Differeciation List Old New. 1 、 PCBA Pcba model No.PZ186 (OLD)Pcba model No.PZ186 (NEW)

Differeciation List

Old New

1 、 PCBA

Pcba model No.PZ186 (OLD) Pcba model No.PZ186 (NEW)

2 、 ASSEMBLY

OLD :No need soldering the BT antenna New : need soldering the BT antenna

旧主板此处无蓝牙天线焊盘

新主板此处有蓝牙天线焊盘

1

New

with BT antenna connector

Old

Without BT antenna connector

2

New

With 3 component

old

Without

3 、 IMEI LABEL 　

Old New

SW Version 1.0.6 SW Version 2.02

4 、 carton label

Old New

旧主板软件版本为 1.06

新主板软件版本为 2.02

10/2012 11/2012

5 、 GB label 　

Old New

91112320-04

91112320-05

6 、 sw version in handset

Old HW

New HW

PZ286FM_KMOEB_karbonn_A1_FOREIGN_V2.0.2

PZ186FN_KMO_FOREIGN_v1.0.6

PZ186FM_KMOEB_karbonn_A1_FOREIGN_V2.0.3

Note:please make sure that the sw is correct before flash ,otherwise the TP would not working if used the incorrect sw

7 、 HW info

8 、 SW tool (important)

Dnot use this Tool (orange ),please delete it from your PC

Use this Tool (Green) only, it is along with the released SW

9,How to solve CFT issue

1,open the tool of “Factory download [FixNV(pz186 pz286)]”2,connected the mobile with SW data cable (data cable switch on);3;press the “start”;4;input the battery ;5,Done ,take out the battery ;6,Rewrite the IMEI ;6,please flash the correct sw (PZ186 or PZ286)according to the Item 6.

Note :1,the tool of “Factory download [FixNV(pz186 pz286)]” is only allowed to be used for the handset with “CFT” issue.2, the tool of “Factory download [FixNV(pz186 pz286)]” is not allowed to be used for other handsets; 3,please delete the tool of “Factory download [FixNV(pz186 pz286)]”once the issue of “CFT” solved.