42C01SW2001 2.20151 ISAAC CANABRAVA DIAMOND CORPORATION DIAMOND DRILL HOLE LOG 010 PROJECT/PROPERTY: Whitefish CLAIM: ACC option HOLE: WF-1-98 ANGLE: -500 AZIMUTH: 3100 CO-ORDINATES: 5328825N 697040E CORE SIZE: NQ DRILLED BY: Bradley Bros. DATE: Oct. 14/98 LENGTH: 209.0 m ELEV: N/A LOGGED BY: S. Winter DATE STARTED: June 11/98 METRES From To 0-7.0 7.0 - 49.6 49.6 - 51.1 51.1 - 61.2 61.2 - 62.1 DATE FINISHED: June 14/98 DESCRIPTION CORE STORAGE: Wawa page l of 2 Casing Granite: massive, med. grained, equigranular: qtz 150 Xo, K-spar 650 7o: plagioclase 15 0 Xo: intergranular mafics - hornblende-biotite 50 Xo: foliated at 450 to CA: joint/slip surfaces coated with dark green chi.: core generally salmon-pink colour. 25.7 - 26.6 Granite pegmatite dyke. 33.75 - 40.0 Granodiorite: medium grained, grey, 150 Xo biotite with well developed foliation at 600 to CA., upper contact sharp at 450 to CA., lower contact sharp at 50 0 to CA. 40.0 - 40.3 Granite pegmatite dyke. Lamprophyre dyke: medium grained, dark grey-black colour, mica plus olivine in black grains to 1.5 mm. (Jason Rickard sample also): contacts 450 to CA. 47.9 - 49.6 Contact zone with thin stringers lamprophyre at 450 to CA. Granite: as above. 57.0 - 57.20 Two narrow lamprophyre dykes, as above at 80 0 - 900 to CA. LamoroDhvre dvke: as above, massive with share contacts at 450 to CA. 220 (W tt ™' *-
35
Embed
DIAMOND DRILL LOG HOLE WF-1-98€¦ · joint/slip surfaces coated with dark green chi.: core generally salmon-pink colour. 25.7 - 26.6 Granite pegmatite dyke. 33.75 - 40.0 Granodiorite:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
150Xo: intergranular mafics - hornblende-biotite 50Xo: foliated at 450 to CA:
joint/slip surfaces coated with dark green chi.: core generally salmon-pink colour.
25.7 - 26.6 Granite pegmatite dyke.
33.75 - 40.0 Granodiorite: medium grained, grey, 150Xo biotite with welldeveloped foliation at 600 to CA., upper contact sharp at 450 to CA., lower
contact sharp at 500 to CA.
40.0 - 40.3 Granite pegmatite dyke.
Lamprophyre dyke: medium grained, dark grey-black colour, mica plus olivine in black grains to 1.5 mm. (Jason Rickard sample also): contacts 450 to CA.
47.9 - 49.6 Contact zone with thin stringers lamprophyre at 450 to CA.
Granite: as above.
57.0 - 57.20 Two narrow lamprophyre dykes, as above at 800 - 900 to CA.
LamoroDhvre dvke: as above, massive with share contacts at 450 to CA.
220(W tt ™' *-
WF-1-98
METRES
page 2 of 2
DESCRIPTION
62.1 - 98.0
98.0 - 209.0
Granite: as above however foliation well developed at 450 to CA, scatteredpegmatites from few cm to 10's cm wide.87.95-88.15 Biotite, quartz, feldspar unit: contacts at 900 to CA. 6007o biotite,2007o plagioclase, 1007o qtz.Granodiorite: medium to coarse grained; qtz 1507o, K-spar 3507o, plagioclase3507o, mafics lS-20%; well foliated with biotite along foliation planes,450to CA., pegmatite dykes -10 cm to 50 cm wide; towards end of section iscoarse grained material: scattered sections of granite (as above)10 cm to l m wide generally with gradational contacts. .153.10 -153.45 Breccia: contacts 350 to CA., variety of fragments: - granite,sediments(?) and/or volcanics(?); black fragment to 10-12 mmwith 2 mm olive coloured reaction rim, matrix very fined grained, brown-olivegrey colour (sample).157.50 -158.65 Lamprophyre dyke: very fine grained, grey-buff: brecciatexture with grey olivine-serpentine (buff weathering) grains to 12 mm: matrixfine buff-weathering colour some with reddish tone (iron carbonate-rich?).Contacts 300 to CA.
HOLE: WF-2-98 ANGLE: -5Q0 AZIMUTH: 1200 LENGTH: 206.0 m
CO-ORDINATES: 5329065N 697740E ELEV: N/A
CORE SIZE: NQ DRILLED BY: Bradley Bros.
