LED Approach Flash Lighting System Dimensions URL: http:www.nelt.co.jp/ TEL : +81-(0)3-6746-1770 E-mail : [email protected]Lighting Unit : FX-AVC-01 FX-AVC-01 LED flashing supports safe landing of aircrafts Lighting quality equivalent to Xenon (Dimmable) 20 years Maintenance free design Significant Energy Saving Controller Unit : FX-C-3 Power Unit : FX-AVC-02 Ø62 Ø70 149 228 3-M8 413 287 Ø286 53 261 45 ■ Lighting Unit FX-AVC-02 ■ Power Unit FX-C-3 ■ Controller Unit Front Front Front Top Back Side Side Side 300 (349) 6 600 800 600 100 700 650 50 530 328 413 20
2
Embed
Dimensions LED Approach Flash Lighting SystemNEC Approach Flash Lighting System Remarks Descriptions Lighting Unit Power Unit Controller Unit Dimensions (mm) 287 x 228 x 413 530 x
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
LED flashing supports safe landing of aircraftsLighting quality equivalent
to Xenon (Dimmable)20 years
Maintenance free designSignificant Energy Saving
Controller Unit : FX-C-3
Power Unit : FX-AVC-02
Ø62
Ø70
149
228
3-M8
413
287
Ø286
53
261
45
■ Lighting Unit
FX-AVC-02■ Power Unit
FX-C-3■ Controller Unit
Front
Front
Front
Top
Back Side
Side
Side
300
(349)
6600
800
600
100
700650
50530 328
413
20
2A,2ms
2ms
Constant current plus emitting
Xenon 500VA Xenon Lump 500H
LED 107VA LED Module 40,000H
20 years maintenance free
■ Energy Saving (Power Consumption) ■ Less Maintenance (Life Time)
Heater ElectrodesHeater Electrodes
■ Front panel heating test data
■Center of Front Panel ………………………… 25±5K■Maximum Temp ………………………………… 40K■Time to reach 80% of Maximum Temp …… 7 minutes
Benefits Approach Flash Lighting System Applications
Brief Technical DataNEC Approach Flash Lighting System Remarks
Descriptions Lighting Unit Power Unit Controller UnitDimensions (mm) 287 x 228 x 413 530 x 328 x 413 600 x 300 x 800Weight (kg) 5.6 30 58.6Timing Signal Voltage AC100V・pulse 30mS to 40mSMonitor Signal 1KΩ Normal Condition = ∞Flash Frequency 120/minutesLight Output High 6,000cd - 20,000cd +10%
Middle 600cd - 2,000cd +10%Low 100cd - 450cd +10%
Power Consumption Heater Off High: 70.0W Middle: 22.0W Low: 18.0WHigh: 107.0VA Middle: 31.0VA Low: 24.0VA
Heater Power Consumption 10WAdjustable Vertical Angle 0°to 30°Operating Temperature -40℃ to 55℃IP Rating IP66Material Aluminum and Stainless SteelCompliances ICAO Annex 14 vol. 1
JCAB Lighting Spec # 356FAA L-849E/EB-67D ( Apprication process underway)
Center value of Beam
Frigid Environment Field Test @ Shin-Chitose Airport in Hokkaido
① SFL (Sequenced Flashing Lights)
③ AGL (Approach Guidance Lights)
④ RAI (Runway Alignment Indicators)
② REIL (Runway End Identifier Lights) RWYTIL (Runway Threshold Identification Lights)
Ingress Protection Field Test @Naha Airport in Okinawa
High output Flip-chip LEDLED Module
700lm×1,184 pieces≒830,000 lumens
High density mounting
2A
2.1mm□LED
Achieved Lighting Quality equivalent to that of conventional Xenon lump
Significant Enaergy Saving and 20 years maintenance free design
Safety operation by Laminated Heater (Optional)
LED module decreases 80% of power consumption and increases significant life time compared withXenon lump*
Secure safety operation in a frigid environment
Other Key Features・Lighting-up time adjustment function for the reduction of the load on boot-up.・Luminance back-up function in case of LED circuit failures by the adjustments of flashing time. (* Middle and Low mode only. Up to 7/16(total) LED circuit failures.)・Self diagnosis function for each Lighting Unit.
Prevents the front panel from freezingby the laminated heating technology
*Conditions:Operating hour=5H/day, No heater operation, Life time:Xenon=500H. LED=40,000H
(Flashing simultaneous right and left once per 0.5sec)