This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Item # DescriptionFNSOFD-25’ 12” x 18” Decal (25’)FNSOFD-50’ 12” x 18” Decal (50’)FNSOFS-25’ 12” x 18” Metal Sign (25’)FNSOFS-50’ 12” x 18” Metal Sign (50’)
Item # Size DimensionsV-60 Vertical 60 gal 24” DIA x 42” TALL60-A G/uG 60 gal 24” DIA x 37 1/2” OALV-120 Vertical 120 gal 30” DIA x 4’6” TALL120-AG/uG 120 gal 24” DIA x 68” OAL150-AG/uG 150 gal 24” DIA x 84” OAL250-AG/uG 250 gal 30” DIA x 94” OAL325-AG/uG 325 gal 30” DIA x 119” OAL500-AG/uG 500 gal 37” DIA x 119” OAL500-uG 500 gal 37” DIA x 119” OAL
AG/uG: Designed for either above or underground installation. All valves are under the dome.uG: Designed for underground installation. Tank has multivalve on 24” riser.
420# Vertical w/ POL, outage, fill, relief, & gauge M1499.1 28gal Vertical ASME w/ multivalve & gauge M681438L (100#)*Sureflame valve has a gauge in the handwheel.DFG3010 Replacement gauge for Manchester M681438LDFG3010-D Replacement dial for Manchester M681438L 100#
A.S.M.E cylinder
We are a consignment location for American Welding & Tank Co. Pick up a tank
from us and be invoiced by American Welding.
R-CC COMPOSITE 16# CYLINDER
These Ragasco Cylinders visibly show the liquid level at all times. This units design gives a softer friendlier look than traditional cylinders. The handgrip has no rough edges and is 50% lighter than steel cylinders and holds the same gas volume. The R-CC cylinders are non-corrosive and test show when attacked by fire the unit reacts with a controlled burnout rather than an explosion.
CYLINDERS AND ACCESSORIES D.O.T. Cylinders, Tools, & Accessories
cyliNder tools/accessories
N201CYLINDER FILLING VALVEFills cylinders by weight and stops the gas supply when specified fill weight is reached. It attaches to a beam type scale and requires no electrical or mechanical power.
E-z STAMPAir gun uses standard 1/4” dies to stamp numbers and letters on cylinders. works on 60 lbs. of air pressure and is simple to operate.
Item # DescriptionE-z-A Air gun w/ numbers and letter “E”E-z-B Air gun w/ numbers and letters
CP054177Replacement Stylus for Air Scribe.
CP9361-1AIR SCRIBE KITAir operated tool for marking DOT cylinders after required inspection. writes quickly and easily on steel.
MG130#20292MARSHALL GAS PuRGING KITSafe, reliable method for purging LPG cylinders.
RCACYLINDER STAMPING ANVILHolds 1/4” die in place and provides backing behind collar to prevent collar bending.
CYLINDER MARKING DIES
Item # DescriptionHL4980-14 1/4” Letter SetHL4980-04 1/4” Number SetHL4980-E 1/4” Letter “E” only
BOT-L-RENCHTools for removing and installing cylinder valves.
CYL-VISECYLINDER CLINCHEREconomical vise designed to secure cylinders up to 100# capacity for easy valve removal. use a socket wrench to tighten and loosen the strap.
MINuTE-MAN Ez ONE STEP ANCHORING SYSTEMSecurely anchors tanks and cylinders in flood prone areas. Deluxe anchors have compacting disks and stabilizing heads.
33# MOTOR FuEL CYLINDER STORAGE CABINETSM Series Features:• 3 safety decals• Tapered shelf front• Heavy duty welded hinge• Lockable latch• Meets all safety requirements• Assembled and ready to use
RR1564LIFT TRuCK CYLINDER RACKRack holds four 33# lift truck cylinders. Bar locks for security. Multiple racks can be bolted together.