DATE STARTED: June 15/98 DATE FINISHED: June 18/9SC&KE
METRES
From To
O- 3.3
3.3 - 115.70
115.70 -119.60
119.60 -158.5
LOGGED BY: S. Winter
j/Vawa
page l of 2
DESCRIPTION
Casing
Granite: massive, med. grained, equigranular: q5T5^57 K-spar 6007o: plagioclase 200Xo: mafics (mainly biotite) 50Xo: foliation at 450 to CA: generally pink to salmon-pink, scattered granite peg. 10 cm to l m in length.
36.6 - 37.25 Lamprophyre dyke: grey-brown, fine grained matrix with grey olivine grains from l mm to 5 mm (serpentinized olivine): fine mica (phlogopite?) in matrix: contacts 60-650 to CA (sample).
77.0 - 83.0 Pink colouration of granite plus chl. along joint/slip surfaces.
52.15 - 52.40 Lamprophyre dyke: very fine grained, grey-brown matrix with black olivine grains to 2 mm. Contacts at 400to CA; contacts are very fine grained and foliated.
54.85 - 55.10 Lamprophyre dyke (as above): Upper contact at 550 and lower at 250 : very fine grained foliated material on contacts.
Granodiorite (gneissic): coarse grained, grey; foliation 450 to CA. Short sections medium grained pink granite that cross-cut foliation: small 1-2 cm dyklets of red granite and pegmatite: pegmatite to 5 cm.
Granite: as above: foliation 450 to CA., pegmatites 1-2 cm to l m.
119.80 -119.90 Lam prophyre dyke: very fine grained dark olive green colour to grey-black, olivine grains black to grey 0.5 mm to l mm; contacts at 400450 to CA, with concentration olivine grains along contacts.
METRES
From To
158.5 -187.0
187.0 -197.0
197.0 - 206.0
206.0
DESCRIPTION
130.25 -130.35 Lamprophyre dyke: very fine grained, grey-brown; crowded with 1-1.5 mm olivine grains; contacts at 450 to CA.
130.50 -130.65 Lamprophyre dyke (as above), very fine grained and foliated along contacts at 300 to CA.
Granodiorite (as above) well foliated due to biotite along foliation planes at 450
toCA.
Granite: massive, medium grained, pink; biotite gives foliation at 450 to CA.,
pegmatite dykes 2 cm to 1.5 m wide.
Granodiorite (as above): well foliated at 450 to CA.: generally more pink in
CasingGranite: med. grained, generally salmon-coloured, subtle foliation at 450 to CA: quartz 1507o, K-spar 6007o, plagioclase 2007o; mafics 507o - biotite, hornblende; to 35 m generally well fractured/jointed with chl on slip surfaces. 38.90 - 39.10 Lamprophyre dykes: in this interval are three (3) dark-green- grey dyklets: very fine grained, dark green/grey matrix crowded with grey olivine grains (alt. to serp).40.65 - 40.75 Lamprophyre dyke: very fine grained dark-green/grey matrix crowded with-1 mm +/- grains black olivine: foliated contacts at 350 to CA. Granodiorite: coarse grained, grey, with pinkish sections: foliated at 450 to CA due to 1507o biotite along foliation surfaces: qtz 1507o; K-spar 3507o: plagioclase 3507o: sections of typical granite (as above) pink, medium grained with ptygmatic veins and pegmatites cross-cutting granodiorite: pegmatites 2 3 cm to l m.58.85 - 60.2 7007o biotite (qtz+K-spar), well foliated at 400 ; sharp contacts - an early metamorphosed dyke?81.2 Qtz vein: 10 cm at 450 to CA. ^^—-"i^R" \ 92.90 - 93.0 Lamprophyre dyke: 10 cm: verffSS^mA aarrgrey\c
METRES
From To
150.9-155.05
155.05-200.5
200.50 - 220.5
220.5 - 230.0
230.0
DESCRIPTION
94,3 Lamprophyre dyke: 8 mm very fine grained dark brown-green dyke at 30" to CA.
94.9 Lamprophyre dyke: 20 mm: very fine grained, dark brown-green: contacts at 30" to CA.
98.5 Lamprophyre dyke: 20 mm: very fine grained, dark brown-green matrix crowded with 0.5 -1 mm olivine grains (30"Xo): contacts at 300to CA.
133.6 -133.7 Lamprophyre dyke: matrix, very fine grained, dark grey-black to brown, crowded with grey olivine (serp.) 0.5 mm to 3 mm with an ovoid to rectangular shape: contacts at 500 to CA.
145.4 -145.85 Lamprophyre dyke: grey-brown colour, very fine grained matrix, central part crowded with 1-2 mm olivine grains - sections appear to be iron carbonate-rich(?): foliated along contacts at 45" to CA.
149.0-150.9 Granite (as above 4.0 - 46.0).
