Development of a unified design buckling curve for fibre reinforced polymer plates subjected to in-plane uniaxial and uniform compression Downloaded from: https://research.chalmers.se, 2023-06-14 06:11 UTC Citation for the original published paper (version of record): Olsson, E., Mottram, J., al-Emrani, M. et al (2023). Development of a unified design buckling curve for fibre reinforced polymer plates subjected to in-plane uniaxial and uniform compression. Thin-Walled Structures, 183. http://dx.doi.org/10.1016/j.tws.2022.110346 N.B. When citing this work, cite the original published paper. research.chalmers.se offers the possibility of retrieving research publications produced at Chalmers University of Technology. It covers all kind of research output: articles, dissertations, conference papers, reports etc. since 2004. research.chalmers.se is administrated and maintained by Chalmers Library (article starts on next page)
Development of a unified design buckling curve for fibre reinforced polymer plates subjected to in-plane uniaxial and uniform compression
Jun 14, 2023
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Related Documents
![Investigation on Simulation of Buckling of Aluminium Sheet ......The simulation of buckling geometry according [8] under an uniaxial tension load with the material properties of an](https://static.cupdf.com/doc/110x72/60ed22dd6dffd264b06ed3b7/investigation-on-simulation-of-buckling-of-aluminium-sheet-the-simulation.jpg)
