Dienstleistungsverzeichnis MPA NRW Specification of services offered by MPA NRW
Dienstleistungsverzeichnis MPA NRW
Specification of services offered by MPA NRW
Inhalt / contents
■ Strahlenschutz - Personendosimetrie 1-2 ■ Radiation protection - Personal dosimetry
■ Kalibrierung 2 ■ Calibration
■ Gas- und Wasserinstallation 3-4■ Funktionsprüfungen an Türen, Toren und Zubehör
■ Gas and water building installation ■ Durability tests of doors, industrial doors and building hardware
■ Zertifizierung von Qualitätsmanagementsystemen 5 ■ Certification of quality management systems
■ Metalle 6-7 ■ Metals and metal constructions
■ Sicherheitsglas - Mineralischen Baustoffe 8-9 ■ Safety glazing - mineral building materials
■ Wärmeschutz - Organische Baustoffe - Analytische Chemie 10-12
■ Thermal protection - plastics, elastomers and similar products - Chemical analysis
■ Brandverhalten von Bauteilen / Bauarten und Baustoffen 13-14 ■ Testing of the reaction to fire behaviour of building products
■ Anerkennungen und Akkreditierungen 15-18 ■ Approvals and Accreditations
- 1 -
Strahlenschutz (Dez. 11)
Radiation protection (Dep. 11)
Radioaktivitätsmessungen
Gutachtertätigkeit im Freigabeverfahren
Sachverständigenstellen ■ Röntgenverordnung ■ Strahlenschutz- verordnung
Radioactivitymeasurements
Expert work for the procedure of clearance
Expert body according to „X-Ray Directive“ and „Radiation Protection Ordinance“
■ Emissions- und Immissionsüberwachung■ Prüfungen und Gutachten im Freigabeverfahren ■ Radioaktivitätsmessungen■ Gammaspektrometrie■ Alphaspektrometrie■ Radiochemische Sonderanalysen■ Radondosimetrie■ Aktive und passive Radondosimeter■ Radonkammer
■ Sachverständigenprüfung von Röntgenanlagen■ Sachverständigenprüfung von Bestrahlungsanlagen■ Prüfung zur Qualitätssicherung in der Therapie■ Dichtheitsprüfung radioaktiver Strahler■ Prüfung zur Auslegung des baulichen ■ Strahlenschutzes
■ Emission and immission■ monitoring of nuclear power facilities■ inspection and survey in release process■ gammaspectrometry■ alpha-spectrometry■ Radiochemical analyses of special nuclides■ Determination of radon with active and passive measurement methods■ Radon calibration chamber
■ Expertise of roentgenoscope■ Expertise of irradiation applicator■ Inspection of quality assurance in therapy■ Leak test of sealed radioactive sources■ Examination for interpretation of structural radiological protection
Dipl.-IngenieurDieter HeinenTel: (02 31) 45 02-539Fax: (02 31) 45 [email protected]
Dipl.-ChemikerDr. Axel RoxTel: (02 31) 45 02-550Fax: (02 31) 45 [email protected]
- 2 -
Personendosimetrie / Kalibrierung (Dez. 12/Dez. 13)
Personal dosimetry / Calibration (Dep. 12/Dep. 13)
Personendosimetrie
Gutachtertätigkeit im Freigabeverfahren
Personal dosimetry
Kalibrierung
Prüfung
Messtechnische Kontrollen
Calibration
Verification
Metrological controls
Personendosimetrie mit ■ Filmdosimetern ■ Festkörperdosimetern ■ Kernspurdosimetern für Photonen-, Neutronen- und Betastrahlung sowie Radon-Exposition
Ortsdosimetrie mit integrierenden Festkörperdosimetern
Kalibrierbestrahlungen von Dosimetersonden
Personal dosimetry with ■ film dosemeters■ solid state dosemeters■ track etch dosemeters for photon-, neutron- and beta radiation as well as radon exposure
Environmental dosimetry with integrating solid state dosemeters
Calibration irradiation of desemeters