Kimberlite(?) Dyke: dark grey to black: matrix fine to medium grained withcoarse phlogopite(?) crystals: matrix olivine plus micas: Upper contact at30" to CA; lower at 45" to CA. (Jason Rickard samples)Granite: (as above 4.0 - 46.0) - massive to very subtle foliation: 1-5 cmpegmatite dykes.186.1 -188.0 Mafic dyke: massive, dark green-black, very fine grained,equigranular: plagioclase (?) plus mafics. Contacts sharp at 55" to CA.Granodiorite (as above): coarse grained, well foliated with biotite: foliation 50" toCA.
Granite (as above): over last 3 metres becomes very massive, equigranular, grey, non-foliated: scattered pegmatite dykes up to 20 cm long.
DATE STARTED: June 24/98 DATE FINISHED: June 29/98
METRES
From To
O -4.0
4.0 ~- 22.0
22.0 - 32.80
32.80 - 33.75
33.75-42.10
CORE STORAGE: Wawa
page 1 of 2
DESCRIPTION
Casing
Granodiorite: coarse grained, grey, well
RECEIVEDMAR - 8 2CC3
GEOSCIENCE ASSESSMENT OFFICE
oliated; quartz 150Xo, K-spar 350Xo,plagioclase 35"Xo; biotite 15"Xo; foliation at 30" - 450 to CA; pegmatite dykes froml cm to l m long: grades into typical granite at 22 m.Granite: medium grained, foliated 45C to CA: grey to pink: qtz 150Xo: K-spafr'65%;plagioclase 150Xo; biotite 50Xo.Lamprophyre dyke: very fine grained, grey-black matrix with very fine grainedmica, crowded with grey olivine (serp.) generally 0.5 - 2 mm but up to8 mm: 500Xo olivine, 100Xo mica: 40"Xo matrix. Contacts 450 to CA, 10 cm atcontacts very fine grained and foliated.Granite: (as above)
42.1 - 42.35 lamprophyre dyke: very fine grained, grey-green matrix: 5 mm at contacts crowded with grey olivine (serp.) grains of 0.5 mm: at 42 m - 5 cm of black olivine grains in very fine grained matrix: contacts at 45" to CA.
42.35 - 55.55 Massive granite, pink colour, weak foliation, all joints/slip planes covered with dark green chl. Pegmatite dykes up to 50 cm long.
57.0 - 58.0 Dyke of typical medium grained granite with central pegmatite core then pegmatite on lower contact.
58 O - 60 3:65 O - 66 30:67.0 -70.5.71.3 - 71.8: 72.1 - 72.3: 72.5 - 72.85: 73.1 -73.3: 74.4 80.3: these are all sections of pegmatite dykes in typical granite.
WF-5-98
METRES
page 2 of 2
DESCRIPTION
From To
85.0 - 88.4 Pegmatite gradually becoming finer grained and grading into pink, medium grained granite dyke.
109.2 -109.38 Lamprophyre dyke: very fine grained grey-green to brown, centre crowded with 0.5 -1 mm grey olivine grains (300Xo), contacts very fine grained, foliated at 50C to CA: one small 1 cm parallel dyke also.
120.0 -148.0 Scattered 1-4. mm wide qtz-iron carbonate veinlets at 30" to CA.
196.7-199.55-
199.5-209.0
209.0
136.4 - Shear zone: strongly sheared at 30 0to CA across 25 mm: 900Xo chlorite with minor amounts qtz and feldspar.
176.85 -177.0 Lamprophyre dyke: very fine grained, grey-brown matrix, crowded with olivine 1-2 mm to 6 mm (500Xo): very fine mica in matrix: 10 mm on each contact, very fine grained, foliated at 50" to CA.
184.9 -185.0 Lamprophyre dyke: as above. No foliated contacts: contacts at 30" to CA all dyke crowded with grey olivine (serpentine) 0.5 to 5 mm.
186.05 -186.25 Lamprophyre dyke: as above contacts at 45" to CA; upper contact 10 mm, very fine grained foliated material: lower contact sharp and dyke crowded with olivine.
195.55- Lamprophyre dyke: as above 5 cm wide: contacts 45" to CA.
Lamprophyre dyke(s) with central later(?) Kimberlite(?) dyke.
196.7 -197.2 and 199.15 -199.55 Lamprophyre as above, contacts at 45" to CA. Lower magnetism than central core (below).
197.2 -199.15 Kimberlitef?): Very fine grained, dark grey-black, matrix; scattered spots of white carbonate, coarse grains black olivine and dark magnetite-rich clots: and coarse phlogopite(?) grains to 8 mm: 2-10 mm wide, white, irregular carbonate veinlets strongly magnetic. (Jason Rickard samples).
Granodiorite: typical coarse grained, grey to pink with dykelets pink granite and pegmatite 10 cm to 1 m. End of hole.