asMe taNk & 420# cyliNder aNcHoriNG systeM
Item # Holds Dimensions M4 4 cylinders 30” w x 40” H M6 6 cylinders 30” w x 55” H M8 8 cylinders 30” w x 70” H M12 12 cylinders 43” w x 70” H M16 16 cylinders 60” w x 70” H M24 24 cylinders 85” w x 70” H
Item # Holds Dimensions x8 8 cylinders 27” D x 30” w x 50” H x12 12 cylinders 27” D x 43” w x 50” H x16 16 cylinders 27” D x 60” w x 50” H x18 18 cylinders 27” D x 43” w x 72” H x24 24 cylinders 27” D x 60” w x 72” H x24L (low profile) 24 cylinders 27” D x 85” w x 50” H x36 36 cylinders 34” D x 60” w x 72” H
20# CYLINDER STORAGE CABINETSx Series Features:• locations for up to 3 safety
placards• Heavy duty welded hinge• 24 and 36 cylinder cabinets have
double doors • Can be fastened to floor• Your choice of color with acrylic
Our propane dispensers are complete ly assembled and pressure tested. Each unit can be purchased free-standing or in either our upright cabinet or our angle cabinet which will also accommodate a 1000# platform scale. Listed below are our most common units. Any dispenser can be modified to your specifications. The GPM pump ratings are at zero differential pressure. Actual delivery GPM will be less.
Cabinets are available in white powder coated steel or diamond plate aluminum.
disPeNsiNG eQUiPMeNt
All dispensers are completely assembled and pressure tested. They are built to order so modifications to fit your specifications can be easily made.
H48C-DP
G Item # DescriptionDISP101NC Cylinder filling dispenser: 10 GPM LGF1E Pump, 1HP motor, 18’ of 1/2” hose, no meterDISP101MNC Cylinder and low volume motor fuel/RV dispenser: 10 GPM LGF1E pump, 1 HP motor, 18’ of 1/2” hose, meter, breakaway coupling.DISP151NC Cylinder filling dispenser: 15 GPM LGF1PE pump, 1 1/2HP motor, 18' of *3/4" hose, no meterDISP151MNC Cylinder and high volume motor fuel/RV dispenser: 15 GPM LGF1PE pump, 1 1/2 HP motor, 18’ of *3/4” hose, meter and breakaway coupling.DISP151M2NC Same as DISP151MNC except it has an extra 1/2” hose ahead of the meter for non-metered cylinder filling operations.DISPRFNC High volume motor fuel/RV dispenser: 18 GPM LGRLF1 1/4 pump, 1 1/2 HP motor, 18’ of *3/4” hose, breakaway coupling, no meter.
DISPRFMNC High volume motor fuel/RV dispenser: 18 GPM LGRLF11/4 pump, 1 1/2 HP motor with 18' of *3/4" hose, meter, breakaway coupling.
*The State of Florida only allows 1/2" filling hose on dispensers.
CAbinET OpTiOns Suffix For CABINET OPTIONS, replace the NC suffix above with one of the following: SC Dispenser mounted in a standard powder coated cabinet AC Dispenser mounted in an angle, powder coated steel cabinet (accomodates a 1000# scale) DP dispenser mounted in a standard aluminum diamond plate cabinet DPA Dispenser mounted in an angle, diamond plate aluminum cabinet
diSPEnSinG EqUiPmEnt (continUEd)
DISPENSER CONNECTING KITSOur kits include a 1 1/4” valve for the liquid opening in the bottom of the tank, a flexible connector, a strainer, and all pipe fittings required to connect our dispenser to your tank. You may need to provide a length of schedule 80 pipe depending on where the dispenser is located. See appendix for material lists & schematics of these kits.
Item # Description
LF1-C Deluxe kit includes Fisher’s 1 1/4” internal valve with CLH15C cable kit for remote operation from within cabinet. All piping components are for pump inlets of 1 1/4”.
LF1-D* Economy kit includes Squibb-Taylor’s AL1596 manually operated angle valve with excess flow. All piping components are for pump inlets of 1”.
*LF1-D NFPA Pamphlet 58 2008 edition requires the use of an internal valve on dispenser tanks. If your state has adopted the 2008 edition, you must use the LF1-C kit.
H16S16” TANK STANDSStands have sleeves welded to base that align with sleeves on the bottom of our dispensing cabinets. The sleeves accept 2” pipe that allows the tank and cabinet to be attached as a skid-mount unit.
CABINET DIMENSIONSItem # DimensionsH48C-DP 34" w, 26" L, 42" HH50AC-DP Bottom 44 1/2" w, 38 1/2" L Top 44 1/2" w, 12" L 46 1/2" H
Tank Stands – Holes 29" center to center
CLH15C15’ cable to operate internal valve.
CLH15C-KITIncludes cable and brackets to install cable to a cabinet and internal valve.