YEAR1sem2 DIGITAL DESIGN MODULE 2011/12 DESIGN_CONCRETE_OBJECTS The pictures are only indicative to describe a process. From a simple 2d sketch to a 3d model and then unfolded in strips ready to be printed and reassembled.
8/2/2019 Digital Design Brief
http://slidepdf.com/reader/full/digital-design-brief 1/2
YEAR1sem2 DIGITAL DESIGN MODULE 2011/12 DESIGN_CONCRETE_OBJECTS
The pictures are only indicative to describe a process.
From a simple 2d sketch to a 3d model and then unfolded in strips ready to be printed and reassembled.
8/2/2019 Digital Design Brief
http://slidepdf.com/reader/full/digital-design-brief 2/2
Digital Design concrete
Concrete was used in the ancient world to create strong enduring structures such as the Pyramids and the
Colossuem. Whilst this man-made material has not changed significantly since those times, the way that man
produces concrete structures has undergone dramatic developments. Modern concrete mix additives andmoulding processes have resulted in a ‘liquid stone’ which has great versatility. Contemporary concrete’s
wonderfully expressive nature has been used to great effect by architects such as Frank Lloyd Wright and Le
Courbusier, and is used by modern architects such Zaha Hadid to create innovative, gravity defying fluid
structures.
Even though concrete remain a quite cheap solution the real challenge in architecture is to produce a mould
able to deliver a shape with new characteristics and qualities. This exercise presents an opportunity to
understand the connection between 3d modeling and physical modeling considering the complexity of the
geometry and the nature of the material itself associated with the technology.
The assignment for this module of Digital Design is to produce an object in 3D and then transfer in a physical
model using casting/moulding techniques.
You need to document the process in your portfolio and precisely you need to describe your 3d modelingprocess, how you translate information from 3d to 2d and finally visualize your design using Vray for Rhino
How to cast concrete shapes
Do your design first. Sketch it out so you can understand better proportions and complexity so only then you
can create your 3d model in rhino. Once your 3D model is done you need to unfold it and turn all the faces
flat and finally print your cut template. Using cardboard or PVC you can cut profiles and with tape or glue you
will assemble the final model. Completed the model make sure is strong enough to support the cement.
Setup a box where to do the casting, place inside your model and then you can mix cement with water to
achieve a soft mix able flow smoothly in your shape previously created.
Specification
The size of the cast your object must to be 21cm by 30cm with 15cm height
You can create your shape you can use cardboard, mdf or pvc and use glue or tape to assemble it.
The process must to be documented in your portfolio.
Course material
Please find on the blackboard all the relevant tutorials.