CasingGranodiorite: medium to coarse grained, grey; quartz 1507o, K-spar 3507o,plagioclase 3507o; biotite 1507o; foliation at 450 to CA.7.45 - 8.50 Lamprophyre dyke; very fine grained, grey-brown, carbonaterich(?) very irregular contacts, dyke maybe parallel to core.9.25 -10.90 Aplite dyke: very fine grained, brick-red colour, massive,l 07o hornblende phenocrysts; contacts 300 to CA.19.0 -19.55 Lamprophyre dykes: contacts in broken core.
21.30 - 21.40: 21.50 - 21.65 Contacts at 550(?): very fine grained, grey-black
with black olivine grains generally up to l mm but up to 10 mm in somesections: some sections alt to buff colour.32.0 - 40.0: 5 to 8 mm diam mafic clots cored by magnetite -approx 1 07o by
volume.46.0 - 53.0 Very well foliated, grey, biotite-rich to produce foliation.54.80 - 55.60 Mafic dyke: very fine grained: massive, hornblende phenocrystsapprox. l "/o dark grey-brown matrix with scattered 1-2 mm red feldspar(?)
phenocrysts.
page 2 of 2
From To
DESCRIPTION
82.0-142.0 Coarse granodiorite as above, gradual reduction in number pegmatites.
109.0 -Lamprophyre dyke: very fine grained, 10 mm wide at 65" to CA, browngreen/grey with 1 mm olivine.
109.9-Lamprophyre dyke: very fine grained, brown-green/grey at 300 to CA.
113.35-Lamprophyre dyke: 20 mm wide; brown-grey, very fine grained, matrix crowded (800Xo) with olivine grains (alt. grey-buff) to 10 mm.
113.60-Lamprophyre dyke: as above; 400Xo olivine 25 mm wide.
142.0 -152.0 Granodiorite: core generally broken many joint/slip surfaces with fine chl. core generally salmon-red (hematite alt.) (fracture zone).
152.0 - 251.0 Granodiorite, coarse grained, grey, foliated at 45" due to biotite along foliation planes.
164.0-Lamprophyre dyke: 5 cm, very fine grained, grey-black with 1-2 mm black olivine grains, contacts 750 to CA.
171.0 -171.45 Kimberlite(?) dyke: very fine grained, dark grey to black matrix withgrains/specks white carbonate 0.5 mm; fine 1 mm veinlets white carbonate; matrix containsfine grains of mica: grains of black olivine up to 2-3 mm,contacts at 600 to CA; 10 mm on each contact, very fine grained and foliatedparallel to contact.
205.7 - Lamprophyre dyke: 35 mm wide, contacts 200 to CA; 10 mm on each contact very fine grained and foliated: central 15 mm very fine grained brown- grey matrix crowded with olivine grains (700Xo) to 2-3 mm.
210.15-Lamprophyre dyke: as above, 25 mm wide contacts at 20" to CA.
220.7 Lamprophyre dyke: very fine grained, matrix, grey to dark grey-green, very fine mica: black olivine grains to 2 mm from 0.5 mm: contacts 30" to CA.
234.1 - 234.5 Granite dyke: fine-medium grained, salmon-red colour, massive, contacts 50" to CA.
251.0 End of hole.
'"H J"
-O'ltl
VDA
and MinesDeclaration of Assessment Work Performed on Mining Land
Mining Act, Subsection 65(2) and 66(3), R.S.0.1990
Transaction Number (office use)
Assessment Files Research Imaging
Personal information collected on this form is/ottained under the authority of subsection 65(2) and 66(3) of the Mining Act. Under section 8 of the Mining Act this information is a public record. This informbtn will be used to review the assesment work and correspond with the mining land holder. Questions about this
- - -- , Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbury,
•ecording a claim, use form 0240.42C01SW2001 2.20151 ISAAC 900
1. Recorded holder(s) (Attach a list if necessary)KJ^rriA
Kuwictitt (kwvla Gxplo&ooyilnc.Address , . . ,
S&l-Zao Gran w Ut St. VancouverBC t VGC /^
Name
Address
Client Number
Telephone Number
FaxNumber
Client Number
Telephone Number
Fax Number ,~
1
,'..
2. Type of work performed: Check (S) and report on only ONE of the following groups for this declaration.Geotechnical: prospecting, surveys, assays and work under section 18 (regs)
: drilling stripping, ' trenching and associated assays
Rehabilitation
Work Type
Dates Work From Performed i! Q(o V& TO (A io 9ft
| Month | Year Day | Month | Year
Global Positioning System Data (if available) Township/Area ^y^-^ ^ (S^AO
M or G-Plan Number 'J ^)T~\ -7
Office UseCommodityTotal S Value of Work ClaimedNTS Reference
in^^itij
Mining Division \̂^cd^7J^P /'Cfr+JtResident Geologist -^7 District (f^-^L^'^^\
L
'
Please remember to: - obtain a work permit from the Ministry of Natural Resources as required;- provide proper notice to surface rights holders before starting work;- complete and attach a Statement of Costs, form 0212;- provide a map showing contiguous mining lands that are linked for assigning work;- include two copies of your technical report.
