Delivery program - IMS Deutschland · 51CrV4+A 1.8159 DIN EN 10083 rolled soft annealed 22 - 240 51CrV4+A 1.8159 DIN EN 10250 forged+rough turned soft annealed 250 - 350 30CrNiMo8+QT

—Delivery program

— High-grade and engineering steel

— Stainless steel

— Bright steel

— Steel tubes

— Aluminium

— Services

deutschland.ims-group.com

07 / 2017 Subject to change without notice. Errors and omissions excepted. Product-specific data sheets take priority over the information provided in this catalogue.

The desired features are only binding if they have been agreed expressly upon conclusion of contract.

—Delivery program

—IMS group

—At IMS group, we focus on distribution and service provision for the German market.Our experienced, qualified employees ensure that our customers’ deliveries are reliable and received on time. Our aim is to provide complete solutions for speciality steel from a single source. “The right product at the right place at the right time” serves as the basis for our customers’ success stories.

—Whether stainless steel, bright steel, quality / engineering steel, tubes or aluminium – we always have more than 60,000 items in stock. We are always able to deliver “just-in-time”.

—The result is individual speciality steel solutions from a single source. Our modern warehouse and service locations ensure that we can advise, support and supply our customers throughout Germany. Our products are therefore close to the market and our service close to our customers.

—Düsseldorf

—Our products

Speciality steels complete solutions from a single source.

—Aluminium

—We can provide you with nearly the entire range of speciality steels in the most varied grades and dimensions. If needed, you can also purchase aluminium in selected dimensions from us in addition to steel – all from a single source.

—We store this comprehensive range permanently and throughout Germany at a total of ten warehouse and service locations. In all standard sizes, dimensions and qualities.

—Our supply range is complemented by comprehensive service and processing options. Our mechanical processing services range from chamfering, milling and sawing to complex drilling in accordance with customer specifications or technical drawings.

—High-grade and engineering steel

—Tubes

—Bright steel

—Stainless steel

High-grade and engineering steel

UNALLOYED STRUCTURAL STEEL

STEEL FOR QUENCHING & TEMPERING

CASE-HARDENING STEEL

NITRIDING STEEL

CREEP-RESISTANT STEEL

CRYOGENIC STEEL

ROLLER BEARING STEEL

—High-grade and engineering steel—Whether for mining, the automotive industry, mechanical engineering or on the high seas, quality steel and engineering steel from IMS group is used virtually everywhere. We are also a leading supplier for the wind turbine sector.

—Our many years of cooperation with renowned steel manufacturers and continuous controls ensure that all of our products meet the highest quality standards.

—Our stock includes more than 30 standard grades and various special grades, covering 2,500 various round steel items. We supply all producible alloyed and unalloyed engineering steels, whether rolled or forged, peeled or rough-turned.

—Your steel products come from a single source thanks to our nationwide distribution network. We can also supply speciality steels easily, without any problems.

— Unalloyed structural steel

— Steel for quenching and tempering

— Case-hardening steel

— Nitriding steel

— Creep-resistant steel

— Cryogenic steel

— Roller bearing steel

—Unalloyed structural steelProfile: Round

—Unalloyed case hardening steelProfile: Round

—NitridingsteelProfile: Round

—Alloyed case hardening steelProfile: Round

—Normalised construction steelProfile: Round

—Roller bearing steelProfile: Round

—Creep-resistant steelProfile: Round

—Cryogenic structural steelProfile: Round

—Unalloyed steel for quenching and temperingProfile: Round

—Alloyed steel for quenching and temperingProfile: Round

Grade Material No. Norm Production type Heat treatment Dimension (mm)

S355J0 / S355J2 1.0553 / 1.0577 DIN EN 10025 rolled — 16 - 300

S355J2G3+N 1.0570 DIN EN 10250 forged+rough turned normalised 310 - 850


S355J2+N 1.0577 DIN EN 10025 rolled normalised,with LRS certification 30 - 300


100Cr6+AC 1.3505 DIN EN 10084 rolled Annealed to spheroidised carbide 55 - 250


S355NL+N 1.0546 DIN EN 10025 || rolled normalised, with LRS certification 30 - 300


