Page 1
Department of Veterans Affairs
Records Management Center (RMC)
Extraction and Scanning Services
Training Manual /
Electronic User’s Manual
T4NG - Records Management Center Extraction and Scanning Services
Prime Contract: VA118-16-D-1016
Task Order: VA11817F10160005
CLIN 0003AC / 0003AD
Submitted by
SRA International, Inc., a General Dynamics Information Technology company
15036 Conference Center Drive
Chantilly, VA 20151
Phone: (703) 803-1500 | Fax: (703) 803-1509 | Website: www.gdit.com
December 5, 2018
Document Control Number: VA11817F1016-0005-TMEUM-0003AC-0003AD-004
Version: 3.0
Page 2
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 i VA118171016-0005-TMEUM-0003AC-0003AD-004
DOCUMENT CHANGE HISTORY
The following table summarizes the document change history for the Training Manual/Electronic User’s
Manual.
Version Date Description Author
1.0 November 14, 2017 Initial submission SRA International, Inc.
2.0 February 23, 2018 Updated to reflect system changes SRA International, Inc.
2.1 June 1, 2018 Updated to reflect system changes General Dynamics
Information Technology
2.2 October, 11, 2018 Updated to show changes to File
Request feature
General Dynamics
Information Technology
3.0 December 5, 2018 Updated to show Rescan Request
process
General Dynamics
Information Technology
Page 3
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 ii VA118171016-0005-TMEUM-0003AC-0003AD-004
TABLE OF CONTENTS
1. INTRODUCTION _______________________________________________________________ 1
1.1 Training Outline ____________________________________________________________ 1 1.2 Training Scope _____________________________________________________________ 1 1.3 Training Audience Needs _____________________________________________________ 1
2. SMTS SCREEN TRAINING ______________________________________________________ 1
2.1 RMC ESS Portal Login Screen _________________________________________________ 2 2.2 RMC ESS File Requests Drop-down ____________________________________________ 2 2.3 File Search ________________________________________________________________ 3 2.4 File Request _______________________________________________________________ 7 2.5 Rescan Requests ___________________________________________________________ 11
2.5.1 Making a Rescan Request _______________________________________________ 13 2.5.2 VCIP Review of Rescan Requests _________________________________________ 14 2.5.3 GDIT Rescanning Team ________________________________________________ 17
2.6 Requested File Status _______________________________________________________ 18 2.7 Dashboard ________________________________________________________________ 21 2.8 Help ____________________________________________________________________ 22
LIST OF FIGURES
Figure 1: VA Records Management Center (RMC) Source Material Tracking System Login Screen ___ 2 Figure 2: Login Method Close up View ___________________________________________________ 2 Figure 3: File Request Drop Down _______________________________________________________ 3 Figure 4: File Search Page _____________________________________________________________ 4 Figure 5: File not Found! Message _______________________________________________________ 4 Figure 6: File Search Results ___________________________________________________________ 5 Figure 7: Detailed Information on File ____________________________________________________ 6 Figure 8: File Request Page with Completed Fields __________________________________________ 7 Figure 9: File Already Requested Warning Message _________________________________________ 8 Figure 10: File Request Page showing Status of already-requested file ___________________________ 8 Figure 11: Success Message Indicating Request Created ______________________________________ 9 Figure 12: New File Request Created _____________________________________________________ 9 Figure 13: Urgent Reason Field _________________________________________________________ 9 Figure 14: Completed File Request Form – Urgent Request __________________________________ 10 Figure 15: Warning Message __________________________________________________________ 10 Figure 16: File Request Status _________________________________________________________ 11 Figure 17: Rescan Request Workflow ___________________________________________________ 12 Figure 18: Add Rescan Request Page ____________________________________________________ 13 Figure 19: Manage Rescan Requests Page ________________________________________________ 14 Figure 20: Manage Rescan Requests Page ________________________________________________ 15 Figure 21: Edit Rescan Request Page ____________________________________________________ 16 Figure 22: Manage Rescan Requests Page ________________________________________________ 17 Figure 23: Edit Rescan Request Page (top portion only) _____________________________________ 18 Figure 24: Requested File Status _______________________________________________________ 19 Figure 25: Requested File Status Page showing All Requests _________________________________ 20 Figure 26: Expanded File Request Information ____________________________________________ 20 Figure 27: Exported File ______________________________________________________________ 20 Figure 28: Dashboard (Top) ___________________________________________________________ 21
Page 4
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 iii VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 29: Dashboard (Bottom) ________________________________________________________ 21 Figure 30: Expanded Section of Dashboard _______________________________________________ 22 Figure 31: Help Menu ________________________________________________________________ 22
Page 5
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 1 VA118171016-0005-TMEUM-0003AC-0003AD-004
1. INTRODUCTION
The Training Manual/Electronic User’s Manual documents the process by which a Department of
Veterans Affairs (VA) user can use the Source Material Tracking System (SMTS) to request a Veteran’s
C (Claims) or STR (Service Treatment Record) file. Claims files may also be designated as CXC.