■ Mess- und Prüfgeräte für elektrische Größen (DKD-Labor)■ Temperatur und Feuchte ■ Prüfmaschinen■ Baustoff- und Werkstoffprüfmaschinen (DKD-Labor)■ Kraftmessgeräte (DKD-Labor)■ Spannpressen■ Manometer und Sondergeräte ■ Druckkraft■ Längenmessgeräte■ Härtevergleichsplatten (DKD-Labor)■ Eindringkörper (DKD-Labor)
Messtechnische Kontrollen von Applanations-tonometern nach der Medizinprodukte-Betreiberverordnung
■ Measurement and testing machines for electrical parameters (DKD calibration laboratory)■ temperature and humidity■ Testing machines ■ Building material and material testing machines (DKD calibration laboratory)■ Force proving instruments (DKD calibration laboratory) auxiliary devices for application of force■ Manometer and special machines■ Compressive force■ length measurement devices■ Hardness reference blocks (DKD calibration laboratory)■ indenters (DKD calibration laboratory)
Measurement- technology controls of ophthalmic instruments according to MPBtreibV (Guideline 93/42/EWG)
Dipl.-PhysikerDr. Frank BuschTel: (02 31) 45 02-517Fax: (02 31) 45 [email protected]
Dipl.-PhysikerDr. Michael JordanTel: (02 31) 45 02-552Fax: (02 31) 45 [email protected]
Dipl.-PhysikerDr.-Ing. Anatol WorchTel: (02 31) 45 02-341Fax: (02 31) 45 [email protected]
- 3 -
DVGW-Prüfungen • Türenprüfungen (Dez. 14)
DVGW-Tests • Durability tests of doors (Dep. 14)
Gas- undWasserinstallation
Gas and water building installation
Prüfung, Überwachung und Begutachtung von Türen, Toren und Zubehör
Testing, surveillance and assessment of doors, industrial doors and building hardware
■ Prüfung von Bauteilen der Gas-, Wasser- und Heizungsinstallation■ Dauerfunktionsprüfung an Sanitärarmaturen ■ Prüfung des Geräuschverhaltens von Armaturen und Geräten der Wasserinstallation ■ Innendruckprüfungen
■ Tests of components of water and heating installation■ Sanitary taps ■ Laboratory tests on noise emission from appliances and equipment used in water supply installations■ Internal pressure tests
Brandverhalten, Rauchdichtigkeit und Dauerfunktion von Türen, Toren und Abschlüssen ■ Schlagregen- und Windlastprüfungen an Türen und Fenstern ■ Prüfung einbruchhemmender Türen und Abschlüsse
Leakage and durability tests of smoke control doors, fire doors and shutters ■ Testing of Watertightness and Resistance to wind load of doors and windows ■ Burglar resistance tests of doors and shutters
■ Prüfung und Überwachung von Zubehör für Türen und Tore
■ Testing and Surveillance of Building-Hardware
■ Gutachten für bauaufsichtliche Zustimmungen im Einzelfall ■ Fremdüberwachung von Rauch- und Feuerschutz- abschlüssen
■ Surveillance of smoke control doors, fire doors and shutters
Dipl.-IngenieurDietwald JansenTel: (02 31) 45 02-497Fax: (02 31) 45 [email protected]
Dipl.-IngenieurRainer GröningTel: (02 31) 45 02-494Fax: (02 31) 45 [email protected]
Dipl.-IngenieurHermann JansenTel: (02 31) 45 02-485Fax: (02 31) 45 [email protected]
Dipl.-IngenieurThomas HentreyTel: (02 31) 45 02-220Fax: (02 31) 45 [email protected]
- 4 -
Lagertechnik und Metallroste (Dez. 14)
Surveillance and Certification of storage systems (Dep. 14)
Prüfung, Überwachung und Zertifizierung von Lagertechnik und Metallrosten
Testing, Surveillance and Certification of storage systems and Metal gratings
Prüfung und Güteüberwachung von ■ Lager- und Betriebseinrichtungen (Regale, Stahlschränke, Werkbänke etc.) ■ Gitterroste und Blechprofilroste als Bodenbelag und Treppenstufe
Erteilung von GS-Zeichen für Lager und Betriebseinrichtungen
■ Testing and Quality Control of workshop- and storage equipment (static and mobile racking and shelving)■ Testing and quality control of gratings and sheet metal gratings as floor coverings■ GS-Certification of workshop- and storage equipment