3. Person or companies who prepared the technical report (Attach a list if necessary)Name Kevin &W.Address ,309 S. Coad Si, fhuMUr Bau* 0V, PlB ZYtName ^
Address
Name
Address
TejephoneJJumber
Fax Ni
Telepl-
FaxNt
Teleph
TrBEGi^^^Dme Number
MAR - R 2QQOnber
ne Number Of FICE
Fax Number
4. Certification by Recorded Holder or Agent1. V^\/ ir\ (C (t/ ( , do hereby certify that 1 have personal knowledge of the facts set forth in
this Declaration of Assessment Work having caused the work to be performed or witnessed the same during or after its completion and, to the best of my knowledge, the annexed report is true.Signature of Recorded Holder or Agent
Te^one^er
0241 (03^7)
Ontario Ministry ofNorthern Development and Mines
collection should be directed to a Provincial K Ontario, P3E 6B5.
Declaration of Assessment Work Performed on Mining Land
Mining Act. Subsection 65(2) and 66(3), R.S.0.1990
Transaction Number (office use)
Assessment Files Research Imaging
Personal information collected on this form is/o itained under the authority of subsection 65(2) and 66(3) of the Mining Act. Under section 8 of the Mining Act, this information is a public record. This informk )n will be used to review the assesment work and correspond with the mining land holder. Questions about this
ining Recorder, Ministry of Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbury,
Instructions: - For work performed on Crown Lands before recording a claim, use form 0240. - Please type or print in ink.
1. Recorded holder(s) (Attach a list if necessary)a™ kenwcfftt Ca/wda. Client Number
Tel .Number
MbC Fax Num
Name Client Number
Address Telephone Number3-i-
2. Type of work performed: Check (S) and report on only ONE of the following groups for this declaration.Geotechnical: prospecting, surveys, assays and work under section 18 (regs)
: drilling stripping, trenching and associated assays
Rehabilitation
Work Type
fti mW trillIM Total S Value Work Claims
Dates Work From Performed
ToYear day' | fcfonth | Year
Global Positioning System Data (if available) Township/Area T),
M or G-Plan Number
Please remember to: - obtain a work permit from the Ministry of Natural Resource- provide proper notice to surface rights holders before start!- complete and attach a Statement of Costs, form 0212;- provide a map showing contiguous mining lands that are link- include two copies of your technical report.
3. Person or companies who prepared the technical report (Attach a list if necessary)Name , , - y/
fiGlflfr ICll/l
Address 3)9 S,C0uri St. Thundtf&u, OA)t FtemName
Address
Name
Address
Telephone Number / ,,rtfflO-f-') ofyv ~ffav9
Fax Number , c 00r J t5VO*" wv v o
Telephone Number
Fax Number
Telephone Number
Fax Number
4. Certification by Recorded Holder or Agent, do hereby certify that l have personal knowledge of the facts set forth in
(Print Name)this Declaration of Assessment Work having caused the work to be performed or witnessed the same during or after its completion and, to the best of my knowledgejthe annexed report is true.Signature of Recorded Holder or Agent Date
Agent's Addj . ^ . , 4lhandrf fay0241 (03/97)
and MinesDeclaration of Assessment Work Performed on Mining LandMining Act, Subsection 65(2) and 66(3), R.S.0. 1990
Transaction Number (office use)
Assessment Files Research Imaging
Personal information collected on this form is obtain d under the authority of subsection 65(2) and 66(3) of the Mining Act. Under section 8 of the Mining Act, this information is a public record. This information wi l be used to review the assesment work and correspond with the mining land holder. Questions about this collection should be directed to a Provincial MiningJRecorder, Ministry of Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbury, Ontario, P3E 6B5.
Instructions: - For work performed on Crown Lands before recording a claim, use form 0240. - Please type or print in ink.
1. Recorded holder(s) (Attach a list if necessary)
Kwniutft m fa. Client Number
fa milk Telephone
I/AC Fax Num
Name Client Number
Address Telephone Number
Fax Number
2. Type of work performed: Check (S) and report on only ONE of the following groups for this declaration.Geotechnical: prospecting, surveys, assays and work under section 18 (regs)
/•/Physical: drilling stripping,^ trenching and associated assays
Rehabilitation
Work Type Office UseCommodityTotal S Value Work Claimed
Dates Work From Performed Day
Ok| Month | Year
/5 /O 98Day | Month | Year
NTS Reference
Global Positioning System Data (if available) Township/Area
M or G-Plan Number4-
Mining DivisionResident Geologist District
•assigning GE06CI&CEA
Please remember to: - obtain a work permit from the Ministry of Natural Resources as- provide proper notice to surface rights holders before starting wor- complete and attach a Statement of Costs, form 0212;- provide a map showing contiguous mining lands that are linked fo- include two copies of your technical report.