C35E 1.1181 DIN EN 10083 rolled — 20 - 200

C35R 1.1180 DIN EN 10083 rolled — 20 - 200

C45E 1.1191 DIN EN 10083 rolled — 16 - 300

C45E+N 1.1191 DIN EN 10250 forged+rough turned normalised 310 - 850

C45R 1.1201 DIN EN 10083 rolled — 16 - 300

C60E 1.1221 DIN EN 10083 rolled — 16 - 300

C60E+N 1.1221 DIN EN 10250 forged+rough turned normalised 310 - 700

C60R 1.1223 DIN EN 10083 rolled — 16 - 300


C15E 1.1141 DIN EN 10084 rolled — 20 - 300

C15E+N 1.1141 forged+rough turned normalised 310 - 450

C15R 1.1140 DIN EN 10084 rolled — 20 - 300


21CrMoV5-7+QT 1.7709 DIN EN 10269 rolled quenched+tempered 30 - 240

P250GH+N 1.0460 DIN EN 10273 || rolled normalised, with TÜV certification 30 - 300

ASTM A105 / SA105 || rolled normalised, with TÜV certification 30 - 300


31CrMoV9+QT+SR 1.8519 DIN EN 10084 rolled, straightened quenched+tempered, stress-relieved 30 - 300

31CrMoV9+QT+SR 1.8519 forged+rough-turned quenched+tempered, stress-relieved 310 - 400

34CrAlNi7-10+QT+SR 1.8550 DIN EN 10084 rolled, straightened quenched+tempered, stress-relieved 35 - 300

34CrAlNi7-10+QT+SR 1.8550 forged+rough turned quenched+tempered, stress-relieved 310 - 350


25CrMo4+QT 1.7218 DIN EN 10083 rolled quenched+tempered 25 - 300

25CrMoS4+QT 1.7213 DIN EN 10083 rolled quenched+tempered 25 - 300

42CrMo4+A 1.7225 DIN EN 10083 rolled soft annealed 25 - 200

42CrMoS4+A 1.7227 DIN EN 10083 rolled soft annealed 25 - 200

42CrMo4+QT 1.7225 DIN EN 10083 rolled quenched+tempered 20 - 300

42CrMo4+QT 1.7225 DIN EN 10250 forged+rough turned quenched+tempered 310 - 850

42CrMoS4+QT 1.7227 DIN EN 10083 rolled quenched+tempered 20 - 300

42CrMoS4+QT 1.7227 DIN EN 10250 forged+rough turned quenched+tempered 310 - 850

51CrV4+A 1.8159 DIN EN 10083 rolled soft annealed 22 - 240

51CrV4+A 1.8159 DIN EN 10250 forged+rough turned soft annealed 250 - 350

30CrNiMo8+QT 1.6580 DIN EN 10083 rolled quenched+tempered 20 - 300

30CrNiMo8+QT 1.6580 DIN EN 10250 forged+rough turned quenched+tempered 310 - 600

34CrNiMo6+QT 1.6582 DIN EN 10083 rolled quenched+tempered 20 - 300

34CrNiMo6+QT 1.6582 DIN EN 10250 forged+rough turned quenched+tempered 310 - 500


15CrNi6+A 1.5919 DIN EN 10084 rolled soft annealed 25 - 200

17CrNi6-6+A 1.5918 DIN EN 10084 rolled soft annealed 25 - 200

16MnCr5 1.7131 DIN EN 10084 rolled +TH, +FP or +U 20 - 300

16MnCr5 1.7131 forged+rough turned +TH, partly +FP 310 - 750

16MnCrS5 1.7139 DIN EN 10084 rolled +TH, +FP or +U 20 - 300

16MnCrS5 1.7139 forged+rough turned +TH, partly +FP 310 - 750

20MnCr5 1.7147 DIN EN 10084 rolled +TH, +FP or +U 20 - 300

20MnCr5 1.7147 forged+rough turned +TH, partly +FP 310 - 750

20MnCrS5 1.7149 DIN EN 10084 rolled +TH, +FP or +U 20 - 300

20MnCrS5 1.7149 forged+rough turned +TH, partly +FP 310 - 750

18CrNiMo7-6+FP 1.6587 DIN EN 10084 rolled +FP 40 - 300

18CrNiMo7-6+TH 1.6587 forged+rough turned +TH, partly +FP 310 - 600

Symbols for Heat treatments: +A soft annealing, +N normalised, +AC annealed to spheroidised carbide, +FP treated to ferrite-perlite structure, +QT quenched and tempered, +SR stress-relieved annealing, +TH treated to hardness range, +U untreated, LRS Lloyds Register of Shipping.Annexes for C-grades: E means maximum sulphur-content, R means specified range of sulphur-content

|| Principles for testing: AD W13, AD2000 W13, AD2000 A4, TRB 100, TRD 107, TRD 100, TRD 110, DGRL 97/23 EG) On request, we facilitate third-party certification through clas-sification associations such as TÜV, GL, BV, DNV or ABS.