Dipl.-PhysikerDetlef KarrenbergTel: (02 31) 45 02-480Fax: (02 31) 45 [email protected]
- 5 -
Zertifizierung von Qualitätsmanagement-Systemen (Dez. 15)
Certification of quality management systems (Dep. 15)
Zertifizierung von Qualitätsmanagement-systemen
Certification of quality management systems
Zertifizierung und Überwachung von QM-Systemen nach
■ DIN EN ISO 9001:2000 ■ 93/42/EWG Medizinproduktenrichtlinie (Hörgeräte, Audiometer)
Durchführung von Betriebs-Checks bei kleinen und mittelständischen Unternehmen
Certification and monitoring of quality management system
■ DIN EN ISO 9001:2000 ■ 93/42/EWG Medical devices (hearing aids/audiometer)
Performance of process-checks in small and medium sized companies
Dipl.-IngenieurArtur OrlikowskiTel: (02 31) 45 02-324Fax: (02 31) 45 [email protected]
Dipl.-IngenieurHubertus Knopp-LadwigTel: (02 31) 45 02-471Fax: (02 31) 45 [email protected]
- 6 -
Mechanisch-technologische Prüfungen (Dez. 21)
Mechanic technological tests (Dep. 21)
Mechanisch-technologische Prüfungen
Mechanic technological tests
Metallographie
Metallography
Werkstoffverhalten unter mechanischer Beanspruchung
Material testing under mechanical stress
Prüfung, Überwachung und Zertifizierung von:■ Metallschornsteinen■ Abgasleitungen■ feuerverzinkten Stahlrohren■ emaillierten Bauteilen
Nachwachsende Brennstoffe
Schadensanalysen (Metalle, Korrosion)
External monitoring of■ metal chimneys■ flue pipes■ galvanized steel pipes ■ enameled parts
Renewable resources
Examination in cases of damage (metal, corrosion)
Dipl.-IngenieurinSusanne HönigTel: (02 31) 45 02-459Fax: (02 31) 45 [email protected]
Dipl.-ChemikerDr. Gunther PajonkTel: (02 31) 45 02-557Fax: (02 31) 45 [email protected]
- 7 -
Metallische Bauprodukte (Dez. 21)
metals and metal constuctions (Dep. 21)
Metallische Bauprodukte
Testing of metals and metal constructions
Zulassungsprüfungen von Bauprodukten für den Stahlbeton- und Metallbau
Abnahmeprüfungen von Maschinenbauelementen
Prüfung, Überwachung und Zertifizierung von Bauprodukten: ■ Betonstahl ■ Spannstahl ■ Metallbausowie von Produkten für die ■ Trinkwasserversorgung ■ Abwasserentsorgung ■ Gebäude- und Grundstücksentwässerung
DVGW-Überwachung an Rohren und Formstücken für die Trinkwasser- und Gasversorgung
Schweißeignungsnachweise nach DIN 4099
Approval tests of building products for reinforced steel and metal construction
Approval tests of elements in mechanical engineering
Testing, surveillance and certification of building products ■ Reinforcing steel ■ Prestressing steel ■ Metal construction
Ductile iron tubes and fittings for potable water and sewage application
Welding of cencrete steel (DIN 4099)
Dipl.-IngenieurinDr. Helena EichenmüllerTel: (02 31) 45 02-454Fax: (02 31) 45 [email protected]
- 8 -
Sicherheitsglas (Dez. 22)
Safety glazing (Dep. 22)
Sicherheitsglas
Safety glazing
■ Kraftfahrzeugverglasung■ Bauglas■ Glasähnliche Stoffe■ Einbruchhemmendes Glas■ Mechanische Festigkeit■ Bruchverhalten■ Optische Eigenschaften■ Produktionsüberwachung einschl.■ Fertigungsüberwachung von bauartgenehmigten Sicherheitsverglasungswerkstoffen (ECE-R 43)
■ Motor vehicle glazing■ architectural glass■ glass-like materials■ penetration-resistant glass■ impact-resistant bulbs■ mechanical robustness■ breaking behaviour■ optical qualities■ production surveillance including production surveillance of type-approved safety glazing materials (ECE-R 43)