The SMTS software supports the Records Management Center Extraction and Scanning Services (RMC
ESS) project. This software functionality is part of a larger VA effort to accomplish the goal of creating
an electronic end-to-end processing environment at the Veterans Benefits Administration (VBA). To
achieve this vision, VBA must first extract all non-operational records stored at its RMC facility in St.
Louis and convert them to digital files for access through VBA software systems. The extraction process
includes the following steps:
1. The RMC ESS team extracts C files and STRs from RMC.
2. RMC ESS transfers the source materials to a processing facility to be held until they can
be scanned.
3. RMC ESS then transfers source materials to the scanning facility in which they are
prepped, scanned, indexed and uploaded to the Veterans Benefits Management System
(VBMS) database.
4. Source materials are then de-prepped/disassembled and held for 60 days prior to transfer
to long-term storage facility storage.
5. Source materials are shipped to long-term storage.
1.1 Training Outline
The training outline follows the table of contents.
1.2 Training Scope
This training covers preparing VA personnel to utilize SMTS to request a Veteran’s file that is currently
located either at the processing facility, the scanning facility or in route between these facilities. Once
scanned, the files can be accessed electronically via the VBMS database.
1.3 Training Audience Needs
The primary target audience for this training is any VA employee that needs to access a Veteran’s file.
The needs for these potential system users include:
Determine if the file is located at the RMC location or if it the contractor has extracted the file for
transport to a digital scanning facility or if the file has already passed through the digital scanner
and is now available online.
Check the status on a prior file request.
2. SMTS SCREEN TRAINING
This section includes training on each of the SMTS software screens you can use to search for a file,
request a found file and to check on the status of a request.
Page 6
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 2 VA118171016-0005-TMEUM-0003AC-0003AD-004
2.1 RMC ESS Portal Login Screen
Access the system at: https://rmc.csra.com/ro.
The VA Records Management Center (RMC) Source Material Tracking System Login window (Figure 1)
contains an RMC logo in the upper left of the screen and the logo of CSRA on the right side at the top.
Figure 1: VA Records Management Center (RMC) Source Material Tracking System Login Screen
Figure 2 provides close up view of the login page featuring the login method. In the Login Method
section, you see the following login prompt: Submit File/Record Search Request (Requires PIV
Card). To log into SMTS, select the Select button.
Figure 2: Login Method Close up View
Below the Login Method section of the VA RMC SMTS Login page is information to contact support
([email protected] ) and a warning indicating that SMTS is a U.S. Government information system
and should only be used for authorized purposes.
2.2 RMC ESS File Requests Drop-down
Once the login process is complete, the File Search is rendered with a navigation bar at the top which
shows the name of the software at the left followed by two drop-down menus: Requests and Help. The
Page 7
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 3 VA118171016-0005-TMEUM-0003AC-0003AD-004
user name appears at the far right of the bar following the words Signed in as. The arrow next to your user
name provides access to the log off functionality.
Selecting the Requests menu displays a drop-down menu (Figure 3).
Figure 3: File Request Drop Down
The following functions are available from the Requests menu:
1. File Search: This allows the user to search to see where a file exists in the system. If the file is
found, then this allows the user to make a new file request or, if the file has already been
requested, the user can see information on the file’s current status.
