Alura Trailer Mobile Workshop Systems ๏ Diesel Generator ๏ TIG / Electrod Welding ๏ MIG / MAG Welding ๏ Hand Grinders ๏ Hand Drille ๏ Hand Tools ๏ Air Compressor ๏ High pressure washing ๏ Column Drilled ๏ Lahte Mahcine / 1.000mm ๏ Mobile Starting Assistance ๏ Grinders ๏ Crane / 1 ton ๏ Workbench / 1 16 www.aluratrailer.com
16
Embed
Diesel Generator TIG / Electrod Welding Hand Drille Hand Tools...control connector * check control at starting * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Standby PowerStandby power is defined as the maximum power available during a variable electrical powersequence, under the stated operating conditions, for which a generating set is capable of delivering in theevent of a utility power outage or under test conditions for up to 500 hours of operation per year under average of 70% load. Overloading is not permissible.
Prime PowerPrime power is defined as being the maximum power which a generating set is capable of delivering continuously whilst supplying a variable electrical load. Average load should be 70%. The generator canbe overloaded 10% for 1 hour per 12 hours.
Engine
Manufacturer PERKINS
Model 403A15G2
No of Cylinder / Configuration 3 INLINE
Displacement lt 1,5
Bore / Stroke mm 84 / 90
Compression Ratio 22,5:1
Aspiration Naturally Aspirated
Governor Type MECHANIC
Cooling System WATER
Coolant Capacity lt 6
Lubrication Oil Capacity lt 4,56
Electrical System VDC 12
Speed / Frequency 1500 rpm / 50 Hz
Engine Gross Power kWm 15,4
Fuel Consumption lt/h
110 % 5,04
100 % 4,3
75 % 3,11
50 % 2,24
Exhaust Outlet Temperature °C 470
Exhaust Gas Flow m³/min 2,2
Combustion Air Flow m³/min 1,08
Cooling Air Flow m³/min 25,2
Alternator
Manufacturer MARELLI
Model MJB160SA4
No of Phase 3
Power Factor 0,8
No of Bearing SINGLE
No of Poles 4
No of Leads 12
Voltage Regulation ( Steady State) ± %1
Insulation Class H
Degree of Protection IP 23
Excitation System AVR (Automatic Voltage Regulator), Brushless
Connection Type STAR
Total Harmonic Content (No Load) < %2
Frequency Hz 50
Voltage Output VAC 230 / 400
Rated Power (Standby) kVA 18,7
Efficiency % 85,6
W x L x H (mm) Weight (kg) lt Fuel Tank (lt) Noise dB(A)
@ 1m
Canopied 700 x 1750 x 1200 520 75 70
Open Skid 700 x 1250 x 950 370 75 TBA
Technical information and values are according to ISO8528, ISO3046,NEMA MG1.22, IEC 600341, BS 49995000, VDE 0530 standards. Producing with ISO9001, ISO14001, OHSAS18001, TSE, CE standards. All information given in this leaflet is intended for general purposes only. Due to a policy continuous improvement Teksan reserves the right to amend details and specifications without notice and all information given is subject to the Teksan's current condition of sales.
TBA: To Be Ask TBD: To Be Determined NA: Not Avaliable N/A: Not Applicable TTD16PE5A0314EN
Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct andalternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper,nickel, magnesium and their alloys. Characteristics: TIG regulations: post gas, current down slope/time, bi-level, balance * MMAregulations: arc force according to the type of electrode in use * 2/4 times operation * hot start and anti-stick devices * remotecontrol connector * check control at starting * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic,overcurrent, overvoltage, undervoltage protections. Complete with TIG welding accessories.
WELDS ALL METALS AESTHETICS QUALITYWITH PULSE WELDING
PARAMETERS DIGITALADJUSTMENT
FIT FOR REMOTECONTROLS
PERSONALIZATIONADVANCE PARAMETERS
Technical Data
Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10
V50/60Hz A A EN60974-1 A EN60974-1 V A A852031 230 5 200 100 100 20 34
Microprocessor controlled, MIG-MAG/BRAZING synergic welding machine, with built-in 4 rolls wire feeder. It is particularlysuitable for use in light metal works and body shop, for welding galvanised sheets, HSS high strength steel, stainless steel andaluminium sheets. The innovative SYNERGIC DIGIDESK technology allows for a rapid and easy setting of the weldingprogrammes and grants always a high control both of the arc and of the quality of the welding. Characteristics: automaticsetting of wire speed according to the features of the material being welded, the shielding gas and the wire diameter *monitoring of power voltage supply * 2/4 strokes, spot operations * automatic torch recognition * regulation of wire speed upslope, post gas time, wire burn-back time * use with spool gun torch * thermostatic protection. Complete with MIG-MAGwelding accessories.
Technical Data
Standards: LVD: EN 60974-1 LVD: EN 50445 EMC: EN 60974-10
V50/60Hz A A EN60974-1 A EN60974-1 V kW A820030 230 / 400 40 300 215 41 7,5 16 / 10
3 ph 320 25 % 11
cosphi nr mm mm mm mm cm(L,W,H)0,9 12 0,6 0,8 0,8 0,8 IP22 87
Product Model Flow Pressure Motor Electrical Weight Code (l / h) (bar) power (kg) (hp)
R10203 ST 200 PS 900 200 bar 7,5 hp 380V-3 50 Hz 74 kg
Features:
Trigger controls The most robust on the market with 1.5 liters of oil sump pumps 30 years experience IE2 motor with energy efficiency standards Chemical mixtures adjustable dosage syringe Chemical / foam spray 12m high pressure hose 500 liter stainless steel water tank.
SpecificationCenter height mm 330Distance between centers mm 1000Swing over bed mm 660Swing over carriage mm 460Swing in gap mm 850Width of bed mm 400Spindle nose DIN55022 N8 N11Spindle hole diameter mm 72-80-104Number of speed 16Range of spindle speed rpm 11.2-2000Number of feeds 144Range of longditudinal feeds mm/rev 0.039-24Range of transversal feeds mm/rev 0.0195-12Number of threads 288 (72x4)Metric mm 0.5-240inch " 60-1/8Module M 0.125-60DP DP 240-0.5Cross slide travel mm 350Tailstock quill diameter mm 75Quill travel mm 200Quill taper morse 5Main drive kW 7.5-11Length (For DBC 1m) mm 2550Width mm 1290Height mm 1510Weight (DBC 1 m) kg 1500
Battery rated voltage 12 VStarting assistance current 700 ABattery jumper cable cross-section 25 mm²Battery jumper cable length 2 mWeight 15.0 kgDimensions (W x H x D) 216 x 272 x 277 mmSafety class (DIN 40530) IICharging status display ✓Reverse polarity and fault indicator ✓Starting without battery/with exhaustively discharged battery After manual releaseElectronics protection ✓Reverse polarity protection ✓Overload protection ✓Back-up mode ✓Starting assistance ✓Charging on vehicle electrical system ✓
� / �12 16 www.aluratrailer.com
Product İnfo:
Starting assistance with no interference and voltage peaksReverse polarity protectionMobile starting assistanceBack-up mode up to 50 AStarting possible even with battery removed or defectiveProtection against overcharging / exhaustive dischargeBAT 250 can be charged via 12 V car socket.