Stainless special steel

CORROSION TUBES

CONSTRUCTION TUBES

DAIRY TUBES

HANDRAIL TUBES

SQUARE AND RECTANGULAR TUBES

SB-RAILING

AUSTENITIC, FERRITIC, MARTENSITIC

AND DUPLEX STANDARD GRADES

HEAT-RESISTANT STEELS

CREEP-RESISTANT STEELS

NON-MAGNETISABLE STEELS

VALVE STEELS

STEELS FOR THE AEROSPACE INDUSTRY

—IMS group can provide you with virtually the entire product range of stainless special steel. As a mill-independent distribution company, we purchase our material from a wide network of national and international mills.

—Our warehouse range, which is unique in Europe, includes numerous special items in addition to the entire range of standard dimensions and grades. The material is used in the automotive industry, the construction and energy industry and naturally also in the food industry, as well as in medical technology.

—If the required grade of steel is not directly available from the warehouse, we can obtain the steel in no time thanks to our worldwide distribution network – even “just-in-time” if required.

—After machine processing our stainless special steels become precision parts that satisfy the highest requirements.

—Stainless special steel

—Stainless tubes—Welded line pipes and dairy tubes made from stainless steel are subject to high technical production requirements as they are used, among other things, for the transportation and storage of corrosive, combustible and toxic liquids, gases and solids.

—The quality and processing requirements of stainless steel are especially high when tubes are used in hygienic applications. Such applications include drinking water systems or systems used in the food or pharmaceutical industries. However, product variety also plays a decisive role in addition to quality. This is important wherever tubes are used to serve a constructional or decorative purpose, such as in the architectural or furniture industry.

—We have one of the largest warehouse ranges for stainless, welded dairy, line and structural tubes and section tubes.

—Our fully automated high-bay warehouse in Düsseldorf with more than 3,200 cassettes guarantees that desired materials are available very quickly. As each individual cassette can be divided up to four times, we can stock different versions of several thousand items and batches. Other cassette warehouses of this kind can be found at our branches, ensuring that “just-in-time” delivery is also possible at a regional level.

—Corrosion tubes

— Construction tubes

— Dairy tubes

— Handrail tubes

—Square and rectangular tubes

—SB-Railing ®

—Seamless tubes and hollow bars

—ASTM tubes

—Dairy tubes Profile: Round

—Corrosion tubes Profile: Round

—Construction tubes Profile: Round

—Profile tubes Profile: Square

Profile: Rectangular

Material no. Standard Production type Heat treatment Surface Tolerance Dimension (mm)

1.4301 DIN EN 10357 welded not annealed / annealed cc/bc

unpolished / polished cd / bd — 18.0 - 204.0 / 1.0 - 2.0








1.4301 DIN EN 10217-7 TC1/ TC2 - AD2000 W2 welded not annealed / annealed bright / pickled EN ISO 1127 6 - 609.6 / 1 - 5




1.4301 DIN EN 10217-7 TC1/ TC2 - AD2000 W2 welded annealed bright annealed /

annealed+pickled EN ISO 1127 6 - 88.9 / 1 - 5








1.4301 — welded — unpolished / polished — 10 - 200 / 10 - 200 / 1 - 10








1.4301 DIN EN 10296-2 welded HF — unpolished / polished EN ISO 1127 8.0 - 129.0

1.4301 DIN EN 10296-2 welded TIG — unpolished / polished EN ISO 1127 8.0 - 129.0

—Stainless rolled & forged bars and bright steel

Material No. Norm Production type Heat treatment Surface Tolerance Dimension (mm)

1.4021 EN 10060 rolled / forged QT800 hot rolled / peeled Plus tolerance 20 - 500

1.4034 EN 10060 rolled / forged annealed hot rolled / peeled Plus tolerance 20 - 220















Profile: hexagonal


1.4021 EN 10278 drawn / ground QT800 drawn / ground h9 8 - 100

1.4034 EN 10278 drawn / ground annealed drawn / ground h9 8 - 100











1.4104 EN 10278 drawn annealed drawn h11 8 - 55





—Stainless rolled and forged bars Profile: Round

—Stainless bright bars Profile: Round

—All stainless long products can be sawn to your individual requirements. We would be happy to inform you about other mechanical processing options.

