2. SELECT TECHNOLOGY - decide how access should be granted. 1. SELECT WORKING MODE RFID BLUETOOTH + access control is based on IDs, tags-lanyards or application in smartphone: just shake your smartphone to open door RFID UHF DESIGN YOUR ACCESS CONTROL WITH SMART RFID IDs or innovative tags-lanyards are needed for access RFID GSM + access is granted with IDs, tags-lanyards or after dialing special number RFID GSM + + BLUETOOTH all methods for granting access are available ONLY INDIVIDUALLY DESIGNED ACCESS CONTROL DESERVERS YOUR ATTENTION. It should consider your needs and the characteristic of place where it would be implemented. Otherwise such access control will fail to meet your expectations and can turn into expensive yet failed investment. Smart Technology Group experts created this guide to help you to shape your own access control. You need just few minutes to choose optimal solution. After this, simply contact Smart Technology Group to make order and schedule access control assembly and its calibration. AUTONOMOUS MODE (AM): choose it when you need a simple access control with no computer nor control software. Access is granted by RFID UHF reader after receiving signal from tag. Technologies used in this working mode: and RFID UHF GSM. SYSTEM MODE (SM): in this mode, access is granted with the use of database. Control software verifies for every time access. In this mode, you can use and RFID UHF, GSM Bluetooth. www.smart-tg.com AM SM AM SM SM SM