NECKLACE DESIGN PROJECT “SPARKLING WOOD”
NECKLACE DESIGN PROJECT
“SPARKLING WOOD”
2 /6CREATE-YOUR-STYLE.COM
Step 1
Supplies & Tools
Article Product Group Article No. Amount Size Color Color Code
Fancy Stones 4706 1 pc. 17 mm Crystal 001
Fancy Stones 4706 1 pc. 17 mm Light Colorado Topaz F 246
Fancy Stones 4706 1 pc. 17 mm Crystal Blue Shade 001 BLSH
Fancy Stones 4706 1 pc. 24 mm Crystal 001
Settings 4706/S H20 1 P Z 3 pcs. 17 mm Gold
Settings 4706/S H20 1 P Z 1 pc. 24 mm Gold
Beads 5000 1 pc. 8 mm Crystal 001
Swarovski crystals
Supplies2x Crimping beads, goldExtension chain, 6 cm, gold3x Head pins, gold1x Lobster clasp, gold2x Jump rings, 5 mm, gold2x Jump rings, 8 mm, gold2x Split rings, goldTiger tail, 140 cm, goldTwo part adhesive glue4x Wooden balls, 10 mm, white18x Wooden balls, 16 mm, white5x Wooden balls, 24 mm, white
ToolsCrimping pliersFlat nose pliersRound nose pliersRulerSide cutterToothpickTweezers
Level of design: BEGINNERSHave also a look at the text instructions at the last page!
STEP 1
Stringing
DESIGN PROJECT NECKLACE “SPARKLING WOOD”
3 /6CREATE-YOUR-STYLE.COM
tep 2 Repeat step 1:
Repeat
Glue
STEP 2
4 /6CREATE-YOUR-STYLE.COM
Step 4
Step 3
90 cm45 cm
STEP 3
STEP 4
3
1 2 3
1/21/2
3
5 /6CREATE-YOUR-STYLE.COM
1/2
3/4
1/2
1/2
1 2
3 4
6 /6CREATE-YOUR-STYLE.COM
STEP 1: Connect 3 Swarovski Fancy Stone Settings art. 4706/S H20 1 P Z 17mm gold using head pins as shown in our illustration.The red marked dots are the ones through which the head pin will be inserted and the blue ones are the ones that stay idle at this point. Turn a loop at the end of the headpin and wind the end around the headpin twice. Position the piece as shown inthe illustration.
STEP 2: Connect the Swarovski Fancy Stone Settings art. 4706/S H20 1 P Z 24 mm gold to the settings created in step 1 using a headpin and the red marked holes of the settings. Turn a loop in the headpin as done in step 1. Carefully insert all the Swarovski Fancy Stones into the proper settings and close the prongs with tweezers.
STEP 3: Cut a 90 and 45 cm long piece of tiger tail. Thread the 90 cm piece through the right end of the headpin loop center the tiger
tail in the loop. Insert the wooden beads onto the doubled strand of tiger tail. Insert the tiger tail through a crimping bead, keep one of the ends longer and go through a split ring and back through crimping bead and one of the wooden beads. Pull the tiger tail tight, crimp the crimping bead and cut off the extra tiger tail. Repeat the same process at the other end using the 45 cm tiger tail.
STEP 4: Insert Swarovski Bead art. 5000 8 mm Crystal onto the head pin and turn a loop at the end. Attach a lobster clasp to one of the split rings using a 5 mm jump ring and an extension chain to the other split ring using a 5 and 8 mm jump ring. Connect the head pin with Swarovski Bead to the end of the extension chain by opening the loop.
DESIGN PROJECT NECKLACE “SPARKLING WOOD”