Diaphragm Pumps MODELS 7006 7010 7011 7015 7006 DC FEATURES • Oil-less • Maintenance free • Smooth running • Low sound level • Long lifetime • Sealed tight • Large choice in material • Pressure or vacuum TYPICAL APPLICATIONS • Medical devices • Analysis • Air collector • Inhalators • Level surveillance • Autoclaves
20
Embed
Diaphragm Pumps - Gardner Denver Thomas - Home head Polyarylamide Diaphragm, valves, O-Ring EPDM Options PPS FPM, PTFE (FFPM) Model key: 7006 VD / 2,3 / E / DC Type Eccentric Diaphragm,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Diaphragm Pumps
MODELS
7006701070117015
7006 DC
FEATURES
• Oil-less• Maintenance free• Smooth running• Low sound level• Long lifetime• Sealed tight• Large choice in material• Pressure or vacuum
TYPICAL APPLICATIONS
• Medical devices• Analysis• Air collector• Inhalators• Level surveillance• Autoclaves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g15
798
Inch
esar
esh
own
in()
Flow Curves
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
OptionsPPSFPM, PTFE (FFPM)
Model key:
7006 VD / 2,3 / E / DC
Type Eccentric
Diaphragm, valves, O-Ring
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 60 °CWeight 0,66 kgPort direction D
Flow 7,5 l/min
Max. pressure 2,5 bar
Max. vacuum 85 %
Pneumatic DataDescription 7006VD/2,3/E/DCPart number 12 V DC 70060050
Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 2800 rpmCurrent consumption 2,3/1,15 AStarting current 5,4/2,7 APower consumption 28 WMotor insulation class BProtection class IP20
– Indicate inlet/outlet portswhen ordering
Standard port: – “D”
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum rel. [%] Pressure [bar]
7006 DC
�
Vacuum
Pressure
Motor type
Diaphragm Pump 7006 DC
2
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g15
803
Inch
esar
esh
own
in()
OptionsPPSFPM, PTFE (FFPM)
Flow Curves
Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,5 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 40 °CWeight 1,6 kgPort direction A
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Model key:
7006 VD / 2,3 / E / AC
Type Eccentric
Diaphragm, valves, O-Ring
Vacuum
PressureMotor type
Diaphragm Pump 7006 AC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
3
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g15
799
Inch
esar
esh
own
in()
Flow 9,0 l/min
Max. pressure 2,5 bar
Max. vacuum 85 %
Pneumatic DataDescription 7006VD/2,3/E/AC 7006VD/2,3/E/ACPart number 115 V/60 Hz 70060063
Electrical DataMotor type Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 HzNominal speed 3300 rpm 2800 rpmCurrent consumption 1,3 A 0,55 AStarting current 1,7 A 0,7 APower consumption 67 W 62 WMotor insulation class H FProtection class IP00 IP00Thermal switch 150 °C 150 °C
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 40 °C 15 to 40 °CWeight 1,1 kg 1,1 kgPort direction A A
* Part numbers change when restart is required with vacuum or pressure.
Flow Curves
– Indicate inlet/outlet portswhen ordering
Standard port: – “A”
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
7006 AC 115 V/60 Hz7006 AC 230 V/50 Hz
�
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Model key:
7006 VD / 2,3 / E / AC
Type Eccentric
Diaphragm, valves, O-Ring
Vacuum
PressureMotor type
Diaphragm Pump 7006 AC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFPM)
4
Electrical Data Wiring diagramMotor type BrushlessNominal voltage 12/24 V DCNominal speed 1000/3500 rpm(1)
Current consumption 3,9/2,1 AStarting current 10,4 APower consumption 28 WMotor insulation class EProtection class IP20
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g70
0602
00M
Z-0
Inch
esar
esh
own
in()
(1) For external speed control 1 to 10 V.(2) Flow at 3500 rpm.* Part numbers change when restart is required with vacuum or pressure.
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 60 °CWeight 0,66 kgPort direction D
Flow 10,0 l/min
Max. pressure 2,5 bar
Max. vacuum 85 %
Pneumatic DataDescription 7006VD/2,3/E/BLDCPart number 12 V DC 70060200
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Model key:
7006 VD / 2,3 / E / BLDC
Type Eccentric
Diaphragm, valves, O-Ring
Vacuum
PressureMotor type
Diaphragm Pump 7006 BLDC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFPM)
Function Colour ControlPin 1 V Supply Red 12 VDC (max. voltage range: 10..16 VDC)
24 VDC (max. voltage range: 10..28 VDC)Pin 2 Ground Black GroundPin 3 Speed Control Brown 0..12 VDC (0...3500 rpm)
0..24 VDC (0...3500 rpm)
5
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g15
763
Inch
esar
esh
own
in()
Flow 15,0 l/min
Max. pressure 2,5 bar
Max. vacuum 95 %
Pneumatic DataDescription 7006ZVDP/2,3/E/DC 7006ZVR/2,3/E/DCPart number 12 V DC 70060054 70060057
Electrical DataMotor type Permanent magnet Permanent magnetNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 4,0/2 A 3,7/2 AStarting current 8,7/4,7 A 8,7/4,7 APower consumption 48 W 48 WMotor insulation class B BProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 0,9 kg 0,9 kgPort direction CB DDConfiguration Parallel Series
Flow Curves
Model key:
7006ZVDP / 2,3 / E / DC
Diaphragm, valves, O-RingDouble head
Pressure Motor type
P=ParallelR=Series
– Indicate inlet/outlet portswhen ordering
Standard port: – “CB”
Type EccentricVacuum
15,0
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
7006 ZP DC7006 ZVR DC
�
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Diaphragm Pump 7006ZP/ZVR DC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFKM)
6
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g15
983
Inch
esar
esh
own
in()
* Part numbers change when restart is required with vacuum or pressure.Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.
Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,5 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 40 °CWeight 1,8 kgPort direction CBConfiguration Parallel
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Diaphragm Pump 7006ZP AC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFKM)
7
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Electrical DataMotor type Shaded pole Shaded poleNominal voltage 230 V/50 Hz 230 V/50 HzNominal speed 2500 rpm 2500 rpmCurrent consumption 0,7 A 0,7 AStarting current 1,1 A 1,1 APower consumption 180 W 180 WMotor insulation class H HProtection class IP00 IP00Thermal switch 180 °C 180 °C
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 40 °C 15 to 40 °CWeight 1,8 kg 1,8 kgPort direction CB CBConfiguration Parallel Series
Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.
Flow Curves
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
7006 ZP AC 230 V/50 Hz7006 ZVR AC
�
Model key:
7006ZVDP / 2,3 / E / AC
Diaphragm, valves, O-RingDouble head
Pressure Motor type
P=ParallelR=Series
Type EccentricVacuum
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Diaphragm Pump 7006ZP AC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFKM)
8
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g70
0602
01M
Z-0
Inch
esar
esh
own
in()
Electrical Data Wiring diagramMotor type Brushless BrushlessNominal voltage 12/24 V DC 12/24 V DCNominal speed 1000/3500 rpm(1) 1000/3500 rpm(1)
Current consumption 3,9/2,1 A 3,9/2,1 AStarting current 10,5 A 10,5 APower consumption 50 W 30 WMotor insulation class E EProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 0,9 kg 0,9 kgPort direction CB CBConfiguration Parallel Series
Flow 18,0 l/min
Max. pressure 2,5 bar
Max. vacuum 95 %
Pneumatic DataDescription 7006ZVDP/2,3/E/BLDC 7006ZVR/2,3/E/BLDCPart number 12 V DC 70060201 70060074
24 V DC 70060016 70060073Max. flow 18,0 l/min(2) 8,7 l/min(2)
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Diaphragm Pump 7006ZP/ZVR BLDC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
OptionsPPSFPM, PTFE (FFKM)
Function Colour ControlPin 1 V Supply Red 12 VDC
(max. voltage range: 10..16 VDC)24 VDC(max. voltage range: 10..28 VDC)
Pin 2 Ground Black Ground
Pin 3 SpeedControl
Brown 0..12 VDC (0...3500 rpm)0..24 VDC (0...3500 rpm)
9
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
296
Inch
esar
esh
own
in()
Flow 6,5 l/min
Max. pressure 2,2 bar
Max. vacuum 73 %
Pneumatic DataDescription 7010VD/2,2/N/DCPart number 12 V DC 70102502
Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 2800 rpmCurrent consumption 1,3/0,65 AStarting current 5,9/3,4 APower consumption 16 WMotor insulation class EProtection class IP00
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 60 °CWeight 0,6 kgPort direction D
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
294
Inch
esar
esh
own
in()
Electrical DataMotor type Shaded poleNominal voltage 230 V/50 HzNominal speed 2300 rpmCurrent consumption 0,54 AStarting current 0,62 APower consumption 52 WMotor insulation class EProtection class IP00Thermal switch no
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 40 °CWeight 0,95 kgPort direction A
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
301
Inch
esar
esh
own
in()
Flow 12,0 l/min
Max. pressure 2,0 bar
Max. vacuum 90 %
Pneumatic DataDescription 7010ZDP/2,2/NVN/DC 7010ZVR/2,2/NVN/DCPart number 12 V 70102167
Electrical DataMotor type Direct current Direct currentNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 1,7/0,9 A 0,9 AStarting current 4,5/3,5 A 3,5 APower consumption 20 W 20 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 0,75 kg 0,75 kgPort direction CB CBConfiguration Parallel Series
* Part numbers change when restart is required with vacuum or pressure.