—Stainless free-cutting steels are usually delivered with improved machining properties.

—Any dimensions and grades that are not specified can also be delivered speedily upon request.

—Austenitic, ferritic, martensitic and duplex standard grades

—Heat-resistant steels

—Creep-resistant steels

—Non-magnetisable steels

— Valve steels

—Steels for the aerospace industry

—In the stainless long products segment, we have one of the largest inventories in the world.

—For our stainless rolled, forged and bright products, in addition to a comprehensive range of standard dimensions we also offer semi-finished products, rolled and bright wire.

—Due to their outstanding corrosion-preventing and mechani-cal properties, our stainless steels are used in the chemical industry, mechanical engineering, the food industry, energy and medical technology, traffic engineering, the aerospace industry, mining and in onshore and offshore industries.

Bright steel

UNALLOYED ENGINEERING STEEL

FREE-CUTTING STEEL

CASE-HARDENING STEEL

HEAT-TREATABLE STEEL

HARD CHROME-PLATED PISTON RODS

—Bright steel

—Our bright steel product is characterised by the high-quality bright surface and is attributable to the steel refining area. The bare surface means that there are fewer pores and cracks, and the best conditions for subsequent surface treatment are therefore in place. The precise dimensional accuracy also distinguishes this product from other steel products.Available versions include: round, square, hexagonal and flat steel. Profiles, including speciality steel profiles based on technical drawings, can also be made. Bright steel is produced in the form of bars and rings.

—Material can also be fully crack-tested on request.

—Unalloyed engineering steel

— Free-cutting steel

—Case-hardening steel

— Heat-treatable steel

—Hard chrome-plated piston rods

—Characteristics of bright steel

Smooth, bright, scale-free surface

Higher dimensional accuracy

Improved testing possibilities for internal and surface defects

Increased strength for drawn steel

Possibility of manufacturing thinner dimensions

Freedom from decarburisation and technical freedom from cracks when made using machining

Suitable for surface treatment depending on the surface finish.

—Unalloyed engineering steelProfile: Round

—Heat-treatable steelProfile: Round

—Hard chrome-plated piston rodsProfile: Round

Profile: Flat

Profile: Square

Profile: Hexagon—Free-cutting steel Profile: Round

—Case-hardening steelProfile: Round

Grade Material No. Norm Production type Heat treatment Surface Tolerance Dimension (mm)

S235JRC 1.0037 DIN EN 10277-2 drawn / peeled — bright h9 6 - 110

S355J2C 1.0577 DIN EN 10277-2 drawn / peeled — bright h9 5 - 110


11SMn30 1.0715 DIN EN 10277-3 drawn / peeled — bright h9 5 - 120

11SMnPb30 1.0718 DIN EN 10277-3 drawn / peeled — bright h9 4 - 120


20MnV6 1.5217 — hard chrome-plated — 15 my f7 / f8 10 - 18

20MnV6 1.5217 — hard chrome-plated — min. 20 my f7 19 - 200


C15E 1.1141 DIN EN 10277-4 drawn / peeled — bright h9 10 - 95

C15Pb 1.0403 DIN EN 10277-4 drawn / peeled — bright h9 8 - 50

16MnCrS5 1.7139 DIN EN 10277-4 drawn / peeled FP - Annealed bright h9 10 - 65

16MnCrSPb5 1.7142 DIN EN 10277-4 drawn / peeled — bright h9 14 - 55





C45E 1.1191 DIN EN 10277-5 drawn / peeled — ground h6 20 - 100


42CrMo4 1.7225 DIN EN 10277-5 drawn / peeled quenched+tempered bright h9 14 - 100

42CrMoS4 1.7227 DIN EN 10277-5 drawn / peeled quenched+tempered bright h9 14 - 100


