Top Banner
Designing and producing superior drilling products
4

Designing and producing superior drilling products · drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled

Mar 29, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Designing and producing superior drilling products · drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled

Designing andproducing superiordrilling products

Page 2: Designing and producing superior drilling products · drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled

The Nitro Ant footclamps are a unique concept that utilize nitrogen compressed gas springs to achieve a high powered, self centralizing & compact foot clamp for diamond drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled as well as 90 degree drilling, no need to rely on rod weight as a fail safe to secure rods down the hole. The nitrogen spring can be set to a variant of pressures to the desire of the end user, giving flexibility in axial holding capacity up to 15 ton and with the Nitro Ant changing to the next rod size is quick and as simple as removing four pins, changing spacers and back to drilling again, saving on down time.

CLAMPING RANGE - 39-118MM (1.5” - 4.6”)

WEIGHT - 88 KG’S (194 LBS)

WORKING PRESSURE - 258 BAR (3750 PSI)

MAX FLOW - 35 L/M (9 GPM)DIMENSIONS -

61CM X 23CM X 33CM(24” X 9” X 13”)

Page 3: Designing and producing superior drilling products · drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled

FOOT CLAMPS

These foot clamps are available with a rotation option so they can be utilized as a breakout tool as well as drill rod clamp. Various sizing is available to suit most rigs, although if required CE can adjust designs to fit to your rig.

The foot clamp are driven by hydraulic cylinder to create the initial clamp, once engaged the angled inserts slips take over keep the force constant as the deadweight of the drill string

holds itself in place. Giving peach of mind the clamps will hold the string through the force of gravity.

If clamps for underground drilling is required, please consider our Nitro Ant foot clamps.

4 inch opening Part No. M3647-62

Rotation - 28 degreesTorque - 12,000 ft/lbs

Clamp range - AQ - NW

8 inch opening Part No. M3232-62

Rotation - 28 degreesTorque - 15,000 ft/lbs

Clamp range - NQ - PWT

Page 4: Designing and producing superior drilling products · drilling applications. Being that the clamping is powered by hydraulic & nitrogen springs the Nitro Ant is perfect for angled

Phone - 1300 790 925Phone international - +61 89409 7744

Email - [email protected]