Dipl.-PhysikerDr. Matthias DümmlerTel: (02 31) 45 02-415Fax: (02 31) 45 [email protected]
Dipl.-IngenieurStephan BillerTel: (02 31) 45 02-602Fax: (02 31) 45 [email protected]
- 9 -
Mineralische Baustoffe (Dez. 22)
Mineral building products (Dep. 22)
Prüfung von mineralischen Baustoffen und weiteren Bauprodukten
Testing of mineral building materials and other building products
■ Befestigungen■ Baustellen- /Werksüberwachungen■ Zertifizierung■ Wand, Boden- und Deckenbaustoffe■ Rohre■ Bauchemische Untersuchungen■ Betonzusatzmittel■ Zuschläge■ Natursteine■ Bindemittel■ Steinkohlenflugasche■ Straßenbaustoffe
■ Fixings■ building site monitoring■ factory production control■ certification■ Chemical investigations■ concrete admixtures, aggregates, natural stones■ Building materials for walls, floors and ceilings, testing of pipes■ Binder■ hard coal fly ash■ materials for road construction
Dipl.-MineraloginDr. Patricia WolfsdorffTel: (02 31) 45 02-241Fax: (02 31) 45 [email protected]
Dipl.-IngenieurHans FörsterTel: (02 31) 45 02-250Fax: (02 31) 45 [email protected]
- 10 -
Wärmeschutz (Dez. 23)
Thermal- and moisture protection (Dep. 23)
Wärme und Feuchtigkeitsschutz
Thermal- and moisture protection
Prüfung, Überwachung und Zertifizierung aller Arten von Wärme- und Trittschalldämmstoffen nach nationalen und europäischen Normen, Zulassungen und Richtlinien
Wärme- und feuchtetechnische Prüfungen ■ Keymark-System ■ DIN CERTCO ■ VDI-Gütesicherung ■ GSH ■ IVH
Feuchte- und wärmetechische Simulations-rechnungen
Auditierung von Prüfstellen im Rahmen von Anerkennungsverfahren
Testing, surveillance and certification of all kinds of thermal insulation products according to national and European standards, technical approvals and other directives
Acknowledged as testing laboratory for the European voluntary surveillance system ■ KEYMARK ■ DIN-CERTCO ■ GSH ■ IVH
Numerical simulation of coupled heat- and moisture transport
Auditing of test laboratories, which apply for recognition
Dipl.-PhysikerKarlheinz FennigTel: (02 31) 45 02-420Fax: (02 31) 45 [email protected]
- 11 -
Organische Baustoffe (Dez. 23)
Plastics, elastomers and similar products (Dep. 23)
Prüfung von Kunststoffen und Elastomeren sowie verwandten Produkten
Prüfung von chemisch-technischen Produkten
Testing of plastics, elastomers and similar produtcs
Testing of chemical-technical products
■ Thermoplaste■ Duroplaste und verstärkte Kunststoffe■ Verbundwerkstoffe■ Folien und Dichtungsbahnen■ Sperrschichtmaterialien■ Schaumstoffe■ Dichtungsmittel für Abwasserleitungen■ Elastomere und Elastomerlager■ Ortschäume■ Dachdichtungssysteme■ Fugenbänder■ Abgasleitungen, Schläuche und Rohre■ Fußbodenbeläge und Klebstoffe
■ Bituminöse Stoffe■ kunstharzgebundene Putze■ Öl- und Chemiekalienbinder■ Anerkennung nach RAP Stra■ Beschichtungen■ Fugendichtstoffe
■ Plastics■ composite materials■ foils, sheet■ waterproof sheetings■ barrier materials■ cellular plastics■ Elastomers■ seals for pipe joints in drains and sewers■ elastomeric bearings■ In-situ cellular plastics■ water proof sheetings and coatings for roofs■ elastomeric preformed gaskets for sealing of joints in concrete■ exhaust pipe lines■ Pipes■ Hoses■ floor coverings■ adhesives
■ Bituminous materials■ resin-bond plasters■ Oil absorbing products■ Acknowledgment according to RAP Stra■ Coatings■ joint sealing materials
Dipl.-ChemikerinDr. Joanna KraschTel: (02 31) 45 02-226Fax: (02 31) 45 [email protected]
Dipl.-IngenieurJürgen JessenTel: (02 31) 45 02-276Fax: (02 31) 45 [email protected]
