GEDORE presents extended range of flaring tools and manual pipe benders GEDORE is extending its Mixx & Click range to include eight new sets with flaring tools and manual pipe benders. Remscheid – The new comprehensive Mixx & Click range for many applications in the area of sanitary/heating/AC as well as automotive comprises eight different sets with flaring tools and manual pipe benders for pipes made of various materials and featuring various strengths and diameters: The boerdex 1101-2333 flaring tool set for cooling systems and refrigeration technology is available in five different compilations for flaring copper and light-alloy pipes of various material hardnesses and diameters. Each of the sets includes a flaring tool made of pressure-cast zinc, steel-clamping jaws, a cone and a 3-35 mm pipe cutter supplied in a GEDORE i-BOXX ® 72. The 1101-2340 double flaring tool set is recommended for standard precision flares to DIN 74234 on brake lines, hydraulic pipes or similar with a wall strength of 0.7 to 1.0 mm. It is
6
Embed
de.gedore.com · Web viewThanks to its freely selectable initial bending ange, the 1100-2431 manual bending tool set facilitates bending soft copper pipes to EN 1037 – even if they
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GEDORE presents extended range of flaring tools and manual pipe benders
GEDORE is extending its Mixx & Click range to include eight new sets with flaring tools and manual pipe benders.
Remscheid – The new comprehensive Mixx & Click range for many
applications in the area of sanitary/heating/AC as well as automotive
comprises eight different sets with flaring tools and manual pipe benders for
pipes made of various materials and featuring various strengths and
diameters:
The boerdex 1101-2333 flaring tool set for cooling systems and
refrigeration technology is available in five different compilations for
flaring copper and light-alloy pipes of various material hardnesses
and diameters.
Each of the sets includes a flaring tool made of pressure-cast zinc,
steel-clamping jaws, a cone and a 3-35 mm pipe cutter supplied in a
GEDORE i-BOXX® 72.
The 1101-2340 double flaring tool set is recommended for standard
precision flares to DIN 74234 on brake lines, hydraulic pipes or
similar with a wall strength of 0.7 to 1.0 mm. It is available in two
variants for metric pipes as well as for metric and imperial pipes.
Equipment includes a basic frame made of malleable cast iron, steel
clamping jaws, a 4-32 mm deburring reamer and an ultra-small 4-16
mm pipe cutter supplied in a GEDORE i-BOXX® 72.
Thanks to its freely selectable initial bending ange, the 1100-2431 manual bending tool set facilitates bending soft copper pipes to EN
1037 – even if they feature a fixed jacket – and thin-walled precision
steel pipes and pipes made of NE metals. The scope of supply also
includes a long ½” reversible ratchet for even easier bending. The set
in the GEDORE L-BOXX® 136 comprises a bending lever, five
bending formers to 90 degrees for pipes with diameters of 6 to 15 mm
and a pipe cutter for diameters of 3 to 35 mm.
The 1101-2785 manual bending tool set is suitable for precision
steel pipes to EN 1035-3/DIN 2394, hydraulic pipes to EN 1035-1/DIN
2391 with wall strengths of 0.75 to 1.0 mm and bendable stainless
steel pipes with wall strengths of 1.0 mm. In the GEDORE i-BOXX®
72, it is now supplied with five instead of four bending formers to 180
degrees made of high-strength aluminium for pipes with diameters of
3 to 10 mm, a pipe cutter for 4 to 16 mm and a deburring reamer for 8
to 35 mm stainless steel pipes.
The 1100-2786 manual bending tool set is suitable for precision
steel pipes to EN 10305-3/DIN 2394, hydraulic pipes with wall
strengths of 1.0 to 2.0 mm, multi-layer composite pipes to 16 mm and
bendable stainless steel pipes with wall strengths of 1.0 to 1.5 mm.
Apart from the basic body, the GEDORE L-BOXX® 136 also includes
eight instead of six bending formers to 180 degrees for pipes with
diameters of 6 to 18 mm, a pipe cutter for 3 to 35 mm and a 3 mm pin
punch. The pipe bender can be clamped in a parallel vice or used
stationarily with an optional tripod no. 268500.
The 1100-2788 manual bending tool set in the L-BOXX® 136
combines the working ranges offered by 1101-2785 and 1101-2786 in
a single device. It bends precision steel pipes to EN 10305-3/DIN
2394, hydraulic pipes with wall strengths of 0.75 to 2.0 mm, multi-
layer composite pipes to 16 mm and bendable stainless steel pipes
with wall strengths of 1.0 to 1.5 mm. The L-BOXX® contains a ½”
reversible ratchet, ten bending formers for pipes (3-4, 5, 6, 8, 10, 12,
14, 15, 16, 18 mm), a pipe cutter for 3 to 35 mm and a 3 mm pin
punch. Up to pipe diameters of 10 mm, the pipe bender can be
clamped into a parallel vice or used as bending pliers; as of 12 mm, it
can also be used stationarily with an optional tripod no. 268500.
The 1100-245680 bending tool set features a hydraulic drive.
Accordingly, less force is required when bending soft or heat-
insulated copper pipes to EN 1037 with diameters of up to 22 mm,
multi-layer composite pipes to 20 mm or precision steel pipes with a
wall thickness of 18 x 1.5 mm. In the GEDORE L-BOXX® 136, the
bending device is supplied with seven bending formers for pipes with
diameters of 10 to 22 mm, the corresponding counter-supports, a
pipe cutter and a deburring reamer.
The 1100-245681 bending tool set avails of a reinforced hydraulic
drive and is suitable for soft or heat-insulated copper pipes to EN
1037 with diameters of up to 22 mm, multi-layer composite pipes to
20 mm, precision steel pipes with a wall thickness of 18 x 1.5 mm and
for annealed 18 x 1.2 mm stainless steel pipes. The GEDORE L-
BOXX® 136 also includes ten bending formers for pipes with
diameters of 6 to 22 mm, the corresponding counter-supports and a
3-35 mm pipe cutter.
GEDORE boerdex tool set for flaring copper and light alloy pipes.
About GEDORE
GEDORE is one of the world's leading brands for premium tools. The fam-ily company has been manufacturing high-quality tools since 1919. With more than 16,000 products, GEDORE offers the widest range of any European tool manufacturer. All over the world, GEDORE stands for high quality, innovative strength, high performance and reliability as well as optimum service.
The internationally successful company based in Remscheid employs more than 2,500 people at its five German sites as well as production fa-cilities in Brazil, England, Austria and South Africa. GEDORE is represented in more than 70 countries throughout the world. The GEDORE Group also includes the carolus brand which stands for sound tools offering quality assurance “by GEDORE” and the premium OCHSENKOPF brand – a tradi-tional specialist in excellent forestry tools.
www.gedore.de
Should you require any further information, please do not hesitate to contact us at any time.rheinfaktorAgentur für Kommunikation GmbHUlrich EschZollstockgürtel 5750969 KölnTel.: +49 221 [email protected]