C45E 1.1191 DIN EN 10277-5 drawn — bright h11 12 - 150 / 7 - 60


C45E 1.1191 DIN EN 10277-5 drawn — bright h11 10 - 90


C45E 1.1191 DIN EN 10277-5 drawn — bright h11 10 - 41


S235JRC 1.0037 DIN EN 10277-2 drawn — bright h11 12 - 300 / 5 - 60


S235JRC 1.0037 DIN EN 10277-2 drawn — bright h11 10 - 80

S355J2C 1.0577 DIN EN 10277-2 drawn — bright h11 16 - 60


11SMn30 1.0715 DIN EN 10277-3 drawn — bright h11 12 - 80

11SMnPb30 1.0718 DIN EN 10277-3 drawn — bright h11 6 - 80


11SMn30 1.0715 DIN EN 10277-3 drawn — blank h11 9 - 80

11SMnPb30 1.0718 DIN EN 10277-3 drawn — blank h11 10 - 75


S235JRC 1.0037 DIN EN 10277-2 drawn — bright h11 9 - 50

Profile: Flat

Profile: Square

Profile: Square

Profile: Hexagon

Profile: Hexagon

Steel tubes

STEEL TUBES

SEAMLESS

WELDED

PRECISION STEEL TUBES

SEAMLESS

WELDED

HYDRAULIC LINE PIPES

SQUARE TUBES

HOLLOW SECTIONS

CYLINDER TUBES

Grades Standard Production type Heat treatment Surface Dimension (mm)

S355J2H EN 10210 seamless Depends on grade rolled 10,2 - 811 / 1,6 - 100

E355 EN 10297 seamless +AR / +N / +QT rolled 10,2 - 811 / 1,6 - 100

P235TR1 EN 10216-1 seamless — rolled 10,2 - 811 / 1,6 - 100

P235GH / 16Mo3 / 13CrMo4-5 EN 10216-2 seamless +N / +QT / +NT / +I rolled 10,2 - 811 / 1,6 - 100

P355N EN 10216-3 seamless +N / +QT rolled 10,2 - 811 / 1,6 - 100

P215NL / P265NL / 26CrMo4-2 EN 10216-4 seamless +N / +QT rolled 10,2 - 811 / 1,6 - 100

S235JRH / S355J2H EN 10210 / 10219 welded Depends on grade rolled 10,2 - 1 200 / 1,2 - 30

E235/E355 EN 10296 welded +A / +N / +NW / +U rolled 10,2 - 1 200 / 1,2 - 30

P235TR1 EN 10217-1 welded +NW / +NP / +NR rolled 10,2 - 1 200 / 1,2 - 30

P235GH / 16Mo3 EN 10217-2 welded +NW / +NP / +NR rolled 10,2 - 1 200 / 1,2 - 30

P355NH EN 10217-3 welded +NW / +NP / +NR rolled 10,2 - 1 200 / 1,2 - 30

P215NL / P265NL EN 10217-4 welded +NW / +NP / +NR rolled 10,2 - 1 200 / 1,2 - 30

—Steel tubes

—Whether used as line pipes or structural elements, our steel tubes are used in the most varied areas in the automotive industry, mechanical engineering, steel construction, the architectural and const-ruction industry and in the energy sector.

—Our many years of cooperation with renowned tube manufacturers guaran-tees consistent quality standards. All steel tube products and their manufactu-rers are subject to continuous controls.

—Steel tubes

— Precision steel tubes

— Hydraulic line pipes

— Square tubes

— Hollow sections

— Cylinder tubes

—Precision steel tubes Profile: Round

Profile: Square / Rectangular

Profile: Square / Rectangular


E235 / E275 / E355 10305-5 welded +A / +N bright / black 10 - 150 / 1 - 6


E235 / E275 / E355 10305-1 / -4 Seamless cold drawn +C / +LC / +SR / +N bright 4 - 260 / 0,5 - 25

E235 / E275 / E355 10305-2 welded cold drawn +C / +LC / +SR / +N bright 4 - 260 / 0,5 - 25

E235 / E275 / E355 10305-3 welded +C / +LC / +SR / +N bright 4 - 260 / 0,5 - 25

—Steel tubesProfile: Round

—Cylinder tubes Profile: Round


S235JRH / S355J2H EN 10210 / 10219 seamless / welded Depends on grade rolled 40 - 400 / 2,9 - 20


E355 EN10305-1 seamless +SR ID H8 / H9 20 - 300 / 2,5 - 25

E355 EN10305-2 welded +SR ID H9 / H10 16 - 125 / 2 - 7,5

Other grades and shapes on request



Other grades, chrome-plated piston tubes on request, hard chrome-plated piston rods see bright steel


Aluminium

ALUMINIUM RODS

ALUMINIUM TUBES

ALUMINIUM SPECIALITY PROFILES

—Aluminium

—Aluminium and aluminium alloys are becoming increasingly important in many areas of application. We offer steel and aluminium from a single source in order to expand the services we offer to our customers. As a comprehensive solution provider, we can offer you virtually the entire range of aluminium products in the most varied grades and dimensions.

