Standard equipment • Scania Engine Management System, EMS • Unit injectors, PDE • Twin turbochargers, heat insulated • Fuel pre-filter with water separator • Fuel filter • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in valve cover • Deep front oil sump • Oil dipstick, front • Starter, 2-pole 7.0 kW • Alternator, 2-pole 100A • Flywheel SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • Catwalk and cover for belt transmission • Closed crankcase ventilation • Operator’s manual Optional equipment • Electrical base system • Accelerator position sensor • Control panel • Instrument panel • Scania EMS display • Hydraulic pump • Side-mounted PTO • Front-mounted PTO • Exhaust connections • Engine heater • Power pack engine brackets • Stiff rubber suspension • Air cleaner • Studs in flywheel housing • Reversible fuel filter • Low coolant level reaction • Variable idle speed setting • Low oil sump • Oil draining with pump • Oil level sensor • Bilge pump SCANIA MARINE ENGINES DI16 079M. 460 kW (625 hp) IMO Tier II, EU Stage IIIA The marine engines from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes repairability and fuel economy.The engines are type approved in all major classification societies. The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque already at low revs. The engine can be fitted with many accessories such as air cleaners, PTOs, transmis- sions and type approved instrumentation in order to suit a variety of installations. This specification may be revised without notice. Engine speed (rpm) Rating 1200 1500 1800 Gross power, full load (kW) ICFN 368 437 460 Gross power, full load (hp, metric) 501 595 625 Gross power, propeller curve (kW) 167 292 460 Gross power, propeller curve (hp, metric) 227 397 625 Gross torque (Nm) 2931 2784 2440 Spec fuel consumption. Full load (g/kWh) 199 199 207 Spec fuel consumption. 3/4 load (g/kWh) 197 202 211 Spec fuel consumption. 1/2 load (g/kWh) 201 202 218 Spec fuel consumption. Propeller curve (l/h) 40 70 113 Optimum fuel consumption (g/kWh) 197 Heat rejection to coolant* (kW) 285 331 367 *Including charge air ICFN - Continuous service: Rated power available 1 h/1 h. Unlimited h/year service time at a total load factor of 100%.