Report No.: RF120113E07B-2 1of 22 Report Format Version 5.0.0 Reference No.: 120604E05 DFS TEST REPORT (Validation Test) REPORT NO.: RF120113E07B-2 MODEL NO.: FXE2000-G FCC ID: PQRFXE2000-G RECEIVED: Jan. 30, 2013 TESTED: Feb. 22, 2013 ISSUED: Feb. 22, 2013 APPLICANT: Contec Co., Ltd. ADDRESS: 3-9-31, Himesato, Nishiyodogawa-ku Osaka Japan 555-0025 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification
22
Embed
DFS TEST REPORT (Validation Test) - FCC ID Search · DFS TEST REPORT (Validation Test) REPORT NO.: ... Reserving 36 Bytes for Global Data at: ... (u-boot),64k(u-boot-env),6144k ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Report No.: RF120113E07B-2 1of 22 Report Format Version 5.0.0 Reference No.: 120604E05
DFS TEST REPORT (Validation Test) REPORT NO.: RF120113E07B-2
TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C.
TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C.
This report should not be used by the client to claim
product certification, approval, or endorsement by
TAF or any government agencies.
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification
Report No.: RF120113E07B-2 2of 22 Report Format Version 5.0.0 Reference No.: 120604E05
STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96
The above equipment (Model: FXE2000-G) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Bra nch , and was in compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report.
Report No.: RF120113E07B-2 5of 22 Report Format Version 5.0.0 Reference No.: 120604E05
2. EUT INFORMATION
2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT
Table 1: Operating frequency bands and mode of EUT.
Operational Mode Operating Frequency Range
5250~5350MHz 5470~5725MHz
Master � �
Slave without radar detection � �
2.2 EUT SOFTWARE AND FIRMWARE VERSION
Table 2: The EUT software/firmware version.
No. Product Model No. Software/Firmware Version
1 Wireless LAN Adapter FXE2000-G 1.03.06
2.3 EUT S/N NUMBERS
Table 3: The EUT S/N numbers.
No. Device function Model No. S/N numbers
1 Master FXE2000-G S/N: BDYMG69000285
2 Slave FXE2000-G S/N: BDYMG69000288
Report No.: RF120113E07B-2 6of 22 Report Format Version 5.0.0 Reference No.: 120604E05
3. TEST & SUPPORT EQUIPMENT LIST
3.1 TEST INSTRUMENTS
Table 1: Test instruments list.
DESCRIPTION &
MANUFACTURER MODEL NO. BRAND
CALIBRATED
DATE
CALIBRATED
UNTIL
R&S Spectrum analyzer FSP40 R&S May 09, 2012 May 08, 2013
Signal generator 8645A Agilent Aug. 24, 2012 Aug. 23, 2013
Oscilloscope TDS 5104 Tektronix Mar. 08, 2013 Mar. 07, 2014
3.2 DESCRIPTION OF SUPPORT UNITS
This EUT was functioned as a Master & Slave device during the DFS test.
Report No.: RF120113E07B-2 7of 22 Report Format Version 5.0.0 Reference No.: 120604E05
4. TEST PROCEDURE
4.1 BVADT DFS MEASUREMENT SYSTEM:
A complete ADT DFS Measurement System consists of two subsystems: (1) the Radar Signal Generating Subsystem and (2) the Traffic Monitoring Subsystem. The control PC is necessary for generating the Radar waveforms. The traffic monitoring subsystem is specified to the type of unit under test (UUT). Conducted setup configuration of ADT DFS Measuremen t System The test transmission will always be from the Master Device to the Client Device. While the Client
device is set up to associate with the Master device and play the MPEG file (6 Magic Hours) from
Master device, the designated MPEG test file and instructions are located at:
http://ntiacsd.ntia.doc.gov/dfs/.
Spectrum
Analyzer
Radar Signal Generating
Subsystem
Oscilloscope
C/S
Attenuator
Attenuator
C/S Attenuator
Control PC
Support Unit Master /
Client with
DFS function
Traffic Monitoring
Report No.: RF120113E07B-2 8of 22 Report Format Version 5.0.0 Reference No.: 120604E05
5. TEST RESULTS
5.1 SUMMARY OF TEST RESULT
Clause Test Parameter Remarks Pass/Fail
15.407 Channel Move Occurred Applicable Pass
5.2 TEST PROCEDURE
Step 1 . Set EUT into Channel 100 (5500MHz)
Step 2. Waiting for the end of the CAC time, launch Radar type1 on Channel 100 ,
Step 3、When the EUT detector the radar at channel and move to channel 104, observed the
message on the console information and find the signal switch off at channel 100 on the
spectrum analyzer
Step 4、EUT link into Channel 104 (5520MHz),waiting for the end of the CAC time,
launch Radar type1 on Channel 104.
Step5、When the EUT detector the radar at channel and move to channel 108, observed the
message on the console information and find the signal switch off at channel 104 on the
spectrum analyzer.
Step6、EUT link into Channel 108 (5540MHz),waiting for the end of the CAC time, launch
Radar type1 on Channel 108.
Step7、When the EUT detector the radar at channel and move to channel 112, observed the
message on the console information and find the signal switch off at channel 108 on the
spectrum analyzer.
Step8、EUT link into Channel 112 (5560MHz),waiting for the end of the CAC time, launch
Radar type1 on Channel 112.
Step9、When the EUT detector the radar at channel and move to channel 116, observed the
message on the console information and find the signal switch off at channel 112 on the
spectrum analyzer.
Report No.: RF120113E07B-2 9of 22 Report Format Version 5.0.0 Reference No.: 120604E05
Step10、EUT link into Channel 116 (5580MHz),waiting for the end of the CAC time,
launch Radar type1 on Channel 116.
Step11、When the EUT detector the radar at channel and move to channel 132, observed the
message on the console information and find the signal switch off at channel 116 on the
spectrum analyzer.
Step12、EUT link into Channel 132 (5660MHz),waiting for the end of the CAC time,
launch Radar type1 on Channel 132.
Step13、When the EUT detector the radar at channel and move to channel 136, observed the
message on the console information and find the signal switch off at channel 132 on the
spectrum analyzer.
5.2 TEST RESULT
The test results are channel move occurred after detecting a radar signal.