Dhcp server in Windows Server 2003

HOW TO CONFIGURE DHCP SERVER SERVER

MADE BY ARIEF RIFKI FADILLAH

Firstly, Open control panel and open “Add or Remove Programs”

Secondly, Click “Add/Remove Windows Components”

Thirdly, Give Checklist “Network Services”. If it be installed , click it to “Detail”

Next, click ok and next

Next, open the DHCP

Next, Click “New scope” to make a scope

Next, click next. After that give a name and description .

Give a start IP and end IP. You can skip “New Scope Wizard”

Next, Give duration to your DHCP. Click next.

Next, Give an IP of your default gateway. And give a name for DNS server.

Next, Skip only for WINS server. And Click Next

The Installation Has been complited

It’s Finished

If your client had a different IP with your DHCP IP, you must change it with DHCP

Your Server and client has been connected

Now, Make a second scope with a same step

Don’t different with first scope

Next, Change with second scope

If you don’t get a Trouble. It’s Finished

Thank You For Watching