Note: Requests cannot be made for Files that are returned as ‘Not Found’ or ‘Uploaded’.
2. Requested File Status: This allows the user to see details on a requested file’s status.
3. Dashboard: This allows a user to see summary file status information.
4. Manage Rescan Requests: This allows the user to view the status of existing rescan requests.
5. Add Rescan Requests: This allows the user to add new rescan requests.
2.3 File Search
In Figure 8, the File Search page screen contains a File Search field with instructional text to Enter File#
or DCSID or Box# or RMN. To the right of the field is a File Search icon ( ) – once you have entered
data into the field, this icon becomes active and can be clicked to generate search results. Below File
Search field, the heading Search Result indicate the area in which the system will display the file search
results.
Note: DCSID is Document Control Sheet identification; RMN is Records Management Number.
Page 8
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 4 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 4: File Search Page
Searches require the full number – SMTS does not accept wildcards for searches. Once you enter the
entire number, you can either select the Enter key or click on the File Search icon ( ). If there are no
search results, the system returns a File not found! Message (Figure 5).
Figure 5: File not Found! Message
If SMTS finds results from the search, the system displays the results as shown in Figure 6, which shows
the beginning of the results for Box# C17776666. Searches by Box# or RMN will return all files
associated with that Box or RMN. File# and DCSID searches will show only the one file.
Page 9
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 5 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 6: File Search Results
At the top of the search results, the Box Summary Information provides a quick reference of the overall
box status for the located file, this detailed information for the selected box includes the following:
Box#
RMN#
Totals of Files
Totals of DCS IDs and Statuses
Box information
CtoP Type
Box Timeline Information
SMTS shows the progress of the file status using green circles with checkmarks ( ). These circles, if
clicked, will result in the user being returned to the blank File Search page.
Page 10
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 6 VA118171016-0005-TMEUM-0003AC-0003AD-004
In this case, the file is currently at the Processed stage, as shown by the lack of checkmarks after that
stage as well as the Box Status showing Processed in VBMS text at the end of the file record.
Figure 7 shows the detailed information for a particular file. Some of the information displayed includes
the following:
Volume(s)
File Type (STR, Claim File)
STR Label (if any)
Box Number
DCS ID
RMN
Location of box/file
Box Status
Dates for Shipping
Turnaround Times (TATs) in days
File Status Description
Figure 7: Detailed Information on File
Even though a file has been requested, this does not mean it will necessarily be processed for scanning
immediately. It may sit in storage at the scanning facility with a large batch of files awaiting final
processing. So if the file is urgently required, it can still be expedited for immedate processing. Selecting
Page 11
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 7 VA118171016-0005-TMEUM-0003AC-0003AD-004
the Submit Scanning Request box to the right of the File Number in the search results will take you
directly to the File Request function (covered in Section 2.4).
2.4 File Request
The File Request function allows a user to request that an unprocessed file be shipped or that a file
already in transit be expedited so that it reaches the scanning facility and is available digitally sooner than
would be the case if it was processed in the normal course of scanning.
The File Request feature is only available after the user searches for a file via File Search and the file is
found. If the file returns from Files Search as ‘Not Found’ or ‘Uploaded’, then the user will not be able to
request the file. The File Request feature is initiated from the File Search function by clicking the Submit
Scanning Request button for a file returned in the search results. In this instance, the File Number is
automatically populated with the file number from the search results. NOTE: The File Number is
uneditable from this page.
You can select two types of request:
Pending Claim: This type of request will be processed in 48 hours
Urgent: This type of request will be processed in 24 hours.
Figure 8 shows the fields completed with a file number entered and Pending Claim selected.
Figure 8: File Request Page with Completed Fields
Once you have entered the required fields, you can select the Search button.
If the file has already been requested, the Warning message appears indicating that the request already
exists in the system (Figure 9). The warning is indicated by an exclamation point within a circle and the
word WARNING beneath it.
Page 12
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 8 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 9: File Already Requested Warning Message
Close the Warning Message by selecting the OK button. The File Request screen appears displaying a
screen explaining the status of the file (Figure 10).
