UK Supplement to Operating Manual Device Information Hydraulic Module HMD 1/(R)SE Accessories for Dual Air / Water Heat Pumps 83062600eUK – Translation into English of the original German operating manual
UK
Supplement to Operating Manual
Device InformationHydraulic Module HMD 1/(R)SE
Accessories forDual Air / Water Heat Pumps
83062600eUK – Translation into English of the original German operating manual
2 Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Please read firstThe “Model Device Information” is an integral part of the product. It supplements the operating manual “HMD 1/E Air/Water Heat Pump, Outdoor Installation”. In ad-dition to this “Model Device Information”, the operating manual “HMD 1/E” must also be available to you.
Since this “Model Device Information” was written for several different models of the unit, always comply with the parameters for the respective model.
The “Model Device Information” is intended only for persons assigned to work on or operate the unit. Treat all constituent parts confidentially. The information con-tained herein is protected by copyright. No part of this information may be reproduced, transmitted, copied, stored in electronic data systems or translated into an-other language, either wholly or in part, without the ex-press written permission of the manufacturer.
3Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Contents
INFORMATION FOR OPERATORS AND QUALIFIED SPECIALISTS
PLEASE READ FIRST ..................................................................2
INFORMATIONS FOR QUALIFIED TECHNICIANS
TECHNICAL DATA/SCOPE OF DELIVERYHMD 1/(R)SE ..........................................................................4
PERFORMANCE CURVESFree compression .................................................................6
TERMINAL DIAGRAM ...............................................................7
CIRCUIT DIAGRAMS ................................................................8
4 Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Unit designation HMD 1/SE HMD 1/RSEAccessory for heat pump model LWD 50ASX - LWD 70ASX ı LWD 50ARSX - LWD 70ARSX • applicable ı — not applicable • ı — — ı •
Functionally necessary • applicable ı — not applicable • •Installation location Indoors ı Outdoors • applicable ı — not applicable • ı — • ı —
Maximum indoor temperature °C — 35Maximum relative humidity % — 60
Conformity CE • •Heating circuit Heating circuit efficiency pump integrated: • yes — no — —
Heating circuit free compression ∆p (factory setting) ı Maximum free compression ∆pmax ı Volume flow bar ı bar ı l/h 0,46 ı 0,54 ı 1600 0,46 ı 0,54 ı 1600
Volume flow: minimum flow rate ı maximum flow rate l/h 900 ı 2000 900 ı 2000max. permissible operating pressure bar 3 3Integrated expansion vessel ı Volume ı Initial pressure • yes — no ı l ı bar • ı 12 ı 1,5 • ı 12 ı 1,5Buffer tank integrated: • yes — no — —Heat metering and/or flow rate display integrated: • yes — no • •
General unit data Housing dimensions (Height ı Width ı Depth) mm ı mm ı mm 695 ı 550 ı 330 695 ı 550 ı 330Total weight kg 25 25Connections Heating water inlet (forward flow) ... R 1" Innen R 1" Innen