- 12 -
Analytische Chemie (Dez. 23)
Mineral building products (Dep. 23)
Analytische Chemie
Chemical analysis
Nasschemische und instrumentelle Analytik ■ Analysen mit AAS, ICP-MS und ICP-OES ■ Bestimmung der Schwermetallabgabe von metallischen Werkstoffen an Trinkwasser ■ Prüfungen gemäß NSF 61 ■ Emmisionsspektralanalyse von Metallen ■ Analyse von Feststoffen mit der Röntgenfluoreszenz ■ Allgemeine Korrosionsschutzprüfungen ■ Sauerstoffdichtigkeit von Kunststoffen und Fußbodenheizungsrohren ■ Prüfung von Systemabgasanlagen
Analysis of inorganic specimen by means of wet-chemical methods, optical emission and atomic absorption spectroscopy ■ Phase analytic of asbestos specimen ■ Inorganic drinking water analysis ■ Analysis of solids ■ General corrosion tests ■ Detection of the oxygen permeability of plastic pipes for floor heating ■ Test of metal line system chimneys
Dipl.-IngenieurKarl-Heinz DemantTel: (02 31) 45 02-367Fax: (02 31) 45 [email protected]
- 13 -
Brandschutz von Bauteilen (Dez. 24)
Fire resistance tests of building components (Dep. 24)
Prüfung des Brandverhaltens von Bauteilen / Bauarten
Fire resistance tests of building parts and components
■ Wände, Decken, Doppel- und Hohlraumböden■ Verglasungen, Kabelabschottungen■ Funktionserhalt von Kabeln■ Abschlüsse für Förderanlagen, Fahrschachttüren, Feuerungseinrichtungen, Bauteilausschnitte■ Dämmstoffe■ Rauch und Wärmeabzüge
■ Brandverhalten von haustechnischen Anlagen - Lüftungsleitungen - Brandschutzklappen - Installationsschächte und -kanäle - Rohrdurchführungen - Schornsteine
Sonderkonstruktionen, an die Forderungen bezüglich der Feuerwiderstandsdauer gestellt werden
■ Walls, ceilings, floors, roofs, glazings, penetration seals■ Circuit integrity maintenance of electric cable systems■ Fire doors, fire gates, shelter-barriers, closures for conveyors and trackbound transportation systems, lift landing doors■ Thermal insulating materials■ Natural smoke and heat exhaust ventilators
■ Fire behaviour of building materials and building components - ventilation ducts - service shafts and ducts - pipe encasements - pipe bushings - barriers across inspection openings - chimneys
Special building components with requirements to fire resistance
Dipl.-PhysikerJürgen PenningsTel: (0 29 43) 897-12Fax: (0 29 43) [email protected]
Dipl.-IngenieurFrank DiekmannTel: (0 29 43) 897-23Fax: (0 29 43) [email protected]
- 14 -
Brandschutz von Baustoffen (Dez. 25)
Testing of the reaction to fire behaviour of building products (Dep. 25)
Prüfung des Brandverhaltens von Baustoffen nach deutschen, europäischen und internationalen Normen
Sonderprüfungen
Testing of the reaction to fire behaviour of building products according to ger-man, European and interna-tional standards
Special tests
Alle Bauprodukte, insbesondere Prüfungen nach ■ DIN 4102-1, -14, -15, -16 ■ DIN EN ISO 1716, ■ DIN EN ISO 1182, ■ DIN EN ISO 13823, ■ DIN EN ISO 9239-1, ■ DIN EN ISO 11925-2
Klassifizierung des Brandverhaltens nach DIN EN 13501-1
Brandversuche mit natürlichen Brandszenarien bzw. nach zu vereinbarenden ad-hoc-Verfahren an verschiedenen Baustoff- / Bauteilkonfigurationen
All building products.Mainly tests according to DIN 4102-1, -14, -15, -16, and according to DIN EN ISO 1716, DIN EN ISO 1182, DIN EN 13823, DIN EN ISO 9239-1, DIN EN ISO 11925-2.
Classification according to DIN EN 13501-1
Fire tests with natural fire scenarios and individually planned ad-hoc tests on different building products.
