120V AC dimmed power to Halo LED Downlights 120V AC Power (2 wire + Gnd typical) RL Retrofit - LED Downlight Series Dimming Guide and Step-down Transformer Application Note The RL LED Series provides continuous dimming with reverse or forward phase cut dimmers. RL4 Series - 80CRI RL56 600 Series - 80CRI RL56 900 Series - 80CRI RL56 1200 Series - 90CRI RL460WH827PK RL460WH830PK RL460WH835PK RL460WH840PK RL460WH827 RL460WH830 RL460WH830-C RL460WH835 RL460WH840 RL560WH6827 RL560WH6830 RL560WH6835 RL560WH6840 RL560WH-R RL560WH-C RL560WH6827R RL560WH6835R RL560WH6840R RL560WH9827 RL560WH9830 RL560WH9835 RL560WH9840 RL560WH12927 RL560WH12930 RL560WH12935 RL560WH12940 RL560WH12950 RL4 Series - 90CRI RL56 600 Series - 90CRI RL56 900 Series - 90CRI RL460WH927PK RL460WH930PK RL460WH935PK RL460WH940PK RL460WH927 RL460WH930 RL460WH935 RL460WH940 RL560WH6927 RL560WH6930 RL560WH6935 RL560WH6940 RL560WH6927R RL560WH6930R RL560WH6935R RL560WH6940R RL560WH9927 RL560WH9930 RL560WH9935 RL560WH9940 HALO ® Dimmer Features DEVINE (DAL06P) SKYE (SAL06P) TRACE (TAL06P) Rapid Start feature* Fully adjustable Fixed ON Fully adjustable Adjustable high-end trim Adjustable low-end trim • • • Wiring configurations Single-pole or 3-way Single-pole or 3-way Single-pole or 3-way Color change kits • • *Note: The Rapid Start feature is used to ensure the right amount of power boost during start-up. When a dimmer with Rapid Start is turned on from a low dimmer setting, the LED lighting may exhibit a momentary flash. Designated dimmer models offer an adjustment of the Rapid Start feature. The user may wish to adjust this setting to reduce the boost and resulting momentary flash. If this capability is desired, the user should select dimmer models noted as “fully adjustable” or “selectable ON or OFF” . Eaton's AL Series dimmers offer versatile options to set the mood and reduce energy consumption. Visit www.cooperwiringdevices.com/ALSeries for more information. RL56 recessed housing installation. Phase Control Dimming Dimmer Rating - Load Type INC = Incandescent HAL = Halogen MLV = Magnetic Low Voltage ELV = Electric Low Voltage CFL = Compact Fluorescent FLR = Fluorescent Dimmer Make or Series EWD = Eaton’s Wiring Devices ELC = Eaton’s Lighting Controls P&S = Pass & Seymour Harmony PA518057EN 6/15/2017
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
120V AC dimmedpower to Halo
LED Downlights
120V AC Power(2 wire + Gnd typical)
RL Retrofit - LED Downlight SeriesDimming Guide and Step-down Transformer Application Note
The RL LED Series provides continuous dimming with reverse or forward phase cut dimmers.
RL4 Series - 80CRI RL56 600 Series - 80CRI RL56 900 Series - 80CRI RL56 1200 Series - 90CRI
RL4 Series - 90CRI RL56 600 Series - 90CRI RL56 900 Series - 90CRIRL460WH927PKRL460WH930PKRL460WH935PKRL460WH940PKRL460WH927RL460WH930RL460WH935RL460WH940
Dimmer Features DEVINE (DAL06P) SKYE (SAL06P) TRACE (TAL06P)Rapid Start feature* Fully adjustable Fixed ON Fully adjustableAdjustable high-end trimAdjustable low-end trim • • •Wiring configurations Single-pole or 3-way Single-pole or 3-way Single-pole or 3-way
Color change kits • •
*Note: The Rapid Start feature is used to ensure the right amount of power boost during start-up. When a dimmer with Rapid Start is turned on from a low dimmer setting, the LED lighting may exhibit a momentary flash. Designated dimmer models offer an adjustment of the Rapid Start feature. The user may wish to adjust this setting to reduce the boost and resulting momentary flash. If this capability is desired, the user should select dimmer models noted as “fully adjustable” or “selectable ON or OFF”.
Eaton's AL Series dimmers offer versatile options to set the mood and reduce energy consumption.
Visit www.cooperwiringdevices.com/ALSeries for more information.
RL56 recessed housing installation.