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g34
00In
ches
are
show
nin
()
Electrical DataMotor type Shaded pole Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 Hz 230 V/50 HzNominal speed 2900 rpm 2300 rpm 2300 rpmCurrent consumption 0,9 A 0,5 A 0,38 AStarting current 1,1 A 0,6 A 0,6 APower consumption 67 W 60 W 60 WMotor insulation class B B BProtection class IP00 IP00 IP00Thermal switch 130 °C no no
General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °CMedia temperature 15 to 40 °C 15 to 40 °C 15 to 60 °CWeight 1,45 kg 1,45 kg 1,45 kgPort direction CB CB CBConfiguration Parallel Parallel Series
Flow 12,5 l/min
Max. pressure 2,3 bar
Max. vacuum 90 %
Pneumatic DataDescription 7010ZVDP/2,2/N/AC 7010ZVDP/2,2/NVN/AC 7010ZVR/2,2/NVN/ACPart number 115 V/60 Hz 70101813
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
298
Inch
esar
esh
own
in()
Flow 11,0 l/min
Max. pressure 2,3 bar
Max. vacuum 90 %
Pneumatic DataDescription 7011VDP/2,2/NVN/DC 7011VR/2,2/N/DCPart number 12 V DC 70110008 70110252
Electrical DataMotor type Direct current Direct currentNominal voltage 12/24 V DC 12/24 V DCNominal speed 3100 rpm 3100 rpmCurrent consumption 2,0/1,0 A 1,7 AStarting current 4,5/3,5 A 4,5 APower consumption 24 W 20 WMotor insulation class E EProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 0,85 kg 0,85 kgPort direction BB BBConfiguration Parallel Series
Flow Curves
* Part numbers change when restart is required with vacuum or pressure.
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
524
Inch
esar
esh
own
in()
Flow 24,0 l/min
Max. pressure 2,5 bar
Max. vacuum 98 %
Pneumatic DataDescription 7011ZVDP/2,2/VVN/DC 7011ZVR/2,2/VVN/DCPart number 12 V DC 70110520 70110037
Electrical DataMotor type Direct current Direct currentNominal voltage 12/24 V DC 12/24 V DCNominal speed 3200 rpm 3200 rpmCurrent consumption 3,8/1,9 A 3,8/1,9 AStarting current 11,7/8,2 A 11,7/8,2 APower consumption 46 W 46 WMotor insulation class E EProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 1,4 kg 1,4 kgPort direction CB CBConfiguration Parallel Series
Flow Curves
* Part numbers change when restart is required with vacuum or pressure.
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Dra
win
g13
316-
AIn
ches
are
show
nin
()
Electrical DataMotor type Direct current Direct currentNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 2,2/0,91 A 2,2/0,91 AStarting current 8,7/5,3 A 8,7/5,3 APower consumption 27 W 27 WMotor insulation class E EProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 1,1 kg 1,1 kgPort direction A A
Flow 14,0 l/min
Max. pressure 2,5 bar
Max. vacuum 80 %
Pneumatic DataDescription 7015VD/2,5/V/DC 7015VD/2,5/V/DCPart number 12 V DC 70152005
* Part numbers change when restart is required with vacuum or pressure.
Electrical DataMotor type Direct current Direct currentNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 6,0/3,0 A 6,0/3,0 AStarting current 18,0/9,0 A 18,0/9,0 APower consumption 72 W 72 WMotor insulation class E EProtection class IP20 IP20
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 60 °C 15 to 60 °CWeight 1,5 kg 1,5 kgPort direction CB CBConfiguration Parallel Series
Flow 25,0 l/min
Max. pressure 2,5 bar
Max. vacuum 95 %
Pneumatic DataDescription 7015ZVDP/2,5/V/DC 7015ZVR/2,5/V/DCPart number 12 V DC 70152009 70152015
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Electrical DataMotor type Capacitor CapacitorNominal voltage 230 V/50 Hz 230 V/50 HzNominal speed 2700 rpm 2700 rpmCurrent consumption 0,38 A 0,38 AStarting current 0,5 A 0,5 APower consumption 67 W 67 WMotor insulation class B BProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °CMedia temperature 15 to 40 °C 15 to 40 °CWeight 2,4 kg 2,4 kgPort direction CB CBConfiguration Parallel Series
Flow Curves
* Part numbers change when restart is required with vacuum or pressure.
– Indicate inlet/outlet portswhen ordering
Standard port: – “CB”
25
20
15
10
5
0
Flow [l/min]
7015ZP AC7015ZR AC
�
Diaphragm Pump 7015Z AC
90 80 70 60 50 40 30 20 10 0 0,5 1,0 1,5 2,0 2,5
Vacuum rel. [%] Pressure [bar]
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith.Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
OptionsPPSPTFE
18
Material choice for 7010 / 7011 / 7015 single and double head
Abbreviation Air Air Ozone Gases Alcohols Temperature limitsDiaphragm, valves, O-Rings inert gases aggressive Humid aggressive gas °CNBR N + 0 – – – -10/+90EPDM E + +/0 + +/0 +/0 -20/+90FKM/FPM V + + 0 +/0 –/0 +15/200FFKM/FFPM K + + + + + 200PTFE P + + + + + 250
Exact data can be obtained on request. We recommend tests with materials in case of critical or unclear applications.
+= good0 = critical, tests necessary–= not recommended
AAbbreviations:“P” = Parallel connections of several single heads“R” = Serial connections of several single heads“V” = Vacuum restart“D” = Pressure restart“Z” = Double head version (Note: type 7011 already has two heads, therefore type 7011Z is a 4 – headed pump)
AAdditional descriptions:The additives ”D” and ”V” are only relevant for the restart against pressure/vacuum.Every version can build pressure and vacuum restart against atmospheric pressure.