PowerFLAT 5x6 AM15540v2 5 6 7 8 1 2 3 4 Top View D(5, 6, 7, 8) G(4) S(1, 2, 3) Features Order code V DS R DS(on) max. I D P TOT STL130N8F7 80 V 3.6 mΩ 120 A 135 W • Among the lowest R DS(on) on the market • Excellent FoM (figure of merit) • Low C rss /C iss ratio for EMI immunity • High avalanche ruggedness Applications • Switching applications Description This N-channel Power MOSFET utilizes STripFET F7 technology with an enhanced trench gate structure that results in very low on-state resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching. Product status link STL130N8F7 Product summary Order code STL130N8F7 Marking 130N8F7 Package PowerFLAT 5x6 Packing Tape and reel N-channel 80 V, 3.0 mΩ typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package STL130N8F7 Datasheet DS9349 - Rev 5 - February 2020 For further information contact your local STMicroelectronics sales office. www.st.com
16
Embed
Datasheet - STL130N8F7 - N-channel 80 V, 3.0 mΩ typ., 120 ...N-channel 80 V, 3.0 mΩ typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package STL130N8F7 Datasheet DS9349 -
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PowerFLAT 5x6
AM15540v2
5678
1 2 3 4
Top View
D(5, 6, 7, 8)
G(4)
S(1, 2, 3)
FeaturesOrder code VDS RDS(on) max. ID PTOT
STL130N8F7 80 V 3.6 mΩ 120 A 135 W
• Among the lowest RDS(on) on the market• Excellent FoM (figure of merit)• Low Crss/Ciss ratio for EMI immunity• High avalanche ruggedness
Applications• Switching applications
DescriptionThis N-channel Power MOSFET utilizes STripFET F7 technology with an enhancedtrench gate structure that results in very low on-state resistance, while also reducinginternal capacitance and gate charge for faster and more efficient switching.
Product status link
STL130N8F7
Product summary
Order code STL130N8F7
Marking 130N8F7
Package PowerFLAT 5x6
Packing Tape and reel
N-channel 80 V, 3.0 mΩ typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL130N8F7
Datasheet
DS9349 - Rev 5 - February 2020For further information contact your local STMicroelectronics sales office.
Figure 12. Test circuit for resistive load switching times
AM01468v1
VD
RG
RL
D.U.T.
2200μF VDD
3.3μF+
pulse width
VGS
Figure 13. Test circuit for gate charge behavior
AM01469v1
47 kΩ1 kΩ
47 kΩ
2.7 kΩ
1 kΩ
12 V
IG= CONST100 Ω
100 nF
D.U.T.
+pulse width
VGS
2200μF
VG
VDD
Figure 14. Test circuit for inductive load switching anddiode recovery times
AM01470v1
AD
D.U.T.S
B
G
25 Ω
A A
B B
RG
GD
S
100 µH
µF3.3 1000
µF VDD
D.U.T.
+
_
+
fastdiode
Figure 15. Unclamped inductive load test circuit
AM01471v1
VD
ID
D.U.T.
L
VDD+
pulse width
Vi
3.3µF
2200µF
Figure 16. Unclamped inductive waveform
AM01472v1
V(BR)DSS
VDDVDD
VD
IDM
ID
Figure 17. Switching time waveform
AM01473v1
0
VGS 90%
VDS
90%
10%
90%
10%
10%
ton
td(on) tr
0
toff
td(off) tf
STL130N8F7Test circuits
DS9349 - Rev 5 page 6/16
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,depending on their level of environmental compliance. ECOPACK specifications, grade definitions and productstatus are available at: www.st.com. ECOPACK is an ST trademark.
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or servicenames are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.