Dipl.-IngenieurHendrik RademacherTel: (0 29 43) 897-11Fax: (0 29 43) [email protected]
Dipl.-IngenieurSven KühnenTel: (0 29 43) 897-18Fax: (0 29 43) [email protected]
Das MPA NRW besitzt für alle angebotenen Dienstleistungen die erforderlichen Anerkennungen und Akkreditierungen:
Akkreditierungs-/ Anerkenn.-Stelle akkreditierte / anerkannte Stelle Registriernummer
Bauaufsichtliche Prüf-, Überwachungs- und Zertifizierungsstellen
DIBt Prüf-, Überwachungs- und Zertifizierungsstelle nach dem Bauproduktengesetz (Dezernate 11, 12, 13, 21, 22 und 23)
NB 0432
DIBt Prüf-, Überwachungs- und Zertifizierungsstelle nach Landesbauordnung (Dezernate 11, 12, 13, 21, 22 und 23)
NRW 02
Laboratorien
AMECA (USA) Prüflabor für KfZ-Verglasung (Dezernat 22) keine
AMECA (Taiwan) Prüflabor für KfZ-Verglasung (Dezernat 22) DE03-06-0
DAP Prüflabor des Dezernates 11 „Gas- und Wasserinstallationen, Sanitärarmaturen, Feuer- und Rauchschutzabschlüsse“
DAP-PL-2600.11
DAP Prüflabor des Dezernates 21, „Mechanisch-technologische Prüfungen, Metallographie / Schadensanalysen, metallische Bauprodukte, Zertifizierung von Qualitätsmanagementsystemen“
DAP-PL-2600.21
DAP Prüflabor des Dezernates 22 „Sicherheitsglas, mineralische Baustoffe, Bauchemie“
DAP-PL-2600.22
DAP Prüflabor des Dezernates 23 „Wärmeschutz, organische Baustoffe, analytische Chemie“
DAP-PL-2600.23
DAP Prüflabor des Dezernates 32 Strahlenschutz, Radioaktivitätsmessungen“ DAP-PL-2600.32
DAP Prüflabor des Dezernates 33 „Personendosis-Messstelle“ DAP-PL-2600.33
DAP Prüflabor des Dezernates 34 „Prüfung und Kalibrierung von Prüfmaschinen, Härte-Normale“
DAP-PL-2600.34
DKD Kalibrierlabor für elektrische Gleichstrom- und NF-Größen, Kraft, Härte, Werkstoffprüfmaschinen (Dezernat 34)
DKD-K-06301
EBA Prüfstelle für eisenbahntypische Prüfungen an Bauteilen von Eisenbahnfahrzeugen (Dezernat 22)
EBA -17/04/05 -
FORS (Australien) Registriertes Prüflabor im Rahmen des „Road Vehicle Certification System (RVCS)“
T5748
KBA Prüflabor für Sicherheitsglas (Dezernat 22) KBA-P 00017-96
Ministerium für Bauen und Verkehr NRW
Prüfstelle für Baustoffe und Baustoffgemische im Straßenbau gemäß RAP Stra Ausgabe 2004 (Dezernat 22)
keine
VDI-Gesellschaft Energietechnik GET
Federführendes Prüfinstitut nach VDI 2055 keine
ZLS Prüflabor für Maschinen (Dezernat 11) ZLS-P-508/04
ZLS Prüflabor für technische Arbeitsmittel im Geltungsbereich des GSG (Dezernat 11)
ZLS-P-433/03
ZLS Prüflabor für Brandverhalten von Bauteilen (Dezernat 12) ZLS-P-650/06
Zertifizierungsstellen für Produkte
DAP Zertifizierungsstelle für Produkte nach DIN EN 45011 (Dezernate 11, 21 und 22)
DAP-ZE-4063.00
ZLS Zertifizierungsstelle für Maschinen (Dezernat 21) ZLS-ZE-424/04
ZLS Zertifizierungsstelle für technische Arbeitsmittel im Geltungsbereich des GPSG (Dezernat 11)
ZLS-ZE-366/03
- 15 -
Akkreditierungs-/ Anerkenn.-Stelle akkreditierte / anerkannte Stelle Registriernummer
Zertifizierungsstellen für Qualitätsmanagementsysteme
TGA Zertifizierungsstelle für Qualitätsmanagementsysteme nach DIN EN ISO / ICE 17021 (Dezernat 21)
TGA-ZM-01-91-00
ZLS Zertifizierungsstelle für Qualitätssicherungssysteme im Geltungsbereich des MPG und der EG-Richtlinie 93/42/EWG (Medizinproduktenrichtlinie) für Konformitätsbewertungsverfahren nach Anhang II, V und VI der Richtlinie (Dezernat 21)
ZLS-ZQ-353/08
Laboratorien für DIN CERTCO-Prüfungen
DIN CERTCO Prüflabor des Dezernates 11 „Gas- und Wasserinstallationen, Sanitärarmaturen, Feuer- und Rauchschutzabschlüsse“
PL 060
DIN CERTCO Prüflabor Mechanisch-technologische Prüfungen, Metallographie / Schadensanalyse, metallische Bauprodukte“ des Dezernates 21
