XV EUROPEAN CONFERENCE MILANO 7 th -8 th JUNE 2013 CSG Latest Technology in Refrigeration and Air Conditioning Under the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS Advantages of synthetic refrigeration oils for ammonia refrigeration systems Christian Puhl Wolfgang Bock FUCHS EUROPE Schmierstoffe GmbH Diego Curti FUCHS LLUBRIFICANTI S.p.A.
25
Embed
Diego Curti - Fuchs Lubrificanti - VANTAGGI DEI LUBRIFICANTI SINTETICI NEI SISTEMI DI REFRIGERAZIONE OPERANTI CON AMMONIACA
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Advantages of synthetic
refrigeration oils for ammonia
refrigeration systems
Christian Puhl
Wolfgang Bock
FUCHS EUROPE Schmierstoffe GmbH
Diego Curti
FUCHS LLUBRIFICANTI S.p.A.
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
• Ammonia (NH3) as a refrigerant
• Compressor oils for ammonia systems
• Requirements for compressor oils for ammonia systems
• Applications of synthetic oils for ammonia systems
• Conclusion
Content
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Ammonia as refrigerant
Refrigerant Ammonia:
•Excellent thermo dynamic
characteristics: High COP
(Coefficient of Performance)
•Low energy costs
•Low price of the refrigerant
•High discharge temperature: two
stage compressor (piston), large oil
coolers (screw)
•Toxic and flammable - special safety
regulations (e.g. secondary loop)
BeverageFood Industry
ChemicalIndustry
Ships
Airconditioning
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Lubricants for NH3 systems
The refrigeration oil which is notmiscible with NH3, is trasportedback to the compressor or is drainedoff at the evaporator
Lubricants according to DIN 51503,Group KAA (not miscible)
Conventional ammonia refrigeration system (high refrigerating capacity): Flooded Evaporation
In addition: polyalkylene glycols (PAG)Group KAB = miscible with NH3
Attention•Hightly hygroscopic: can cause problems in the lubricating gap especcially in combination with aluminium components
•Danger of wear problems due to high volumes of dissolved / evaporating NH
3
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Open reciprocating pistonCompressors with oil pump /Centrifugal lubrication
LubricantsISO VG 32 - 68
Open screw compressorsOil-injected
LubricantsISO VG 46 - 68
Main viscosity grade for NH3
ISO VG 68
Viscosity grade for NH3 lubricants
Photo: GEA GRASSO
Photo: BOCK
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Lubricants for ammonia
CH3
CH2
CH2
CH2
CH2
CH2
CH2
CH3
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
DIN 51503 – Group KAA:Not miscible with NH3
( )
Mineral Oils
Hydro-treated Mineral Oils
Alkylbenzene Oils
Polyalfaolefins (PAO)
Synthetic Hydrocarbons
Polyalkilene glycols (PAG) DIN 51503 – Group KAB:Miscible with NH3
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Lubricants for ammonia:
Mineral Oils and Hydro-treated Mineral Oils
Mineral Oils (naphthenic)Chemical Structure:
Mainly naphthenic hydrocarbons (cycloalkanes)
Refining process:
Conventional solvent extraction and dewaxing (removal of long-chain paraffins)
Hydro-treated mineral oils (HC/Hydrocrack oils)Chemical Structure:
Iso-paraffinic hydrocarbons
Refining process:
Hydrocracking (saturation, removal of sulfur, denitration.) and isodewaxing(linear hydrocarbons � branched hydrocarbons)
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Lubricants for ammonia:
Synthetic base oils
Synthetic base oils:
- Are produced by chemical synthesis
- Have a more homogenous composition than mineral oils
- Do not contain impurities based on sulfur or nitrogen
Alkylbenzenes
Polyalphaolefins (PAO)
Synthetic hydrocarbons
CH3
CH3CH3CH3CH3
e.g.: PAO
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Lubricants for ammonia:
Requirements
� High thermal and chemical stability
�Good elastomer compatibility
�Good lubricity
�Excellent low-temperature flowability
�Low evaporating loss / low oil consumption
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Thermal and chemical stability for NH3
lubricants
…a thermally and chemically stable oildoesn‘t look like this…!
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
NH3 lubricants stability with
ammonia (DIN 51538)
Test:
The oil sample is exposed to a
continuous ammonia/air gas stream
bubbling through the fluid; test
temperature: 120°C, test duration: 7d.
