The Biamp Dialer application is for use with Audia ® and Nexia ® systems and iOS devices. Designed to integrate with both analog and VoIP telephone systems, the application allows the end user to operate the integrated phone system from an Apple ® iPad ® , iPhone ® or iPod Touch ® . The application provides a numeric dialpad, send and receive levels, a number of other telephone controls and even the ability to dial directly from the contact list stored on the device. The application is available from the Apple App Store ® . BENEFITS • Provide the end user with elegant control of a telephone system without deploying a full control system • Deploy multiple presets in each room setup to allow for proper configuration of the application for dedicated uses • Ability to dial directly from the device’s Contacts folder for streamlined use FEATURES • Operates with AudiaFLEX ® with at least one TI-2 or VoIP-2 card • Operates with Nexia TC • Full 12-button dialpad • Configure an unlimited number of rooms • Configure an unlimited number of presets per room • Level controls for incoming and outgoing signals • Dial direct from iOS Device Contacts folder • Detect incoming calls automatically APPLICATION SPECIFICATIONS • Hardware Compatibility - iPad 1, iPad 2 - iPhone 3GS, iPhone 4 - iPod Touch 3rd Gen, iPod Touch 4th Gen • Operating System - Apple iOS 4.2 or Later • Available on the Apple App Store Biamp ® Dialer Application Downloadable Dialer Application for iOS Devices DATA SHEET Biamp Systems, 9300 S.W. Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.com