This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Featuresl For creating clean visible edges and preparing welds l Device for stationary or mobile use l Easy and quick change-over from stationary to mobile use with wing nuts and removable foot l Tool-free setting of the chamfer depth l Standard angle settings at 15°, 30° and 45°l Manual feed l Patented technology l Handy and powerful device l For machining construction steel, non-ferrous metals and plastics l Functional arrangement of the handles allows for safe guiding of the device in mobile operation l Guide plate equipped with adjustable ball heads for smooth running of the workpiece l Automatic safety shutoff in case of overheating
Specification KE 100 Chamfer angle 15° / 30° / 45°Chamfer width at 15° approx. 5 mmChamfer width at 30° approx. 6 mmChamfer width at 45° approx. 7 mmElectrical connection 230 VServices 750 WSpeed (cont. variable) 2000 - 5000 rpmDims (L x W x H max.) 360 x 230 x 280 mmWeight 10.5 Kg
l Edge deburring device KE 100 l Milling head with cutting platesl 3 rubber feetl Workpiece slide
Included as standard:
Optional Accessories1.Milling Head 0399-20052.Cutting Insert 10 Pcs 0399-2006
1-200-990 MSH 125• Special design makes it suitable to
mount it on any type of milling machine• Vice type clamping flange for mounting and removing• Built in lubrication system for smooth running • Ram adaptors to suit any type of milling machine• Stroke length can be changed
very easily• Easy adjusting this head to make any type of key or groove• Quick stroke speed.
Dividing Heads - Semi Universal 100mm Centre Height 128mm Centre Height
Included as standard:Showing: 3 Jaw Chuck fitted onto Back Plate, also a standard Accessory.
l 5” Dia for BS ‘0’• 6” Dia for BS ‘1’ and other Accessories as shown in picture.
Specification TAILSTOCK mm mm mm mm mm mm mm mm
A1 B1 H1 h1 I1 a 1 b 1 g 1
BS ‘0’ 155-180 64 107 80-108 11 134 94 16
BS ‘1’ 170-195 64 150 150-115 11 155 110 16
Specification mm mm mm mm mm mm mm
BS ‘0’ 177 188 173 100 160 91 16 MT2 18 25
BS ‘1’ 245 230 220 128 205 114 16 MT3 20 45
A B H h a b g CentreTaper
Dia of Spindle
hole Weight
KgsHEADSTOCK
BS ‘0’ 2-100-100 BS ‘1’ 2-100-200
Featuresl Hardened & ground Spindle is rigidly held in a tapered seat by a draw-in nut l Hardened & ground worm is adjustable to
mesh correctly with helically cut phosphor-bronze worm Gear and it can be disengaged for the direct indexingl The ratio between the worm and the worm Gear is 40:1 l The Swivel Head can be locked at any angle from 10° below
horizontal to 90° vertical (calibration is for guidance only). l It can divide in any angle by direct, indirect or differential methodl Both models have 24 hole dividing Plates for fast direct indexing on no. 2,3,4,6,8,12 & 24 l Both models have Threaded
Spindle Nose for Chuck Back Plate, Spindle is 11/2” diameter x 8TPI. l Easy indexing of all numbers from 2 to 50 & many numbers from 52 to 380 l Complete with head, adjustable Tailstock, 3 Indexing Plates, Centre, 24 Hole Dividing Plate & Threaded Back Plate fitted to Chuck.
Dividing Heads - Universal133mm Centre Height 2-100-300
l Hardened & ground Spindle is rigidly held in a tapered seat by a draw-in nut l Hardened & ground worm is adjustable to mesh correctly with helically cut phosphor-bronze worm Gear & it can be disengaged for direct indexingl The ratio between the worm & the worm Gear is 40:1 l The Swivel Head can be locked at any angle from 10° below horizontal to 90° vertical (calibration is for guidance only) l It has a Threaded Spindle 21/4 “ diameter x 8TPI for Chuck Back Plate l Easy indexing of all numbers from 2 to 50 & many numbers from 52 to 380. It is also equipped for differential indexing of all numbers from 2 to 380 & spiral cutting. l It is complete with Dividing Head, adjustable Tailstock, 3 Indexing Plates, Centre for driving assembly, Gear Arbour, 12 Gears with 2 Arms for differential Indexing or Transmitting Machine Table Feed to worm shaft for spiral cutting & Chuck Back Plate with Chuck fitted.