Hot water outflow (forward flow) ... R 1" Innen R 1" InnenElectrics Voltage code ı three-phase circuit breaker heat pump 5 kW**) ... ı A 1~/N/PE/230V/50Hz ı C16 1~/N/PE/230V/50Hz ı C16
Voltage code ı three-phase circuit breaker heat pump 7 kW**) ... ı A 1~/N/PE/230V/50Hz ı C20 1~/N/PE/230V/50Hz ı C20Voltage code ı circuit breaker control voltage **) ... ı A 1~/N/PE/230V/50Hz ı B16 1~/N/PE/230V/50Hz ı B16Voltage code ı circuit breaker electric heating element 1~230V**) ... ı A 1~/N/PE/230V/50Hz ı B32 1~/N/PE/230V/50Hz ı B32Voltage code ı circuit breaker electric heating element 3~230V**) ... ı A 3~/PE/230V/50Hz ı B16A 3~/PE/230V/50Hz ı B16AProtection type IP 20 20Output electric heating element 3 ı 2 ı 1 phase kW ı kW ı kW 6 ı 4 ı 2 6 ı 4 ı 2Heating circuit pump: maximum power consumption ı current consumption kW ı A 0,07 ı 0,31 0,07 ı 0,31
Safety equipment Safety assembly heating circuit ı Safety assembly heat source in scope of delivery: • yes — no • ı — • ı —Heating and heat pump regulator Incl. in scope of delivery: • yes — no • •Overflow valve integrated: • yes — no — —
** comply with local regulations 813312b 813313b
Technical data / scope of delivery
5Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Unit designation HMD 1/SE HMD 1/RSEAccessory for heat pump model LWD 50ASX - LWD 70ASX ı LWD 50ARSX - LWD 70ARSX • applicable ı — not applicable • ı — — ı •
Functionally necessary • applicable ı — not applicable • •Installation location Indoors ı Outdoors • applicable ı — not applicable • ı — • ı —
Maximum indoor temperature °C — 35Maximum relative humidity % — 60
Conformity CE • •Heating circuit Heating circuit efficiency pump integrated: • yes — no — —
Heating circuit free compression ∆p (factory setting) ı Maximum free compression ∆pmax ı Volume flow bar ı bar ı l/h 0,46 ı 0,54 ı 1600 0,46 ı 0,54 ı 1600
Volume flow: minimum flow rate ı maximum flow rate l/h 900 ı 2000 900 ı 2000max. permissible operating pressure bar 3 3Integrated expansion vessel ı Volume ı Initial pressure • yes — no ı l ı bar • ı 12 ı 1,5 • ı 12 ı 1,5Buffer tank integrated: • yes — no — —Heat metering and/or flow rate display integrated: • yes — no • •
General unit data Housing dimensions (Height ı Width ı Depth) mm ı mm ı mm 695 ı 550 ı 330 695 ı 550 ı 330Total weight kg 25 25Connections Heating water inlet (forward flow) ... R 1" Innen R 1" Innen
Hot water outflow (forward flow) ... R 1" Innen R 1" InnenElectrics Voltage code ı three-phase circuit breaker heat pump 5 kW**) ... ı A 1~/N/PE/230V/50Hz ı C16 1~/N/PE/230V/50Hz ı C16
Voltage code ı three-phase circuit breaker heat pump 7 kW**) ... ı A 1~/N/PE/230V/50Hz ı C20 1~/N/PE/230V/50Hz ı C20Voltage code ı circuit breaker control voltage **) ... ı A 1~/N/PE/230V/50Hz ı B16 1~/N/PE/230V/50Hz ı B16Voltage code ı circuit breaker electric heating element 1~230V**) ... ı A 1~/N/PE/230V/50Hz ı B32 1~/N/PE/230V/50Hz ı B32Voltage code ı circuit breaker electric heating element 3~230V**) ... ı A 3~/PE/230V/50Hz ı B16A 3~/PE/230V/50Hz ı B16AProtection type IP 20 20Output electric heating element 3 ı 2 ı 1 phase kW ı kW ı kW 6 ı 4 ı 2 6 ı 4 ı 2Heating circuit pump: maximum power consumption ı current consumption kW ı A 0,07 ı 0,31 0,07 ı 0,31
