Frac Heads Wellhead Isolation Specialists Description: Stinger Wellhead Protection’s frac heads are designed to replace the existing lower pressured production wellheads with higher rated multi valve wellheads during fracturing treatments. Specifications: Stinger offers two types of assemblies: the Special Pin Assembly and the Screw-on Assembly. Available in full bore: 77.8 mm (3 1/16 in.) x 69 MPa (10,000 psi) or 103.5 MPa (15,000 psi) working pressure. 103.5 mm (4 1/16 in.) x 69 MPa (10,000 psi) or 103.5 MPa (15,000 psi) working pressure. Special Pin Assembly The special pin assembly adapts to both flush mount or extended neck tubing hangers. The bonnet incorporates a positive sealing system. The seals are energized and pressure tested to 69 MPa (10,000 psi) prior to the frac treatment. Running a back pressure valve or a tubing plug allows the special pin assembly to be safely installed and removed by a Stinger crane unit without the assistance of a service rig. Screw-On Assembly Screws directly on tubing after packer is set in tension. Can be flanged on to BOPs or tubing spool for multiple zone access. Available in various pipe connections (EUE, VAM, and Hydril). AN OIL STATES INTERNATIONAL WELLSITE SERVICES COMPANY WELLHEAD PROTECTION (CANADA) INC.