Specification mm mm mm mm mm mm mm
BS ‘2’ 359 340 235 134 212 135 16 MT4 25 95
A B H h a b g Centre Taper
Spindleholemm
Weight KgsHEADSTOCK
Specification TAILSTOCK mm mm mm mm mm mm mm mm
A1 B1 H1 h1 I1 a 1 b 1 g 1
BS ‘2’ 135-175 75 130 120-145 15 175 125 16
Included as standard:8" 3 Jaw chuck, indexing plates, tailstock, set of gears and other accessories shown in the picture above
• Suitable for use on Drilling, Milling & Jig Boring Machines
• 24 position Index Plates is hardened for longer life• 6 Masking Plates for 2, 3, 4, 6, 8 and 12 divisions• Clamping shoes lock Spindle without affecting Spindle
l A most essential accessory – a complete answer to clampingl Saves setting up time l Covers a wide rangel Choice of models. 58 Pc. Steel clamping kit includes;l 24 Pcs Studs 4 of each length 3”,4”,5”,6”,7” and 8”l 6 Pcs T nuts, 6 Pcs Flanged Nuts l 4 Pcs Coupling Nuts, 6 Pcs Step Clamp l 12 Pcs (6 Pairs) Step Blocks.
CLAMPING KITS
Clamping Kits & Angle Plates
ANGLE PLATES
l Excel Angle Plates are made of high quality
castingl Stress relieved & ground finishedl These are webbed for rigidityl Workshop grade accuracy.
Specification Model Size AP 3 3 x 21/2 x 2” 1/2 2-400-100AP 4 41/2 x 31/2 x 3” 2 2-400-200AP 6 6 x 5 x 41/2” 4 2-400-300AP 8 8 x 6 x 5” 7 2-400-400AP 10 10 x 8 x 6” 12 2-400-500AP 12 12 x 9 x 8” 20 2-400-600
Specification
CK, AP
Plastic Carry Case
PK106M MAYBE PACKED DIFFERENTLY DUE TO WEIGHT
SOME PK105 & PK104M2 MAY STILL BE PACKED LIKE THIS
Specification Model A B C D H CA 1 200 150 45 14 120 3 12CA 2 254 202 68 16 150 3 23CA 3 300 250 70 16 165 3 35CA 4 380 300 70 16 180 3 46
mm Kgs
SWIVEL ANGLE PLATES
ANGLE LOCK VICES l Made of high quality
Ductile Iron 8000 PSI for minimum distortion
l The enclosed Lead Screw & sliding surface are hardened & ground
l Highest clamping powerl It’s very accurate &
durablel This Vice is so
designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable Jaw & thus thrusts the movable Jaw downwards. Therefore the workpiece does not move up, even if it is held at the top of the Jaw Plates.
EXCEL HYDRAULIC MACHINEl Ruggedly constructed for Milling, Drilling, Shaping, Grinding & many other machine shop applications. l Body is made of high quality ductile Cast Iron, resists deflection or bending. l Sliding Bed Ways flame hardened & ground. l.Concealed Spindle for protection against chips & dirt. l Hydra-booster system for maximum clamping pressure with minimum force. l.Quick clamping and locking for easy operation. l Supplied with Swivel Base as standard.
2-PIECE MILLING MACHINE VICESFor extra long work, utilise full length of Machine Bed. Work piece is located directly on bed for rigidity. Soft Jaws locate on bed & can be keyed to table slots for accuracy. These are much lighter to handle than one piece vice of same capacity. Quarter turn of detachable handle clamp works firm enough for heaviest cuts.
l Angles can be set in 3 dimensions. Swivels 360° around base. The Vice can be elevated through 90° from the horizontal to vertical. And also can be tilted on its lower Angle Base up to 45° in both right and left.
l Tilting of any angle all keep the work piece steady, smooth
l Particularly the clamping part of Screw is strengthened by a bush made of gunmetal.
ER Collets cover better range than others due to extra flexibility. Their sizes increase in 1mm increments. Imperial sizes are also covered by the Metric Collets e.g. 10mm hold all sizes over 9mm and upto 10mm. Therefore 3/8” size is covered by this.
