www.acmeairequipments. com
Jun 12, 2015
www.acmeairequipments.com
www.acmeairequipments.com
Pneumatic conveying
Pneumatic conveying involves the transfer of powders, particles, granules and other materials through enclosed pipelines. It involves combining different pressures and flow of gases such as nitrogen to make the movement process a success.
www.acmeairequipments.com
Central vacuum cleaning Central vacuum cleaning involves the removal of dirt and debris from buildings. The dust particles are sent through a tubing network installed within the walls to a collection centre. Central vacuum cleaning is done by using a vacuum cleaner.
The cleaner has a power unit permanently fixed and a collection container where dust particles are collected. Inlets are then installed throughout the building attaching power hoses to the vacuum accessories which remove the dust from the building.
www.acmeairequipments.com
Roots blower and compressors Roots blower and compressors operate through complex processes where fluid is pumped with meshing lobes. The fluid is held in pockets surrounding the lobes. From there they are carried to the exhaust.
Most root blowers or compressors are capable of pumping large volumes of but since they cannot achieve maximum compression, most of the time you find the multiples of them with intercoolers.
www.acmeairequipments.com
Vacuum booster Vacuum booster allows air to be sucked out of the booster through the checking valve. This valve is very important since it make sure that even if air leaks, it does not enter the vacuum booster.
Since the booster has to provide enough power for the driver to make several stops in case the engine stops running without losing the braking power.
www.acmeairequipments.com
Vacuum pump
Pneumatic conveying involves the transfer of powders, particles, granules and other materials through enclosed pipelines. It involves combining different pressures and flow of gases such as nitrogen to make the movement process a success.
www.acmeairequipments.com
Dust collection
Dust collection involves the improvement of air quality and safety through removal of dust particles from the air or the environment.
Dust collection is achieved through the principles of capture, convey and then collect with dust collector system. The dust is first captured from its source; it is then conveyed through the ducting system and finally collected.
www.acmeairequipments.com
Aeration in storage silos
Aeration in storage silos is done in order to provide a continuous discharge of materials such as dust particles. This is done through the use bulk materials release systems.
The systems must be designed effectively in order to ensure there is continuous flow so as to provide for proper emptying of the storage facility and reduce the residue materials left in the silos.
www.acmeairequipments.com
Dewatering
Dewatering is the removal of water from solid materials through a process of wet classification, filtration, centrifugation or other separation processes. Dewatering can be done in a construction site, a riverbed or a mine shaft. The process is achieved through pumping or evaporation.
www.acmeairequipments.com
Air-drying
Air-drying is the process through which the amount of steam is decreased from the air by using several methods. The process of air-drying is achieved through various processes, which include lowering the air temperature, heating and ventilation, condensation drying and lastly sorption drying.
www.acmeairequipments.com
Contact Us
Acme Air Equipments Company Pvt. Ltd.
Plot - 57 / 3, 4, 5, Phase I, B. Road,GIDC, Vatva,
Ahmedabad - 382445Gujarat, India
Phone:- +91 98240 60792Email: [email protected]
www.acmeairequipments.com
ACME AIR EQUIPMENTS CO. PVT . LTD.
THANK YOU