EFFECTIVE MARCH 6 2006 DFG-100 XCEL SERIES GAS CONVECTION OVEN REPLACEMENT PARTS LIST Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are not available. ERRORS: Descriptive and/or typographic errors are subject to correction. www.blodgett.com BLODGETT OVEN COMPANY, 44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802) 860-3700 (800) 331-5842 Fax: (802) 860-3732 www.blodgett.com
16
Embed
DFG-100 XCEL SERIES GAS CONVECTION OVEN … xcel series gas convection oven replacement parts list ... oven off cool down high fan low fan hr/min 1 ... each, qty 5 per oven 6 36900
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EFFECTIVE MARCH 6 2006
DFG-100 XCEL SERIESGAS CONVECTION OVEN
REPLACEMENT PARTS LIST
Superseding All Previous Parts Lists.The Company reserves the right to make substitution in the event that items specified are not available.ERRORS: Descriptive and/or typographic errors are subject to correction.
IMPORTANT: When ordering parts, please provide the model, gastype and serial number of the oven. The identification plate islocated above the right hand door under the ledge.
SERIAL NUMBER LOCATION / KEY:
MARCH 6, 2006 2 DFG100 XCEL
TO OBTAIN LITERATURE:Blodgett Literature Department
33147 Wheel Puller3 37022 Motor, 115V, 3/4 HP, 2 SP15 37453 Motor Mount & Panel Assy4 4342 Lamp, Qty 2 per oven
4922 Socket, for Lamp Qty 2 per oven36435 Housing, for Socket & Lamp
5 18768 Racks, Each, Qty 5 per oven6 36900 Rack Support Kit, Set of 214 36620 Stops, Rack Each Qty 2 per oven7 37202 Combustion Compartment Cover
1
3
2
4
5
6
7 8
9
10
11
12
14
13
15
SEE PAGE 10 FOREXPLODED VIEW OF BURNER.
LINER
NOT
REPLACEABLE
Ref. PartNo. No. Description
8 36427 Burner Assy, In Shot NAT8 36428 Burner Assy, In Shot LP9 36512 Cover, Access Panel10 22301 Axial Fan, Qty 111 36621 Bodytop, with opening for flue box12 36407 Bodyside, RH13 37205 Bodyside, LH
36698 Bodyback
Ref. PartNo. No. Description
1 36427 Burner Assy, In Shot NAT1 36428 Burner Assy, In Shot LP2 36417 Mounting Bracket, for burner3 36416 Manifold Assy4 38453 Ignitor Upgrade Kit
Consists of Flame Sensor Probe and Ignitor Rod4 38521 Flame Sensor Probe4 38521 Ignitor, Spark Rod
R4633 Flame Sensor Wire5 33249 Flex Hose, for Manifold6 1949 Nipple, Close 1/2 NPT8 36627 Brace, for Manifold9 36511 Bracket, for Manifold, Qty 2 per oven10 16118 Reducer, 3/4 to 1/2"11 36415 Orifice, Main Burner Qty 4 per oven, Specify gas type & model) BLANK
36544 Orifice, Main Burner Pre-Drilled NAT36545 Orifice, Main Burner Pre-Drilled LP36605 SparkWire, Flame Sensor
BURNER & PIPING, EXPLODED
MARCH 6, 2006 12 DFG100 XCEL
1
2
3
45
6
8
9
9
10 11
GAS VALVE ASSY
Ref. PartNo. No. Description
1 36608 Dual Gas Valve Assy2 36229 Flex Tubing, with fittings acts as thru pipe
1
MARCH 6, 2006 13 DFG100 XCEL
2
Ref. PartNo. No. Description
37240 Door Assy Sld, RH1 37241 Door Assy, Sld LH2 37242 Door Assy, Gls RH3 37243 Door Assy, Gls LH
9035 Window Tool, for installation and removal ofwindow assy
4 9036 Window Assy., Drop In (10-1/8" x 17-1/8")17558 Door Handle, Porc.
5 18081 Top Plate, Door Handle15 90017 Washers, Door (Set of 2)6 90004 Bushings, Door Hinge (Set of 2)7 16657 Sleeve, Upper Door Bushing8 17557 Hinge Pin, Upper Door9 17311 Center Trim, Door10 36606 Pressure Lock11 36876 Gasket Assy, Perimeter12 36037 Lower Door Support Assy13 35193 Microswitch, Door14 16470 Nameplate16 90076 Arm Assy, RH
20359 Arm Assy, w/welded hinge pin, LH
DOOR COMPONENTSMARCH 6, 2006 14 DFG100 XCEL
Left Hand Door
Right Hand Door -
Attached to unit
4
2
3
1
13
11
6
7
8
15
16
6
6
12
Side View,Lower Door
Support Assy
DOOR HINGECOMPONENTSLeft Hand Door
10
8
9
8
10
9
14
14
4
5
5
MARCH 6, 2006 15 DFG100 XCEL
LOWER DOOR SUPPORT COMPONENTS
Ref. PartNo. No. Description
1 36037 Lower Door Support Assy
NOTE: Lower Door Support Assy includes the hinge pins, arms,chain & turnbuckles, sprocket assys, cam assy, and microswitch.
2 35193 Microswitch, Door3 90076 Arm Assy, RH4 20359 Arm Assy, w/welded hinge pin, LH
1
4
3
NOTE: IF YOU NEED TO REPLACE THE SPROCKETS, CHAIN & TURNBUCKLE, OR THEHINGE PIN WE STRONGLY SUGGEST ORDERING THE ENTIRE LOWER DOOR SUPPORT.
IT WILL INCLUDE ALL OF THESE COMPONENTS AND WILL GREATLY REDUCE YOURLABOR COSTS AND TIME INVESTED.
4 8600 Legs, 6" w/ Bolts, S/S Set of 45 8598 Legs, 25" w/ Bolts, S/S Set of 45 36532 Legs, 19" w/Bolts, S/S Set of 4
with feet36533 Legs, 19" w/Bolts, S/S Set of 4
no feet, for use with casters33196 Seismic Legs, 6", S/S Set of 492000 Studs, Leg Set of 47847 Bolts, Leg Set of 8
6 5779 Casters w/ Plate Set of 4 Dbl Oven16002 Casters Set of 4 Sgl Oven Only19528 Casters, Low Profile Set of 4 Dbl Oven31013 Casters, Heavy Duty Low Profile
Set of 4 (Jarvis & Jarvis) Dbl Oven* 6486 Open Stand w/ Feet, S/S DFG100* 11416 Open Stand w/ Casters, S/S DFG100