3. Person or companies who prepared the technical report (Attach a list if necessary)Name t/ 'wn CMAddress '30 S CourtName Telephone Number
Address Fax Number
Name Telephone Number
Address Fax Number
4. Certification by Recorded Holder or Agentl, ____JLffi/1 f*J IsJV/ i_________, do hereby certify that l have personal knowledge of the facts set forth in
(Print Name)this Declaration of Assessment Work having caused the work to be performed or witnessed the same during or after its completion and, to the best of my knowledge, the annexed report is true.Signature of Recorded Holder or Agent Mart A 6,
r /s s Q
0241 (03/97)
-y
VI"
Ontario Ministry ofNorthern Development and Mines
Schedule for Declaration of Assessment Work on Mining Land
Transaction Number (office use)
lTMining Claim Number. Or If
work was done on other eligible mining land, show In this column the location number Indicated on the claim map.
Number of Claim Units. For other mining land, list hectares.
Value of work performed on this claim or other mining land.
Value of work applied to this claim.
Value of work assigned to other mining claims.
Bank. VaWof work to be distributed at a future date.
ssvn Ib o32.00 0
SSVn .IG 0o0
ifc (0^00 0
oSS^r 0
6400 0sSm [to o
ILf 5Goo 0o
Ife 4*400SSrn It 0
6400 oIfc o
X. 1
Column Totals
0290(02/96)
iyc Schedule for Declaration of Assessment Work on Mining Land
Transaction Number (office use)
Mining Claim Number. Or if work was done on other eligible mining land, show in this column the location number indicated on the claim map.
Number of Claim Units. For other mining land, list hectares.
Value of work performed on this claim or other mining land.
Value of work applied to this claim.
Value of work assigned to other mining claims.
Bank, vto be distat a future date.
0tt 0
/^oo n
(SSAC TP
o 0
li?-Column Totals 7o3?o
0290 (02/96) 0 t*.
Ontario Ministry ofNorthern Developmentand Mines
Statement of Costs for Assessment Credit
Transaction Number (office use)
Personal information collected on this form is obtained under the authority of subsection 6 (1) of the Assessment Work Regulation 6/96. Under section 8 of the Mining Act, this information is a public record. This information will be used to review the assessment work and correspond with the mining land holder. Questions about this collection should be directed to a Provincial Mining Recorder, Ministry of Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbury, Ontario, P3E 6B5.
( Work TypeN
guQ)p(tf{ sofpofcrtbDt/WHoNfo ftKlL,Uflf(f
C&U IA(Mi5(\st J
Units of workDepending on the type of work, list the number of hours/day worked, metres of drilling, kilometres of grid line, number of samples, etc.
wF-/-?^ ^oimWP-Z-4?^ ^0(o m-
^/(Sno
Associated Costs (e.g. supplies, mobilization and demobilization).
Transportation Costs
Food and Lodging Costs , O , 'a'-.-* c ***~ ~"
Cost Per Unit of work
Q 3153
RECEIVEDMAR - 8 23C3
GEOSCIENCE ASSESSMENTnreirc
' :- 1
Total Value of Assessment Work
Total Cost
t{)Z,yqs
16MK
Calculations of Filing Discounts:
1. Work filed within two years of performance is claimed at 10007o of the above Total Value of Assessment Work.2. If work is filed after two years and up to five years after performance, it can only be claimed at 5007o of the Total
Value of Assessment Work. If this situation applies to your claims, use the calculation below:
TOTAL VALUE OF ASSESSMENT WORK x 0.50 = Total S value of worked claimed.
Note:- Work older than 5 years is not eligible for credit.- A recorded holder may be required to verify expenditures claimed in this statement of costs within 45 days of a request for verification and/or correction/clarification. If verification and/or correction/clarification is not made, the Minister may reject all or part of the assessment work submitted.
Certification verifying costs:
l, f-w'/A/ t~(y(_________, do hereby certify, that the amounts shown are as accurate as may reasonably(please print full name)
be determined and the costs were incurred while conducting assessment work on the lands indicated on the accompanying
Declaration of Work form as " pgKA/g"^ Tf" l(recorded holder, agent, or state company position with signing authority)
am authorized to make this certification.
