Diesel Generator set VTA28 series enginecummins05.cummins.com/Common/Systems/CPGKent.nsf... · Diesel Generator set VTA28 series engine Power Generation Power Generation Description
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Diesel Generator setVTA28 series engine
PowerGeneration
PowerGeneration
Description
This Cummins® Power Generation commercial generatorset is a fully integrated power generation system,providing optimum performance, reliability, and versatilityfor stationary standby, prime power, and continuous dutyapplications.
This generator set is available with CEcertification.
All enclosed products are designed to meetor exceed EU noise legislation 2000/14/ECstep 2006.
This generator set has been designed tomeet or exceed ISO8528 regulation.
This generator set is designed in facilitiescertified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002.
Features
Cummins® Heavy-Duty Engine - Rugged 4-cycleindustrial diesel delivers reliable power, low emissionsand fast response to load changes.
Permanent Magnet Generator (PMG) - Offersenhanced motor starting and fault clearing short circuitcapability.
Alternator - Several alternator sizes offer selectablemotor starting capability with low reactance 2/3 pitchwindings; low waveform distortion with non-linear loads,fault clearing short-circuits capability, and class Hinsulation.
Control System - Standard PowerCommand® electroniccontrol provides total system integration including remotestart/stop, precise frequency and voltage regulation,alarm and status message display, AmpSentry protection,output metering, auto-shutdown.
Cooling System - Standard integral set-mountedradiator system, designed and tested for rated ambienttemperatures, simplifies facility design requirements forrejected heat.
Enclosures - Optional weather-protective and sound-attenuated enclosures are available.
Warranty and Service - Backed by a comprehensivewarranty and worldwide distributor network.
The PowerCommand™ 3100 Control is a microprocessor-based generator set monitoring, andcontrol system. The control provides an operatorinterface to the genset, digital voltage regulation, digitalgoverning and generator set protective functions.
The PowerCommand™ 3100 generator set control issuitable for use on a wide range of generator sets innonparalleling and paralleling applications.
The PowerCommand™ Control can be configured for anyfrequency, voltage and power connection configurationfrom 120 to13,800 VAC for for 50Hz or 60Hz operation.
Power for the control is derived from the generator setstarting batteries. The control functions over a voltagerange from 8VDC to 35VDC.
Major Features
• Digital Governing and Voltage Regulation, includingdigital overcurrent fault regulation.
• Digital Voltage Regulation with 3-phase sensing.
• AmpSentry™ Protection for true alternator overcurrentprotection.
• Analog and Digital AC Output Metering.
• Battery Monitoring System to sense and warn against aweak battery condition.
• Digital Alarm and Status Message Display.
• Generator set Monitoring: Displays status of all criticalengine and alternator generator set functions.
• Smart Starting Control System: Integrated fuel rampingto limit black smoke and frequency overshoot.
• Advanced Serviceability using InPower™, a PC-basedsoftware service tool.
Control System
Includes all functions to locally or remotely start andstop, and protect the generator set.
Control Switch - RUN/OFF/AUTO
OFF Mode - the generator set is shut down andcannot be started.
RUN mode the generator set will execute its startsequence.
AUTO mode, the generator set can be started with astart signal from a remote device.
LED Indicating Lamps – includes LED indicatinglamps for the following functions:
Not-in-auto mode Common wiringShutdownPhase and scale indicationFault reset switch. Allows the opperator to reset thecontrol after warning or shutdownEmergency stop switch - imediately shuts down thegenerator set operation
Base Engine ProtectionOverspeed shutdownLow Oil Pressure Warning / ShutdownHigh Engine Temperature Warning / ShutdownUnderspeed / Sensor Fail ShutdownFail to Start / Fail to CrankLow / high battery voltage
Options
Integrated PowerCommand Digital Paralleling ControlsKey Type Mode Selector SwitchExhaust Temperature MonitoringPowerCommand NetworkRefer to the PowerCommand Controls Technical Bulletinfor detailed information(S1025C-Non-Paralleling / S1005c-Paralleling)
Emergency Standby Power (ESP): Applicable for supplying power to varying electrical loadfor the duration of power interruption of a reliable utilitysource. Emergency Standby Power (ESP) is inaccordance with ISO 8528. Fuel Stop power inaccordance with ISO 3046, AS 2789, DIN 6271 and BS5514.
Limited-Time running Power (LTP): Applicable for supplying power to a constant electricalload for limited hours. Limited Time Running Power (LTP)is in accordance with ISO 8528.
Prime Power (PRP): Applicable for supplying power to varying electrical loadfor unlimited hours. Prime Power (PRP) is in accordancewith ISO 8528. Ten percent overload capability isavailable in accordance with ISO 3046, AS 2789, DIN6271 and BS 5514.
Base Load (Continuous) Power (COP): Applicable for supplying power continuously to aconstant electrical load for unlimited hours. ContinuousPower (COP) in accordance with ISO 8528, ISO 3046, AS2789, DIN 6271 and BS 5514.
This outline drawing is to provide representativeconfiguration details for Model series only.
See respective model data sheet for specific modeloutline drawing number.
Do not use for installation design.
Cummins Power Generation
Europe, CIS, Middle East and AfricaManston Park Columbus Ave.Manston RamsgateKent CT12 5BF United KingdomPhone 44 1843 255000Fax 44 1843 255902