6 mm I10-0060
INOX 316 L BA (W.Nr. 1.4404 2R) s = 0,7 mm I10-0070
INOX 316 L BA (W.Nr. 1.4404 2R) s = 1,0 mm I10-0100
INOX 316 L BA (W.Nr. 1.4404 2R) s = 1,5 mm I10-0150
PREPORUČLJIVA I MINIMALNA DEBLJINA MATERIJALA PREMA PROMJERU D:
Promjer D (mm) / 80-300 350-500 550-750 800-1000
Debljina materijala Preporučljiva / s = 0,5 mm s = 0,6 mm s = 0,7 mm s = 1,0 mm
Minimalna / s = 0,5 mm s = 0,5 mm s = 0,6 mm s = 0,6 mm
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Used for relining of existing chimneys.Relining is necessary in case of furnace replacement
(occurrence of condensation), wrong chimney section and form, as well as in case of a damaged chimney.
Single wall flue components are made up of stainless steel, and are resistant to acids produced during condensation.
Rubber seals and couplings are used when joining flue components, so that flue components are water- and fume gasses-tight. If couplings cannot be used, other types of joining components are used (threaded joints).
Components are of relatively small weight, which allows their quick heating and reaching of desired work temperature.
The assembly of flue components for the purpose of relining of chimneys is very simple. It is performed from the roof by lowering down the components into the cavity of the existing chimney. That reduces the necessary masonry works inside the facility to the minimum.
All the aforementioned characteristics underline the fact that the single wall flue components are the most economic solution for relining of existing chimneys.
Single wall flue components
Thickness:Type: Material code and thickness (xxx-xxxx):
Recommended and minimal material thickness with respect to diameter D:
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
4
Spojevi dim. cijevi (muški i ženski dio): - do promjera 400 mm (spoj s gumicom i spojnicom S1) [tip proširenja S1] - od promjera 450 mm (spoj bez gumice sa spojnicom S4) [tip proširenja S4]
Primjer narudžbe: dimovodna cijev dužine 500 mm, promjera (D=200 mm), materijal (INOX 316 L BA), debljine (s=0,5 mm), tip proširenja S1
A1 020 I10-0050 0200 S1A1 020 xxx-xxxx yyyy tp
Grupa elemenata
Broj elementa
Upisati šifru materijala
Upisati promjer D (mm)
Tip proširenja
NAPOMENA:- ostali materijali, promjeri kao i specijalne izvedbe po dogovoru
BROJ ARTIKLA /
Podaci su informativnog karaktera. Lim-mont d.o.o. zadržava pravo izmjene podataka u bilo koje vrijeme bez prethodne najave.
Data are for informational purposes. Lim-mont d.o.o. reserves the right to revise these regulations at any time and without prior notice.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
NOTE:- other materials, diameters and special requirements upon agreement
Joining of flue pipes (male and female caps): - up to 400 mm diameter (rubber and coupling S1 joining) [expanding type S1] - up to 450 mm diameter (joining without rubber and coupling S4) [expanding type S4]
Components group
Component no.
