www.bonnema.co [email protected] 13.02.2013 Project 6 Pro: 301-0010 DE Kunde: GEA Heat Exchangers Herausforderung: Die Lagerung von langen Metall- rohren für die Herstellung von Wärmetauschern. Die Länge der Metall-Rohre betrug max. 8200mm. Diese sehr langen Rohre sind sehr schwer zu lagern und wurden auf dem Boden neben der Sägemaschine hin- gelegt. Dies war eine gefährliche Situation für die Mitarbeiter und für die Materialien. Sie brauchten ein System, dass auf der gleichen Fläche alle Rohr- Materialien sicher lagern konnten. Lösung: Wir haben unser "JUMBO"-Storage-System auf die Bedürfnisse der GEA angepasst. Die Länge des Speichersystems ist 8000mm mit der Unterstützung mehrerer Arme. Eine Schublade kann 1000 Kg spei- chern, es gibt 6 Schubladen und ein Dach, um zusätz- liche Materialien zu lagern. Jede Schublade ist 720 x 200 groß. Dies reicht aus, um das Material zu lagern. Das System wurde an der Wand installiert und die großen Rohr-Pakete können aufgrund der ausziehba- ren Schubladen ohne Probleme gelagert werden. ENG Customer: GEA Heat Exchangers Challenge: Storage of long metal tubes for the produc- tion of heat exchangers. Length of the metal-tubes are max 8200mm. These very long tubes are very hard to stock and were put on the ground next to the sawing machines. This was creating a dangerous situation for employees and the materials. They needed a system that could be installed on the same floor area and could stock all the tube material in a safe way. Solution: We redesigned our “JUMBO” storage systems to the needs of GEA. The length of the storage system is 8000mm with multiple support arms. 1000 Kg per draw- ers, 6 drawers + a roof-top to put extra material. Each drawers is 720 x 200, which is enough to store all the material. The system is installed against the wall and due to the pull-out drawers the large tube packages can be stocked save and without any problems.