Phase Control Dimming
Dimmer Rating - Load Type INC = IncandescentHAL = HalogenMLV = Magnetic Low Voltage
ELV = Electric Low VoltageCFL = Compact FluorescentFLR = Fluorescent
Dimmer Make or SeriesEWD = Eaton’s Wiring DevicesELC = Eaton’s Lighting ControlsP&S = Pass & Seymour Harmony
PA518057EN 6/15/2017
Dimmer Make
Dimmer SeriesDimmer Model #
Dimmer Rating
Dimmer Max
Wattage or Input Rating
Minimum Luminaires
(per circuit)
Maximum Recommended
Luminaires (per circuit)
Min Dimming
percentage (%)
Max Dimming
percentage (%)
Low End
Start Time
EATON Decorator DAL06P Triac (INC/HAL/MLV/ELV/CFL/LED) 300 W 1 29 5% 97% <1sEATON Toggle TAL06P Triac(INC/HAL/MLV/ELV/CFL/LED) 300 W 1 29 7% 97% <1sEATON Slide SAL06P Triac(INC/HAL/MLV/ELV/CFL/LED) 300 W 1 29 7% 98% <1sEATON Slide SLC03P Triac (INC/HAL/CFL/LED) 300 W 1 29 5% 98% <1sEATON Toggle DLC03P Triac (INC/HAL/CFL/LED) 300 W 1 29 5% 98% <1sEATON iLumin SC277-06-UN Control Panel( Leading Edge) 16 A 1 46 2% 100% <1s
Lutron Nova T NTFTU-5A Triac (Fluorescent) 5 A 1 53 17% 99% <1sLutron Maestro MAELV600 ELV 600 W 1 54 4% 97% <1sLutron Faedra FAELV500 ELV 500 W 1 45 3% 97% <1s
Lutron Diva DVELV303P ELV 300 W 1 27 1% 92% >1s2
Lutron Skylark SELV300P ELV 300 W 1 27 1% 94% >1s2
Lutron Nova T NTFTU-5A Triac (Fluorescent) 5 A 1 35 18% 97% <1sLutron Maestro MAELV600 ELV 600 W 1 36 4% 97% <1sLutron Faedra FAELV500 ELV 500 W 1 30 4% 97% <1s
Lutron Diva DVELV303P ELV 300 W 1 18 1% 91% >1s1
Lutron Skylark SELV300P ELV 300 W 1 18 1% 94% >1s1
Lutron Lumia LG-600PH 1 26 4% 98% <1sLutron Nova N-600 600 W 1 26 5% 97% <1s
Lutron Skylark S-600P 1 26 6% 93% >1s2
Lutron Centurion C-600P 600 W 1 26 5% 97% <1s
Lutron Ariadni AYLV-600P 450 W 1 20 2% 97% >1s2
Lutron Glyder GLV-600 450 W 1 20 5% 99% <1sLutron Diva DVLV-600P 1 20 6% 95% <1sLutron Lumina LG-103P 1000 W 1 44 4% 97% <1sLutron Skylark SLV-600P 450 W 1 20 4% 99% <1sLutron Nova NTLV-600 450 W 1 20 4% 97% <1sLutron Nova NT-600 600 W 1 26 5% 97% <1s
1. Up to 5 second start time for low end dimming.2. Does not turn on at low end dimming.
For Reference Only
9Eaton RA & RL Dimming Guide - PA518057EN
Dimmer Notes:
1) Start time is measured at the lowest dimmer setting.
2) Some LED dimmers have a "rapid start" design used to provide a momentary power boost to LED and CFL lamps during start-up. When a LED luminaire is on a dimmer with "rapid start" the boost may cause a momentary flash of the LED lighting. This "flash" is generated by the dimmer, and may be more noticeable when the dimmer is at a low setting. A solution is available with EATON dimmers which provide adjustment capability of the "rapid start": Devine (DAL06P), Accell (AAL06P), and Trace (TAL06P). Refer to product specifications online at www.eaton.com/lighting for more details.
Dimming Guide Disclaimer:
1) Leviton® is a registered trademark of Leviton Manufacturing Co. Inc.; Lutron® is a registered trademark of Lutron Electronics Co. Inc.; Lightolier® is a registered trademark of Philips Lighting; Hubbell® is a registered trademark of Hubbell Incorporated; Legrand® and Pass & Seymour® are registered trademarks of Legrand®. These companies and their tradenames, trademarks or brands, where noted, are associated with their respective company and are not associated with EATON.
2) Testing conducted by EATON is not a substitute for and does not imply certification by an independent laboratory or any other
standards certification. Refer to the manufacturer specifications for more detailed information on product certifications and standards.