—Aluminium rods

—Aluminium tubes

—Aluminium speciality profiles

—We have a wide range of extruded aluminium products such as rods, pipes, and profiles. Moreover, we also offer you individual aluminium solutions for almost all technical areas. In addition to the standard range, we also offer a large number of special dimensions.

—From standard alloys to custom-tailored special materials for demanding components, with IMS group you have a service partner for all aluminium and steel solutions.

—Extruded Profile: Round

—Drawn Profile: Round

—Cast Profile: Round

—Special profiles

Profile: Square

Profile: Flat

Profile: Tube

Profile: Hexagonal

Grade Material no. Standard Prod-type Heat treatment Tolerance Dimension (mm)

EN AW-2007 3.1645 EN 515 ; 573-3 ; 755-1 ;-2 ; -3 extruded T4 / T4511 EN 755-3 20 - 450


EN AW-2017A 3.1325 EN 515 ; 573-3 ; 755-1 ;-2 ; -3 extruded T4 / T4511 EN 755-3 20 - 300

EN AW-5083 3.3547 EN 515 ; 573-3 ; 755-1 ;-2 ; -3 extruded H112 EN 755-3 20 - 180

EN AW-6026 / AA-6026 — EN 515 ; 573-3 ; 755-1 ;-2 ; -3 extruded T6 EN 755-3 30 - 170




EN AW-2007 3.1645 EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T3 EN 754-3 10 - 65

EN AW-2011 3.1655 EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T8 EN 754-3 10 - 65

EN AW-2017A 3.1325 EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T3 EN 754-3 22 - 50

EN AW-6026 / AA-6026 — EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T6 EN 754-3 10 - 65

EN AW-6082 3.2315 EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T6 EN 754-3 10 - 70

EN AW-7075 3.4365 EN 515 ; 573-3 ; 754-1 ;-2 ; -3 drawn T6 EN 754-3 14 - 70


EN AW-2007 3.1645 EN 515; 573-3 Cast, rough-turned — — 160 - 615

EN AW-5083 3.3547 EN 515; 573-3 Cast, rough-turned — — 160 - 615

EN AW-6082 3.2315 EN 515; 573-3 Cast, rough-turned Also possible in T6 — 160 - 615


EN AW-2007 3.1645 EN 515 ; 573-3 ; 755-1 ;-2 ; -4 extruded T4 / 4511 EN 755-4 20 - 200



EN AW-2007 3.1645 EN 515 ; 573-3 ; 755-1 ;-2 ; -5 extruded T4 / 4511 EN 755-5 20 × 5 - 150 × 60

EN AW-6082 3.2315 EN 515 ; 573-3 ; 755-1 ;-2 ; -5 extruded T6 / T6511 EN 755-5 20 × 5 - 150 × 85 / 200 × 20


EN AW-6082 3.2315 EN 515 ; 573-3 ; 755-1 ;-2 ; -7 / 8 extruded T6 EN 755-7 / 8 40 × 4 - 330 × 40


EN AW-6082 3.2315 EN 515 ; 573-3 ; 754-1 ;-2 ; -6 drawn T6 EN 754-6 17 - 36

We also provide special profiles in all common aluminium alloys according to your specifications speedily by new production.We cooperate with selected, leading European press shops, which excel themselves through their wide-ranging product assortment.

Weight per meter 0.1 kg / m up to 120 kg / m, fixed lengths as of 15 mm und production lengths up to 20 m; Surfaces: mill finished, anodized and powder coated.

Services

—In order to meet customer wishes, we have individually tailored steel solutions and precise processing manufactures specifi-cally to the relevant application in our units.

— High-grade and engineering steel

— Stainless steel

— Bright steel

— Steel tubes

— Aluminium

—The highly modern systems in our processing centres enable us to meet all individual requirements.

—The satisfaction of our customers is our utmost priority. Reliable, prompt delivery – even “just-in-time” upon request – is therefore a matter of course for us. The packaging of IMS group deliveries is far superior to the industry standard.

