DC7000 - Low Energy Swing Door Operator A Few Applications: Banks Urgent Care Facilities Patient Facilities Patient Rooms Doctor’s Offices Rest rooms Colleges & Universities Schools & Libraries Single Door Application (Dual Application Available) Features & Benefits: • Three zone opening with independent open, check, and hold values • Adjustable open acceleration and deceleration rates • Two zone closing with built in close speed adjustment • On/off/hold open switch • Two digit display with three button interface for adjustments • Built in strike interface with dedicated relay and connector for lock • Adjustable Torque Limiting – allows faster door operation without compromising safety • Adjustable Obstruction Sensing – if obstruction is encountered during door opening, stalls temporarily, then switches to an independently adjustable seek speed to complete cycle • Selectable Close Recycle – if obstruction is encountered during door closing, recycles door open, with independently adjustable time delay. • Selectable Push To Open – automatically cycles door if a cycle is initiated manually, with independently adjustable time delay • 24VDC accessory output for powering accessories up to 0.5 ampere total load • Built in power supply • Easy installation and adjustment • Optional length header available, Standard 39”. • Available in clear or dark bronze anodized finish. • Push plate switches available. See Reverse Side For Details 888-833-7857 ext. 308 • [email protected]