Safety equipment Safety assembly heating circuit ı Safety assembly heat source in scope of delivery: • yes — no • ı — • ı —Heating and heat pump regulator Incl. in scope of delivery: • yes — no • •Overflow valve integrated: • yes — no — —
** comply with local regulations 813312b 813313b
6 Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Free compression HMD 1/(R)SE
Bezeichnung:
Datei: 812035 Freie Pressung HMD 1/( RS )E
812035
Seite: 1/1Zeichnungsnummer:
Legende:“ ” Volumenstrom Heizwasser in m3/h∆p freie Pressung (Werkseinstellung)
Freie Pressung HMD 1/( RS )E
812035
∆pmax freie Pressung maximal
Änd./ÄM/Ersteller/Datum
- /PEP 011-2012 / Liska / 07.11.2012
0,0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,0 0,5 1,0 1,5 2,0 2,5 3,0
∆p
(bar
)
∆pmax
∆p
“ ” (m3/h)812027
Legend: “ ” Heating water volume flow in m³/h ∆p Free compression (factory setting) ∆pmax Free compression maximum
7Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
-F1
0-F
11
-F12
A1
A2
-Q14-F
13
A1
A2
1N2
PE
2
1L2
3
Pum
p for mixing circuit 1
1
TB1
bl
No function
Sensor m
ixing circuit 1
1
BU
P
MZ
1/MIS
br
X7:1L1,1N
1,PE
Control signal of add
itional heat generator 1; internally w
ired
Charge/discharge/cooling m
ixer 1 close
d
Hot w
ater circulating pum
p/switching valve
External sensor
EV
U
MO
T
FP
1
ZW
1
X0-X
4
Motor protection
Heating circuit circulating pum
p
Cut out com
pressor
3
TR
L
Term
inal in hydraulic m
odule; p
ower supply additional heating
RFV
PE
X
Term
inals
TB
1
External return sensor
HU
P
L1
MA
1/MIS
Term
inal strips on controller board (see sticker)
-X4
circulation pump
ZW
2/SS
T
Accessories: R
emote control
TB
W
A4
Term
inal in hydraulic m
odule fo
r compressor output
Energy supplier contact; close
d on release; bridge if no blocking inte
rval
TAX10
A2
ZU
P
Term
inal strip in hydraulic m
odule switch box; N
/PE
distribution for external 230V devices
Auxiliary circulation pum
p
RF
V
X7:L1,N
,PE
Control signal of add
itional heat generator 2
N
ZU
P
External unit
HU
P
Control e
lement
TB1
3
MOT
LIN
Hot w
ater gauge/therm
ostat
L1
X7
A3
PE
ZIP
M
-X
A4
L1
TA
GND
L1
X10
Charge/discharge/cooling m
ixer 1 open
TBW
N
EVU
Hot w
ater or buffer storage tank
BU
P
HUP
N
1~N/PE/230V/50Hz
2
Nam
e
ZIP
1~N/PE/230V/50Hz
3
ZW2/SST
GND
X7
A1
TA GND
Du
al a
ir-wa
ter
Information
on fuses can be found in the technical data
3
ZW1
M
BUP
MZ1
MIS
EV
U
4
L
1
1L3
1N3
PE
ZW
2
2
PE
F13
Function
1L1
FP
1
LINcon
nection con
trol unit --> external unit
TBW
ZIP
X7
1~N/PE/230V/50Hz
3A
5
-X0
Cut out a
uxiliary heating 2
UK
83
1176b
ZW
2
MA1
Cut out a
uxiliary heating 1
Q14
Leg
en
d:
Cut out controller unit
Contactor ele
ctric heating ele
ment hot w
ater or buffer tank
PE
L
F11
F10
Sub-distribution unit intern
al installation
A2
GND
RFV
PE
Controller board; A
ttention: I-max =
6A
/230VA
C
F12
2
GND
X10
A5
-X3
A1
1N1
-X1
0
ZUP
-X7
-X2
A3
VBO
TRL
PEX
GND
ASD
FP1
1~N/PE/230V/50Hz
Term
inal diagram LW
D 230V
831176
Achim
Pfleg
er2
5.05.2
011
bÄ
M 045/2013
12
34
56
78
910
1112
1314
1516
12
34
56
78
910
1112
1314
1516 1
/1
1
23.0
7.2
013
ÄM
034/2011
10X
607 - 10X
608
;
aA
chim P
fleger
10X603 - 1
0X6
04;
Blatt-N
r.
Zusta
ndÄ
nde
rung
Bea
rb.