Catalyst: steel coupon
Analyses after the test
Analyses after the test (total base number, appearance, …)
and of the steel coupons (appearance)
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Increase in total base numbers(mg KOH/g)
Naphthenic mineral oil 0,08
Synth. hydrocarbons 0,05
PAO 0,04
Conventional Mineral Oil (ISO VG 68) 0,20
Increase of “ total base number - TBN”
The higher the increase in total base number the higher is the
amount of critical reaction / aging products
NH3 lubricants stability with
ammonia (DIN 51538)
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Stability with ammonia (DIN 51538):
appearance of the oil
PAOMineral Oil Conventional
Mineral Oil(ISO VG 68)
No deposits
No discoloration
Deposits
Dark coloration
Synth Hydrocarbons
No deposits
Slight discoloration
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Stability with ammonia (DIN 51538):
appearance of the steel coupons
Mineral Oil
No discoloration Dark coloration
PAOSynth HydrocarbonsConventional
Mineral Oil 68)
Slight discoloration
Selected mineral oils show good results with regard to chemical stability / stability with ammonia. Synthetic oils show excellent results
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Compatibility of ammonia lubricants with
elastomer / sealing materials
Moderate swelling of the sealing material (5-20% volume increase) means that oil leakage
will not occur
Mineral oils, hydro-treated mineral oils and synthetic hydrocarbons are suitable
PAO: have to be checked with CR (clorobutadiene – caoutchouk)
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Sealing material:CR � Chloroprene
Neoprene®
Test conditions:Storage in oil,
7 days at 100°C
Compatibility of ammonia lubricants with
elastomer / sealing materials
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Solubility of ammonia in different lubricants
amount of NH3
in “non-soluble NH3
oils”
Mineral Oils: 2,9%
Synth Hydrocarbons:
2,2%
PAO: 2,1%
1,7 2,0 2,3 2,6 2,9Ammonia - solubility [%]
@ 20°C
Synthetic hydrocarbons and PAOLess ammonia dissolved in the oil � lower dilution � lower
viscosity reduction of the oil
� better stability of the lubricating film in the compressor
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Viscosity-Temperature-Behaviour - VI
68
7,4
62
9,1
68
10,5
-10
0
10
20
30
40
50
60
70
0 20 40 60 80 100 120
Kin
. V
isco
sity / m
m²/s
Temperature /°C
VI V at 40°C V at 100°C
Mineral Oils 58 68 7,4
Synth Hydrocarbons 124 62 9,1
PAO 142 68 10,5
Synthetic hydrocarbons and PAOhigh Viscosity Index VI� lower viscosity
reduction at higher temperature � better wear protection in the lubricating gap
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Low-temperature flowability – without
refrigerant
0
2000
4000
6000
8000
10000
12000
14000
16000
-35 -30 -25 -20 -15 -10 -5 0
kin.
Vis
cosity
[mm
²/s]
Temperature [°C]
PAO
SynthHydrocarbons
MIneral OilsHydrotreated
Mineral Oils
Synthetic hydrocarbons and PAOcompared to mineral oils / hydro-treated mineral oils, viscosity increases less at
low temperature
� better flowability at low temperature (in the evaporator)
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Low temperature flowability: Pourpoint
(DIN ISO 3016) - without refrigerant
Synthetic hydrocarbons and PAOSuitable for extremely low evaporating temperatures (< -45°C)
Plate heat exchangers (small diameters) can be used, and there is no risk
of channels being blocked by the oil
Pourpoint: lower temperature at which the oil is still flowable
MInerl Oils-39°C
Synth Hydrocarbures-48°C
PAO-57°C
MIneral OilsHydrotreated
ISO VG 68-42°C
-60 -55 -50 -45 -40
PourPoint - Temperature/°C
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS
Determination of the flowability of lubricants:
U-Tube-Test (DIN 51568) - without refrigerant
Mineral Oils
Alkylbenzenes
PAO
Synth Hydrocarbons
-50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0
Ve
loc
ity
/ (m
m/m
in)
T/°C
5
10
15
Synthetic hydrocarbons and PAOSignificantly better low temperature flowability than mineral oils and alkylbenzenes
Preferable for low evaporating temperatures
XV EUROPEAN CONFERENCE MILANO 7th-8th JUNE 2013 CSG
Latest Technology in Refrigeration and Air ConditioningUnder the Auspices of the PRESIDENCY OF THE COUNCIL OF MINISTERS