0212 (03/97)
Signature Date
Ontario Ministry ofNorthern Developmentand Mines
Statement of Costs for Assessment Credit
Transaction Number (office use)
Personal information collected on this form is obtained under the authority of subsection 6 (1) of the Assessment Work Regulation 6/96. Under section 8 of the Mining Act, this information is a public record. This information will be used to review the assessment work and correspond with the mining land holder. Questions about this collection should be directed to a Provincial Mining Recorder, Ministry of Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbu/y, Ontario, P3E 6B5.
Work TypeUnits of work
Depending on the type of work, list the number of hours/day worked, metres of drilling, kilometres of grid line, number of samples, etc.
Cost Per Unit of work
Total Cost
StffMfcb
153
Associated Costs (e.g. supplies, mobilization and demobilization).
Transportation Costs
Food and Lodging Costs
f*.
Total Value of Assessment Work
Calculations of Filing Discounts:
1. Work filed within two years of performance is claimed at IOQ.% of the above Total Value of Assessment Work.2. If work is filed after two years and up to five years after performance, it can only be claimed at 500Xo of the Total
Value of Assessment Work. If this situation applies to your claims, use the calculation below:
TOTAL VALUE OF ASSESSMENT WORK K 0 .50 s Total S value of worked claimed.
Note:- Work older than 5 years is not eligible for credit.- A recorded holder may be required to verify expenditures claimed in this statement of costs within 45 days of a request for verification and/or correction/clarification. If verification and/or correction/clarification is not made, the Minister may reject all or part of the assessment work submitted.
Certification verifying costs:
i. j do hereby certify, that the amounts shown are as accurate as may reasonably(please print full name)
be determined and the costs were incurred while conducting assessment work on the lands indicated on the accompanying
Declaration of Work form as l am authorized to make this certification.
0212 (03/97)
(recorded holder, agent, or state company positlon with signing authority)
Signature \/] \s- y/u/^/cWo-
and MinesStatement of Costs for Assessment Credit
Transaction Number (office use)
Personal information collected on this form is obtained under the authority of subsection 6 (1) of the Assessment Work Regulation 6/96. Under section 8 of the Mining Act, this information is a public record. This information will be used to review the assessment work and correspond with the mining land holder. Questions about this collection should be directed to a Provincial Mining Recorder, Ministry of Northern Development and Mines, 3rd Floor, 933 Ramsey Lake Road, Sudbury, Ontario, P3E 6B5.
^ (J Work Type W/
~\B^ i CoiPI^K ^j^bttf^Ot^lAyK.oA/0 tK/tL/A/6"C ^^6^ //iG^x/Vf 6j2^~J
Units of workDepending on the type of work, list the number of hours/day worked, metres of drilling, kilometres of grid line, number of samples, etc.
U\^-~S~/^ ^Ov YY\.lvf'6-?^ ^5/^n
i (oQ ty^
Associated Costs (e.g. supplies, mobilization and demobilization).
Transportation Costs
Food and Lodging Costs
TflEtMA!
Cost Per Unit of work
tf /53
JtlVtU
- 8 2CC3REASSESSMENT
Total Value of Assessment Work
Total Cost
#10, Z ftO
lo, wo
Calculations of Filing Discounts:
t if^.'
1i
1. Work filed within two years of performance is claimed at 100^0 of the above Total Value of Assessment Work.2. If work is filed after two years and up to five years after performance, it can only be claimed at 500Xo of the Total
Value of Assessment Work. If this situation applies to your claims, use the calculation below:
TOTAL VALUE OF ASSESSMENT WORK x 0.50 s Total S value of worked claimed.
Note:- Work older than 5 years is not eligible for credit.- A recorded holder may be required to verify expenditures claimed in this statement of costs within 45 days of a request for verification and/or correction/clarification. If verification and/or correction/clarification is not made, the Minister may reject all or part of the assessment work submitted.
Certification verifying costs:
H(lM t do hereby certify, that the amounts shown are as accurate as may reasonably(please print full name)
be determined and the costs were incurred while conducting assessment work on the lands indicated on the accompanying
Declaration of Work form as(recorded holder, agent, or state company position with signing authority)
l am authorized to make this certification.
0212 (03/97)
,nday. July 24, 2000 2:05 PM Kevin K,vi (807) 345-6666
Status Subject: Transaction Number(s): W0050.00018 Approval After Notice
We have reviewed your Assessment Work submission with the above noted Transaction Number(s). The attached summary page(s) indicate the results of the review. WE RECOMMEND YOU READ THIS SUMMARY FOR THE DETAILS PERTAINING TO YOUR ASSESSMENT WORK.
If the status for a transaction is a 45 Day Notice, the summary will outline the reasons for the notice, and any steps you can take to remedy deficiencies. The 90-day deemed approval provision, subsection 6(7) of the Assessment Work Regulation, will no longer be in effect for assessment work which has received a 45 Day Notice. Allowable changes to your credit distribution can be made by contacting the Geoscience Assessment Office within this 45 Day period, otherwise assessment credit will be cut back and distributed as outlined in Section #6 of the Declaration of Assessment work form.