Datu
mN
ame
Bl vo
n An
z
Datu
m
HMD 1/(R)SE Terminal diagram
8 Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
1L1
-X7
1L2
1L3
21
-Q5
/2.8
1N1
-X7
43
53
1
64
2
-E22
ZW
1
1N265
1N3
PE
L1
-X7
NP
E
LN
PE
1-X
02
12
3P
E
34
E22
Operating m
aterials
X7
UK
81
7383c
Control e
lement
1L1,1L2,1L3,1N
1,1N
2,1N3,P
E; P
ower supply A
ux. heating
1~N
/PE
/230V/50H
z
Contactor for auxiliary heating
K11
ZW
1X
7
Q5
Auxiliary heating
Leg
en
d:
1~N
/PE
/230V/50H
z
Function
-K11
Unit co
nnection
1
X7
Cable
PE
2
LIN
12V/LIN
/GN
DX
7
1~N
/PE
/230V/50H
zL1,N
,PE
; Pow
er supply com
pressor;
LIN
1~N
/PE
/230V/50H
z
Pow
er supply, compressor output -->
exte
rnal unitLIN
bus
Hydraulic m
odule HM
D 230V
817383
Achim
Pfleg
er2
5.08.2
011
cÄ
M 045/2013
12
34
56
78
910
1112
1314
1516
12
34
56
78
910
1112
1314
1516 1
/2
1
24.0
7.2
013
PE
P 011/2012
150
712;
bA
chim P
fleger
150708;
Blatt-N
r.
Zusta
ndÄ
nde
rung
Bea
rb.
Datu
mN
ame
Bl vo
n An
z
Datu
m
Circuit diagram 1/2 HMD 1/(R)SE
9Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
PE
NL
L-X
0
L
-X1
0
NN
PE
PE
L-X
0L
L
MOT
-X2
EVU
-X2
ASD
-X2
12
-F6
HUP
-X3
M1
LN
PE
-M4
HU
P
M1
brbl
PE
brblbk
-M5
HU
P
ZW1
-X3
ϑ
-ST
B
A1
A2
-Q5
ZW
1
0-10V12
GN
D12
ϑ
TVL
-X5
-R5
TV
L
GND
ϑ
TRL
-X5
-R4
TR
L
GND
0-1
0V8
GN
D8
AO2
-X6
GND
21
/1.34
3/1.4
65
/1.4
X10
X10
AS
D
ZW
1
-K12
Leg
en
d:
1~N
/PE
/230V/50H
z
EV
U
Return sensor
Supply term
inals in switchbox of hydraulic m
odule; N
/PE
distribution for external 230V units
R4
ST
B
Contactor for auxiliary heating
M4
2
K10
Flow
sensor;
Function
Safety tem
perature limiter, ad
ditional heating
F6
TR
L
Energy supplier contact; close
d on release; bridge if no blocking inte
rval
HU
P
br
C
bl1~N
/PE
/230V/50H
z
EV
U
1
HU
PH
eating pump energy efficiency; installed in E
nergy E
fficiency option
M5
K12
Com
fort plate; installed in Energy E
fficiency option
Flow
sensor
Operating m
aterials
Q5
1
Controller supply
R5
-K10
Heating pum
p; not required in the En
ergy Efficiency option
TV
L
23
0V
AC
UK
81
7383c
Controller board; A
ttention: I-max =
6A
/230VA
C
Hydraulic m
odule HM
D 230V
817383
Achim
Pfleg
er2
5.08.2
011
cÄ
M 045/2013
12
34
56
78
910
1112
1314
1516
12
34
56
78
910
1112
1314
1516 2
/2
2
24.0
7.2
013
PE
P 011/2012
150
712;
bA
chim P
fleger
150708;
Blatt-N
r.
Zusta
ndÄ
nde
rung
Bea
rb.
Datu
mN
ame
Bl vo
n An
z
Datu
m
HMD 1/(R)SE Circuit diagram 2/2
10 Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
11Subject to change without notice | 83062600eUK – Translation into English of the original German operating manual | ait-deutschland GmbH
ait-deutschland GmbHIndustriestraße 3D-95359 Kasendorf
E [email protected] www.alpha-innotec.de
alpha innotec – an ait-deutschland GmbH brand
UK