DA 428 DIGITAL AMPLIFIER i ELECTRONIC • Digitale Controller Endstufe, 4-Kanal • Kombiniert digitale Verstärkertechnologie mit einem leistungsstarken 16-Core- DSP mit Matrix-Router und umfassenden Audio-Funktionen • Audio-optimiertes Schallnetzteil mit PFC für geringste Netzrückwirkung/-störung • Roadtauglicher Aufbau, Upside-Down-Design der Elektronikkomponenten minimiert die Schmutzablage • Leichtgewichtige, hoch stabile Konstruktion • Digital controller amplifier, 4-channel • Includes digital amplifier technology with a high performance 16-core-DSP with matrix router • Audio optimized switched mode power supply with PFC against circuit feedback • Upside-down design for raod suitability • Light-weighted and robust construction BEDIENELEMENTE / CONTROL ELEMENTS SD-Kartenslot SD-card reader 4 RGB LEDs 4 RGB LEDs 4 Drehregler mit Druckfunktion 4 rotary encoders LCD-Grafikdisplay LCD-display Navigationspad navigation pad Netz -Anschluss & -Sicherung, Ground-Free mains -socket & -fuse, ground-free switch Signaleingänge (XLR): 4 x Line-In, 4 x Link-Out (max 4 analog od. 2 digital + 2 analog) signal inputs (XLR): 4 x line-in, 4 x link-out (max 4 analogue or 2 digital + 2 analogue) Lautsprecherausgang 4 x Speakon NL 4 speaker output 4 x Speakon NL 4 Modulschacht (seriell RS232) modul slot (serial RS232) Ausgang A und B sind jeweils doppelt belegt (A/C und B/D). Als digitale Eingangssignale werden AES/EBU sowie S/PDIF mit jeweils 16-24 Bit und 32-192 kHz akzeptiert, vom Gerät generiert wird AES/EBU mit 24Bit und 48 kHz. Ein weiteres Features ist das PFC- unterstützte Weitbereichs-Schaltnetzteil (SMPS). Umfangreiche Schutzschaltungen und di- gitale Überwachungsfunktionen runden die professionelle Ausstattung dieses Gerätes ab, dessen breitbandige Anwendungsmög- lichkeiten vom Monitorbetrieb über den Systembetrieb mit passiven PA Komponen- ten (In aktiv getrennten PA- Anlagen) bis hin zur Realisation von Mehrkanalsystemen in Festinstallationen reichen. BESCHREIBUNG / DESCRIPTION Die DA 428 ist ein vollständig digitaler Class-D Hochleistungsverstärker mit 4 Kanälen mit jeweils 700 W Ausgangs- leistung an 4 Ohm Last. Das kompakte, leichtgewichtige 19“-2HE - Gerät enthält zunächst umfassende Audio-DSP- Funktionen wie Matrix-Router, 8 voll parametrische EQs, 2 Frequenzweichen, Delay und Dynamikprozessor. Alle Parameter dieser Module sowie weitere Eingaben werden direkt über das 5-Tasten- Navigationspad und 4 Drehgeber mit Tastfunktion am Gerät eingestellt. Factory- und User- Presets können im Gerät abgespeichert werden, zudem steht ein SD- Speicherkartenslot zur Verfügung. Mit der The DA 428 is a completely digital 4- channel class D amplifier with 700 W @ 4 ohm output power. This compact, light- weight 19“ 2U device is equipped with comprehensive DSP features like matrix router, 8 fully parametric equalizers, two crossover networks, delay and dynamic processor. All parameters as well as user navigation can be managed using a simple 5-key navigation pad together with 4 rotary encoders. Factory and user presets can of cause be stored inside the unit as well as on the implemented SD- card reader. With the available software "Preset-Editor" Software "Preset-Editor" können Setups vorkonfiguriert und über einen SD-Karten Transfer übertragen werden. Ein Modul- schacht für Anbindung an Audio- und Kontrollnetzwerke ist integriert und serien- mäßig mit dem Standardmodul RSNC ausgestattet, welches eine RS232- Schnittstelle und einen NC-Meldekontakt beinhaltet. Optional verfügbar ist ein Dantemodul mit Remotefunktionalität. Eingangsseitig stehen 4 analoge oder 2 digitale Anschlüsse zur Verfügung, welche auch kombiniert genutzt werden können. Weiterhin stehen Link- Buchsen für das jeweils benutzte Eingangssignal zur Ver- fügung. Ausgangsseitig stehen 4 Neutrik Speakon-Buchsen zur Verfügung. setups can be prepared in advance and transfered via SD- card. A module slot for connections to audio / control networks is standard fitted with a RSNC modul equipped with a RS232 connector and a ´normally closed´ contact feature. Optionally available is a module with remote functions. On the inputs side are 4 analogue connections as well as 2 digital ports accepting AES/EBU and SPDIF formats of 16 to 24 bit and 32 to 192 kHz sampling frequency. 4 link sockets, carrying the signal applied to the inputs can be routed carrying AES/EBU of 24 bit / 48 kHz. 4 Neutrik Speakon sockets ensure the connection to the speaker systems. Output A and B provide 2 channels each (A/C and B/D). Another important feature is the PFC controlled, widerange switched mode power supply. An extensive set of protective circuits and digital monitoring components is included "rounding off" the professional features of this equipment usable for stage monitor operation to system operation of passive PA components or realization of professional multichannel systems within sound installations.