Please note any revisions must be submitted in DUPLICATE to the Geoscience Assessment Office, by the response date on the summary.
If you have any questions regarding this correspondence, please contact JIM MCAULEY by e-mail at [email protected] or by telephone at (705) 670-5880.
Yours sincerely,
ORIGINAL SIGNED BYSteve B. BeneteauActing Supervisor, Geoscience Assessment OfficeMining Lands Section
Correspondence ID: 15106
Copy for: Assessment Library
Work Report Assessment Results
Submission Number: 2.20151
Date Correspondence Sent: July 28,
Transaction Number
W0050.00018
First Claim Number
5000176
2000
Township(s) 1 Area(s)
DEBASSIGE, ISAAC
AssessorJIM MCAULEY
Status Approval Date
Approval After Notice July 1 5, 2000
Section:16 Drilling PDRILL
Assessment work credit has been approved for the work submission.
The TOTAL VALUE of assessment credit that will be allowed, based on the information provided in this submission, is 3173,502 as in the original submission.
At the discretion of the Ministry, the assessment work performed on the mining lands noted in this work report may be subject to inspection and/or investigation at any time.
Correspondence to: Recorded Holder(s) and/or Agent(s):
Resident Geologist Kevin KiviSouth Porcupine, ON THUNDER BAY, ON, CAN
Assessment Files Library KENNECOTT CANADA EXPLORATION INC. Sudbury, ON VANCOUVER, B.C.
Page: 1Correspondence ID: 15106
Ul
H"
CO
g n M
O
O
m t*
s ^
[i -w
ran i
TO
M
bID ri-
j?"
30
0 i-
CI 3
Qi
m
no Is:D
o m GO
f 3
* 3
S 4
3
3,tn
O
rt
O
Si
?
e
Za
O
O
3S
2 S
e s
5S
^ S
>
O
2
a 2*n m 33 S X tn
Y
NLY
m
5
S5
O FRO SPOS
m m m o m
FID
DLE
R
TWP
o S09
O A
O o H
O m
OD w
en o
m
KEES
ICKQ
UAY
ASH
TW
P.
o o
•H
o CD m CD
l ro -si
OJ
33 Z
S*D
fi)
—
w ^r
3O
^
OJ
3-f
s *
y s
3 n •y
v l 3
co
rns 5
o
**
— o
z 3.to n *.
*w
n
a
Q
r-
ti
S3?
"m"
-i • *- \if
S J i
j
s! o
t S
i l3
i i
i i
2 0
4D
C9
GO g
HO o COi
t*)
n S"
l J
"0m "
(T1
S 51
m
CANABRAVA DIAMOND CORPORATION
Whitefish Project, Ontario
1998 Drill Hole Location Map
a o
Whitefish Lake Project
. m
ISAAC KENNECOTT CANADA EXPLORATION
Whitefish Lake Project Index Map
NAD 27, ZONE 16
RECEIVEDJUL 17 2000
GEOSCIENCE ASSESSMENT OFFICE
m(S
UD OD
inTn
n ea
42C01SW2001 2.20151 ISAAC 220
Mar 07 00 09:32a Kevin K i v i [807) 345-6666 P-2
Cairns droppedor behra allowed to lapse"^
42C01SW2001 2.20151
MOR 07 '00 09:50
ISAAC 230
807 345 6666 PPGE.02
MAR 07 '00 09:12 FR SSM MINING LftNDS CONS 7059456935 TD TBflV MLC P .83
RECEIVED
o w 20 M 21 M 22 M
MICHANO TWP.
42C01SW2001 2.20151 ISAAC 240
MNDM - Mining Claim Map
Ontario Ministry of Northern Deveiopment and MinesMines and Minerals Division
Ontario Ministry of Northern Development and Mines Mines and Minerals Division
JLG-2365 - DEBASSIGE - SAULT STE. MARIE Division
Adjacent Ma
ooZoom Tools
help
Zoom Level
Order Hard Copy Download Map hele Scale ima
Order Form
JI23O428 L.v
i ii , '
c-lit "" " ~ ~ ~ i c*f*n
f)1230433 i 1230432
SSM
1230431
-.— l — .J . — ,, ^
SSM "A"" T S^M
^^7 i l?30 '*88 .'!A l
i?3o43s ;\ ! !230440 1230441 f
l \ l lA.
1230412.
ISAAC TWP.
of I
Back l Main Menu | Mining Lands
This Kite maintained by the Government of Ontario Comments and feedback to: ^te^e
M Copyright 1 998
MAR - S 2000GEOSCIENCE ASSESSMENT
OFFICE-——---.
This information is provided as a public service, but we cannot guarantee that the information is current or accurate. Readers should verify the information before acting on it.