R8 x ¹/4 3-520-100E R8 x 6mm 3-530-100ER8 x ³/8 3-520-200E R8 x 10mm 3-530-200ER8 x ¹/2 3-520-300E R8 x 12mm 3-530-300ER8 x ⁵/8 3-520-400E R8 x 16mm 3-530-400ER8 x ³/4 3-520-500E R8 x 20mm 3-530-500E
R8 x ¹/4 3-520-100T R8 x 6mm 3-530-100TR8 x ⁵/16 3-520-150T R8 x 8mm 3-530-150TR8 x ³/8 3-520-200T R8 x 10mm 3-530-200TR8 x ¹/2 3-520-300T R8 x 12mm 3-530-300TR8 x ⁵/8 3-520-400T R8 x 16mm 3-530-400TR8 x ³/4 3-520-500T R8 x 20mm 3-530-500T
Specification
Quick change tap holder for above Tapping Heads, with built in overload safety clutch. Type TCS1B
NT40 THQC 115 3-660-200
Stock No.3mm Q.C. Tap Holder 3-660-9034mm Q.C. Tap Holder 3-660-9045mm Q.C. Tap Holder 3-660-9056mm Q.C. Tap Holder 3-660-9068mm Q.C. Tap Holder 3-660-90810mm Q.C. Tap Holder 3-660-91012mm Q.C. Tap Holder 3-660-912
Specification Model Taper Tapping Stock No R8 x J2 7/16 UNF 3-860-100R8 x J6 7/16 UNF 3-860-200R8 x J3 7/16 UNF 3-860-300 R8 x J4 7/16 UNF 3-860-400R8 x B16 7/16 UNF 3-860-500
R8 TAPER - JACOBS & B16
ISO 30 & 40 - JACOBS 6 & B16
" " " " "
" "
"
"
LLAMBRICH PRECISION CHUCKKEY TYPE STANDARD
l Made from High Quality Material • Toughened Body and Hardened Jaws are Precision Ground for Accuracy.
Specification Model Size Stock No.CY 13 1 - 13mm Capacity with J6 Taper 4-105-100CY 16 1 - 16mm Capacity with J3 Taper 4-105-200CY 16 1-16mm Capacity with B16 Taper 4-105-300
LLAMBRICH KEY TYPE WITH BALL BEARING
Specification
Model Size Stock No.
CBB 13 1 - 13mm Capacity with J6 Taper 4-106-100CBB 16 1 - 16mm Capacity with J3 Taper 4-106-200
LLAMBRICH KEYLESS CHUCKSpecification
Model Size Stock No.
CKS 13 1 - 13mm Capacity with J6 Taper 4-126-100CKS 16 3 - 16mm Capacity with J6 Taper 4-126-200
Specification Model Size Stock No.
DKC13 1-13mm Capacity with B16 Taper 0305-0632DKC16 1-16mm Capacity with B16 Taper 0305-0633
For measuring internal & external with data presetting function. Absolute measurement and comparison measurement conversation at any position, metric/inch conversion at any position.
DIGITAL KNIFE EDGE VERNIERSl For measuring internal external & depthl Thumb wheel for easy movementl Manual power on/offl Zero setting at any position, Metric / Inch conversion at
any position.
Graduation: 0.01mm/0.0005”
DEPTH MICROMETERS
Depth Micrometers, Height Gauges & Verniers
Specification
DMI 4
0-4" 0.001” 7-110-400
0-100mm 0.01mm 7-111-400
ModelDMM 100 Graduation Stock No.
VERNIER HEIGHT GAUGESl Carbide tipped scriber with
Specification Model Size Stock No.DSM 13 13 Pc Drill Set 1.5-6.5mm x 0.5mm 7-500-100DSM 19 19 Pc Drill Set 1-10mm x 0.5mm 7-500-200DSM 25 25 Pc Drill Set 1-13mm x 0.5mm 7-500-300DSI 21 21 Pc Drill Set 1/16 - 3/8 x 1/64 7-500-400DSI 29 29 Pc Drill Set 1/16 -1/2 x 1/64 7-500-500
CENTRE DRILLS
DRILL SETS
TAPER SHANK DRILL SETS
TAPER SHANK DRILLS No 4 MT Shank Diameter Stock No.