Figure 10: File Request Page showing Status of already-requested file
Figure 10 shows that the requested file already exists in the system, which means that it has already been
removed from the original RMC facility. The File Search Request section displays the file status in a table
with the following information:
The file status (in this case, Processed in VBMS)
Box # in which the file is located
Type of file
DCSID #, if any
RMN #, if any
Comments (additional information on the requested file)
Page 13
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 9 VA118171016-0005-TMEUM-0003AC-0003AD-004
If the file you are requesting has not previously been requested, the Success message appears indicating
that the file was not previously requested but you have now created a request in the system (Figure 11).
Figure 11: Success Message Indicating Request Created
Select the OK button. The File Request screen appears with the current status (Figure 12).
Figure 12: New File Request Created
In this example, the green box beneath the blue Search button indicates that the request for the specified
file number has been created successfully. If a file has been requested as a pending claim and you want to
change it to urgent, or if you want to make any request urgent, select Urgent in the Request Type field.
An additional required field, Urgent Reason, appears (Figure 13).
Figure 13: Urgent Reason Field
Page 14
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 10 VA118171016-0005-TMEUM-0003AC-0003AD-004
The Urgent Reason drop-down field lists the following reasons to justify the urgency of the request:
Congressional Inquiry/Special Interest
Former Prisoner of War
Hardship
Homelessness
NCA Request
Nehmer
Suicidal
Terminal Illness
A completed urgent request form appears in (Figure 14), with Congressional Inquiry/Special Interest
selected.
Figure 14: Completed File Request Form – Urgent Request
Once you select the Search button, if the request exists in the system a Warning message appears (Figure
15) indicating that the request has been changed from Pending Claim to Urgent. Although another user
may have requested this file, the Urgent request takes precedence. The Urgent request will expedite the
file request and make it available in 24 hours rather than 48, and the file status can now be tracked by all
users who have made requests.
Figure 15: Warning Message
Page 15
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 11 VA118171016-0005-TMEUM-0003AC-0003AD-004
Once you select the OK button, the file status appears (Figure 16).
Figure 16: File Request Status
This shows that the file has been successfully requested. Since a DCSID number already exists, the digital
file can be accessed within the VBMS system.
2.5 Rescan Requests
The Rescan function enables end users (ROs) the ability to enter a rescan request in SMTS. Rescan
requests must include a valid Document Control Sheet (DCS) Identification Number. SMTS allows users
to search for the DCS ID.
RO users, upon viewing uploaded files in VBMS, maybe determine that the files need to be rescanned.
Some reasons include the desire to have a color version, something missing from the file, or poor
legibility. SMTS allows the RO users to request a rescan. Each request then goes to the Veterans Claim
Intake Program (VCIP) for review. VCIP members will Approve, Deny, or Request Clarification for
rescan requests. Request for clarification will go to the RO for additional clarification. If the rescan
request is approved, GDIT personnel will process the file for rescanning. Once the rescanned file has been
uploaded into VBMS, the Rescan request will be closed.
SMTS provides email notification for status changes throughout this process. SMTS allows RO users to
view the status of their own rescan requests. VCIP and GDIT users can run reports on all rescan requests.
Page 16
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 12 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 17 provides an overview of the Rescan Request workflow. SMTS generates an email notifications
for changes in status affecting the RO user.
Figure 17: Rescan Request Workflow
Rescan Request Workflow
VC
IPR
egio
nal O
ffic
eG
DIT
Tea
m
RO user identifies need for Rescan in
VBMS
Create Rescan Request in SMTS
Review Request
Close the Request (once uploaded to
VBMS)
Work Rescan Request
Receive Rescan Result in VBMS
RequestClarification
Approved
Notify RO of Rescan Request Completion
Provide Clarification
DenyEndProvide Additional
Information if Requested
Request Information/Receive Information
Page 17
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 13 VA118171016-0005-TMEUM-0003AC-0003AD-004
2.5.1 Making a Rescan Request
Once you determine you need a file rescanned, log into SMTS. From the Requests menu, select Add
Rescan Requests. The Add Rescan Request page appears (Figure 18).
Figure 18: Add Rescan Request Page
Enter the DCS ID for the file you want rescanned in the DCS ID field, then click Search. The system will
automatically populate the RMN, First Name, Last Name, File Number, and Processing Facility fields
with the data associated with the DCS ID. These fields are not editable.