PL 174
DIN CERTCO Prüflabor Gas- und Wasserinstallation, Sanitärarmaturen der Dezernate 11 und 21
PL 060
DIN CERTCO Prüflabor des Dezernates 13 „Brandverhalten von Baustoffen“ PL 146
DIN CERTCO Prüflabor Kunststoffe und Elastomere des Dezernates 23 PL 062
DIN CERTCO Prüflabor Wärmeschutz, organische Baustoffe, analytische Chemie des Dezernates 23
PL 155
Laboratorien für DVGW-Prüfungen
DVGW Prüflabor Gas / Wasser des Dezernates 11 „Gas- und Wasser-installationen, Sanitärarmaturen, Feuer- und Rauchschutzabschlüsse
LV-AU 8015
DVGW Prüflabor Gas / Wasser des Dezernates 21, „ Mechanisch-technologische Prüfungen, Metallographie / Schadensanalysen, metallische Bauprodukte, Zertifizierung von Qualitätsmanage-mentsystemen“
LV-BL 8003
DVGW Prüflaboratorium Wasser des Dezernates 21, „ Mechanisch-technologische Prüfungen, Metallographie / Schadensanalysen, metallische Bauprodukte, Zertifizierung von Qualitätsmanagement-systemen“
LW-AS 8013
DVGW Prüflabor Gas / Wasser des Dezernates 23 „Wärmeschutz, organische Baustoffe, analytische Chemie“
LV-BL 8004
Verschiedene Anerkennungen
Landesanstalt für Arbeitsschutz des Landes NRW
Sachverständigenstelle nach Röntgenverordnung (RöV) keine
Landesanstalt für Arbeitsschutz des Landes NRW
Bestimmung von Mitarbeitern des MPA NRW als Sachverständige für Dichtheitsprüfungen gemäß § 66 Abs. 1 Strahlenschutzverordnung (StrlSchV)
keine
Bayerisches Landesamt für Maß und Gewicht
Mitteilung der Durchführung messtechnischer Kontrollen an Medizinprodukten zur Bestimmung des Augeninnendrucks (Augentonometer)
keine
Landesanstalt für Arbeitsschutz des Landes NRW
Bestimmung als Messstelle für Radon-222 gemäß § 95 Abs. 10 Strahlenschutzverordnung (StrlSchV)
keine
- 16 -
The MPA NRW possesses all the necessary licenses and accreditations for rendering the services offered.
Accreditation / Approval Bodies Accredited / Approved Bodies Identification
Number
Test Laboratories, Inspection and Certification Bodies for Construction Products in the Regulatory Area
DIBt Test Laboratory, Inspection Body, Product Certification Body according to the Construction Products Directive (Dept. 11, 12, 13, 21, 22 and 23)
NB 0432
DIBt Test Laboratory, Inspection Body, Product Certification Body according to Regional Building Law (Dept. 11, 12, 13, 21, 22 and 23)
NRW 02
Test Laboratories
AMECA (USA) Test Laboratory for Vehicle Glazing (Dept. 22) none
AMECA (Taiwan) Test Laboratory for Vehicle Glazing (Dept. 22) DE03-06-0
DAP Test Laboratory for Gas and Water Building Installation, Sanitary Taps, Fire and Smoke Control Doors (Dept. 11)
DAP-PL-2600.11
DAP Test Laboratory for Mechanical-Technological Tests, Metallography / Damage Analyses, Metal Construction Products, Certification of Quality Management Systems (Dept. 21)
DAP-PL-2600.21
DAP Test Laboratory for Safety Glazing, Mineral Production Products, Chemical Analyses of Construction Products (Dept. 22)“
DAP-PL-2600.22
DAP Test Laboratory for Thermal Insulation Products, Organic Construction Products, Chemical Analysis (Dept. 23)
DAP-PL-2600.23
DAP Test Laboratory for Radiation Protection, Radioactivity Measurements (Dept. 32)
DAP-PL-2600.32
DAP Test Laboratory for Personal Dosimetry (Dept. 33) DAP-PL-2600.33
DAP Test Laboratory for Testing and Calibration of Testing Machines, Hardness Reference Blocks and Indenters (Dept. 34)
DAP-PL-2600.34
DKD Calibration Laboratory for Electrical Parameters, Force Proving Instruments, Hardness Reference Blocks and Indenters, Testing Machines (Dept. 34)
DKD-K-06301
EBA Test Laboratory for Structural Components of Railway Vehicles (Dept. 22) EBA -17/04/05 -