l Effectively reduce vibration and insulate against noise l Fast and technically uncomplicated levellingl Eliminates floor unevenness up to 5º l Precision levelling by means of a regular threaded screw
l Jackscrew M12 x 150l Maximum load: 600 kg
l Jackscrew M16 x 150l Maximum load: 1500 kg
Milling Accessories CARBIDE END MILL SET
l 18-part; 3 each in the sizes 3, 4, 6, 8, 10 and 12 mml 4-cutting edge versionl Coated solid carbide end mill (TiALN)l Centre cut for plungingl Rake angle 35°
3 pc. each
RADIUS END MILL SET
l 9 - part; 3 each in the sizes 4 mm, 6 mm, 8 mml 2 - cutting edge versionl Coated solid carbide end mill (TiALN)l Face cutting geometry for plungingl Rake angle 30°
3 pc. each
EDGE SENSOR
0335-2118
0335-2116
0335-1171l Rotating spindlel Probe Ø 10 mm
0335-2981
0335-2982
ANTI VIBRATION LEVELLING MOUNT
WORKPIECE SUPPORTMaterial S 45CWPS-1 adjust.height 40 - 50 mm 0335-4261WPS-2 adjust.height 65 - 90 mm 0335-4262WPS-3 adjust.height 90 - 140 mm 0335-4263WPS-4 adjust.height 140 - 230 mm 0335-4264
l Universal insert to treat all Steel and NE metalsl For surface & copy Millingl Base body & Clamping Shank are forming a unit, thus short projection length & stable clampingl Special geometry for Milling at high speedl Including 5 Cutting Inserts RDET 1003 MOSN 8026 l Including Torx TX15.
l 10 pcs of 4 Flute End Mills
FACE CUTTERS
l 5 Cutters l Outside diameter 52mml Indexable inserts Ø10mm l ISO designation RDX. 1003 D52/R5
ISO 30 / ISO 40
MT 2, MT 3 & MT 4
7-510-100
Milling Cutters
RDET
HM REVERSIBLE CARBIDE TIPS
2
l RDET 1003 MOSN8026l Positive cutting geometry l PVD coatedl To machine steel of up to 900 N/mm stainless steel, aluminium, non-ferrous heavy metal, cast iron.
l RDHT 1003 MO-FA HF7l Very positive cutting geometryl Polishedl To machine AL alloy, copper base alloy, plastic material
BT 20 Weldon Tool Holder Ø 6 mm 0335-2732Ø 8mm 0335-2734Ø 10 mm 0335-2736Ø 12 mm 0335-2738Ø 20 mm 0353-6315
BT 20 ER 16 Collet Chuck0335-2741
ER 16 Collet Chuck Spanner 0335-2742
ER 16 Collet Set
0334-0282
12 Pieces 1-10mm
BT 20 - B16 Drill Chuck Arbor 0335-2727
BT 20 Pull Studs 0335-2726
BT 30 & BT 40Face Mill Holder
0335-3306BT30x22mm
BT40x27mm0335-3336
BT Drill Chuck BT301-13mm0353-6303
BT401-13mm0353-6333
Weldon Holders
6 mm 0335-3310 0335-33408mm 0335-3311 0335-334110 mm 0335-3312 0335-334212 mm 0335-3313 0335-334316 mm 0335-3314 0335-334420 mm 0335-3315 0335-3345
Dia. BT 30 BT 40
Morse Taper AdaptersBT 30 x MT2 0335-3305
BT 40 x MT30335-3335
ER 32 Collet Chuck BT 30 ER 32 0335-3304
BT 40 ER 320335-3334
ER 32 Collet Chuck Spanner 0335-3307
ER 32 Collet Set
18 part Collet Set Ø 3-20mm0344-1122
Pull Stud
BT 30 0335-3302BT 40 0335-3332
Taper Squeegee
BT 30/ISO 30, R8 0335-3301BT 40 0335-3331
Assembly & Tool Adjustment Gauge For easy & precise adjustment of tools. Vertical & horizontal collet for tools with a steep-angle taperBT 30 0353-6193BT 40 0353-6194
Tool Height Adjuster Analogue version. For fast & easy determination of the reference point on the Z axisand/or for adjusting tools "tozero" (e.g for milling or drilling)without damaging the workpiece.Housing height 50mm0353-6290