The Date Reported field automatically populates with the current date.
Use the drop down list in the Scanning Issue field to select the reason you need the rescan. This field is
required. You can choose from one of the following reasons:
Alt Media not Scanned
CD not Scanned
Missing Claim Files
Missing DCS
Missing Document(s)
Missing STR
Poor Quality
By default the Priority? of the request is Regular; you can change it to High.
By default the Color? is No; you can change it to Yes.
Page 18
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 14 VA118171016-0005-TMEUM-0003AC-0003AD-004
Add clarifying information in the Additional Information field. If you selected High for priority or Yes
for color, it is particularly helpful to explain the need for urgency or color in this field.
Click Add. A message indicating success briefly appears followed by the Manage Rescan Requests page
with your new request added (Figure 19). On this page you can view all requests you have submitted.
Figure 19: Manage Rescan Requests Page
This page allows you to view all your requests, along with the priority and status. You can export a list
using the Export or Export All button. SMTS also sends emails at each stage of the process so you can
keep track of your request.
Once you have submitted your request, SMTS transmits it to VCIP for review and decision. SMTS sends
an email notifying you of pertinent changes in status.
If the VCIP review indicates a need for clarification, you will receive an email. When you return to SMTS
to view your rescan request, click the Edit button from the Manage Rescan Requests page. In the Edit
Rescan Request page, type your response in the Additional Information field, then click the Clarification
Completed button. The status changes to Clarification Completed and a notice is sent to VCIP for
additional review.
2.5.2 VCIP Review of Rescan Requests
In order to review and process rescan requests, login to SMTS. From the Requests menu, select Manage
Rescan Requests. The Manage Rescan Request page appears (Figure 20).
As a VCIP user, you can view all submitted rescan requests. You can click on the icon to view details
of a request without opening it. You can filter the requests by status by selecting a status from the Rescan
Request Status drop-down list. Your choices are:
Pending (this includes all but Approved, Denied, and Closed)
Created
Closed
Page 19
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 15 VA118171016-0005-TMEUM-0003AC-0003AD-004
Approved
In progress
Denied
Request Clarification
Clarification Completed
Request Information
Request Information Completed
All
Figure 20: Manage Rescan Requests Page
Page 20
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 16 VA118171016-0005-TMEUM-0003AC-0003AD-004
Click the Edit button on the row for the request you want to review. The Edit Rescan Request page
appears (Figure 21).
Figure 21: Edit Rescan Request Page
This page provides information on the request, including the submitter and any additional information
provided for the request. From this page you can approve, deny, or request clarification of the request.
Request Clarification: If you want to request additional clarification, type the clarification you
need in the Results field, then click the Request Clarification button. An Update message
appears briefly. The status of the request changes to Request Clarification. The RO requester
will receive an email notifying them that a clarification has been requested. Once they submit a
clarification, the status changes to Clarification Completed and the VCIP receives an email
indicating the status change.
Deny: If you want to deny the rescan request, click the Deny button. The status changes to
Denied and a notification is sent to the RO requester.
Approve: If you approve the request for rescanning, click the Approve button. The status
changes to Approved and a notification is sent to the GDIT scanning team to rescan the file.
Page 21
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 17 VA118171016-0005-TMEUM-0003AC-0003AD-004
2.5.3 GDIT Rescanning Team
Once the VCIP approves a request for rescanning, SMTS notifies the GDIT scanning users. In SMTS,
from the Requests menu, select Manage Rescan Requests. The Manage Rescan Request page appears
(Figure 22).
Figure 22: Manage Rescan Requests Page
You can view all submitted rescan requests. You can click on the icon to view details of a request
without opening it. You can filter the requests by status by selecting a status from the Rescan Request
Status drop-down list.
You will work primarily with requests with the status of Approved and In Progress.
Page 22
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 18 VA118171016-0005-TMEUM-0003AC-0003AD-004
To view and process an Approved request, click the Edit button for that row. The Edit Rescan Request
page appears (Figure 23).