Insert material code
Insert diameter D (mm)
ITEM NUMBER
Expansion type
Sample order: Flue pipe, 500 mm in length, diameter (D=200 mm), material (stainless steel 316 LBA), thickness (s=0.5 mm), expansion type S1
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Starting element with lateral condensate drainage (Type A)
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
8
Naziv artikla /
ODVAJAČ KONDENZATA S MUF - om ILI CIJEVČICOM SA STRANE
LOKBM A1 (140 ili / or 150) xxx-xxxx yyyy tpD 80 90 100 110 120 130
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Condensate drainage - lateral
Intermediate supporting plate
Smoke control element (without the thermometer plate)
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Smoke sampling element
Extractable TE 90°connection
TE 90° connection
Item name
Item name
Item name
TIP / TYPE OZNAKA ZA NARUDŽBU / ORDERING CODE
TIP / TYPE OZNAKA ZA NARUDŽBU / ORDERING CODE
TIP / TYP OZNAKA ZA NARUDŽBU / ZEICHEN FÜR BESTELLUNG TIP / TYPE OZNAKA ZA NARUDŽBU / ORDERING CODE
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
12
Naziv artikla /
ZATVARAČ CIJEVI S GUMOM (SILIKONSKOM) ZA ¨T¨ KOMAD
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Elbow 30° (2-segment)
Elbow 90° with inspection hole and metal
Item name
Item name
TIP / TYPE OZNAKA ZA NARUDŽBU / ORDERING CODE
TIP / TYPE OZNAKA ZA NARUDŽBU / ORDERING CODE
Shift of axis
Other alternates elbow and others dimensions same according agreement.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
16
Naziv artikla /
KOLJENO S OTVOROM I ZATVARAČEM S GUMOM (SILIKONSKOM) 90°
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
17
Naziv artikla /
REGULIRAJUĆE ČETVERODIJELNO KOLJENO S OTVOROM I ZATVARAČEM S GUMOM (SILIKONSKOM)
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Swivel elbow with inspection cover and expansion plug
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Wall bracket
Condensate collecting plate
Dilatation rossete
Plate
H1 (aaa) i H2 (bbb) - according to request The values in the table H1 = H2 = D+50 mm
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
LVRATAM A1 730 xxx-xxxx ss Visina / Height - L Širina / Width - L1
175 115
LPRODMAL A1 740 xxx-xxxxVisina / Height - L Širina / Width - L1 Duljina / Length - H
175 115 125
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
LVRATAV A1 760 xxx-xxxx ss Visina / Height - L Širina / Width - L1
285 190
LPRODMAL A1 770 xxx-xxxx ss Visina / Height - L Širina / Width - L1 Duljina / Length - H
285 190 125
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
28
Naziv artikla /
PRIKLJUČNA CIJEV H=250 mm SA REGULIRAJUĆOM KLAPNOM
Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Jednostjeni dimovodni elementi proizvode se do promjera 400 mm s proširenjem S1 (spoj s gumicom i spojnicom S1), te elementi promjera od 450 do 1000 mm i više s proširenjem S4 (spoj bez gumice sa spojnicom S4). Za promjer 60 mm raspoloživi su svi elementi osim cijevi duljine 1.0 m.
29Single wall flue elements from diameter 80 mm to diameter 400 mm are producing with extension S1 (connection with rubber and clamp type S1).Single wall flue elements from diameter 450 mm to diameter 1000 mm and more are producing with extension S4 (connection with rubber and clamp type S4). Diameter 60 mm are available in all other elements except 1,0 m linear element.
Single wall flue components
Tvrtka “LIM-MONT” izrasla je iz skromne limarske radionice osnovane 1975. godine, koja kasnije prerasta u zajedničku obiteljsku zanatsku radnju. Dobro vođenje poslovne politike, vrhunska kvaliteta proizvoda i povoljne cijene bili su garancija uspjeha i razvoja.
1989. godine radionica je prerasla u poduzeće sa 12 zaposlenih. Danas je “LIM-MONT” moderna obiteljska tvrtka sa 180 zaposlenih djelatnika i raspolaže sa cca 135.000 m2 proizvodno-skladišnog prostora na lokacijama u Vrbanovcu i Ludbregu.
Kvaliteta proizvoda tvrtke “LIM-MONT” prepoznata je i van granica Hrvatske, tako da su naši proizvodi našli svoje mjesto u zemljama bivše Jugoslavije, Švicarske, Rusije, te u zemljama članicama EU.
Od samog početka pa do danas, tvrtka se neprestano širi i nadopunjuje svoj proizvodni program, a poseban naglasak stavljen je na potpunu automatizaciju proizvodnje.
The “LIM-MONT” company has grown from small tin workshop established in 1975 into a family trade and crafts business. A guarantee of our success has always been a well-managed business policy, quality of products and low prices.
In 1989 the small workshop grew into a 12-employee company. Today “LIM-MONT” is a modern family company with 180 employees and has approximately 135.000 m2 of production and storage space at its disposal at two locations: in Vrbanovec and Ludbreg.
The quality or our products has been recognized outside Croatia as well, so that our products are present in the former countries of Yu-goslavia, Switzerland, Russia, and the EU member states.
From the very beginning, the company has constantly been expanding and developing its range of products with a special emphasis given to the full production automation.