—Many years of logistics experience have taught us that semi-fi-nished products made from light metal are often damaged in transit. To prevent this, we attach great importance to secure packaging methods. If the customer so requests we can also provide customised solutions in this regard. Individual logi-stics solutions and our dense distribution network – with 10 locations in Germany alone – highlight our proximity to the customer. Last but not least, we are an important partner for the automotive and automotive supply industries in all product areas, and are correspondingly certified.

—Services

High-grade and engineering steel

The efficient production facilities and highly modern technology in our processing centres enable us to implement single saw cuts and series of cuts with dimensions between 20 mm and 1,100 mm.

— Longitudinal turning—Bevelling—Drilling—Thread-cutting

— Centring—Processing of extraction orders—Orders for open die forging

Stainless steel

We manufacture shafts and axles forfurther processing by the end customer in theautomotive industry.

—Sawing—Chamfering—Drilling—Deburring

—Milling, facing—Polishing—Peeling—Grinding

—Centring—Complete end finishing (facing, bevelling, centring)—Processing according tofrom drawing

Bright steel

In our short length centre we produce short pieces in accordance with your specifications.

—In all standard types of bright steel: drawn, peeled, grinded, rolled and descaled, heat-treated—End finishes can be chosen freely: Turning, centring, facing, end finishing based on a drawing upon request—Possible options include: length measurement, straightness testing, demagnetisation, weight recording, packaging

Steel tubes

In addition to a wide product range, we also offercomprehensive processing options and a fixed length service.

—Fixed length service—End finishing—Outside machining—Tube processing

Aluminium

In our aluminium processing centre it is possible to execute various processing steps using the most modern machinery.—We can provide rods with special chamfers individually and centre them. We can also chamfer both sides if the customer so desires.

— Chamfering—Sawing—Centring

— Deep-hole drilling—Fixed length service

— Processing according to drawing

—Contact—Contact—Do you have any questions or suggestions, or would you like any further information? Then please get in touch.—Our distribution network is organised regionally. Please address any queries or questions about our product and supply range directly to the distribution location closest to you.

IMS Deutschland— Berlin

Egellsstr. 21

DE - 13507 Berlin

T +49 30 4 17 84 - 3

F +49 30 4 17 84 - 450

[email protected]

— Bielefeld

Lübberbrede 4

DE – 33719 Bielefeld

T +49 521 2 08 83 - 0

F +49 521 2 08 83 - 17

[email protected]

— Chemnitz

Gottfried-Schenker-Str. 11

DE – 09244 Lichtenau

T +49 37208 8 01 - 0

F +49 37208 8 01 - 30

[email protected]

— Certificates /Accreditations

— The quality of our products plays a decisive role in our success on the market. IMS Deutschland GmbH, Düsseldorf, including its branches, is certi-fied in accordance with DIN EN ISO 9001.

— The Düsseldorf location is also ISO / TS 16949 certified.

— Our primary objectives are customer orientation and customer satisfaction. This includes the further de-velopment of products together with our customers and working in partnership with our suppliers.

—IMS group has adopted a zero-defect philosophy. Our priority here is on preventing rather than de-tecting defects.

—IMS Deutschland uses the following tools and methods:

– Project planning

– Advanced quality planning

– Statistical process control (SPC)

– Process and machine capability analyses

– Measurement systems analysis (MSA)

– Failure mode and effects analysis (FMEA)

– Audits (product, process and system audits)

– Benchmarking

– Continuous improvement

– 8D report

– Initial sample process (PPAP / VDA / IMDS entry)

— Certificates / Accreditations

IMS Deutschland GmbH

– ISO 9001

– ISO/TS 16949

– ISO 14001

– FORD Q1-Award

—

deutschland.ims-group.com

— Düsseldorf

Hamborner Straße 55

DE – 40472 Düsseldorf

Postfach 35 01 65

DE – 40443 Düsseldorf

T +49 211 509 - 2000

F +49 211 509 - 2954

[email protected]

— Fellbach

Schaflandstraße 22

DE – 70736 Fellbach

T +49 711 57 65 - 0

F +49 711 57 65 - 106

[email protected]

— Hamburg

Bredowstr. 19

DE - 22113 Hamburg

T +49 40 75 60 51 - 0

F +49 40 75 60 51 - 40

[email protected]

—deutschland.ims-group.com

Delivery program - IMS Deutschland · 51CrV4+A 1.8159 DIN EN 10083 rolled soft annealed 22 - 240 51CrV4+A 1.8159 DIN EN 10250 forged+rough turned soft annealed 250 - 350 30CrNiMo8+QT

Documents