Figure 23: Edit Rescan Request Page (top portion only)
If after reviewing the request you determine you need more information, type the information needed in
the Results field and then click the Request Information button. This changes the status of the request to
Request Information and notifies the VCIP user that you need some kind of clarification. You may need
more information if, for example, the file has been sent to long term storage and you want to make sure
that the VCIP still wants it rescanned.
When you are ready to begin the rescan, click the In Progress button. The status of the request changes to
In Progress.
Once the request has been completely rescanned and uploaded into VBMS, return to the Manage Rescan
Requests page and click the Edit button for the completed request. On the Edit Rescan Request page,
click the Close button. The request status changes to Closed and SMTS sends an email notification to the
RO user. The RO user can now go back into VBMS and review the file or files.
2.6 Requested File Status
You can check on the status of any file requests that you have made using the Requested File Status
function.
Select the Requested File Status from the Requests menu. The File/Record Request List page appears
(Figure 24). By default, it shows any urgent requests you have made in the last two months. If a file has
been requested by multiple users, that file will appear on each user’s Requested File Status page.
Page 23
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 19 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 24: Requested File Status
The page includes the following functionality:
From/To date ranges: The upper right-hand side of the page contains a date range and a Submit button.
By default the date range is two months, but if you have requested many files in that period, you can
narrow the range. Once you change the dates, you need to select the Submit button to change the results.
Pending/Urgent/All drop-down box: Also on the right-hand side of the page, just below the date range
area is a box in which the user can select to view Pending, Urgent, or All files. Although Urgent is
displayed by default, you can select Pending or All to change the view. The system display changes as
soon as you select an option.
Filter: On the left side of the screen above the list, you can narrow the search using the Filter box. Begin
typing in the field and the system begins to display items that match what you type. The filter only applies
to records appearing in the list – if you are viewing only Urgent records, the filter will not find matching
records for Pending files. The search is not case-sensitive.
Requested File Status data: Beneath the Filter, displays the requests matching the criteria selected using
the date range, drop-down box, or filter. Each requested item contains data for the following columns:
File #: the file number
Box #: the number of the box which contains the file
Request Type: indicates whether the file is Pending Claim or Urgent
File Type: indicates the type of file (STR or CXC)
DCSID: the VBMS DCSID file record #
RMN: the VBMS box Record Management #
Status: displays the current location/status for the file
The example above shows three Urgent file requests, two of which are at the warehouse location, and one
of which has been processed in VBMS. Figure 25 shows All files requested and shows two Pending
Claims as well as three Urgent requests.
Page 24
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 20 VA118171016-0005-TMEUM-0003AC-0003AD-004
Figure 25: Requested File Status Page showing All Requests
To see the details for a specific file, you can select the plus sign ( ) or the file number. The file record
expands to show details on the selected file and the plus sign changes to a minus sign ( ) (Figure 26).
You can toggle this view by selecting the minus sign or the file number again.
Figure 26: Expanded File Request Information
In addition to the functions allowing you to change the view of the requested files, SMTS allows you to
export the list. Selecting the Export button. Selecting this button exports the visible list to an Excel
spreadsheet (Figure 27). The export contains information from the expanded view regardless of whether
the files were expanded at the time of the export. For example, the sub_type column in Excel will show
the Urgent Reason for any urgent requests included in the export.
Figure 27: Exported File
Page 25
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 21 VA118171016-0005-TMEUM-0003AC-0003AD-004
2.7 Dashboard
SMTS provides a dashboard that shows the current status for the extraction, warehouse, and scanning
functions. You can view the dashboard by selecting Dashboard from the Requests menu. This provides
only viewing functionality (Figure 28 and Figure 29).
Figure 28: Dashboard (Top)
Figure 29: Dashboard (Bottom)
Page 26
Prime Contract: VA118-16-D-1016
Task Order: VA11817F1016-0005 Training Manual/Electronic User’s Manual
December 5, 2018 22 VA118171016-0005-TMEUM-0003AC-0003AD-004
If you select the plus sign, SMTS displays more details about the files from the RMC (Figure 30).
Figure 30: Expanded Section of Dashboard
2.8 Help
SMTS also has a Help menu (Figure 31). If you select User Manual from the Help menu, this manual
opens.
Figure 31: Help Menu