FORS (Australien) Registered Test Laboratory for the „Road Vehicle Certification System (RVCS)“ (Dept. 22)
T5748
KBA Test Laboratory for Safety Glazing (Dept. 22) KBA-P 00017-96
Ministerium für Bauen und Verkehr NRW
Test Laboratory for Building Materials and Compound Building Materials according to RAP Stra (edition 2004) (Dept. 22)
none
VDI-Gesellschaft Energietechnik GET
Test Laboratory in Charge according to VDI 2055 none
ZLS Test Laboratory for Machinery according to the Machinery Directive (Dept. 21)
ZLS-P-508/04
ZLS Test Laboratory for Tools and Supplies for Work according to GPGS (Dept. 11)
ZLS-P-433/03
ZLS Test Laboratory for Fire Resistance Tests (Dept. 12) ZLS-P-650/06
Product Certification Bodies
DAP Product Certification Body according to EN 45011 (Dept.s 11, 21, 22 and 23)
DAP-ZE-4063.00
ZLS Product Certification Body for Machinery according to the Machinery Directive (Dept. 21)
ZLS-ZE-424/04
ZLS Product Certificatin Body for Tools and Supplies for Work according to GPGS (Dept. 11)
ZLS-ZE-366/03
- 17 -
Accreditation / Approval Bodies Accredited / Approved Bodies Identification
Number
Certification Body for Quality Management Systems
TGA Certification Body for Quality Management Systems according to ISO / IEC 17021 (Dept. 21)
TGA-ZM-01-91-00
ZLS Certification Body for Quality Systems according to the Medical Devices Directive (Annexes II, V and VI) (Dept. 21)
ZLS-ZQ-353/08
Laboratories acting as subcontractors to DIN CERTCO
DIN CERTCO Test Laboratory for Test Laboratory for Gas and Water Building Installation, Sanitary Taps, Fire and Smoke Control Doors (Dept. 11)“
PL 060
DIN CERTCO Test Laboratory for Mechanical-Technological Tests, Metallography / Damage Analyses and Metal Construction Products (Dept. 21)
PL 174
DIN CERTCO Test Laboratory for Gas and Water Building Installation, Sanitary Taps (Dept. 11 and 21)
PL 060
DIN CERTCO Test Laboratory for Fire Resistance Tests (Dept. 12) PL 146
DIN CERTCO Test Laboratory for Plastics and Elastomers (Dept. 23) PL 062
DIN CERTCO Test Laboratory for Thermal Insulation Products, Organic Building Materials and Chemical Analysis (Dept. 23)
PL 155
Laboratories acting as subcontractors to DVGW-Prüfungen
DVGW Test Laboratory for Gas and Water Building Installation, Sanitary Taps, Fire and Smoke Control Doors (Dept. 11)
LV-AU 8015
DVGW Test Laboratory for Mechanical-Technological Tests, Metallography / Damage Analyses and Metal Construction Products (Dept. 21)
LV-BL 8003
DVGW Test Laboratory for Mechanical-Technological Tests, Metallography / Damage Analyses and Metal Construction Products (Dept. 21)
LW-AS 8013
DVGW Test Laboratory for Thermal Insulation Products, Organic Construction Products and Chemical Analysis (Dept. 23)
LV-BL 8004
Various Approvals
Landesanstalt für Arbeitsschutz des Landes NRW
Authorized Expert Body according to X-Ray Directive and „Radiation Protection Ordinance“
none
Bayerisches Landesamt für Maß und Gewicht
Board of Control for Tonometers capable of measuring Intraocular Tension none
Landesanstalt für Arbeitsschutz des Landes NRW
Authorized Body for the Measuring of Radon-222 according to para. 95, clause 10 of the „Radiation Protection Ordinance“
none
- 18 - Stand: Mai 2010
MaterialprüfungsamtNordrhein-Westfalen
Marsbruchstraße 18644287 Dortmund
Telefon: +49 231/45 02 - 0Telefax: +49 231/45 85 49E-Mail: [email protected]: www.mpanrw.de
Außenstelle Erwitte
Auf den Thränen 259597 Erwitte
Telefon: +49 29 43/8 97 - 0Telefax: +49 29 43/8 97 - 89E-Mail: [email protected]: www.mpanrw.de
Viele Wege führen zum ...