3) This is a representative list of typical dimmers as tested by EATON lighting solutions business for performance with the designated LED luminaires only. Test data contained in this literature is based upon dimmers obtained in the marketplace. Information about these other manufacturers products is obtained from packaging and published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Dimmer performance and perceived limitations of the dimmers are based on factors outside of EATON's control. The specifications of these dimming controls and their conditions of use may change without notice to EATON lighting solutions or any other user. EATON lighting solutions makes no specific recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must ensure proper local and national electrical codes are followed; and that the dimmer application and condition of use is per dimmer manufacturer instructions and guidelines.
10 Eaton RA & RL Dimming Guide - PA518057EN
Transformer Load - H277 (300VA)1. H277 Transformer at full loading consumes a maximum of 16W of power. 2. When a dimmer or switch is on the secondary (120V) side of the transformer, power is
consumed by the transformer when the dimmer or switch is in “OFF” mode at 6.5W and in “ON” mode at 16W maximum under full loading.
3. When a dimmer or switch is on the primary (277V) side ahead of the transformer, power is consumed only in “ON” mode to a maximum of 16W under full loading. (Use of a dimmer ahead of the transformer is not recommended)
Transformer Load - H347 (75VA)1. H347 Transformer at full loading consumes a maximum of 15W of power. 2. When a dimmer or switch is on the secondary (120V) side of the transformer, power is
consumed by the transformer when the dimmer or switch is in “OFF” mode at 2.5W and in “ON” mode at 15W maximum under full loading.
3. When a switch is on the primary (347V) side ahead of the transformer, power is consumed only in “ON” mode to a maximum of 15W under full loading. (Use of a dimmer ahead of the transformer is not recommended)
Transformer Load - H347200 (200VA)1. H347200 Transformer at full loading on 120V side consumes a maximum of 28W of power.2. When a dimmer or switch is on the secondary (120V) side of the transformer, power is
consumed by the transformer when the dimmer or switch is in “OFF” mode at 9.2W and in “ON” mode at 28W maximum under full loading.
3. When a switch is on the primary (347V) side ahead of the transformer, power is consumed only in “ON” mode to a maximum of 28W under full loading.
When a switch is on the primary (277V) side ahead of the transformer, power is consumed only in “ON” mode to a maximum of 12W under full loading. (Use of a dimmer ahead of the transformer is not recommended)
Step Down TransformersH277 = Steps 277 line voltage down to 120 volts. Attaches to knockout on first fixture’s junction box in a circuit and is 300VA rated. H277 is a UL recognized Component listed under the luminaire UL/cUL listing for Halo Non-IC housings.
H347 and H347200 = Steps 347 line voltage down to 120 volts. Attaches to knockout on first fixture’s junction box in a circuit. H347 is 75VA and H347200 is 200VA rated. H347 is a CSA/UL Listed Component for use under the luminaire UL/cUL listing with Halo Non-IC housings.
H347347V Step Down Transformer, 75VA
2-7/8
2-1/2”[63mm]
2-3/4”[70mm]
H347
H347200347V Step Down Transformer, 200VA
2-7/8
2-3/16”[56mm]
4-3/4”[121mm]
H347200
H277277V Step Down Transformer, 300VA
2-7/8
2-3/16”[56mm]
4-3/16”[106mm]
H277
Application Note - H277, H347 and H347200 step-down transformers are qualified to drive multiple Halo LED on a single circuit in Non-IC construction. Installation of these transformers with individual LED fixtures on circuits with multiple LED loads is not recommended. This is not recommended due to resulting multiple inductive currents pulled by each transformer; in this situation the majority of the power would then be reactive (VARS) and not real (WATTS). If H277, H347 or H347200 transformers should be used individually on each LED fixture in a single circuit, then that circuit should be sized for lowered power factor as well as increased apparent power on the circuit. H277, H347 and H347200 are UL/cUL listed for use with Halo recessed housings: H750T, H750TCP, H7T, H7TNB, H7RT.
RL56 Retrofit LED Downlight Series(RL56 Maximum Units on Step Down Transformer Powered Circuits)
Max # of FixturesTransformer VA Rating 600 Series 900 Series
H277 300 24 16
H347 75 6 4
H347200 200 16 10
11Eaton RA & RL Dimming Guide - PA518057EN
Ground
*Use of a dimmer ahead of the transformer is not recommended
*Use of a dimmer ahead of the transformer is not recommended
277V120V
Hot HotTransformer
Switch*
NeutralNeutral
LED LED LED
Transformer with Switch on 277V Primary
347V Switch*
347V120V
Hot HotTransformer
NeutralNeutral
LED LED LED
Ground
Transformer with Switch on 347V Primary
277V (347V) 120V
HotTransformer
Hot
NeutralNeutral
LED LED LED
Ground
Transformer with Dimmer/Switch on 120V Secondary
Dimmer Neutral Connection typical with some Dimmers
120V Dimmer or Switch
Eaton1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting
Specifications and dimensions subject to change without notice.