Design-grating Hydra Linearis Hydra Linearis design-grating • Material: 304 or 316 stainless steel Hydra Linearis design-grating | made of stainless steel Custom lengths and widths available on request Item for inflow width mm (in) Height mm (in) Bar thickness mm (in) Inlet area per unit length mm 2 /m (in 2 /ft) S1000 123 (4.84) 20 (0.79) 7 x 7 (0.28x0.28) 502 (0.24) Every reasonable effort has been taken to ensure the accuracy of this document. However we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions. 998 123 20 Toll Free: 877-385-5130 www.northstarindustries.ca • Suitable for Richard Brink stainless steel drainage channel systems and Northstar Industries‘ S1000’s polymer concrete drainage channels with built-in stainless steel edge rails. • Grating locks available • Custom gratings varying in size, dimension and load class as per project engineer’s requirements. • Grating for cross drainage: slots widths from 7.7 mm to 13 mm, and lengths up to 40 mm as per ADA (American Disabilities Act.)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Design-grating Hydra Linearis
Hydra Linearis design-grating • Material: 304 or 316 stainless steel
Hydra Linearis design-grating | made of stainless steel Custom lengths and widths available on request
Every reasonable e�ort has been taken to ensure the accuracy of this document. However we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions.
F
E
D
C
B
A
1 2 3 4 5 6 7 8
Bauteilzeichnung :
Richard Brink GmbH & Co. KG
Görlitzer Straße 1D-33758 Schloß Holte-Stukenbrock
Erstellt durch : Geprüft von : Datum Ersterstellung :
letzte Änderung durch: letzte Änderung Geprüft von : Datum letzte Änderung :
Maßstab : Adressnummer : Gewicht :
28.06.2018
http://insight/kon/rel/PrBK/A612144.dft
28.06.2018
0,000 kg
heinrich.henke
heinrich.henke
heinrich.henke
1 / 1
DRR L 160-20 7x7 VADränagerinne
Zusammenbauzeichnung de
Kunde :
Richard Brink GmbH AD029704
Projektname / Kommission :
heinrich.henke
A612144Artikelnummer :
Die
ses D
okum
ent d
arf o
hne
unse
re sc
hrift
l. G
eneh
mig
ung
wed
er v
ervi
elfä
ltigt
, noc
h dr
itten
Per
sone
n zu
irg
endw
elch
en Z
wec
ken
zugä
nglic
h ge
mac
ht, n
och
zu a
nde
ren
Zwec
ken
benu
tzt w
erde
n, a
ls w
ie e
s de
m E
mpf
änge
r anv
ertr
aut i
st !
998 123
Information der Baugruppe : DRR L 160-20 7x7 VANr. Titel Art.-Nr.: Material Blechdicke : Gewicht Firma Projektname / Kom. AdressNr.: Zuletzt bearbeitet von Dateiname :
1 DRR L x-20 7x7 Seitenteil VA A612502 1.4301 VA 1,50 mm 0,960 kg Richard Brink GmbH Dränagerinne AD029704 heinrich.henke A612502.psm
2 DRR L 160-20 7x7 Tragstab VA A201577 1.4301 VA 2,00 mm 0,278 kg Richard Brink GmbH Dränagerinne AD029704 heinrich.henke A201577.psm
3
4
Stückliste der Baugruppe : A612144Titel : DRR L 160-20 7x7 VA
Nr. Titel Stk Art.-Nr.:
1 DRR L x-20 7x7 Seitenteil VA 2 A612502
2 DRR L 160-20 7x7 Tragstab VA 8 A201577
3 DRR L RV 160-20 7x7 Tragstab VA 2 A201574
4 DRR L 7x7 Stab VA (L=1000mm) 9 A611504
20
Toll Free: 877-385-5130www.northstarindustries.ca
• Suitable for Richard Brink stainless steel drainage channel systems and Northstar Industries‘ S1000’s polymer concrete drainage channels with built-in stainless steel edge rails.
• Grating locks available• Custom gratings varying in size, dimension and load class as per
project engineer’s requirements.• Grating for cross drainage: slots widths from 7.7 mm to 13 mm, and
lengths up to 40 mm as per ADA (American Disabilities Act.)